zetor

More documents

Recommendations

Info

FORCESESSENTIAL TECHNICAL PARAMETERSType of tractor Z 6441 Z 7441 Z 8441Type of engine 7205 1105 1205Lifting force at end of lower links of the rear 3-point hitch,within full stroke, at max. usable pressure- with one auxiliary cylinder (kN)- With two auxiliary cylinders (kN)26.434.441.5Lifting force at end of lower links of the front 3-point hitch,within full stroke, at max. usable pressure (kN) 23POWER AND CONSUMPTIONType of tractor Z 6441 Z 7441 Z 8441Type of engine 7205 1105 1205Power on output shaft (kW±2%)- at nominal speed engine and shifted speed 1,000 rpm of theoutput shaftNew engine having 100 Mh max. 38.5 45.5 52Run-in engine (over 100 Mh 40.5 48 54.5Specific consumption of fuel (g.kW -1 .h -1 ±2%)- corresponding to the power above 260.7 251.5 279.136
SPEED OF THE FRONT OUTPUT SHAFT ZUIDBERGESSENTIAL TECHNICAL PARAMETERSDirection ofrotationSpeed of the output shaft / speed of engineSpeed of the output shaft / speed of engineright (a) 1,000 / 1,920 1,146 / 2,200∗left (b) 1,000 / 2,000 1,100 / 2,200∗ – optionalE80137
Page 3: ZETORThe supplement to the instruct
Page 8 and 9: PREVENTIVE DAILY MAINTENANCEG720OIL
Page 10 and 11: ACQUAINTANCE WITH THE TRACTORCONTRO
Page 12 and 13: ACQUAINTANCE WITH THE TRACTOR∗LEV
Page 14 and 15: TRANSPORT USED203AUTOMATIC GUIDE MO
Page 16 and 17: TRANSPORT USED207MODULE OF A BRACKE
Page 18 and 19: TRANSPORT USEMAXIMUM PERMISSIBLE VE
Page 20 and 21: HYDRAULIC EQUIPMENTEXTERNAL CONTROL
Page 22 and 23: HITCHESE459∗LOWER LINKS WITH TELE
Page 24 and 25: HITCHESE461HYDRAULIC LOCKING OF THE
Page 26 and 27: ELECTRIC INSTALLATIONF306FUSE DOSE
Page 28 and 29: PLANNED TECHNICAL MAINTENANCERECOMM
Page 30 and 31: PLANNED TECHNICAL MAINTENANCEOILS F
Page 32 and 33: MAINTENANCE INSTRUCTIONSINSTRUCTION
Page 34 and 35: ESSENTIAL TECHNICAL PARAMETERSTECHN
Page 38 and 39: AAcquaintance with the tractor 9Adj
Page 40: Supplement to the operation and mai

zetor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?