Water Pressure Systems

Water Pressure SystemsAll the convenience of your ‘at home’ water supply7. PAR-Max 1Water Pressure PumpEven our miniature model is a quiet, selfpriming,dry running, dual chamberdiaphragm pump, with thermal overloadprotection. Designed for use with 10mm ( 3 /8”)id hose and faucets, it serves up to 2 outlets,or 1 outlet if adapted to 13mm ( 1 /2”) id hose.▼ 42630-2900▼ 42631-290012 Volt dc, 35psi shut-off.12 Volt dc, manual on/off.Pre-pressurisedAccumulator TanksUnless you have a Variable Speed Drivepump an accumulator tank will improve anypressure switch controlled water system bysmoothing water flow and reducing on/offcycling of the pump. Jabsco accumulatortanks are maintenance free and can bemounted at any angle, thanks to theirinternal membrane.724153Sensor-Max VSD WaterPressure PumpsThese award winning pumps offer all thebenefits of Variable Speed Drive technology -they are exceptionally quiet running at typicaloutputs, as they automatically adjust theiroutput to match demand. An accumulatortank is totally unnecessary. We include aPumpgard pre-filter and a selection ofquick-connect fittings for ease of installation.1. Sensor-Max VSD 17Constant pressure flow rates up to 17 lpm(4.5 US gpm). Serves 4 or more outlets.▼ 31755-0200▼ 31755-000012/24 Volt dc, 30psi shut-off.12/24 Volt dc, 40psi shut-off.2. Sensor-Max VSD 14Constant pressure flow rates up to 14 lpm(3.5 US gpm). Serves 3 or more outlets.▼ 31750-0200▼ 31750-000012/24 Volt dc, 25psi shut-off.12/24 Volt dc, 35psi shut-off.PAR-Max 4 & 3Water Pressure PumpsThese two conventionally pressure switchcontrolled pumps enjoy the same pulsationfree four chamber diaphragm design andlong life motors as our Sensor-Max VSDmodels. Like all Jabsco water pressure pumpsthey are inherently quiet, self-priming andcan run dry without damage. Quick-connectfittings are included.3. PAR-Max 4Water Pressure PumpFlow rates up to 17 lpm (4.5 US gpm). Serves 4 ormore outlets.▼ 31620-0292▼ 31620-0294▼ 31620-0092▼ 31620-009412 Volt dc, 25psi shut-off.24 Volt dc, 25psi shut-off.12 Volt dc, 40psi shut-off.24 Volt dc, 40psi shut-off.4. PAR-Max 3Water Pressure PumpPhoto: Fairline Boats plcFlow rates up to 14 lpm (3.5 US gpm). Serves 3 ormore outlets.▼ 31600-0292▼ 31600-0294▼ 31600-0092▼ 31600-009412 Volt dc, 25psi shut-off.24 Volt dc, 25psi shut-off.12 Volt dc, 40psi shut-off.24 Volt dc, 40psi shut-off.PAR-Max 2.9 & 1.9Water Pressure PumpsThe new 2.9 & 1.9 models offer attractivelypriced solutions for craft with up to 3 hotand cold outlets, such as galley sink, handbasin and shower. The self-priming, dryrunning, three chamber diaphragm designhas a built-in bypass that gives smoothpulsation free flow, even at lower outputs,making an accumulator tank inessential. Thequiet running motor is protected by athermal overload cut-out, just like our moreexpensive models, and, of course, quickconnectfittings are included.5. PAR-Max 2.9Water Pressure PumpFlow rates up to 11 lpm (2.9 US gpm). Serves up to3 outlets.▼ 31395-0292▼ 31395-0294▼ 31395-0392▼ 31395-039412 Volt dc, 25psi shut-off.24 Volt dc, 25psi shut-off.12 Volt dc, 40psi shut-off.24 Volt dc, 40psi shut-off.6. PAR-Max 1.9Water Pressure PumpFlow rates up to 7 lpm (1.9 US gpm). Serves up to 2outlets.▼ 31295-0092▼ 31295-009412 Volt dc, 25psi shut-off.24 Volt dc, 25psi shut-off.36900, 36800, 36950Water Pressure PumpsThe original PAR diaphragm water pressurepumps. Highly reliable, belt driven pumpswith built-in pulsation dampeners andflexible mounts for noise and vibrationreduction. All three models can run dry.8. 36900Water Pressure PumpFlow rates up to 16 lpm (4.2 US gpm).▼ 36900-0200▼ 36900-021012 Volt dc, 20psi shut-off.24 Volt dc, 20psi shut-off.9. 36800Water Pressure PumpFlow rates up to 12.5 lpm (3.3 US gpm).▼ 36800-0200▼ 36800-021012 Volt dc, 20psi shut-off.24 Volt dc, 20psi shut-off.10. 36950Water Pressure PumpFlow rates up to 11.4 lpm (3.0 US gpm).▼ 36950-2200▼ 36950-221012 Volt dc, 20psi shut-off.24 Volt dc, 20psi shut-off.info11. Pre-pressurised 0.6 LitreAccumulator TankOur new mini accumulator tank fits into thosetight spaces!▼ 30573-00030.6 litre (21 fl.oz).12. Pre-pressurised 1 LitreAccumulator Tank13-19.20-21.Just the right size for use with PAR-Max 4 & 3pressure pumps.▼ 30573-0000Pumpgards1 litre (1 US quart).These compact pre-filters prevent particles jammingvalves and causing pump breakdowns. We’ve giventhem a screw off, transparent housing for easyinspection and quick, in place cleaning.▼ 46400-0014▼ 46400-0010▼ 46400-0012▼ 46400-0004▼ 46400-0000▼ 46400-0002▼ 46400-9500Aqua Filta90° model for 13mm ( 1 /2") femalethreads inlet, direct plug into JabscoWPS inlet port.90° model for 19mm ( 3 /4") hose inlet,direct plug into Jabsco WPS inlet port.90° model for 13mm ( 1 /2") hose inlet,direct plug into Jabsco WPS inlet portInline model for 13mm ( 1 /2") femalethreads.Inline model for 19mm ( 3 /4") id hose.Inline model for 13mm ( 1 /2") id hose.90° model for snap-in port and directplug into Jabsco WPS inlet port.Safe drinking water is not necessarily pleasant todrink. An activated carbon water filter lets you enjoyyour drinks without the need to carry bottled water.Aqua Filta’s 180º rotating ports allow for moreversatile installation, but most importantly we’vemade the annual replacement cheaper, easier andneater. Replacement is a simple job of changing acartridge, which is half the cost of a new unit!Internal valving means you don’t need to drain thesystem down for replacement either!▼ 59000-1000▼ 59100-0000Aqua Filta.Replacement Cartridge.914161881011121315171916W ARNINGDO NOT use any Jabsco pump for petrol,petroleum products or any products with aflash point below 37°C (98°F).A modern marine pressurised water system issimple, quiet, easy to maintain and provideshot or cold water at the turn of a tap. It's alsoversatile enough to provide full flow or atrickle according to need.Diaphragm pumps provide a quiet smoothflow of water with good pressure and aresuitable for boats up to 20m (65ft) - simplychoose a model suitable for the number ofoutlets on your boat.Most systems benefit from an accumulatortank to absorb pressure fluctuations andvibrations (which shorten pump life) and alsoto give better control of hot water systems.A new alternative to regular water pressuresystems is to fit a sensor controlled pumpwhere motor speed is electronically regulatedto maintain steady flow and constantpressure eliminating the need for standardpressure switch control or accumulator tank.20212

