TABLE OF CONTENTS - Martin Archery

MULTIDIRECTIONAL TEARThis tear may signal:•More than one problem with accessory adjustment.Move nock adjustment first until the tear is horizontal and followInstructions for horizontal tear.•Clearance Problem.See that the arrow has adequate fletching clearance.•Wheels may be out of time.Check wheel timing.•Irregular or inconsistent shooting form.See a qualified archery coach or professional and have them check your technique.PERFECT HOLEThis pattern shows clean arrow flight. The point and fletchingimpacted the same location. Your bow is now ready to shoot or you maywant to continue and try some of the super fine tuning methods.AFTER ADJUSTINGAfter you have completed these steps and have achieved good paper testresults, it is best to try it at fifteen and twenty feet just to make sure you did not get a falsereading. A good rule to go by when paper tuning is to move your nock point or arrow restopposite the tear when using a release. In some rare cases if this does not clear up your tearyou may need to move your accessories in the same direction as the tear.15