Current Catalog - John S. Hyatt & Associates, Inc.

JAMESENGINEERINGSUPERLITETRUSSB1602 - 2 Way ConnectionThe 2 way joint is simply made byconnecting the inside truss spigots andinserting 2 double ended spigots to jointhe top and outer truss tubes together.All joints are pinned using 12mm Pinsand "R" clips.B1603 - 3 Way ConnectionThe 3 way joint is made by fitting a30.5 cm plate below the bottom tubes ofthe truss locating through the spigotholes. Join the lower ends of the trussestogether over the plate, adding the lowerdouble ended spigot to the open bottomand join together with M12 bolt sets.Then connect the ends of the top tubestogether using the "T" spigot, pinningwith 12mm pins and "R" clips.B1604 - 4 Way ConnectionThe 4 way joint is made by fitting a30.5 cm plate below the bottom tubesof the truss locating through the spigotholes. Join the lower ends of the trussestogether over the plate and fit M12 boltsets. The top tubes are joined with across spigot and pinned together with12mm pins and "R" clips.B1608 - Verticalconnecting spigotB1601 - Base PlateThe base plate is supplied with 3vertical connecting spigots. This platecan also be used on 3 and 4 wayjoints as a support and vertical trussplate.D1C