T&B Conduit Fittings

More documents

Recommendations

Info

T&B Conduit FittingsRigid Metal Conduit FittingsSpecifications—Rigid Metal Conduit/PVC Coated Rigid Metal Conduit (continued)For further details and completeinformation please refer to the following:1. ANSI C80.1…Rigid Steel ConduitZinc Coated, Specifications for2. ANSI C80.2…Rigid Steel Conduit,Enameled, Specifications for3. ANSI C80.5…Rigid AluminumConduit. Specifications for4. ANSI C80.4…Fittings for Rigid MetalConduit and Electrical MetallicTubing, Specifications for5. WW-C-581…Federal Specification,Conduit, Metal, Rigid & Coupling,Elbow, and Nipple, ElectricalConduit, Zinc Coated6. WW-C-540…Federal Specification,Conduit, Metal, Rigid (Electrical,Aluminum)7. WW-C-571…Federal Specification,Conduit, Metal, Rigid, and Coupling,Elbow, and Nipple, ElectricalConduit Enameled8. U.L. 6…Standards for Safety. RigidMetal Conduit9. U.L. 2142…Standards for Safety.Intermediate Metal Conduit10. ANSI C33.84…Standards forSafety, Outlet Boxes and Fittings11. CEC Section 12-1100…Rigid andFlexible Conduit12. CSA C22.2 No. 45…SafetyStandards for Rigid Metal Conduit13. CSA C22.2 No. 18…SafetyStandards for Outlet Boxes,Conduit Boxes and Fittings14. NEMA FB-1…StandardsPublication. Fittings and Supportsfor Conduit and Cable Assemblies15. A-A-50553 Federal Specification.Fittings for Conduit Metal Rigid(Thickwall & Thinwall [EMT] Type)Please NoteThe excerpts and other material herein, whether relating to theCanadian Standards Association, the Underwriters Laboratories, Inc.listing, to industry practice or otherwise, is not intended toprovide all relevant information required for use and installation.Reference to original or primary source material and data ismandatory before any application or use is made of the product.6
T&B Conduit FittingsRigid Metal Conduit FittingsSuggested Specifications for Rigid Metal Conduit/PVC Coated Rigid Metal Conduitand Fittings meets 2002 CEC Rule 2-112Cat. #CP8KOPR-SHIELD** TM of Jet-Lube, Inc.Series 1451Knockout PlugCat. #AP8ALUMA-SHIELD ®Series 1470Plug, Conduit/Fitting• Rigid ferrous metal conduit or PVCcoated rigid conduit prior to coatingshall be of the hot dipped galvanizedtype adequately protected againstcorrosion inside and outside includingthreads, and conforming to thefollowing applicable specifications:-Rigid Ferrous Metal Conduit FederalSpecification WW-C-581/ANSIC80.1/U.L. 6/CSA C22.2 No. 45-PVC Coated Ferrous Metal ConduitApplicable listed under (i) and inaddition conforming to NEMAPublication No. RNI-1974 (Type A)PVC coating on conduit and associatedfittings shall have no sags,blisters, lumps or other surfacedefects and shall be free of holes.• Rigid nonferrous metal conduit shallconform to Federal SpecificationWW-C-540/ANSI C80.5/U.L. 6/CSAC22.2 No. 45.• All field cuts shall be square, reamedand deburred. Conduit threads shallbe tapered for entire length with 3 ¼4”taper per ft. Conduit threads prior toassembly shall be clean and coatedwith grease metallic type conductivecompounds such as series CP8KOPR-SHIELD for ferrous conduit orseries AP8 ALUMA-SHIELD fornonferrous(aluminum) conduit as manufacturedby Thomas & Betts.• To prevent ingress of plaster, dirt,trash or moisture in raceways, boxes,fittings and equipment during courseof construction, all open ends shallbe closed with rugged thermoplasticplugs as manufactured by Thomas &Betts, series 1470 and 1451. Plugsshall be firmly secured in place toprovide adequate seal and shall befunctionally unaffected by moisture.Thermoplastic plugs shall be rated at105°C/221°F and have a U.L.flammability rating of 94V-1.7
Page 1: T&B Conduit FittingsTable of Conten
Page 4 and 5: T&B Conduit FittingsGeneral Informa
Page 8 and 9: T&B Conduit FittingsRigid Metal Con
Page 10 and 11: T&B Conduit FittingsRigid Metal Con
Page 12 and 13: T&B Conduit FittingsRigid and Inter
Page 14 and 15: ttT&B Conduit FittingsRigid and Int
Page 54 and 55: T&B Conduit FittingsElectrical Meta
Page 56 and 57:
T&B Conduit FittingsElectrical Meta
Page 58 and 59:
T&B Conduit FittingsEMT FittingsSho
Page 60 and 61:
T&B Conduit FittingsFlexible Cord a
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
T&B Conduit FittingsPortable Cord a
Page 80 and 81:
T&B Conduit FittingsPortable Cord a
Page 82 and 83:
T&B Conduit FittingsService Entranc
Page 84 and 85:
T&B Conduit FittingsService Entranc
Page 86 and 87:
T&B Conduit FittingsLiquidtight Fle
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
T&B Conduit FittingsArmoured Cable
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
T&B Conduit FittingsNonmetallic She
Page 120 and 121:
Page 122 and 123:
Page 124:
Page 127 and 128:
Type LTT&B Conduit FittingsLiquatit
Page 129 and 130:
T&B Conduit FittingsLiquatite ® Fl
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Type CEA—Non-Halogen, Low Smoke,
Page 137 and 138:
Type ZHLA—Non-Halogen, Low Smoke,
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Corrlok ® System—Type CLFR, Low
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Flexible Metal Conduit (Extract fro
Page 157 and 158:
T&B Conduit FittingsConduit—Chemi
Page 159 and 160:
T&B Conduit FittingsConduit—Chemi
Page 161 and 162:
Alphanumeric IndexCatalogue Page Ca
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Notes175
show all

T&B Conduit Fittings

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?