Plunger Valves - Szele-Tech Bt.

Automatic Closing Valves (with leak loss)The automatic closing valves of this series will activate the vacuum only when the suction cup with the valve has madefull contact with the workpiece. If one ore more of the cups do not make full contact as the vacuum is applied, the suctionto the cups not covered will automatically be cut off, vacuum to the remaining setup being fully maintained.The valves come with a filter to prevent contamination. However, they are not suitable for use in highly contaminatingand dirty environments. The valves have only minor leakage loss..The valves can easily be retrofitted. Valve No. 63.003 can be readjusted (over its default settings.)Valves Nos. 63.001 and 63.002 as well as 63.008 - 63.012 are permanently adjusted.Art. No.63.00163.00263.00363.00863.00963.01063.01163.012Min. required suctioncapacity in m³/hfor system pressurePu of -0.3 bar0.220.24min. 0.1/max. 2.40.240.120.220.70.7Min. required suctioncapacity in m³/hfor system pressurePu of -0.6 bar0.43.0.47min. 0.2/max. 4.340.470.220.431.41.4Max. flow inm³/h duringblow-off(P = 5 bar)15.721.933.421.92.315.737.237.0G 1/8"G 1/4"5010G 1/8"SW 14G 1/4"SW 17G 1/4"5048,56Art. No. 63.001Installation in any desired positionArt. No. 63.002Installation in any desired position8GFB1BF1G11/2002Art. No. 63.003G 1/4"SW 17RegulationbuttonSW 3Installation in any desired positionFIPA GmbHVAKUUM-TECHNOLOGYArt. No. G B B1 F F1 SW63.008 G1/4" 36 26 11 10 1763.009 M5 20 15,5 4,5 4,5 863.010 G1/8" 34 26 8,5 8 1463.011 G3/8" 39 29 12 10 2263.012 G1/2" 41 29 14 12 27® D-85737 IsmaningFreisinger Str. 30www.fipa-online.comOptimuminstallation:horizontalTelefon +49/89/96 24 89 -0Telefax +49/89/96 24 89-11e-mail: info@fipa-online.com