Serial RS-232 Logger User Guide - SerialGhost Wi-Fi
Serial RS-232 Logger User Guide - SerialGhost Wi-Fi
Serial RS-232 Logger User Guide - SerialGhost Wi-Fi
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Serial</strong>Ghost <strong>Wi</strong>-<strong>Fi</strong>Recording dataRecord mode is the default mode of operation for the <strong>Serial</strong>Ghost <strong>Wi</strong>-<strong>Fi</strong> data logger. In recordmode, the device will silently monitor the bidirectional data flow on the serial bus and store thecaptured data on the internal Flash Drive in file LOG.TXT.The <strong>Serial</strong>Ghost <strong>Wi</strong>-<strong>Fi</strong> must first be configured to the appropriate serial bus parameters, suchas baud rate. Refer to section Configuration for detailed instructions.Installation of the <strong>Serial</strong>Ghost <strong>Wi</strong>-<strong>Fi</strong> in record mode is quick and easy, no software or driversare required. Simply plug it in-line on the serial bus, using the DB-9 or DB-25 connectors. Thedevice may be powered from a standard USB port, using the supplied cable. Alternatively, anexternal +5V DC (min. 200 mA) power supply may be used to power the device through themini-USB port (cell phone chargers with USB connectors are well suited for this).<strong>Serial</strong>Ghost in record mode powered from aUSB port.<strong>Serial</strong>Ghost in record mode powered by anexternal 5V DC (min. 200mA) power supply.12Copyright © 2013 KeeLog
Change language