Fuel & Lube - Denunzio Racing Products

Enduro Cell Racing BladdersThe Enduro Cell combines state of the art technology with specially formulated polymer materials to create afuel cell for racers looking to meet the FIA-FT3 approval at an economy price. Comes with a 3-year warranty.Standard Features:• Very Durable Specially Formulated Polymer Fuel Cell• Full Foam Baffling• Single 3/8” or 1/2” Pick-up & one 1/2” Vent Check Valve Fitting• Internal Fuel Strainers• 3” Standard Plate with Rollover Valve• Steel ContainerOptional Equipment:• Remote & Flush Cap Fillers• Aluminum Container• Twin 3/8” or 1/2” Pick-ups• Sending Unit• 1” Vent Check Valve Fitting• Surge Tank and CollectorsNote: Cells can be made on their side (for verticalmounting) by special order (w/ aluminum can only.)Race Safe Circle Tack Fuel CellsThe Race Safe Circle Track Fuel Cell is an economical yet quality cell designed for the budget racer.Comes with a 2-year warranty. Note: Should be mounted in the main confines of the chassis and roll cage,not designed for high impact situations.Standard Features:• Very Durable “Cross-Linked” Polyethylene Fuel Cell• Full Foam Baffling• One 1/2” Pick-up & one 1/2” Vent Check Valve Fitting• 3” Standard Plate with Rollover ValveOptional Equipment:• 2 1/4” or 3” Remote Plate withRollover Valves• Twin 3/8” or 1/2” Pick-ups• Sending Unit• 1” Vent Check Valve Fitting• Surge Tank and Collectors• Steel/Aluminum ContainersRace Safe Drag Racing Fuel CellsThis is another economical yet quality fuel cell for the budget racer. Comes with a 2-year warranty.Note: Should be mounted in the main confines of the chassis and roll cage, not designed for high impact situations.Standard Features:• Very Durable “Cross-Linked” Polyethylene Fuel Cell• Full Foam Baffling• Flush Mount Aircraft Style Cap, 2 1/2” Sump w/ 2 1/2” Pick-upFittings & one 1/2” Vent Check Valve FittingOptional Equipment:• Remote Filler• Sending Unit• 1” Vent Check Valve Fitting800-622-3939Tech Line: 805-683-1211www.denunzioracing.com29

FUEL CELL FILL PLATESStandard PlatesStandard 6X10 Fill Plate263-SF6X10A 3” Filler CapStandard 6X10 Fill Plate263-SF6X10B 2-1/4” Filler CapSprint Car & Midget Plates263-SF6X10C Blank Pick-up Plate263-SF4X6A Top Flush Cap Fill PlateStandard 4X6 Fill Plate263-SF4X6D 2-1/2” Threaded CapMulti-Location PlatesStandard 4X6 Fill Plate263-SF4X6B 2-1/4” Filler Cap263-SF4X6C 2-1/4” Tall NeckRemote Fill ValvesMulti-Location 6X10 Plate263-ML6X10ARemote Fill ValvesW/ Roll Over Valves, 4-3/4” B.C.263-FV245A 2-1/4”, 45°263-FV290A 2-1/4”, 90°263-FV245B 2-1/2”, 45°263-FV290B 2-1/2”, 90°263-FV390 3”, 90°Remote 3” Fill Valve263-CTR300-90Multi-Location 6X10 Plate263-ML6X10B 1” Check Valve263-ML6X10C 1-3/4” Check Valve263-ML6X10D 2” Check ValveQuick-Fill 45° Fill Plate263-QF245 2-1/4” Roll Over Valve263-QF345 3” Roll Over ValveRemote 2-1/4” Fill Valvesw/ Roll Over Valves, 5-3/8” B.C.263-CTR-225-45 45°263-CTR-225-90 90°30800-622-3939Tech Line: 805-683-1211www.denunzioracing.com

