Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain ...

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers fo...SI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release SystemsManufacturers of ASME/ANSI Approved Drain Covers andASME/ANSI/ASTM Approved Safety Vacuum Release SystemsManufacturers of ASME/ANSI A112.19.8-2007 Approved Drain CoversThe following companies, listed alphabetically, manufacture pool and spa drain covers of various sizesand have represented to CPSC staff that their covers meet the ASME/ANSI A112.19.8-2007 standard,as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(i).The staff is providing this information as a convenience to pool owners and operators. The CPSC doesnot provide approval or endorsements for any of these companies or their products. Other companiesnot listed may also manufacture products that meet the requirements of the law.Last updated 12/19/2008●●●A&A ManufacturingDivision of Shasta Industries Inc.3750 West Indian School RoadPhoenix, AZ 85019Tel (800) 851-8492Fax (602) 5324896Michael MarshallMichael.Marshall@aamfg.comwww.UnblockableDrain.comDimensions: 3 1/2" x 31" channel drainAfras Industries Inc.766 Hampshire Road, Unit AWestlake Village, CA 91361Reza AfsharTel: (805) 230-0011Fax: (805) 230-0062www.afrasinc.comAquaStar Pool Products Inc.http://www.cpsc.gov/businfo/draincman.html (1 of 6)12/23/2008 12:53:22 PM

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers fo...SI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release Systems1666 Garnet Ave #224San Diego, CA 92109Wade ArensTel (877) 768-2717 ext 2Fax (877) 276-POOLwade@aquastarpoolproducts.comwww.aquastarpoolproducts.comDimensions: 8" round, 10" round, 9"x9" square, 12"x12" square, 18"x18" square, 24"x24"square, 32"x 3 1/2" channel drain●●●●BALBOA Water Group1382 Bell AveTustin, CA 92780Bob SpillarTel: (714) 955.6240Fax: (714) 384.0335Bob.Spillar@BalboaWater.comwww.BalboaWater.comCommercial Pool & Spa Supplies Inc.1167 East Hwy 36Maplewood, MN 55109Bill SoukupTel (877) 842-4455Fax (651) 765-9924billsoukup@commercialpool.comwww.commercialpoolseminars.comDimensions: 28" x 30" (outside dimensions)Current Systems Inc.Peter DavidsonRiverflow Pumps621 Via Alondra Ste. 607Camarillo, CA 93012805-482-1091 Phone805-482-1041 Faxpdavidson@current-systems.comwww.current-systems.comDimensions: Grate sizes: 18" x 23"; 18" x 42"; 24" x 24"Drain Safe/New Water SolutionsRon SchroaderLake Worth, FLTel (561) 433-2580Ron@drainsafe.comwww.drainsafe.comDimensions: 11" diameter cover, will fit 5 1/2" - 8" Diameter Sumps, and retrofit smaller 5"http://www.cpsc.gov/businfo/draincman.html (2 of 6)12/23/2008 12:53:22 PM

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers fo...SI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release Systemssumps with additional knockouts●●●●●●Eureka Manufacturing Co.PO Box 1473Bismarck, ND 58502Cathryn BinstockTel (701) 223-7932Fax (701) 258-5423cathryn@eurekamanufacturing.comwww.eurekamanufacturing.comHayward Pool Products61 White Cap DriveNorth Kingstown, RI 02852Joe DiOrio, Product ManagerTel (401) 583-1107Fax (401) 583-1407jdiorio@haywardnet.comwww.haywardnet.com/safety1Dimensions: 8" Round, 9"x9" Square, 12"x12" Square, 18"x18" SquarePaddock Industries Inc.555 Paddock ParkwayRock Hill, SC 29730Mike Schuett, Executive Vice PresidentTel (800) 849-2729www.paddockindustries.comDimensions: 20”x20” and 24”x24”, can be installed in multiplesParamount Pool and Spa Systems295 E. Corporate Place, Ste. 100Chandler, AZ 85225Dominic Conn, Director of EngineeringTel (480) 893-7607DCONN@1paramount.comwww.1paramount.comDimensions: Will fit drains up to 10” diameterSan Antonio Gary Equipment Company Inc.438 Sandau RoadSan Antonio, TX 78216-3621Tassie ZarsTel 210.341.5255Fax 210.341.5154www.GaryEquipment.comretro@garypools.comWaterway Plasticshttp://www.cpsc.gov/businfo/draincman.html (3 of 6)12/23/2008 12:53:22 PM

