HOST BAR

Arctic Cat Traction by
Arctic Cat Traction by
A. EXCEL
80° CARBIDE (5/16-IN. THREAD)
There’s no compromise in quality or workmanship
on this competitively priced stud. Strength is built
into the 5/16-in. shank and 80° carbide tip for
reliable, economical performance on the trail.
B. MEGA-BITE
60º CARBIDE (5/16-IN. THREAD)
Sno cross racers demand enhanced performance,
and the Mega-Bite delivers. The unique design of
four flat sides on the penetration portion provides
additional contact surface for added control under
changing trail conditions.
A D
B
C
E
C. GOLD DIGGER ® TRACTION MASTER ®
60º CARBIDE (5/16-IN. THREAD)
The standard that all other traction devices are
measured against. A sharp 60° carbide tip gives
you superb trail traction and durability on hardpacked
snow and ice.
D. TRACTION MASTER STAINLESS STEEL
60º CARBIDE (5/16-IN. THREAD)
The premier stud design for riders looking for a
stainless steel stud with the quality and performance
of the original Gold Digger Traction Master.
TUNE YOUR SLED’S HANDLING TO YOUR RIDING STYLE.
Determining the proper traction and control is simple. What’s your riding style: a conservative trail rider, a
performance trail rider or a competition rider? Look at the chart below, find the line with the horsepower
of your sled. Look under your riding category. Here you will discover the approximate number of studs and
the length of the carbide wearbar you should use. This information is meant to be a guide.
STUD AND WEARBAR SELECTION
SEE YOUR DEALER FOR SPECIFIC MODEL APPLICATIONS.
PERFORMANCE PERFORMANCE/
SLED TRAIL TRAIL COMPETITION
STUD QUANTITY/INCHES OF TURNING CARBIDE
30–60 HP 48/4-IN. 96/6-IN. 120/6-IN.
60–75 HP 72/4-IN. 96/6-IN. 120/6-IN.
75–100 HP 96/6-IN. 120/6-IN. 144/8-IN.
100–125 HP 120/6-IN. 144/8-IN. 144–168/10-IN.
120–130 HP 144/8-IN. 168/10-IN. 168–192/10-IN.
125–150 HP 168/10-IN. 192/10-IN.* 192/10-IN.*
130–170 HP
STUD PLACEMENT ON TRACK
192/10-IN. 192/10-IN.* 192/10-IN.*
100% in center belt. 70% in center belt, 65% in center belt,
Or 80% in center belt,
20% in outside belts.
30% in outside belts. 35% in outside belts.
*Consider competition wearbars with 5 in., 8 in., or 10 in. of carbide.
RECOMMENDED STUD LENGTH (IN.)
EXCEL, SPT,
TRACK MEGA-BITE, POWER
HEIGHT TRACTION MASTER POINT
.750 .875
.850 .920 .960
1.000 1.075 1.080
1.250 1.325 1.375
1.375 1.450 1.500
Our manufacturer’s suggested retail prices exclude freight, handling and installation. Prices, package quantities, specifications and materials may change without notice.
F
NEW
Arctic Cat traction products are now available in
package quantities of 24, 102, and 150. These
quantities will give you the best combinations for
both 121-in. and 128-in. tracks.
We have priced our 102 packs the same as
competitive 96 packs, and our 150 packs the
same as competitive 144 packs.
G
E. SPT
80º CARBIDE (5/16-IN. THREAD)
The competitive pricing on this black-coated stud
makes it a real value. Features an 80º carbide, with
a 15/16-in. head to reduce track wear.
F. POWER POINT
60º CARBIDE (5/16-IN. THREAD)
If you’re looking for outstanding performance and
durability for both trails and sno cross tracks, then
go with this stud. Features a large 1-in. head and
a 60º carbide tip.
G. POWER POINT STAINLESS STEEL
60º CARBIDE (5/16-IN. THREAD)
This stud features the same great design as the
Power Point 60º Carbide, with the additional
corrosion resistance of stainless steel.
123
TRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION