Plunger Valves - Szele-Tech Bt.

Plunger ValvesØ 25Ø 25G 1/4"Ø 6E1515SW 22SW 22Ø 155,59 53C B AArt. No. 63.021Ø 4G 1/4"Art. No.63.02263.02363.024A B C D E61 12 20 3/8" 3/8"61 10 22 1/2" 3/8"68 10 40 1/2" 3/8"Ø 6DVacuum fittingØ 30SW 303/8”Operating principle:Plunger valves are used like flow valvesand flow constrictors in setups in whichonly part of the workpieces are covered.Their strong points are reliable operationand relative intensitivity to contaminants.112803/8” 63The valves are normally closed and springloaded.Operation of the pushrod will releasethe vacuum.Vacuum fittingNote:For installation outside the suction plate(opening/closing vacuum)239Ø 8M 20 x 116,8G 1/4”Art. No. 63.03412,2 10 2SW 17Ø 40452,33024 66,512Stroke 10 mm11/2002Art. No. 63.035 Art. No. 63.032®VacuumboreFIPA GmbHVAKUUM-TECHNOLOGYØ 6M 30 x 1,5G 1/4”Recommended suction cups:102.060.303102.080.304102.095.305D-85737 Ismaning Telefon +49/89/96 24 89 -0Freisinger Str. 30 Telefax +49/89/96 24 89-11www.fipa-online.com e-mail: info@fipa-online.com7,2Plastic

Plunger Valves270.129.O(Topl)179270.130.O(Top)323,5"A"G 1/8"Ø 6.5SW 14"A"G 1/2"Ø 12.5SW 301015270.129.U(Bottom)O-RingArt. No. 270.129(complete)Ø 5Ø 8Ø 121.52227AArt. No. 270.130(complete)270.130.U(Bottom)O-RingØ 8Ø 12Ø 251.53543AC1GG1Art. No. C C1 ØD G G1 L L1 Hub H SWFlow in m³/hat Pu = 0.6 bar63.025 37 9 11 G1/4" G1/8" 52 1,5 10 11 3.4663.026 37 9 11 G1/4" G1/8" 55 1,5 13 11 3.4663.027 37 9 11 G1/4" G1/8" 47 1,5 5 11 3.46SWLCHSuction cupØ DL1GSWGSWLBB1C3BHC2C3BHC2SaugerLB11/2002HØ DArt. No. 63.028Ø ERecommended suction cups: Ø E1102.025.047102.030.053102.035.056102.040.061StrokeArt. No. B B1 C2 C3 ØD ØE ØE1 G G1 L H SW BH63.02863.02963.030® D-85737 IsmaningFreisinger Str. 30www.fipa-online.comL1*Art. No. 63.029Recommendedsuction cup:102.050.065Art. No. 63.030Recommendedsuction cups:102.060.068._102.080.073._102.095.075._HØ DG 1Flow in m³/hat Pu = 0.6 bar7 8,5 8 13 2 6,5 10 G1/8" -- 27,5 6,0 14 5 1,087 9 8 13 2 8 14 G1/8" -- 28,5 6,5 14 5 1,0812 -- 8 13 5 -- -- G1/4" M10x1,25 35 9,0 17 5 1,12FIPA GmbHVAKUUM-TECHNOLOGYSuction cupL1**L1 is a functionof the cup usedTelefon +49/89/96 24 89 -0Telefax +49/89/96 24 89-11e-mail: info@fipa-online.com

