Current Catalog - John S. Hyatt & Associates, Inc.

JAMESENGINEERINGGP 12 x 1212" x 12" General Purpose truss is manufactured from 2" dia x 0.125" wall and 1" dia x 0.125"wall 6082T6 or 6061T6 Aluminium tubing. Bolts are supplied for assembly of truss elements. Thistruss is ideal for conference, exhibition, and small venue work. By incorporating suitable sleeveblocks and towers, this truss can be used with our Ground Support System.PRODUCTCODEB0700B0701B0702B0703B4700B4701B4702B4703B4704B4705B4705AB4706B4707B4708DESCRIPTION10' Section8' Section5' Section2' 6" Section3m Section2.5m Section2m Section1.5m Section1m Section2 Way Corner Block3 Way Corner Block4 Way Corner Block6 Way Corner BlockFlat Plate Hinge SectionWTlbs554635245546.540.53519.51517.519.526.514Allowable Load DataSpanfeet (meters)10 (3.048)20 (6.096)30 (9.144)40 (12.192)Maximum Allowable Uniform LoadsLoadspounds (kgs)6140 (2785)3100 (1406)1726 (783)855 (388)Maximum deflectioninches (mm)0.276 (7)1.10 (28)2.21 (56)2.96 (75)Maximum Allowable Center Point LoadsLoadsMaximum deflectionpounds (kgs) inches (mm)4497 (2040) 0.315 (8)1550 (703) 1.10 (28)864 (392) 2.21 (56)428 (194) 2.96 (75)LOADING FIGURES show maximum loads between supports in addition to the self weight of the truss. Information extracted fromthe structural report by Broadhurst, Goodwin, and Dunnsuit maximum shear capacity. All loads include 20% overload factor for dynamic effects.End View Side View 4 Way3 Way 2 WayLifting PointPlan View6 WayFlat Pivot SectionC2