TABLE OF CONTENTS - Martin Archery

CHANGING THE DRAWYour Tru-ARC+ uses two differentcam sizes to cover the full rangeof draw lengths. Each cam covers 4" ofdraw in half inch increments. Both camsuse the same module. Refer to your dealeror www.martinarchery.com to find outwhat module position gets which drawlength on your cam. You dealer canexchange cams if needed to attain yourdraw length.To move the modules, you will needto remove or loosen the mod screwsand rotate the mod to the proper letter.Higher letters give longer draw lengths.Short drawTopBottomLong drawSTRINGING DIAGRAMControl StringSplit StringShooting StringTop ModuleChanging Draw LengthBottom ModuleTopDraw lengthindicatorsBottomThere is no need to press your bow when changing your draw length onthe new Tru-Arc+. Your modules are lettered A through G. Each letter willchange your draw ½”. Make sure that both cams are in the same draw settingto keep them both working together.8