Beton Concrete

Technische Änderungen vorbehalten. Subject to technical modification without notice.
TESTING
Bestell-Nr.
Order no.
2.1090
2.1085.01
2.1085.02
2.1085.03
2.1085.04
2.1085.05
2.1085.06
2.1085.07
2.1085.08
2.1085.09
2.1085.10
2.1085.11
2.1085.12
2.1085.13
2.1087.01
2.1087.02
2.1087.03
Beton
Concrete
Compression and bending testing machines,
heavy duty design
Compression/bending testing machine
3000/100 kN
DIN 51220, 51223, 51227; class 2
ISO 4012; class 1
With separate control panel,
pressure-gauge display, manual control,
2 measuring ranges for compression and
2 measuring ranges for bending.
Compression range: 200 - 1000 kN
600 - 3000 kN
Bending range: 10 - 50 kN
20 - 100 kN
Platens: 300 mm diam.
Test chamber size of
compression tester: 320 mm
Piston stroke of
compression tester: 50 mm
Test chamber size of
bending tester: 220 mm
Piston stroke of
bending tester: 220 mm
400 V / 50 Hz
For reduction of the test chamber size:
Distance piece 210 x 210 x 110 mm
Distance piece 170 x 170 x 50 mm
Distance piece 120 x 120 x 50 mm
Accessories
Shutoff valve for the respectively lower measuring
range
Load pacer
Quick-release valve
Platens 320 x 520 mm
(Instead of 300 mm diam.)
Chrome-plated columns
Protective grid for machine with platens:
300 mm diam.
320 x 520 mm
Electrical piston stroke limiter
Extension of piston stroke to 100 mm
Prefilling pump for faster piston stroke
Blade holder for two upper blades for
three-point loading as per DIN 1048
Pressure piston for curb testing
Platen insert in bending chamber, 230 mm diam.,
top platen with pendulum axle
TESTING Bluhm & Feuerherdt GmbH . Berlin Tel.: 030 / 755 90 94 . NL Neuss Tel.: 0 21 31 / 74 05 60 . www.testing.de
2
2.73