HAZET – Safety Spring Vice 4900

Ingenious ToolsCalliper Gauge for Brake DiscsSR• For measuring the thickness of the brake discs(wear/abrasion of the brake disc)Follow vehicle manufacturer’s instructions!• With fixing screw and sliding vernier(vernier 1 ⁄10)• With crowned measuring surfaces• In leather case1 4for passenger cars and motorcycles,measuring range: 60 mm,jaw length: 75 mm4956-1 073160for commercial vehicles and motorbusses,measuring range 100 mm, jaw length 115 mm4956-2 073177CSpecialty ToolsBrakesWheel Hub Grinder1 4for wheel hubs with stud bolts(grinding zone ? 40 or 50 mm),e.g. FORD, PORSCHE, VOLVO, Japanese carscontents: 2 grinding pads, 6 grinding wheels each:? 40 mm and 50 mm4960-45/14 132234&for wheel hubs on passenger carsup to a ? of 160 mmcontents: 1 grinding pad, 3 grinding wheels ? 160 mm4960-160/4 1322873 Replacement grinding wheels, ? 160 mm4960-0160/3 1322635 Replacement grinding wheels, ? 40 mm4960-040/5 1322945 Replacement grinding wheels, ? 50 mm4960-050/5 132300Mandrels with Abrasive RingsRAssembly Tool• For installing and removing the draw spring ofhand brake shoes, e.g. on MERCEDES-BENZpassenger cars with rear disc brakesas well as on VW LT since 1997• Hook with T-Handle• Special steel• Surface chrome-plated1 K 44964-1 162 055708Brake Adjusting ToolRa R7Wheel Hub Grinder&C• For removing rust and dust,e.g. from the fit drills of floating callipersor the ABS sensor location hole etc.• Operation with e.g. a hand drill orflexible extension• ? 16 mm, e.g. for floating callipers on VW Golf,Passat, Polo, etc.• ? 18 mm, e.g. the ABS sensor location hole onBMW, VW-AUDI, etc.• ? 22 mm, e.g. for the floating callipers on OPEL1 t 4Mandrel with 50 abrasive rings4961-16/51 16 0993134961-18/51 18 0993204961-22/51 22 099634Mandrel4961-16 16 0995284961-18 18 0995354961-22 22 09954225 abrasive rings4961-016/25 16 1115654961-018/25 18 1115724961-022/25 22 11158950 abrasive rings4961-016/50 16 0995594961-018/50 18 0995664961-022/50 22 099573• For adjusting hand brakes (brake cable)on different car models,especially for VW-AUDI, BMW, FORD,OPEL Astra G, Vectra B and MAZDA• Tubular box wrench Ä 10 mm• Plastic handle• Chrome-Vanadium• Surface chrome-platedNot suitable for vehicles withautomatic hand brake adjusting1 S K 44965-1 10 300 050598Brake Line Wrencha ROptimal cleaning of wheel hubs and brake discs• Prevents the falsification of the wheelbolt tightening torque originated by corrosion• Patented hook and loop fastener for fastchanging of grinding wheels• Wear-resistant grinding wheels– 4960-45/14: approx. 50 vehicles per wheel(40, 50 mm ?)– 4960-160/4: approx. 100 vehicles per wheel(160 mm ?)• Open pored abrasive material and cup formedgrinding pad reduce the formation of dust to aminimum• 10 mm 3-point pin, e.g. for the use in (air) drills• Max. 1,500 rpm• No formation of sparks (the lower the speed thebetter the grinding quality)BSpecial Tool for Brakes• For installing and removingspring plates the holding deviceof brake linings on drum brakes,e.g. on VW, SEAT, SKODA,OPEL and RENAULT with reardrum brakes• Push- and turn-part with carbidecoating layer in front working area• Plastic handle• Chrome-Vanadium• Surface chrome-plated1 K 44963-1 237 050383R• For screwing the union nuts on brake lineson BMW, VW-AUDI, FORD, MERCEDES-BENZ,MITSUBISHI, NISSAN, PEUGEOT, RENAULT,VOLVO– also on vehicles without anti-lock brake system• Flare nut insert tool• j drive 6.3 = 1 ⁄4”or square insert 9 x 12 mm• Chrome-Vanadium• Surface chrome-plated1 S 44966-11 11 0590104966-12 12 059027206 Components and Spare Parts see pages 228 to 236