zetor

HYDRAULIC EQUIPMENTEXTERNAL CONTROL OF REAR ARMS OF THE HYDRAULIC EQUIPMENTExternal control of rear arms of the hydraulic equipment can be found on the rearright mud guard and allows the driver easier hitching of the implement, as movementof the lower links of the 3-point hitch can be controlled from outside. It is used only forhitching and unhitching of agricultural implement.Fig. (A):Before use of the external control move the regulation lever (1) to the position P.Move the sliding stop of the inner hydraulic circuit lever (2) to the front extreme position.G419G161During manipulation with the 3-point hitch using the external controlthe worker shall stand outsidethe area of the hitched implementto prevent his catching and/or injure.Fig. (B): Lowering of arms of the hydraulic equipmentMove the lever (3) in direction of arrows (move of the lever is limited by the rockerarm). Repeating of this procedure lowers the hydraulic arms in small steps.Fig. (C): Lifting of arms of the hydraulic equipmentMove the lever (3) in direction of arrows (move of the lever is limited by the rockerarm). Repeating of this procedure lifts the hydraulic arms in small steps.20