ENGR 121 Homework 7 Note: Problems 1 through 4 are individual ...

Example Debug Terminal:Bring your Boe-Bot to class next time ready to demonstrate.5. Install your breadboard, solenoid valves, conductivity sensor, pump, overflow tank, salty and DI water tanks and alltubing on your fishtank platform as shown. You are free to move things around to suit your preferences. Rememberthat you will need to screw your “Board of Education” from the Boe-Bot onto the platform later, so save a place for it.You can use a large rubber band or a small tie-down strap to secure the pump and fishtank around the verticalmember of the fishtank platform (how you attach these things is up to you). Bring your completed system to classnext time.The other solenoid valve is on the opposite side (not in view).