DRY BREAK VALVESDry Break Valvew/ HandleDouble Dry Break ValvesSpecify 4-1/2” or 100mm center.263-DBM275263-DBM225 Male Probe263-DBF225 Female ReceptacleRedhead ® Dry Break ValvesLegal for NASCAR, USAC, IMSA, SCCA, AND SCORE.Mounts in various locations, this valve makes refuelingsafe and easy. It automatically closes whien the maleprobe is withdrawn to prevent any fuel spillage.Flows at 2 gal./second.263-DBM200 Male Probe Redhead®263-DBF300 Female Receptacle Redhead®Redhead Double Dry Break ValvesSpecify 4-1/2” or 100mm center.263-DBM225R263-DBF225RMale Probe Redhead®Female Receptacle Redhead®Dry Break ValvesSpecify 2”, 2-1/4”, or 2-1/2” when ordering.263-DBM225A Male Probe263-DBF225A Female ReceptacleDry Break Valves263-DBF225B Female 4” B.C263-DBF225C Female 4-3/4” B.C.Dry Break Rebuild KitsBlank Aluminum PlatesGaskets263-PP20F263-PP20MFemaleMale263-OBP024 24 Bolt Oval, 6x10263-OBP012 12 Bolt Oval, 4x6263-CBP012 12 Bolt Circle, 4-3/4” B.C.263-CBP010 12 Bolt Circle, 3-1/2” B.C.263-CBP006 8 Bolt Circle, 2” B.C.263-CBP004 4 Bolt Circle, 1-5/8” B.C.263-OG024 24 Bolt Oval, 6x10263-OG012 12 Bolt Oval, 4x6263-CG012 12 Bolt Circle, 4-3/4” B.C.263-CG012CT 12 Bolt Circle, 5-3/8” B.C.263-CG010 10 Bolt Circle, 3-1/2” B.C.263-CG006C 6 Bolt Circle, 2” B.C.263-CG006B 6 Bolt Circle, 2-3/8 B.C.263-CG004 4 Bolt Circle, 1-5/8” B.C.32800-622-3939Tech Line: 805-683-1211www.denunzioracing.com

DISCRIMINATOR AND VENT VALVES1/2” Vent Check ValveFill Plate Mount:263-ITV08 1/2” For Remote Fill263-ITV08S 1/2” For Standard FillInline Mount:263-ITV06IL 3/8”263-ITV08IL 1/2”In-Tank Check ValveMounts in the bladder or cell.263-ITV100 1”263-ITV175 1-3/4”Roll Over Valve3/8” Inline roll over valve.263-RV38ACCESSORIESDescriminator ValvesOffering the ultimate in fuelventing, these valves eliminate theneed for a catch can and offershut-off during roll-overs andrefueling.263-DV100 1”263-DV175 1-3/4”Fuel & Vent FittingsThese fittings help you set up your fuelcell as quickly and easily as possible.Specify -6 or -8 fittings.263-HF90 90° Hose Barb263-HF45 45° Hose Barb263-HF00 Straight Hose BarbFiller Necks & CapsFiller Necks:263-FN175 1-3/4”, Threaded263-FN225 7/8” x 2-1/4” O.D.263-FN225A 1-1/4” x 2-1/4” O.D., Alum.263-FN225L 2-3/4” x 2-1/4” O.D.263-FN250 2-1/2” O.D., Threaded263-FN300 1” x 3” O.D.263-FN300L 3” x 3” O.D.Caps:263-FC175 1-3/4” Non-Vented, Threaded263-FC225 2-1/4” Non-Vented263-FC225V 2-1/4” Vented263-FC250 2-1/2” Non-Vented, Threaded263-FC300 3” Non-Vented4” Filler Neck & CapThis neck & cap set is an excellentchoice for off-road use.263-FN400 4” Remote Neck263-FC400 4” Bail CapStrapsGold cad-plated straps are availableto fit all cells and bladders. To orderadd “-S” to part number.Example: “263-PC108-S.”Rubber ElbowsFor use with remote fill plates.263-RE90-3 90° 3”263-RE45-3 45° 3”263-RE90-2-1/4 90° 2-1/4”263-RE45-2-1/4 45° 2-1/4”Filler & Vent HoseFiller Hose:263-CH300 3” I.D.263-CH250 2-1/2” I.D.263-CH225 2-1/4” I.D.263-BH225 2-1/4” I.D., Reinf. (Black)263-CH200 2” I.D.263-CH200WB 2” w/ Wire Reinf.Vent Hose:263-CH175 1-3/4” I.D.263-CH137 1-3/8” I.D.263-CH100 1” I.D.263-CH100W 1” w/ Wire Reinf.263-CH100B 1” I.D. w/ Nylon Reinf.Electronic Sending UnitThese electronic fuel level sendingunits are designed without movingparts for added durability. Sendertube can be cut for proper tank depth.For a fully-adjustable low-level light,add “-L” to the part #.263-SU012 12” Sending Unit263-SU024 24” Sending Unit263-GA200 Fuel Gauge800-622-3939Tech Line: 805-683-1211www.denunzioracing.com33

Holley ® Electric Fuel Pump & RegulatorThis Holley “positive displacement” pump (motor-driven rotary vane-type) will provide a constant fuel flow with nopulsation and will operate off any 12-volt, positive or negative ground system. It features a cleanable inlet filterscreen, 3/8” pipe, and a sturdy cast aluminum housing. The motor is an extra long-life, heavy duty design, sealeddry, and equipped with a built-in reilief valve for automatic pressure compensation. This pump should not be usedwith alchohol, methanol, or fuel injection systems. The use of high-pressure springs will shorten pump life.High-Pressure PumpThis pump is designed for“race” applications and is presetto approximately 14 psi. Itwill flow 70 GPH @ 9 psi. Freeflowcapacity is 110 GPH.Holley regulator #333-12-803is supplied with this pump.333-12-802 High Pressure PumpHigh-Pressure RegulatorThis regulator comes packagedwith all 333-12-802 high-pressurepumps. It can be adjustedto regulate pressure from 4-1/2to 9 psi. Two regulators are recommendedfor use with 2x4 bblapplications.333-12-803 High Pressure RegulatorPaxton Fuel PumpThis fuel pump from Paxton is the ultimate inhigh performance and reliability. Fuel flow is90 GPH at 45 psi; maximum pressure is 90 psi.Draws 12 amps at 12 volts.225-8001688 Paxton Fuel PumpFacet ® Electric Fuel PumpFacet fuel pumps fit all carburetor-equipped vehicle applications.Constructed without rubber diaphrams or seals, thesepumps are compatible with all fuels, and a self-priming design(up to 12” of fuel lift) means there’s no long cranking timeafter you’ve run out of fuel. The solid-state design and platedsteel construction insure a long, reliable life.Maximum flow is 35 GPH.264-40106 Facet Electric Fuel PumpFram ® Fuel FilterThese fuel filters are designed for use on anyengine requiring fuel flows up to 90 gph; theyhave a 10 micron nominal rating. Recommendedmax operating pressure is 200psi.Fittings are 3/8”-18 NPTF. Mounting bracketand one filter element included.262-HPG1 Fram Fuel Filter262-HPGC1 Replacement Element34800-622-3939Tech Line: 805-683-1211www.denunzioracing.com