Flow Valves with flow pinFlow Valves, self-cleaningFlow valves (with flow pin)*Optimum installation = horizontal1/4” threadSW 1795923Flow pinG 1/4”Spring-levelerfittingSuction cupfittingTechnical description, Art. Nos. 63.036 - 63.038:Flow valves are used above all for handling parts ofdifferent dimensions. They prevent the vacuum circuitfrom collapsing.A flow pin (with bore) in their interior guarantees acontrolled volume flow for each of the grabbers used.When suction is applied, the valve will automaticallyclose the cross-section of the suction line, allowing asmall volume to enter the valve through the bore in theflow pin. Flow valves have only a minimum leakageloss and can be installed in any desired position*.They are free from wear and operating noise andsuitable for fast cycle times.Art. Nr. Cup dia. Flow-pin Min. requiredrecommended bore dia. suction capacity63.03663.03763.03860 mm80 mm95 mm0,8 mm1,2 mm1,5 mm0,6 m³/h1,0 m³/h2,0 m³/hNote:The operation of these valves is similar to that ofautomatic closing valves "with leakgage loss"Flow valves (self-cleaning)Optimum installation = horizontalArt. No.63.01363.01563.016Min. required suctioncapacity in m³/hfor system pressurePu of -0.3 bar2.32.32.3Min. required suctioncapacity in m³/hfor system pressurePu of -0.6 bar3.33.33.3Max. flow inm³/h duringblow-off(P = 5 bar)272727G 1/4”G 1/4”Ø 8G 1/4”Ø 8SW 17214105252944023 6111011G 1/4”Ø 7Recommended suction cups:Ø 9RecommendedØ 7102.060.303 20.030.044Ø 14 suction cups:102.080.304 20.040.05423.033.039Ø 13,5102.095.305 22.044.03423.043.096Ø 2020.050.05823.053.033Art. No. 63.01320.050.06421.032.079Recommended20.050.06521.043.049suction cup:20.060.072 Art. No. 63.015 Art. No. 63.01621.062.055 23.075.151Ø 54Ø 511/2002FIPA GmbHVAKUUM-TECHNOLOGY® D-85737 IsmaningFreisinger Str. 30www.fipa-online.comTelefon +49/89/96 24 89 -0Telefax +49/89/96 24 89-11e-mail: info@fipa-online.com

Automatic Closing Valves (with leak loss)The automatic closing valves of this series will activate the vacuum only when the suction cup with the valve has madefull contact with the workpiece. If one ore more of the cups do not make full contact as the vacuum is applied, the suctionto the cups not covered will automatically be cut off, vacuum to the remaining setup being fully maintained.The valves come with a filter to prevent contamination. However, they are not suitable for use in highly contaminatingand dirty environments. The valves have only minor leakage loss..The valves can easily be retrofitted. Valve No. 63.003 can be readjusted (over its default settings.)Valves Nos. 63.001 and 63.002 as well as 63.008 - 63.012 are permanently adjusted.Art. No.63.00163.00263.00363.00863.00963.01063.01163.012Min. required suctioncapacity in m³/hfor system pressurePu of -0.3 bar0.220.24min. 0.1/max. 2.40.240.120.220.70.7Min. required suctioncapacity in m³/hfor system pressurePu of -0.6 bar0.43.0.47min. 0.2/max. 4.340.470.220.431.41.4Max. flow inm³/h duringblow-off(P = 5 bar)15.721.933.421.92.315.737.237.0G 1/8"G 1/4"5010G 1/8"SW 14G 1/4"SW 17G 1/4"5048,56Art. No. 63.001Installation in any desired positionArt. No. 63.002Installation in any desired position8GFB1BF1G11/2002Art. No. 63.003G 1/4"SW 17RegulationbuttonSW 3Installation in any desired positionFIPA GmbHVAKUUM-TECHNOLOGYArt. No. G B B1 F F1 SW63.008 G1/4" 36 26 11 10 1763.009 M5 20 15,5 4,5 4,5 863.010 G1/8" 34 26 8,5 8 1463.011 G3/8" 39 29 12 10 2263.012 G1/2" 41 29 14 12 27® D-85737 IsmaningFreisinger Str. 30www.fipa-online.comOptimuminstallation:horizontalTelefon +49/89/96 24 89 -0Telefax +49/89/96 24 89-11e-mail: info@fipa-online.com