Wire saw technology

EXAMPLES FOR WIRE SAWING OPERATIONSCutting a wall openingFor making a rectangular opening four steps are necessary. Thewire is led through two prepared core drilling holes at the cornersof the area to be cut. Wire guide pulleys and swivel rolls lead thediamond wire from the machine to the cut.assembly of a wire saw for vertical cutsFor horizontal cuts the diamond wire can be guided on itsshortest way to a horizontal cutting position by means of parallelpositioned swivel rolls.assembly of a wire saw for horizontal cuts(seen from an upper position)The wire saw operating as an immersion sawIf the diamond wire connot be led around the material to be cutdue to structural reasons the wire saw is operated with the help ofimmersion columns. Two immersion rolls are placed into correspondingblind hole drillings.The wire „immerses“ into the material to be cut.immersion columns with prepared slurry removalmax. immersion depth 2500 mmblind hole drilling Ø 250 mmWire sawing in narrow areasBy means of swivel rolls the diamond wire can be led to the cutthrough cramped areas of narrow passages.CEDIMA ® Diamantwerkzeug- und Maschinenbaugesellschaft mbHLärchenweg 3 • 29227 Celle/DeutschlandTel. +49 (0)51 41 / 88 54 - 0 • Fax +49 (0)51 41 / 86 42 7Internet: www.cedima.com • E-Mail: info@cedima.com16