Perma-Cool ® Six-Pass Oil CoolersThese tough 5/8” aluminum tube and 1-1/2” wide aluminum fin designcoolers feature the proprietary Turbulator tube design for maximumcooling effiency. Available with an integral 10” fan design for thosehigh-load, low-speed applications. All come with 3/8” FPY tube ends,and a limited lifetime warranty.With FanPartNumber601-12311601-12315601-12318Size(in.)3.75x10.5x144x10.5x184x10.5x21FanType10 blade4 blade4 bladeDraw(amps)7.06.86.8Airflow(cfm)90012501250Without FanPartNumber601-2311601-2315601-2318Size(in.)1.5x10.5x141.5x10.5x181.5x10.5x18Transmission CoolersThese Perma-Cool ® trans coolers feature 1/2”aluminum tubes with the Turbulator ® design,and -6 AN fittings. Sizes listed in inches.601-1020 0.75x5x12.5601-1021 0.75x5x15.5601-1022 0.75x7.5x12.5601-1023 0.75x7.5x15.5601-1024 0.75x10x15.5601-1025 0.75x10x12.5Heavy-Duty Transmission CoolersThese Perma-Cool ® coolers are made with the same durableconstruction and design as the coolers above, butfeature 5/8” tubes, 3/8” FPT fittings, and twice the coolingfin width for extreme cooling needs. Sizes listed in inches.601-1310 1.5x3.5x14601-1311 1.5x7x14601-1315 1.5x7x18601-1316 1.5x7x21601-1318 1.5x10.5x21Electric Cooling FansThese fans are ideal for primary cooling duties. All of these fans can be mountedin either “push” or “pull” configuration, and feature dual ball-bearing armaturesupport motors. 10” and 12” fans have glass-filled nylon blades. 14”, 16”, and18” fans have aluminum fan blade assemblies. All fans use a 30 amp fuse.Wiring kits with automatic thermal switches are available, please inquire.Fan Dia.(# ofBlades)10” (4)12” (10)14” (6)16” (6)18” (6)AmpDraw6.87.59.59.810.3Est.CFM12501650295029502500MotorRPM2100240018001750500Min.MountingArea (in.)13x10.5x2.512.5x12.5x3.7514x14x3.7516x16x3.7517.75x17.75x3.75PartNumber601-19010601-19008601-19114601-19115601-19117800-622-3939Tech Line: 805-683-1211www.denunzioracing.com35

High Performance Racing Oil CoolerThis is the answer to oil temperature problems. A trulyhigh performance system, this cooler is constructed of largehalf-inch copper tubing for fast heat dissipation. The rugged,fully-collared aluminum fin construction guaranteesmaximum heat transfer.135-3001 High Performance Oil Cooler (1/2” hose)135-3003 Racing Oil Cooler (AN-8 fittings)Perma-Cool ® Competetion Oil CoolersAll Perma-Cool ® oil coolers are constructed with their exclusive Turbulator ® tube design that increases innersurface area by 350%. All fo these coolers feature thermally cured, aerospace epoxy construction and efficientaluminum materials for a contaminant-free cooler environment. Pressure tested to 300 psi.Competition Oil CoolersConstructed with 5/8” copper tubingand aluminum fins, these headeredcoolers provide the highest BTUtransfer with the least amount ofresistance to high-volume flow.601-201, -301, and -501 have 1/2”FTP fittings. Others have 3/4” FTPfittings. Single row coolers providemaximum cooling in low-airflowlocations; double row coolersprovide optimum cooling above40 mph airflow.Aluminum CompetitionOil CoolersAll aluminum tube and finstyle coolers have 5/8”tubes, side-by-side entryand exit prots, and 1/2”FTP fittings, except 601-203, which has 3/8” FTPfittings.PartNumber601-201601-301601-501601-601601-302601-402601-502601-602TubeNumber3456681012RowTypeSingleSingleSingleSingleDoubleDoubleDoubleDoubleFlow(gpm)3-104-144-161-184-165-205-225-24Size(in.)1.5X6X181.5X8X201.5X9.5X201.5X11.5X203X6.5X163X8.5X163X10X163X12X16PartNumber601-203601-303601-503601-603601-303PassNumber4681012Flow(gpm)3-104-144-161-184-16Size(in.)1.5X6X181.5X8X201.5X9.5X201.5X11.5X203X6.5X16Steve De NunzioSand Drag Champion, 1997-9936800-622-3939Tech Line: 805-683-1211www.denunzioracing.com