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers fo...SI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release Systems2200 E. Sturgis Rd.Oxnard, CA. 93030Ray Mirzaei, Certified EngineerTel (805) 981-0262waterway@waterwayplastics.comwww.waterwayplastics.comDimensions: 8" and 10" covers, and 9"x9" and 12"x12" grates●World Wide Sports LLC112 South Hanley RoadSuite 101St. Louis, MO 63015-3418Harry NewhartTel (314) 863-0040www.worldwidesportsllc.comDimensions: 13" diameter cover, fits 5" to 10" roundManufacturers of ASME/ANSI A112.19.17 or ASTM F2387 ApprovedSafety Vacuum Release SystemsThe following companies, listed alphabetically, manufacture safety vacuum release systemsand have represented to CPSC staff that their systems meet the ASME/ANSI A112.19.17 orASTM F2387 standards, as required by the Virginia Graeme Baker Pool and Spa Safety Act,Section 1404(c)(1)(A)(I).The staff is providing this information as a convenience to pool owners and operators. TheCPSC does not provide approval or endorsements for any of these companies or their products.Other companies not listed may also manufacture products that meet the requirements of thelaw.Last updated 12/08/2008●A.O. Smith EPC531 North Fourth StreetTipp City, OH 45371www.aosepc.com/Products/eMod/[Note: eMod model also qualifies as an automatic pump shut off system.]Midwest and NortheastGreg FritzTel (937) 609.6342Florida / Southeasthttp://www.cpsc.gov/businfo/draincman.html (4 of 6)12/23/2008 12:53:22 PM

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers fo...SI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release SystemsJohn AlexanderTel (813) 335.0879WestBill DeCorrevontTel (602) 300.4664●●●●●Emotron Inc.1005 N. Holland Sylvania Rd.Toledo, OH 43615Paul HackettTel 419-842-2233Fax 419-866-1506paul.hackett@usa-emotron.comwww.usa-emotron.comHayward Pool Products61 White Cap DriveNorth Kingstown, RI 02852Joe DiOrio, Product ManagerTel (401) 583-1107Fax (401)583-1407jdiorio@haywardnet.comwww.haywardnet.com/safety1Pentair Water Pool and Spa1620 Hawkins AvenueSanford, NC 27330Customer Service: (800) 831-7133Customer Service Fax: (919) 566-8926Technical Service: (800) 831-7133Steve BarnesSteve.Barnes@PentairWater.comwww.PentairPool.comStingl Products LLCSterling, VATony SirianniTel (888) 749.5433Tel (571) 434-6010Fax (571) 434.6013tonysirianni@stinglproducts.comwww.stinglproducts.comVac-Alert Industries LLCSanta Rosa, CA 95401Paul Penningtonhttp://www.cpsc.gov/businfo/draincman.html (5 of 6)12/23/2008 12:53:22 PM

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers fo...SI A112.19.17 or ASTM F2387 Approved Safety Vacuum Release SystemsTel (800) 374-7405Fax (707) 576-8286www.vac-alert.com●Vacless Systems Inc. Pool and Spa Safety ProductsSimi Valley, CA 93063John SteffenTel (877) 822-5377Tel (818) 899-1700Fax (818) 899-1744john@vacless.comwww.vacless.comConsumer Safety (Home) | About CPSC | Library | Businesshttp://www.cpsc.gov/businfo/draincman.html (6 of 6)12/23/2008 12:53:22 PM