Nylon Cable Chain with removable frames - Apneumatika

®Self-SupportingCapacity DiagramThe maximum length of theself-supporting capacity ( LS2)in relationship to the weightof the cables and hosescontained per linear metre.End BracketsThe end brackets set allows the two ends of the chain to beattached to the equipment.Nylon TypeBright Zinc Plated SteelType*SR400Nylon Cable Chainwith removable frames109876Additional load (kg)54,543,532,521,5100,5 1 1,5 2LS Max unsupported length22,5Fig. AChain fixed outside/inside theradius. (Fig A)Fig. BChain fixed outside the radius. (Fig B)See end brackets mountingvariations page 31.3LS2LS50 L8 1750178L40The red marking in thediagram area considers thedifference of weight betweenvarious widths of chain.ø5,5ø5,5ø5,5ø5,5F6,51512FLSFor applications with2and weights not included inthe area of the diagramshowing self-supportingcapacity, verify the possibleuse of support rollers (seepage 30).ChainFTypemmSR400 C=40 50SR400 C=60 70Nylon TypePart NumbersComplete Set AssembledChain End BracketsTypeSetSR400 C=40 AN400KMSR400 C=60 AN400KMComplete Set UnassembledChain End BracketsTypeSetSR400 C=40 AN400KSR400 C=60 AN400KChainFTypemmSR400 C=40 30SR400 C=60 50Bright Zinc Plated SteelType Part NumbersComplete Set AssembledChain End BracketsTypeSetSR400 C=40 AP400KM1SR400 C=60 AG400KM1Complete Set UnassembledChain End BracketsTypeSetSR400 C=40 AP400K1SR400 C=60 AG400K1* Available on request in stainless steelHow to open the cover.Special tool to remove theconnecting pivots:Part Number PZ010.For further information pleaseconsult Brevetti Stendalto’sTechnical Office69