OIL FILTERS, ADAPTERS & MOUNTSK&N PerformanceOil FilterNothing cleans better thanthe Performance Oil Filterfrom K&N. The PerformanceOil Filter efficiency ratingmeets or exceeds all highperformanceautomotive andaircraft engine builders’standards.PartNumber432-HP-3001432-HP-1002432-HP-2003432-HP-2002432-HP-3002O.D.(in)3.813.813.813.813.81Ht.(in.)5.224.224.224.225.22ThreadDim.3/4-163/4-1613/ 16-1613/ 16-1613/ 16-16GasketNo.432-04368432-04368432-04368432-04493432-04493Spin On Oil AdaptersSpin On adapters convert the oil filter landing on the engine block to an oil passagefor use with a remote oil cooler and/or a remote oil filter. These adapters are diecast from aerospace quality aluminum and are machine finished on a CNC productionline. O-rings are included. Brass fitting and AN adapters are sold separately.There are 9 different sizes available to meet your particular configuration.Call us with your specifications and we will help you choose the correct adapter.Remote Oil Filter MountsPerma-Cool Remote Oil Filter Mounts are die cast from aerospace quality aluminum and are CNC machine finished.The filter mounts listed below are single mounts and are available with ports up, ports right and ports leftconfigurations. All feature 1/2” FPT ports and 3/4”-16 threads. Brass fittings and AN adapters are sold separately.Remote Oil Filter Mounts, Single-Mount601-1211 Ports Up601-1701 Ports Left601-1711 Ports RightParallel Flow Remote Oil Filter MountsParallel flow mounts allow for more than double the filtration. They are excellent for use with high viscosityoils and optimally suited for high volume oil systems. Available as both single and dual mounts. Both mountsfeature dual inlet and outlet ports and allow for your choice of oil flow directions. 1/2” FPT ports and 3/4”-16threads. Includes two pipe plugs. Brass fittings and AN adapters sold separately.Parallel Flow Remote Oil Filter Mounts601-1791 Single Filter Mount601-1221 Dual Filter MountTrans Filter MountThe trans filter mount is a single mount with 1/4” inlet and outlet ports and a 1/8”NPT port for oil temperature or pressure sending unit. Ports are configured up.3/4”-16 threads. Brass fittings and AN adapters sold separately.601-5021 Trans Filter MountO-Rings, Gaskets, Nipples and Sleeve NutsReplacement o-rings, gaskets, nipples and sleeve nuts are available in a variety of sizes. Oil filter mountsand adapters in other sizes are also available. Please call us for more information or to place order.“800-622-3939Tech Line: 805-683-1211www.denunzioracing.com37

5 Gallon Fuel JugThe square design of these jugs eliminates unusable spaces around the jug, and allowsthem to be placed flush against walls and other flat surfaces. The funnel top design andmolded handle helps bleed air into the jug, allowing an entire jug to be emptied in just 9seconds. These jugs can be ordered in standard or ribbed design.Available in several colors: Red, Blue, Yellow, White708-6220 5-Gallon Jug1”2”2 1 /4”Dump CansThese square design dump cans have special side vent tubes to relieve backpressure and allow fuel to flow freely into gas tank; the handle doubles as an airintake tube. Openings can be cut to three different sizes: 1”, 2” and 2-1/4”. Afuel hose can be attached to all flow openings with a hose clamp or zip tie.Constructed of heavy-duty plastic. Available in 6-gallon and 11-gallon sizes.335-6R 6-Gallon Dump Can 335-11R 11-Gallon Dump CanFunnelThe anti-vortex design of these funnels allows for faster fill rates. Extra top lipadded to prevent splashing. Made from high-impact resistant polypropylene.Stores flat and is washable with soap or solvent. Neck reduces to fit unleadedgas fillers. Large 14” diameter. Available in straight (90°) and 45° angles.708-6110R Funnel, 90° 708-6115R Funnel, 45°Dump SpoutEvery second is critical in the pit! Thesetime-saving dump spouts feature a built-inair intake tube that speeds up pouring fromfuel jugs and allows for spill-free pouringwithout the need for a funnel.225-105 Dump SpoutShown with5-gallon jugSiphon PumpThis heavy duty siphon pumpalso fits 2” IPS threads but allows7 gallons to flow per minute.268-450-SP Heavy DutySiphon PumpTeam De NunzioRefueling in the BFG Pitat the 1998 PRIMM 300We finished this raceSecond, by only2 minutes38800-622-3939Tech Line: 805-683-1211www.denunzioracing.com