Wire saw technology

HYDRAULIC DRIVESset of hoses 3-partsExamples for connection• CSA-1001 H + HAG-12.10 + hydraulic control panel HSP-12• CSA-100 H + HAG-12.20 with additional control panel for feedoil flow wire driveoil flow feedset of hoses 3-partsset of hoses 2-partsHSP-12set of hoses 2-partsNecessary components for the operation of CSA-1001 H CSA-100 HCSA-1001 automatic wire saw with 2 swivel rolls and 10 storage rolls, without wire drive unit and wire drive wheel X- - - wire drive unit for CSA-1001 H with hydraulic motor (45 oder 63 cm³) and drive wheel guard X- - - wire drive wheel Ø 600 mm with interchangeable bandage XCSA-100 automatic wire saw with 2 mini swivel rolls, 8 storage rolls and ground mouting foot, without wire drive motor XHM-19/23 hydraulic motor (19 or 23 cm³) for drive of drive wheel X- - - set of hoses 3-parts, 10 m long, for drive of drive wheel X Xfor the operation of HAG-12.10 and control panel HSP-12HAG-12.10 hydraulic power pack; 15 kW/400 V; 30/44 l/min; 250 bar X XHSP-12 hydraulic control panel X X- - - set of hoses 2-parts, 10 m long, for feed at drilling and wire sawing X Xfor the operation of HAG-324 or HAG-12.20 with control panel for feedHAG-324 hydraulic power pack; 18,5 kW/400 V; 40/54 l/min; 250 bar XHAG-12.20 hydraulic power pack; 15 kW/400 V; 30/44 l/min; 250 bar X X- - - hydraulic control panel HAG-324 for feed control X X- - - set of hoses 2-parts, 10 m long, for feed at wire sawing with HAG-324 and HAG-12.20 X X7