ViconNet Version 6 Data Sheet - Vicon

ViconNet 6SpecificationsWorkstation RequirementsHardware: 2.66 dual-core processor, 2 GB of RAM and 5GB of disk space. Workstations are availablefrom Vicon or may be COTS equipment.Operating System: Microsoft® Windows® XP Professional 32or 64-bit; Microsoft Vista 32-bit; MicrosoftWindows 7 Professional 32 or 64-bit;Windows 2003 or 2008 Server.Functions and FeaturesCompression:Transmission:Displays:Third Party CameraSupport:Main WindowScreen:H.264, ViconNet optimized MPEG-4 andJPEG (Normal and Full).Unicast and multicast.Supports 16 x 9 and 16 x 10 wide screen aswell as 4 x 3 standard viewing at a variety ofresolutions.List available at vicon-security.com/camsupport.A multi-channel display area containing upto 16 connected cameras and microphonesand all necessary controls to operate and setup the system.Graphical Map: Supports realistic camera location (aWorkstation with a dual output VGA willallow showing the map on a dedicatedmonitor while viewing video on the other).Site List:A physical list of all known networkSite areas and connected cameras andmicrophones.Play From Time: Call up images from any database on thenetwork from Main Screen.Navigator Window: A graphical display of recorded video. Itcontains a set of function buttons used toaccess the video on-screen.Network and SitesConfiguration:Macro Capabilities:DeviceConfiguration:AuthorizationRights Setup:Log Reporting:Allows administrator to set up all IP addressinformation and a system Nucleus andBackup Nucleus.Macros can be defined for recorded ordisplayed/played cameras, microphones andrelated devices (sensors).Devices can be configured for systemrecognition and operation.Group rights can be configured by specificsite and user. Rights provide authority toperform limited or all system functions.Continuously running activity log.Alarm Capabilities:Storage DatabaseUtilities:Authentication:Central FailureNotification (CFN):Events ManagementSystem (EVM):Museum Search:RecordingVerificationSystem:Archive Wizard andPlayer:Video Vault:Authorization Copyand Duplicate:Enhanced Logs:Camera Licensing:Alarms can be programmed to annunciateunder special conditions.Allows setup and usage of detected harddisks locally, including high-capacity iSCInetwork storage devices.ViconNet uses a 128-bit MD5 type videoauthentication algorithm to verify exportedvideo data integrity.Fault reporting system that providesapplication and hardware failure informationto all DVRs and NVRs connected to thesystem.Enables ViconNet to interface with anexternal system’s database, for example, anaccess control, point-of-purchase, intrusionmonitoring or license plate recognition (LPR)system.Enables an operator to define a regionwithin a specific Vicon camera’s field-ofview,for example, a door, for indexing. Thisaccelerates searching for a specific incident.Ensures continuous recording by notifyingusers of any recording errors, both locallyand over the network.Creates authenticated archives and savesto any location or removable media.. Thevideo clip is playable using the embeddedViconNet player.Allows any event that was tagged as analarm (VMD, video loss, dry contact or fromthe Events Management system) to be savedto a separate database, where it cannot beoverwritten by the system.Provides the ability to send authorizationsettings to other Workstations so they donot have to be programmed separately.Logs that are exported from ViconNet alsocontain Windows and setup logs, providingmore troubleshooting information whendiagnosing system problems.No fees for Vicon cameras. No complex IPcamera registration process.Data Sheet Number: V219Dated: 02/2011Vicon Data Sheet Part Number: 8009-7219-00-00Specifications subject to change without notice.Vicon, and ViconNet and their logos are registered trademarks of ViconIndustries Inc.Microsoft and Windows are registered trademarks of MicrosoftCorporation.Copyright © 2011 Vicon Industries Inc. All rights reserved.www.vicon-security.com