HOST BAR

Recommendations

Info

Arctic Cat Traction by Arctic Cat Traction by A. EXCEL 80° CARBIDE (5/16-IN. THREAD) There’s no compromise in quality or workmanship on this competitively priced stud. Strength is built into the 5/16-in. shank and 80° carbide tip for reliable, economical performance on the trail. B. MEGA-BITE 60º CARBIDE (5/16-IN. THREAD) Sno cross racers demand enhanced performance, and the Mega-Bite delivers. The unique design of four flat sides on the penetration portion provides additional contact surface for added control under changing trail conditions. A D B C E C. GOLD DIGGER ® TRACTION MASTER ® 60º CARBIDE (5/16-IN. THREAD) The standard that all other traction devices are measured against. A sharp 60° carbide tip gives you superb trail traction and durability on hardpacked snow and ice. D. TRACTION MASTER STAINLESS STEEL 60º CARBIDE (5/16-IN. THREAD) The premier stud design for riders looking for a stainless steel stud with the quality and performance of the original Gold Digger Traction Master. TUNE YOUR SLED’S HANDLING TO YOUR RIDING STYLE. Determining the proper traction and control is simple. What’s your riding style: a conservative trail rider, a performance trail rider or a competition rider? Look at the chart below, find the line with the horsepower of your sled. Look under your riding category. Here you will discover the approximate number of studs and the length of the carbide wearbar you should use. This information is meant to be a guide. STUD AND WEAR<strong>BAR</strong> SELECTION SEE YOUR DEALER FOR SPECIFIC MODEL APPLICATIONS. PERFORMANCE PERFORMANCE/ SLED TRAIL TRAIL COMPETITION STUD QUANTITY/INCHES OF TURNING CARBIDE 30–60 HP 48/4-IN. 96/6-IN. 120/6-IN. 60–75 HP 72/4-IN. 96/6-IN. 120/6-IN. 75–100 HP 96/6-IN. 120/6-IN. 144/8-IN. 100–125 HP 120/6-IN. 144/8-IN. 144–168/10-IN. 120–130 HP 144/8-IN. 168/10-IN. 168–192/10-IN. 125–150 HP 168/10-IN. 192/10-IN.* 192/10-IN.* 130–170 HP STUD PLACEMENT ON TRACK 192/10-IN. 192/10-IN.* 192/10-IN.* 100% in center belt. 70% in center belt, 65% in center belt, Or 80% in center belt, 20% in outside belts. 30% in outside belts. 35% in outside belts. *Consider competition wearbars with 5 in., 8 in., or 10 in. of carbide. RECOMMENDED STUD LENGTH (IN.) EXCEL, SPT, TRACK MEGA-BITE, POWER HEIGHT TRACTION MASTER POINT .750 .875 .850 .920 .960 1.000 1.075 1.080 1.250 1.325 1.375 1.375 1.450 1.500 Our manufacturer’s suggested retail prices exclude freight, handling and installation. Prices, package quantities, specifications and materials may change without notice. F NEW Arctic Cat traction products are now available in package quantities of 24, 102, and 150. These quantities will give you the best combinations for both 121-in. and 128-in. tracks. We have priced our 102 packs the same as competitive 96 packs, and our 150 packs the same as competitive 144 packs. G E. SPT 80º CARBIDE (5/16-IN. THREAD) The competitive pricing on this black-coated stud makes it a real value. Features an 80º carbide, with a 15/16-in. head to reduce track wear. F. POWER POINT 60º CARBIDE (5/16-IN. THREAD) If you’re looking for outstanding performance and durability for both trails and sno cross tracks, then go with this stud. Features a large 1-in. head and a 60º carbide tip. G. POWER POINT STAINLESS STEEL 60º CARBIDE (5/16-IN. THREAD) This stud features the same great design as the Power Point 60º Carbide, with the additional corrosion resistance of stainless steel. 123 TRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION&CONTROLTRACTION
124 TRACTION & CONTROL D A. ALUMINUM SUPPORT PLATES A These aluminum washers are 50% lighter than steel, but just as tough. They feature a crowned profile for added strength. Available in round or square. 3639-384 ROUND 1-3/8-IN. X 5/16-IN. (24/PK) $12.95 $19.95 CAN 3639-091 ROUND 1-3/8-IN. X 5/16-IN. (102/PK) $47.95 $71.95 CAN 3639-385 ROUND 1-3/8-IN. X 5/16-IN. (150/PK) $70.95 $106.95 CAN 3639-386 SQUARE 1-1/4-IN. X 5/16-IN. (24/PK) $12.95 $19.95 CAN 3639-093 SQUARE 1-1/4-IN. X 5/16-IN. (102/PK) $47.95 $71.95 CAN 3639-387 SQUARE 1-1/4-IN. X 5/16-IN. (150/PK) $70.95 $106.95 CAN B. COLORED SUPPORT PLATES — SQUARE C. COLORED SUPPORT PLATES — ROUND Need some color? These aluminum plates feature a durable powder-coat finish. COLORED SUPPORT PLATES — SQUARE 2639-854 SQUARE 1-1/4-IN. X 5/16-IN. — GREEN (24/PK) $18.95 $28.95 CAN 3639-388 SQUARE 1-1/4-IN. X 5/16-IN. — GREEN (102/PK) $72.95 $109.95 CAN 3639-389 SQUARE 1-1/4-IN. X 5/16-IN. — GREEN (150/PK) $107.95 $161.95 CAN 2639-858 SQUARE 1-1/4-IN. X 5/16-IN. — ORANGE (24/PK) $18.95 $28.95 CAN 3639-390 SQUARE 1-1/4-IN. X 5/16-IN. — ORANGE (102/PK) $72.95 $109.95 CAN 3639-391 SQUARE 1-1/4-IN. X 5/16-IN. — ORANGE (150/PK) $107.95 $161.95 CAN 2639-866 SQUARE 1-1/4-IN. X 5/16-IN. — RED (24/PK) $18.95 $28.95 CAN 3639-392 SQUARE 1-1/4-IN. X 5/16-IN. — RED (102/PK) $72.95 $109.95 CAN 3639-393 SQUARE 1-1/4-IN. X 5/16-IN. — RED (150/PK) $107.95 $161.95 CAN 3639-870 SQUARE 1-1/4-IN. X 5/16-IN. — YELLOW (24/PK) $18.95 $28.95 CAN 3639-394 SQUARE 1-1/4-IN. X 5/16-IN. — YELLOW (102/PK) $72.95 $109.95 CAN 3639-395 SQUARE 1-1/4-IN. X 5/16-IN. — YELLOW (150/PK) COLORED SUPPORT PLATES — ROUND $107.95 $161.95 CAN 3639-402 ROUND 1-3/8-IN. X 5/16-IN. — GREEN (24/PK) $19.95 $29.95 CAN 3639-403 ROUND 1-3/8-IN. X 5/16-IN. — GREEN (102/PK) $79.95 $119.95 CAN 3639-404 ROUND 1-3/8-IN. X 5/16-IN. — GREEN (150/PK) $112.95 $168.95 CAN 3639-406 ROUND 1-3/8-IN. X 5/16-IN. — ORANGE (24/PK) $19.95 $29.95 CAN 3639-407 ROUND 1-3/8-IN. X 5/16-IN. — ORANGE (102/PK) $79.95 $119.95 CAN 3639-408 ROUND 1-3/8-IN. X 5/16-IN. — ORANGE (150/PK) $112.95 $168.95 CAN 3639-410 ROUND 1-3/8-IN. X 5/16-IN. — RED (24/PK) $19.95 $29.95 CAN 3639-411 ROUND 1-3/8-IN. X 5/16-IN. — RED (102/PK) $79.95 $119.95 CAN 3639-412 ROUND 1-3/8-IN. X 5/16-IN. — RED (150/PK) $112.95 $168.95 CAN 3639-414 ROUND 1-3/8-IN. X 5/16-IN. — YELLOW (24/PK) $19.95 $29.95 CAN 3639-415 ROUND 1-3/8-IN. X 5/16-IN. — YELLOW (102/PK) $79.95 $119.95 CAN 3639-416 ROUND 1-3/8-IN. X 5/16-IN. — YELLOW (150/PK) $112.95 $168.95 CAN D. DOUBLE DIGGER SUPPORT PLATES The dual mounting configuration on these aluminum plates offers greater stud rigidity. 2639-134 5/16-IN. (12/PK) $11.95 $18.95 CAN 2639-135 5/16-IN. (48/PK) $47.95 $71.95 CAN E CALL OR VISIT YOUR LOCAL ARCTIC CAT DEALER FOR MORE INFORMATION For a dealer near you, CALL 1-800-3-ARCTIC OR VISIT WWW.ARCTICCAT.COM C B NEW E. STEEL SUPPORT PLATES F These plates provide maximum stud support for rubber tracks. 3639-396 SQUARE 1-1/4-IN. X 5/16-IN. (24/PK) $6.95 $10.95 CAN 3639-397 SQUARE 1-1/4-IN. X 5/16-IN. (102/PK) $27.95 $42.95 CAN 3639-398 SQUARE 1-1/4-IN. X 5/16-IN. (150/PK) $37.95 $56.95 CAN F. POWER PLATE SUPPORT PLATES These durable support plates provide great stud support in a lightweight design. 2639-850 1-1/4-IN. X 5/16-IN. (24/PK) $12.95 $19.95 CAN 3639-095 1-1/4-IN. X 5/16-IN. (102/PK) $47.95 $71.95 CAN 3639-418 1-1/4-IN. X 5/16-IN. (150/PK) $70.95 $106.95 CAN POWER PLATE DOUBLE SUPPORT PLATES (NOT SHOWN) 2639-955 5/16-IN. (24/PK) $23.95 $35.95 CAN 2639-956 5/16-IN. (48/PK) $47.95 $71.95 CAN G. ANGLED SUPPORT PLATES These aluminum plates position the stud at an angle that allows greater penetration. 3639-399 5/16-IN. (24/PK) $14.95 $22.95 CAN 3639-400 5/16-IN. (102/PK) $57.95 $86.95 CAN 3639-401 5/16-IN. (150/PK) $84.95 $126.95 CAN DOUBLE DIGGER ANGLED SUPPORT PLATES (NOT SHOWN) 3639-431 5/16-IN. (12/PK) $14.95 $22.95 CAN 3639-432 5/16-IN. (48/PK) $57.95 $86.95 CAN G
Page 1 and 2: 88 DELUXE COVERS OUR COVER STORY SP
Page 3 and 4: 90 PREMIUM COVERS PREMIUM PROTECTIO
Page 5 and 6: 92 TOURING ACCESSORIES TOURING TO G
Page 7 and 8: 94 TOURING ACCESSORIES A A. SPORT P
Page 9 and 10: 96 TOURING ACCESSORIES C A. TANK PO
Page 11 and 12: 98 TOURING ACCESSORIES A B C A. RAC
Page 13 and 14: 100 VALUE KITS TRUE VALUE Get creat
Page 15 and 16: 102 WINDSHIELDS GET WIND OF THESE A
Page 17 and 18: 104 CUSTOM ACCESSORIES TURN ON THE
Page 19 and 20: 106 CUSTOM ACCESSORIES A D A. HEADL
Page 21 and 22: 108 CUSTOM ACCESSORIES A A. BELLY P
Page 23 and 24: 110 B CUSTOM ACCESSORIES A. WINDSHI
Page 25 and 26: 112 ZR 120 ACCESSORIES PUT KIDS FIR
Page 27 and 28: 114 DELUXE ACCESSORIES FIRST-CLASS
Page 29 and 30: 116 MOUNTAIN CAT ACCESSORIES CLIMBI
Page 31 and 32: 118 PERFORMANCE ACCESSORIES HIT YOU
Page 33 and 34: 120 TRACTION & CONTROL
Page 35: 122 TRACTION & CONTROL STICK TO THE
Page 39 and 40: 126 OIL & CARE POUR IT ON You bough
Page 41 and 42: 128 OIL & CARE A E. ARCTIC CAT ANTI
Page 43 and 44: 130 GENERAL MAINTENANCE SPRING PREP
Page 45 and 46: 132 GENERAL MAINTENANCE B C A. CAT
Page 47 and 48: 134 GENERAL MAINTENANCE A A. FUNNEL

HOST BAR

Create successful ePaper yourself

Delete template?

Save as template?