Brochure - Shimadzu Scientific Instruments

Additional Software for Windows (Option)Static Testing Software (requires basic software, available separately) P/N 347-39717Static TestingStatic testing includes tensile, compression, and 3- and 4-pointbending. Capable of displaying elastic modulus, upper yield point, loweryield point, yield strength, intermediate test force, intermediatedisplacement, maximum test force, break point, energy, and other data.stressstrain-stressstrainFrequency Sweep / Resonant Frequency Tracking Software (requires basic software, available separately)(includes two types of software)P/N 347-39720-04Frequency Sweep TestingFrequency can be varied incrementally to measure dynamic characteristicvalues. Sweep endurance testing is also possible.Resonant Frequency Tracking TestingResonant frequencies can be detected within seconds. Resonantfrequencies can also be tracked during tests.A random wave is generated todetect resonant frequency withinseconds.Test Jigs (Option)* For information about testing jigs not shown below, contact your Shimadzu representative.Pin type grip for flat specimensManual non-shift gripfor flat specimensCompression platesDrill gripThree-point bending test jig(for printed circuit boards)Three-/four-point bending test jigfor plasticsTest device for constanttemperature atmosphere testsSafety guard7