Self Priming Bilge PumpsManual Bilge Pumps5197114-6328101. 50880 Bilge PumpIntroducing our new generation single diaphragmpump, ideal for use in emptying the shallowest ofbilges. The filter-less design makes maintenanceeasy and is virtually unblockable! The pump has acompact design with multi positionable ports, whichmakes installation simple. 960 lph (254 US gph)output, self priming to 3m (10ft) and capable ofextensive dry running, offering an inexpensive,reliable solution for bilge pumping.▼ 50880-1000▼ 50880-110012 Volt dc.24 Volt dc.2. PAR-Max 4Continuous rated bilge pump with waterproofcoating for harsh environments. 978 lph(258 US gph) open flow output. Diaphragm designallows extended dry running. Build-in thermaloverload protection. Complete with Pumpgardstrainer.▼ 31705-0092▼ 31705-009412 Volt dc.24 Volt dc.3. Shower Drain/Bilge PumpOne of the best selling small bilge and shower sumppumps in the world. Fully corrosion resistant andquiet running. 780 lph (200 US gph) output andself priming to 2m (6ft). Supplied with Pumpgardstrainer.▼ 37202-2012▼ 37202-202412 Volt dc.24 Volt dc.4-6.PAR DiaphragmBilge PumpsThe original belt driven diaphragm pumps, selfpriming and dry running. Belt drives, rubbermounting and internal pulsation dampeners reducenoise and vibration. The 34600 gives 2450 lph(645 US gph), the 36600 1800 lph (475 US gph)and the 36680 1250 lph (330 US gph).All complete with Pumpgard strainer▼ 34600-0000▼ 34600-0010▼ 36600-0000▼ 36600-0010▼ 36680-2000▼ 36680-201012 Volt dc.24 Volt dc.12 Volt dc.24 Volt dc.12 Volt dc.24 Volt dc.7. Water PuppyThe workhorse of our range! Designed for bilgepumping, or general transfer duty. Self priming upto 1.2m (4ft), with an output of 1920 lph(500 US gph).▼ 23680-4003▼ 23680-4103▼ 18670-0123▼ 18670-024312 Volt dc.24 Volt dc.12 Volt dc, Not available in Europe.24 Volt dc, Not available in Europe.W ARNINGDO NOT use any Jabsco pump for petrol,petroleum products or any products witha flash point below 37°C (98°F).8. Maxi Puppy 3000A high pressure and high flow pump for bilgepumping and deckwash. Self priming up to 2.4m(8ft) with an output of 2640 lph (660 US gph). It’sbuilt to last with a bronze pump head and oilresistant nitrile impeller.▼ 23610-3003▼ 23610-310312 Volt dc.24 Volt dc.9. Utility Puppy 2000This pump gives the same performance in allaspects as the Water Puppy but its clever pumpdesign means it will run dry for up to 20 minuteswithout damage.▼ 23920-2403▼ 23920-2503▼ 23920-9403▼ 23920-950312 Volt dc, BSP.24 Volt dc, BSP.12 Volt dc, NPT.24 Volt dc, NPT.10. Utility Puppy 3000The heavy duty Puppy pump. Suitable forcommercial applications or prolonged hard use.Flow and performance are as per the Maxi Puppy,but the Utility Puppy 3000 boasts ten minutes dryrunning and an indestructible mechanical seal forlong life.▼ 23920-2213▼ 23920-2313▼ 23920-9213▼ 23920-931312 Volt dc, BSP.24 Volt dc, BSP.12 Volt dc, NPT.24 Volt dc, NPT.11. Clutch PumpsJabsco clutch pumps are used world-wide forfirefighting, bilge pumping, ballast transfer,emergency pumping and high capacity deckwash,so, if you’re travelling offshore, workingprofessionally or simply want the most enduringhigh output pump available read on!Engine driven; these pumps give flow rates of up to22,000 lph (5811US gph) at 2000 rpm. Easy toservice and maintain, bilge debris and oil present noproblems to these robust bronze bodied flexibleimpeller pumps. We manufacture clutch pumpswith 1", 1 1 /2" and 2" ports with manual orelectro-magnetic clutches.Proven time and again from Volvo and BOC Roundthe World Race Boats to deep sea trawlers. Pleaseconsult your Jabsco dealer to select the model mostsuited to your needs and engine installation.infoSelf Priming means a pump can draw fluidup to itself. Where we quote self primingdistances, they are the maximum verticaldistance a pump can self prime.Photo: Elan Marine12. Amazon WarriorIf you have a larger yacht or commercial craft thenthe Warrior is for you. Made from robust alloy withtwin diaphragms for added safety, the Warrior iscapable of an amazing 135 lpm (35 US gpm) andhas a big 45cm (18") handle for easy pumpingwhether mounted on or through deck.▼ 29280-0000▼ 29279-0000▼ 29289-0000Warrior 38mm (1 1 /2") hose.Optional Through Deck Kit.Under deck bracket (required forinstallation with 29279-0000).13. Amazon UniversalOur most versatile manual bilge pump which can bemounted on or through the bulkhead or deck.Designed for larger and medium sized boats with aflow rate of up to 100 lpm (25 US gpm) theUniversal is equally good at emptying holding tanksand has excellent solids handling ability.▼ 29270-0000▼ 29279-0000Universal 38mm (1 1 /2") hose.Optional through deck kit.14. Amazon ThrudeckThe Thrudeck is available with 25mm (1") or 38mm(1 1 /2") ports giving 50 lpm (13 US gpm) or 75 lpm(20 US gpm) output. The design allows unlimitedvariation of port direction and easy access to thewhole pump chamber and valves.▼ 29250-0000▼ 29250-001025mm (1") hose.38mm (1 1 /2") hose.infoOne essential component for any boat is aManual Bilge Pump mounted in a positionwhere it can be worked comfortably for longperiods of time. Yacht racing rules state that atleast one pump must be capable of beingpumped from the cockpit with all hatchesshut, and the best way to accomplish this iswith a through deck kit which allows the pumpto be installed safely below decks whilst theoperator pumps from above. A well designedmanual pump is very hard to block due to itslarge bore hose and valves and one piecediaphragm.There are a variety of electric powered pumpsavailable, each type has its own advantagesand it’s wise to know what a pump can andcan’t do to simplify selection of the correctmodel and size for your boat. Remember,electric pumps can be installed withan automatic bilge switch for unattendedoperation.Submersible Pumps are specifically designedto be fitted in the lowest part of the bilge.These electric Centrifugal Pumps are extremelyeconomical to buy and have huge flow rates.However, flow rates decrease more rapidlythan other pump types as the discharge headincreases, so do check our recommendedmaximum discharge heads and if in doubtalways go up a size.15. Amazon BulkheadThe smallest pump in our range designed specificallyfor smaller boats but still giving a powerful outputof 45 lpm (12 US gpm). Suitable for mounting onbulkhead or deck it has multi-positioned ports andbody which give an amazing 96 assembly variations.▼ 29240-000025mm (1") hose.16. Bilge StrainersStrainers prevent bilge debris from blocking pumpinlet hose and are fitted with a non-return valve tostop backflow of water into the bilge. Available for19mm, 25mm and 38mm ( 3 /4", 1" and 1 1 /2") hose.Outlet ports can be positioned from horizontal tovertical.▼ 29290-1020▼ 29290-1000▼ 29290-101019mm ( 3 /4") hose.25mm (1") hose.38mm (1 1 /2") hose.17. Non-return ValvesNon-return valves help priming and preventbackflow of water into the bilge. There are threesizes for 19mm, 25mm and 38mm ( 3 /4", 1" and 1 1 /2")hose.▼ 29295-1011▼ 29295-1000▼ 29295-101019mm ( 3 /4") hose.25mm (1") hose.38mm (1 1 /2") hose.There are 2 types of self priming electricalpumps available - Diaphragm and FlexibleImpeller. All self priming pumps canbe mounted well away from damp or wetareas where they can be kept dry andeasily maintained.Diaphragm Pumps can be run dry forextended periods and so be used to hoover upthe last drops of water - especially useful onmore modern hull types with shallower bilges.The rugged simplicity of Flexible ImpellerPumps means they can handle bilge debrisand are very easy to service, many yachtsmenare still using twenty five year old WaterPuppies! But remember Flexible Impellerpumps cannot be run dry or you will damagethe Impeller.Chosen by professional mariners the worldover Jabsco Clutch Pumps will last you alifetime. They’re not the cheapest to buy orinstall but they pump huge volumes, pass bilgedebris and double as firefighting or deckwashpumps. As with all Flexible Impeller pumpsthey’re easy to service but must not be run dry.Belt driven from your engine they are availablewith either manual or electromagnetic clutchfor remote control.1213151714166

513426Bilge Switches and Controls1. Bilge Pumpgard StrainersPre-filter protects all electric diaphragm bilgepumps. Prevents unnecessary pump breakdownscaused by particles in the water. Transparenthousing allows instant inspection. 46200-0000model installs in-line between bilge strainer andpump. Quick in-place cleaning of the 20 meshstainless steel filter screen.▼ 46200-0000▼ 46200-0010Model for 19mm ( 3 /4") id hose.Model for 19mm ( 3 /4") id hose,90 degree inlet & direct plug intoJabsco WPS inlet port.2. Jabsco Hydro Air SwitchSimply the most reliable automatic bilge switchavailable. Its unique design ensures no workingparts need be located in the bilge. Rising bilgewater pressurises air in the bell and tube and soactivates the diaphragm switch. Innovative design,modern styling, and corrosion proof materials makethe Hydro Air the choice of anyone seeking long lifeand total reliability.▼ 59400-0012▼ 59400-002412 Volt dc.24 Volt dc.3. Jabsco BilgemasterDesigned to control any pump (12 or 24V up to 30amps) operated via an automatic switch. 3 wayswitch with automatic “off” or “on” positions.An amber light shows when automatic is selectedand a red light shows when the pump is operating.It's even water resistant and so can be mounted inexposed positions.▼ 29140-0000Switch 12/24 Volt dc.4. Vacuum Switch(Not available in N. America)Especially useful to protect your Flexible Impellerpumps from damage through extended periods ofdry running. The Vacuum Switch mounts directly tosome Jabsco pumps and cuts power to the motorwhen there is no fluid in the inlet pipework.Suitable for both 12 and 24 Volt pumps.▼ 4732-0000 Vacuum Switch.Rule Float SwitchesIn line with regional legislationrequirements, the mercury hasbeen removed from our ever popular floatswitch range. Now mercury-free a number ofimprovements have also been made givingthe high level of water protection found inRule’s submersible pumps with long life seals,top mounted waterproof grommet protectionand ‘blocked’ wiring, all of which preventcorrosion and water wicking. The Rule-A-Matic and SuperSwitch now have adetachable mounting base to make themeasier to install and remove for cleaning andinspection. They also have larger floatchambers for increased buoyancy.5. Rule-A-Matic ®Float SwitchYear after year, the Rule-A-Matic ® is the switch ofchoice of most selective yachtsmen, commercialfishermen, and boat builders the world over, whichhas made the Rule-A-Matic ® the best selling floatswitch in the world. For use with pumps drawing upto 14 amps.▼ 35A Rule-A-Matic ® Float Switch.6. Rule-A-Matic Plus ®Float SwitchCompact, sleek and rugged, the Rule-A-Matic Plus ®Float Switch has a strong, fully integrated, impactresistant cover, which protects against debris andjamming. Highly abrasion resistant wires exit the topkeeping them out of the water and keeping wearand tear to a minimum. The simple manual testfeature allows you to check for obstructions. For usewith pumps drawing up to 20 amps.▼ 40A Rule-A-Matic Plus ® Float Switch.7. Rule SuperSwitchFloat SwitchDesigned for the toughest applications withnon-corroding construction and ultrasonicallywelded assembly for hermetic seal. Complete with amanual test feature for that extra peace-of-mindand backed by a 5 year warranty, the RuleSuperSwitch will be ready to work when you need itmost! For use with pumps drawing up to 20 amps.▼ 37A SuperSwitch Float Switch 12/24/32 Volt.Photo: Fairline Boats plc1. iL200 SeriesPumps fresh and sea water with a flow rate of 760lph (200 US gph). The Kit comes complete withfood grade hose so is ideal for use in a simpledrinking water system.▼ iL20012 Volt dc, Pump.▼ iL200K 12 Volt dc, Pump Kit complete with hose, nozzleand battery clips.2. iL200 Plus SeriesSubmersible & Inline Pumps& KitsMulti-ApplicationThe Slimline Series is a whole family of compact combinedSubmersible and Inline pumps and Portable Pump Kits designed for awide variety of uses, both on board and ashore. They can be used topump bilge water from tight spaces, deck showers, for general washdown or water and diesel transfer.There are four sizes in the Slimline Series and are capable of pumping hot orcold fresh water, seawater and with some models - even diesel. The PortablePump Kits come complete with lay flat hose, spray nozzle and battery terminalclips and are ready to use!4. iL500 Plus SeriesPumps fresh and sea water and diesel with a flowrate of 1920 lph (500 US gph). Available in pumpand kit form. Providing pressures of 14psi (0.96 bar)you can drop the pump straight into the sea and itis perfect for washdown and deck cleaning.▼ iL500P 12 Volt dc,Pump complete with battery clips.▼ iL500P-24 24 Volt dc,Pump complete with battery clips.▼ iL500PK 12 Volt dc,Pump Kit complete with hose, nozzle andbattery clips.▼ iL500PK-24 24 Volt dc,Pump Kit complete with hose, nozzle andbattery clips.2138. Rule 3-WayRocker Panel SwitchPumps fresh and sea water and is also suitable fordiesel with a flow rate of 760 lph (200 US gph).Compact, continuous duty pump suitable for manyapplications.4778Photo: Hallberg Rassey, 342, Peter SzarerControls any pump equipped with an automaticfloat switch. This unit features a black plastic panel,has a built-in fuse holder and an internally lit rockerswitch with 3 positions (automatic, off, or manual)with the Rule “fail-safe” spring return to “off” fromthe “manual” position.▼ 43▼ 4412 Volt dc.24/32 Volt dc.▼ iL200P▼ iL200P-2412 Volt dc, Pump.24 Volt dc, Pump.3. iL280 Plus SeriesPumps fresh and sea water and diesel with a flowrate of 1080 lph (280 US gph). Available in pumpand kit form, the pump comes complete with 4metres (13ft) of cable and battery clips. The pumpkit is provided with lay flat PVC hose for compactstorage.▼ iL280P 12 Volt dc,Pump complete with battery clips.▼ iL280P-24 24 Volt dc,Pump complete with battery clips.▼ iL280PK 12 Volt dc,Pump Kit complete with hose, nozzle andbattery clips.▼ iL280PK-24 24 Volt dc, Pump Kit complete with hose,nozzle and battery clips.8

Livewell Pumps & SystemsFor the serious fishermanToilet & Waste Systems1. 401CRule’s unsurpassed quality and leadership in bilge pump design and technologyincludes a complete range of Livewell/Aerator pumps, accessories and kits.Designed to supply the volume of water required to keep bait and catch aliveand healthy, all pumps feature Rule's incredibly long life motors for outstandingreliability, performance, and durability. They are silent running and vibrationlessand are a must on any serious fisherman's boat. All pumps feature advancedanti-airlock protection.Photo: Fairline Boats plc42. 403STC3. 405FCTournament SeriesThe new innovative designincludes many new and excitingfeatures including a quick, onehand "push button" motorcartridge removal system, patented rotatablebase that allows you to position the dischargenozzle at any location, threaded nylon hose barbattachments which allows for various hosemounting options and built-in dual port option.1. Tournament-Series 500Livewell PumpOur reliable, efficient 1925 lph (500 US gph)output baitwell/livewell pump will handle tanks upto 95 Litres (24.5 US Gallons). 19mm ( 3 /4")discharge outlet.▼ 401C Thru-Hull Applications 100mm (4")Angled Pickup Tube.▼ 401STC Thru-Hull Applications 121mm (4 3 /4")Straight Pickup Tube.▼ 401FC Seacock Application 25mm (1")(tapered thread) Pickup Tube.2. Tournament-Series 800Livewell PumpOur best selling 3028 lph (800 US gph) outputlivewell/baitwell pumps are designed for anyserious fisherman’s boat. Designed for tanks up to132 Litres (34 US Gallons), these high capacitypumps will keep the bait and fish alive andhealthy. 19mm ( 3 /4") discharge outlet▼ 403C Thru-Hull Applications 100mm (4")Angled Pickup tube.▼ 403STC Thru-Hull Applications 121mm (4 3 /4")Straight Pickup tube.▼ 403FC Seacock Application 25mm (1")(tapered thread) Pickup tube.4. Replacement MotorModulesThe innovative line of cartridge pumps featureremovable motor cartridges for fast andconvenient replacement - even underway.▼ 45DR▼ 46DR▼ 47DR500 Replacement Motor Cartridge.800 Replacement Motor Cartridge.1100 Replacement Motor Cartridge.5. Gentle-FlowOxygenator KitDesigned with the patented infusor technologyand a Gentle-Flow directional discharge, the RuleGentle-Flow Oxygenator introduces air into thebase of the livewell pump through the air controlcenter producing millions of micro-fine bubbles.Because the bubbles are so small, they remainsuspended in the water longer providing moreaeration to your delicate bait and catch. Kits comecomplete with a directional discharge, intakestrainer, hose and intake valve.▼ 255▼ 256360º rotatable inlet700 Pump - up to 11kg (25 lbs) of bait.1100 Pump - up to 22kg (50 lbs) of bait.360ºrotatableoutletAt Jabsco we are the world’s largest manufacturers and suppliers of small craftmarine toilets - so we’ve built a fair degree of experience in heads systems andtheir design and installation.We at Jabsco all understand the importance of keeping the environment clean and free from waste. However it isunfortunate that there is no internationally accepted legislation to guide us on how to deal with the waste from ourtoilet systems. For this reason Jabsco have produced this guide which details the four most common ways of dealingwith toilet waste. It is important to note that your choice of system may be governed by your own national and localrules and regulations.Option 1 Option 2Discharge waste directly into a non-restricted area of water usingthe toilet’s own pump and an anti-syphon loop.Option 3 Option 4Collect waste in an on-board holding tank so that it can bedischarged later when you are in un-restricted waters using anelectric or manual pump.Manual ToiletElectric Toilet53. Tournament-Series 1100Livewell PumpOur highest capacity 4250 lph (1100 US gph)output Tournament Series baitwell/livewell pump isdesigned for tanks up to 170 Litres(44 US Gallons). Ideal for tournament fishing thatrequires high water flow for keeping bait andcatch alive and healthy. 29mm (1 1 /8"") dischargeoutlet.infoAlways select a pump that will deliver enoughwater to replace livewell water every 10minutes. Bigger is not better - too much pumpcapacity could lead to air locks. Mount thepump as low and close to the hull as possible.Collect waste in an on-board holding tank for discharge later toa Shore Station using a dockside suction pump or portableutility pump.A combination of Option 2 and 3 to give you the flexibility ofdischarging waste wherever most convenient and without risk tothe environment.▼ 405C Thru-Hull Applications 100mm (4")Angled Pickup tube.▼ 405STC Thru-Hull Applications 121mm (4 3 /4")Straight Pickup tube.▼ 405FC Seacock Application 25mm (1")(tapered thread) Pickup tube.29015 Vented Loop 38110 Waste Management System53080 Utility PumpDeluxe FlushElectric Toilet918590 Macerator50890 Waste Pump 45490 Y Valve10Photo: Cruiser yachts: www.cruiseryachts.com

112463175Toilet & Waste SystemsDeluxe Flush Electric ToiletsThe Deluxe Flush Range is Jabsco’s latestoffering to the top of the range Electric ToiletMarket. All aspects of the design have beenoptimized for minimal water usage and nearsilent operation.The stylish and extremely compact design iscarefully contoured to conceal the flushpump, wiring and plumbing, whilst stillfeaturing a full-size household seat.The two models differ only in the shape ofthe back of the toilet. The Angled Backversion gives minimal footprint and makes iteasy to mount against a sloping surface or ina corner. The Vertical Back version allowssnug fitting against a vertical bulkhead.Deluxe Flush toilets feature a multifunction‘one touch’ control pad offering 4 rinse andflush options, using as little as 1 litre(1 US Quart) of water.1. Deluxe Flush Toilets -Angled Back▼ 58020-1012▼ 58020-1024▼ 58220-1012▼ 58220-1024Angled back bowl with solenoid valve12 volt dc, fuse 25 amp.Angled back bowl with solenoid valve24 volt dc, fuse 15 amp.Angled back bowl with intake pump12 volt dc, fuse 25 amp.Angled back bowl with intake pump24 volt dc, fuse 15 amp.2. Deluxe Flush Toilets -Vertical Back▼ 58040-1012▼ 58040-1024▼ 58240-1012▼ 58240-1024Vertical back bowl with solenoid valve12 volt dc, fuse 25 amp.Vertical back bowl with solenoid valve24 volt dc, fuse 15 amp.Vertical back bowl with intake pump12 volt dc, fuse 25 amp.Vertical back bowl with intake pump24 volt dc, fuse 15 amp.DS14 Designer StyleElectric ToiletsOur Designer Style Toilets combine all thesophistication of our Quiet Flush Toilets witha modern vitreous china exterior that fitsneatly against a vertical bulkhead andconceals all wiring and plumbing, so that youcan enjoy the same style afloat as ashore.The same three way control system used inQuiet Flush Toilets enables the water level tobe raised, lowered, flushed and dischargedaccording to need. As with Quiet Flush, youhave a choice of flushing with raw water orfresh water.3. DS14 Designer StyleElectric Toilet▼ 37075-0092▼ 37075-0094▼ 37275-0092▼ 37275-0094Compact 14" height with solenoidvalve 12 Volt dc.Compact 14" height with solenoidvalve 24 Volt dc.Compact 14" height with in-takepump 12 Volt dc.Compact 14" height with in-takepump 24 Volt dc.Quiet Flush Electric ToiletsWe’ve used our long experience of electrictoilets to dramatically reduce noise levelswhen the toilet is flushed. What’s more, anew three-way switch allows operation ofeither the flush, or discharge pump, or bothtogether, allowing water level to be adjustedfor user comfort!We supply Quiet Flush Toilets in eitherRegular or Compact bowl sizes, and in twomodels - either with their own intake pumpfor external water flushing, or with a specialsolenoid valve & syphon breaker to preventcontamination for those who prefer toconnect to their drinking water pressurepump.4. Quiet Flush Electric Toiletswith Solenoid Valve▼ 37045-0092▼ 37045-0094▼ 37045-1092▼ 37045-1094Compact bowl with solenoid valve12 Volt dc.Compact bowl with solenoid valve24 Volt dc.Regular bowl with solenoid valve12 Volt dc.Regular bowl with solenoid valve24 Volt dc.5. Quiet Flush Electric Toiletswith In-Take Pump▼ 37245-0092▼ 37245-0094▼ 37245-1092▼ 37245-1094Compact bowl with in-take pump12 Volt dc.Compact bowl with in-take pump24 Volt dc.Regular bowl with in-take pump12 Volt dc.Regular bowl with in-take pump24 Volt dc.6-7.Quiet Flush Conversion KitIf you already have our traditional 37010 ElectricToilet, our Quiet Flush Conversion Kit will give youall the benefits of our latest models - quietoperation, three-way switch for adjustable waterlevel, plus the choice between fresh or raw waterflushing.▼ 37055-0092▼ 37055-0094▼ 37255-0092▼ 37255-0094Conversion kit with solenoid valve12 Volt dc.Conversion kit with solenoid valve24 Volt dc.Conversion kit with in-take pump12 Volt dc.Conversion kit with in-take pump24 Volt dc.Photo: Fairline Boats plc8. Economy Electric Compact& Regular ToiletsOur traditional style Electric Toilet. Self priming upto 1.2m (4ft) and can discharge through amaximum vertical head of 1.2m (4ft). Comescomplete with a moulded splashguard and a simpleswitch. Available in Compact or Regular bowl sizes.▼ 37010-0090▼ 37010-0096▼ 37010-1090▼ 37010-1096Compact bowl 12 Volt dc.Compact bowl 24 Volt dc.Regular bowl 12 Volt dc.Regular bowl 24 Volt dc.9. Conversion Kit -Manual to ElectricSimple to install - Our Conversions replace the pumpon your existing manual toilet using your currenthose. Child’s play to use - a spring return knob hastwo positions, one for bowl emptying and the otherfor bowl emptying and flushing. Supplied asstandard to fit our Manual Toilets.▼ 29200-0120▼ 29200-024012 Volt dc.24 Volt dc.Compact & RegularManual ToiletsThe World’s No. 1 Marine Toilet is now betterthan ever!Twist 'n' Lock● Twist ‘n’ lock action safety handle guards againstflooding and waste backflow by locking thewaste outlet valve shut.● Reversible pump mounting allows re-assembly forleft hand operation by installer.● Powerful self-priming, double-acting pistonpump.infoAt Jabsco we are the world’s largestmanufacturers and suppliers of smallcraft Marine Toilets - so we’ve built afair degree of experience in wastesystems and their design andinstallation.With modern design and materials,Manual Toilets are easy to service,clean to use, and offer extremely goodvalue for money. Remember there aretwo bowl sizes available and it’s wellworth checking how much space isavailable in your heads compartmentfor the comfort of a full sized bowl.Manual toilets can be upgraded toelectric operation by the use of ourConversion. This has been designed tobolt directly in place of the manualpump and use the same pipeworkalready installed. A normal crew of fourcan expect to use less than oneamp/hour per day through electrictoilet use.37010-Series Electric Toilets have themotor sited at the rear of a narrow base,which gives a clean appearance fromthe front, and its push button controlmakes life simpler for newcomers andexperienced crews alike.● Strong swirl action for efficient flushing.● Crevice free contours and skirted base for addedcleanliness and hygiene.● Contoured handle and conveniently positionedflush control lever for ease of use.● Angled pump housing and long stroke for easierpumping.● Spring assisted top valve closure for easierpriming.● Automatic vacuum breaker operated by flushcontrol lever for easier bowl emptying.● Constant 38mm (1 1 /2") bore waste path minimisesblockages.● Aortic joker valve combines full 38mm (1 1 /2")bore with automatic backflow prevention.● Multi-angle discharge elbow for ease ofinstallation.● Accessible mounting points for faster installation.● All fastenings face front or top for superblysimple servicing without need for special tools.● Renewable external seal housing for quick, cleanreplacement of seal and piston rod guide.● Positively located gaskets ensure correct reassembly.● Dual function base plug combines winter drainpoint with easy cleaning access.10. Twist 'n' Lock CompactManual Toilet▼ 29090-3000Compact Bowl.11. Twist 'n' Lock RegularManual Toilet▼ 29120-3000Regular Bowl.Our Quiet Flush Toilets offer a newdimension in sophistication - waterlevel can be adjusted to suit yourneeds via a three way switch and byusing a remote mounted pump andquiet diaphragm pump we havedrastically reduced noise levels.Our Deluxe Flush Toilets offer ‘stateof-the-art’performance and control,all in a compact, stylish, vitreous chinaexterior. Near silent operation, minimalwater usage and full size seat are justthree of the many key benefits offeredas standard.Whichever toilet you choose you needto make sure your installation is fullyin-line with local regulationsconcerning discharge. Many areas willheavily fine anyone caught dischargingoverboard. This means you need toinstall a Holding Tank to empty intountil you can discharge into a docksidepump out station or directly overboardfurther out to sea. Diaphragm andMacerator Waste Pumps aredesigned to empty your holding tanks.Choose a model suited to your tanksize, or use a Manual Pump suitablefor the purpose such as the AmazonUniversal.1098111112

361542Pumps and Accessories1. Waste ManagementSystemJabsco’s NEW Type 3 Waste Management Systemprovides an easy-to-install, all-inclusive solutionconsisting of a compact polyethylene holding tankand an integral Run-Dry Macerator Pump. Thesystem has a touch-pad control panel to monitorwaste levels and when required the user canactivate the macerator pump to evacuate waste.▼ 38110-0092▼ 38110-009412 Volt dc pump, fuse 16 amp.24 Volt dc pump, fuse 8 amp.2. Diaphragm Waste PumpThe ‘straight through’ waste path of this superquiet pump easily passes solids in suspension,making it the ideal solution for emptying holdingtanks.The 360º rotating head offers multiple installationoptions. 19 lpm (5 US gpm) output and selfpriming up to 10ft (3m). Capable of extensive dryrunning. Compact and simple design.▼ 50890-1000▼ 50890-110012 Volt dc model, fuse 15 amp.24 Volt dc model, fuse 7 amp.3. Sealed MaceratorWaste PumpNew O-ring sealed motor, twin sealed ball bearingsand heavy duty chopper make this macerator pumpideal for evacuating fish boxes and livewell tanks aswell as holding tanks. The macerator grinds wasteinto small particles so it easily passes through the25mm (1”) discharge port. Can discharge tanks upto 600 litres (160 US gallons) in one operation andself primes up to 1.2m (4ft). In addition to thesefeatures the Jabsco Macerator is now fitted with anexclusive (patent pending) Run-Dry ProtectionDevice. This new feature makes accidental run-dryimpeller damage a thing of the past.▼ 18590-2092▼ 18590-209412 Volt dc.24 Volt dc.4. Utility PumpsThese heavy duty AC pumps are suitable fordockside pump out or general duty applications,with all the benefits of a flexible impeller pump.▼ 53080-2063▼ 6050-0003220 Volt(50Hz)20 minute dry running ability.115 Volt (60Hz)Open, drip proof motor.5. Solenoid Valve for 37010Electric ToiletsThe Solenoid Valve is essential for 37010 ElectricToilets fitted with a vented loop on the inletpipework which can restrict priming and flow.The solenoid valve is controlled by the toiletoperation switch, providing full performance.▼ 37068-2000 Solenoid valve for 37010 electric toilets.For use with: 29015-0000 19mm ( 3 /4")Vented Loop.6. Vented LoopsVented loops guard against the danger of watersyphoning over pipework loops in below thewaterline installations of toilets and bilge pumps.▼ 29015-0000▼ 29015-0020▼ 29015-00107. Y-Valve19mm ( 3 /4") model.25mm (1") model.38mm (1 1 /2") model.This robust Y-Valve allows waste to be pumpeddirectly overboard or into a holding tank. Rotatingdischarge ports simplifies installation. Both 25mm(1") and 38mm (1 1 /2") inlet ports are included.Can be operated through a bulkhead using optionalshaft extension and can be padlocked so that wastecan only go to the holding tank to comply withsome local regulations.▼ 45490-1000▼ 45500-1000Y-Valve.Extension for through-bulkheadoperation.8. Toilet PumpgardThe Pumpgard inlet strainer protects manual orelectric toilets from pump malfunctions caused bydebris. Connections for 19mm ( 3 /4") hose.Quick in-place cleaning.▼ 46200-0000Toilet Pumpgard.9. Inlet Non-return ValveA check valve gives quicker and easier flushingresponse on many manual and 37010-Series electrictoilet installations. Simple fit in inlet suction hose,close to seacock.▼ 29295-101119mm ( 3 /4") Inlet Non-Return Valve.Photo: Fairline Boats plc1. 50880 Shower &Sink Drain PumpSink & Shower Drain PumpsMaking life afloat simplerIntroducing our new generation single diaphragmpump, ideal for use in shower and sink drainapplications. The filter-less design makesmaintenance easy and is virtually unblockable! Thepump has a compact design with multi positionableports, which make installation simple. 960 lph(254 US gph) output, self priming to 3m (10ft) andcapable of extensive dry running, offering aninexpensive, reliable solution for shower and sinkwaste water.▼ 50880-1000▼ 50880-110012 Volt dc.24 Volt dc.2. PAR-Max 3Shower Drain PumpNew generation, long life fully serviceable showerdrain pump offering 792 lph (210 US gph) outputat 1m (3ft) head. Self priming up to 3m (10ft)allowing the pump to be mounted above wetbilges. Super quiet diaphragm design allowsextended dry running whilst the continuous rated,heavy duty motor with waterproof coating makes itsuitable for the harshest bilge environments.Highly reliable with thermal overload protectionbuilt in to avoid overheating. Supplied withPumpgard filter.▼ 31610-0092▼ 31610-009412 Volt dc.24 Volt dc.3. Jabsco Shower andBilge PumpThe best selling shower sump pump in the world!Quiet running and fully corrosion resistant.Compact, dry running diaphragm pump, selfpriming up to 2m (6ft) and offering 780 lph (204US gph) output at 1m (3ft) head. Supplied withpumpgard filter.▼ 37202-2012▼ 37202-202412 Volt dc.24 Volt dc.4. Water Puppy ShowerDrain PumpShower debris presents no problem to this bronzebodied, flexible impeller design. Self priming up to1.2m (4ft) allows mounting above wet bilges andoffers 1920 lph (500 US gph) output at 3m (10ft)head. The simple design means fewer wearing parts- all user serviceable.▼ 23680-4003▼ 23680-410312 Volt dc.24 Volt dc.5. Rule Multi-PortShower Drain SystemA compact, full capacity shower drain system.Automatically turns on after the water starts, andshuts off when the water is removed. Activated by aRule-A-Matic Plus ® float switch. Available with threeinlet ports which offers varying combinations ofinlet hose and 3100 lph (800 US gph) capacity atzero discharge head. Other features include a clearscrew down cover, a removable strainer for easycleaning, and an internal check valve to preventback flow.▼ 98AMulti-Port Inlet 12 Volt dc.▼ 98A-24 Multi-Port Inlet 24 Volt dc.13427info1389Photo: Cruiser yachts: www.cruiseryachts.comWe offer three different types of sink andshower drain pumps: self primingdiaphragm pumps and a centrifugalsump/pump unit and Flexible Impellerpumps.Diaphragm pumps like our new 50880 andJabsco 3 can be remote mounted for easyaccess as they are self priming, can run dryto drain away the last drops of water andare very quiet in operation.Our sump/pump unit is designed to allowup to three showers to drain into onecommon sump, which is then self emptyingdue to its internal pump and float switch.They are a compact and low cost method ofemptying multiple showers.Flexible Impeller pumps simple yet robustdesign and powerful flow rate makes it idealfor pumping shower waste from multiplesystems. Does not require an inlet strainer.514

General Purpose PumpsA pump for every purposeDiesel Fuel Transfer & Oil Change Pumps1. Gear PuppyA simple and reliable gear pump designed for oiland diesel transfer in medium duty applications.Supplied complete with inlet filter it can provide24.5 lpm (6.5 US gpm) at 5m (16.4 ft) head.8. Handy Boy Utility PumpA brass bodied hand pump supplied with a range ofhoses and connectors (including dipstick probes) fordifferent installations, giving up to 7 lpm(1.8 US gpm) output.11315452Deckwash Pumps & InflatorsPAR-MaxWashdown Pumps & KitsJabsco offers boaters a full line of pumps atideal flow and pressure for washdown.The new PAR-Max Ultra 7.0 Washdown modeloffers up to 5.5 Bar (80 PSI) and up to26.5 lpm (7 US gpm). Washdown pumps areideal for cleaning decks, cockpits and anchorson yachts of a range of sizes and can beconnected to sea or fresh water. These unitscome with an intake strainer, spray nozzle,and quick connect 3 /4" Hose Barb fittings.1. PAR-Max Ultra 7.0Washdown Set2&3.Ultra Power - 26.5 lpm (7.0 US gpm) flow rate!▼ 52700-0392▼ 52700-039412 volt dc, 35 amp breaker included.24 volt dc, fuse 20 amp.PAR-Max 4.0 WashdownPump KitPowerful 15 lpm (4.0 gpm) flow rate, offerspressures up to 4.1 bar (60 psi).▼ 32605-0392▼ 32605-0394▼ 32900-0092▼ 32900-009412 volt dc, fuse 15 amp.24 volt dc, fuse 10 amp.12 volt dc, with 7.6m (25ft) hosecoil.24 volt dc, with 7.6m (25ft) hosecoil.4. PAR-Max 4 Washdown SetFlow rate up to 19 lpm (5 US gpm), offers pressuresup to 35 bar (50 psi).▼ 32700-0392▼ 32700-039412 Volt dc, fuse 15 amp.24 Volt dc, fuse 7 amp.7 6. Flush Mount HoseCoil 6. Horizontal Mount HoseCoil 6. Side Mount HoseCoilinfoWashdown Pumps provide a supply of water athigh pressure to blast mud, silt and dirt awayfrom anchors, chains and decks. Anyone who’stried cleaning a filthy anchor chain with a bucketand brush as it’s hauled on deck will appreciatethe benefit of a jet to do the job for you!Photo: Steve Bly and Comstock Images/Alamy5. Flush Mount StainlessSteel Deck ConnectorThis attractive fitting features an automatic watershut-off operated by the supplied ‘twist and lock’hose adaptor. Several deck connectors can besupplied from just one deckwash pump.▼ 31911-0000▼ 31911-0007Deck Fitting, 1 /2" NPT female inlet,with one 3 /4" GHT male hose adaptor.Deck Fitting, 1 /2" BSP female inlet,with one 3 /4" BSP male hose adaptor.6. HoseCoil CockpitWashdown SystemsThe perfect solution for installing a washdown hoseon your boat in an out-of-the-way location. Theseclever designs allow you to mount the enclosureinto the bulkhead, cockpit or deck. Complete withall fittings, fasteners and spray nozzle these simpleand convenient solutions mean you will never tripon a hose again!▼ 31910-1115▼ 31910-2115▼ 31910-31157. High SpeedInflator / DeflatorFlush Mount Enclosure, complete with4.5m (15ft) hose.Horizontal Mount Enclosure, completewith 8m (25ft) hose.Side Mount Enclosure, complete with4.5m (15ft) hose.This new super-fast air pump cuts inflation time fora typical four man dinghy to less than 2 minutes –far quicker than using a foot pump! The unit issupplied with a whole range of adjustable nozzlesto fit plastic, rubber and sprung valves, on all majorbrands from Avon to Zodiac. Lightweight, compactyet with a rugged construction, our new RuleInflator/Deflator is simple to use and is poweredfrom a standard 12 volt boat or car battery.▼ iD20▼ iD20K12 Volt dc, Inflator / Deflator.Replacement Nozzle Kit.Washdown sets should be controlled from ondeck where the work is being done, so we supplyboth our pump types with trigger nozzles andpressure switches to shut down the pump themoment it’s not required.▼ 23230-2012▼ 23230-202412 Volt dc.24 Volt dc.2. Junior Gear PuppyA small and reliable gear pump designed for oil anddiesel transfer in medium duty applications.Supplied complete with inlet filter it can provide13.5 lpm (3.5 US gpm) at 5m (16.4 ft) head.▼ 23220-2012▼ 23220-20243. Fuelmaster12 Volt dc.24 Volt dc.This ‘all-inclusive’ diesel pumping system is ideal fordockside and boatyard refuelling. With triggernozzle, hose, strainer and mountable carry caseincluded as standard.▼ 50140-0000▼ 50140-010012 Volt dc.24 Volt dc.4. 35 lpm Sliding Vane PumpSuitable for medium duty, this pump is rated for45 minutes continuous operation and self primesup to 2m (6ft) giving flow rates of 35 lpm(9.3 US gpm). Connections for 19mm ( 3 /4”) id hose.▼ 23870-1200▼ 23870-130012 Volt dc.24 Volt dc.5. 52 lpm Sliding Vane PumpThis model is rated for continuous use and gives52 lpm (13.7 US gpm), self priming up to 3m(10ft). Connections for 25mm (1”) id hose.▼ VR050-1022▼ VR050-112212 Volt dc.24 Volt dc.6. 105 lpmSliding Vane PumpA continuously rated heavy duty diesel refuellingpump which is self priming up to 5m (16ft).Connections for 32mm (1 1 /4") ID hose with switchand circuit breaker fitted as standard.▼ VR100-112224 Volt dc.7. Little Pal Utility PumpA compact brass hand pump for engine andgearbox oil drain, giving up to 5 lpm (1.3 US gpm)output and supplied with a 13mm ( 1 /2") outlet hoseand 6mm ( 1 /4") dipstick probe for the inlet.▼ 34060-0010Little Pal.W ARNINGDO NOT use any Jabsco pump for petrol,petroleum products or any products with aflash point below 37°C (98°F).infoWe designed our range of Sliding Vane Pumps togive trouble free diesel pumping. They are selfpriming and so can be mounted in a suitablelocation away from the tank for ease ofmaintenance. Their rugged reliability has beenproven in the tough environment of off-roadearth moving machinery where they are standardfitment world wide.▼ 33799-00009. Mini PuppyHandy Boy.Designed for permanent, on board installation theMini Puppy will empty oil sumps into a suitablecontainer. 6 lpm (1.6 US gpm) output, self primingup to 1.5m (5ft), and simple to service.▼ 23620-4003▼ 23620-410312 Volt dc.24 Volt dc.10. Porta-QuickThe ultimate answer to hassle free oil change, thisrobust reversible pump is mounted on a 13 litre(3.4 US gallon) container and supplied with cables,battery clips and hoses ready for use. Operating thepump one way empties the oil into the containerand when you’re ashore simply operating the pumpswitch the other way empties the container into asuitable receptacle. Self priming up to 1.2m (4ft).▼ 17800-2000▼ 17800-202412 Volt dc.24 Volt dc.11. Flat Tank Oil ChangerThe Jabsco Flat Tank Oil Change System will extractup to 50 weight oil, at a temperature of 70°F (21°C)through the engine’s dip stick tube in less than 5minutes. The new 13 litre (14 quart) flat tank designmakes for a clean and simple oil change on anyboat and allows trouble-free disposal due to thestable, easy to carry design.▼ 17860-001212 Volt dc, fuse 5 amp.12. Oil Change PumpThe Oil Change Pump is the same high qualitypump used in the Jabsco multi-engine Oil ChangeSystem. The powerful pump can change oil in atypical V-8 engine in just minutes.▼ 17830-0012▼ 17830-002412 Volt dc.24 Volt dc.13. Oil Changer SystemThe Oil Change System consists of a robust selfprimingflexible impeller pump mounted to an easyto install base and coupled to a five port manifold,factory fitted with three full flow ball valves. All areenclosed by a white plastic cover to dress-up thecleanest of engine rooms.▼ 17820-0012▼ 17820-002412 Volt dc.24 Volt dc.Oil Change Pumps. Regular Oil Changing is a vitalpart of engine maintenance especially for diesels,and most marine engine installations don’t make iteasy to empty oil sumps without spilling oil intothe bilges or engine room. Whether manual orelectric driven, oil change pumps make life easierand less messy by emptying oil sumps via theoil dipstick.246810111237913516

Circulation pumpsEngine Cooling & Flexible ImpellersPhoto: Fairline Boats plcPhoto: Cruiser yachts: www.cruiseryachts.com2431Jabsco has a range of circulation pumps foruse in low pressure circulation applicationssuch as marine central heating and ballasttransfer systems.1. High Flow CycloneCentrifugal PumpLong life continuously rated centrifugal pump whichgives high flows up to 110 lpm (29 US gpm) at lowpressures. Ideal for hot water circulation duties suchas engine cooling and central heating systems.▼ 50840-0012▼ 50840-0024▼ 50840-2012▼ 50840-202412 Volt dc, 3 /4" NPT connections.24 Volt dc, 3 /4" NPT connections.12 Volt dc, 3 /4" BSP connections.24 Volt dc, 3 /4" BSP connections.2. High Pressure CycloneCentrifugal PumpLong life pump which produces pressures up to1.6 bar (24 psi) making it ideal for transferringdiesel, water and mild chemicals over long or shortdistances. Can be used in conjunction with triggernozzles.▼ 50870-0012▼ 50870-0024▼ 50870-2012▼ 50870-202412 Volt dc, 3 /4" NPT connections.24 Volt dc, 3 /4" NPT connections.12 Volt dc, 3 /4" BSP connections.24 Volt dc, 3 /4" BSP connections.3-6.Magnetic DriveCirculation PumpsSmall compact pumps specifically designed forcirculation duties. Continuously rated, these pumpsprovide trouble free operation for hot watercirculation and raw water cooling applications.▼ 59500-0024▼ 59510-0012▼ 59520-0000▼ 59530-000024 Volt dc.12 Volt dc, 12.5 lpm (3.3 US gpm)@ 0.12 bar (1.74 psi).Connections for 19mm ( 3 /4") ID hose.Long life brushless dc motor.8-24 Volt dc, up to 21 lpm(5.5 US gpm) @ 0.10 bar (1.45 psi).Connections for 3 /4" BSP.Long life brushless dc motor.8-24 Volt dc, 21lpm(5.5 US gpm) @ 0.10 bar (1.45 psi).Connections for 3 /4" BSP.Long life brushless dc motor.7. Wakeboard and Ski BoatBallast PumpWakeboarders will be pleased to learn that Jabsconow offer a water Ballasting Pump that can quicklyadd up to 40 kgs (88 lbs) of water per minute toballast tank systems. The pump is reversible to bothfill and empty ballast tanks and is self-priming andtherefore will not air-lock.▼ 18220-112712 Volt dc.Engine Cooling PumpsFlexible impeller pumps are self-priming andtherefore, are ideal for engine cooling,wash-down, circulation and many generalpurpose on-board or dockside applications.The bronze bodies and stainless steel shaftsare well suited for marine environments.They can operate in either rotationaldirection. A variety of models are availablewith flows from 11 lpm (3 US gpm) to 314lpm (83 US gpm) and with different portorientations to suit virtually any pumpingrequirement.1. Flange Mounted PumpsThe ideal solution for engine cooling due to itscompact size and ease of installation. Fitted asoriginal equipment by the majority of enginemarinisers worldwide as it is adapted to specificallysuit individual marine engines.2. Pedestal PumpsA favourite pump with DIY and smaller enginemarinisers due to installation flexibility and simpledesign. The belt driven pump offers many choices ofport size and flow rates.3. Crank Shaft MountedPumpsJabsco -The Original ImpellerJabsco flexible impellers can be fitted to mostmakes and models of bronze flexible impellerengine cooling, bilge, transfer and generalpurpose pumps. Jabsco flexible impellers aresubjected to rigorous quality processes toensure reliable, efficient and long lastingperformance.4. Flexible ImpellerRemoval ToolThe Flexible Impeller Removal Tool is the easiest wayto remove impellers, especially when the pump ismounted in tight and cramped conditions.▼ 50070-0080 Compact version suitable for impellersup to 57mm (2 1 /4")▼ 50070-0040 Suitable for impellers up to 65mm(2 1 /2") diameter▼ 50070-0200 Suitable for impellers from 65mm (2 1 /2")to 118mm (4 1 /2") diameter✘✓4213infoIdeal for high speed applications due to its ability torun up to 5000rpm with various duty options.Mounts onto either the cam or crank shaft whichavoids fitting additional belts and pulleys.5These centrifugal pumps are designed formultiple applications, from hot watercirculation to diesel transfer. They shouldbe mounted in a position where the inlet iscontinually flooded as they are not selfpriming.Did you know?info■ Impellers are wearing parts and shouldbe replaced annually, a quick and simplejob.6Using the latest in design, materialspecification and manufacturing methods,Jabsco is the leader in the development ofEngine Cooling Pumps worldwide.■ Jabsco knows all there is to know aboutspecialist pumps for cooling marineengines. We invented the flexible impellerpump back in 1938.7Invented in 1938, Jabsco’s flexible impellerdesign was the pioneer of efficient coolingof marine diesel engines.Ideal for heat exchanger, keel and directcooling systems, Jabsco have the ability tocool engines from 10Hp to 1800Hp (7kW -1300kW) with specifically designed pumpmodels to suit various applications.■ Your engine’s cooling system is highlydependent on the rubber impeller in yoursea water pump - engine failure is thelargest single cause of call-outs toemergency services.■ Identifying which Jabsco pump orimpeller fits your engine is simple. Adviceis readily available at your local stockist.17Photo: JeanneauJabsco offer a wide range of replacementparts that fit other makes of engine coolingpump, including Sherwood, Johnson,Mercruiser, Yanmar and Crusader.■ Our expertise ensures that when youchoose Jabsco as your replacement orspare, you can have complete confidencein our quality and suitability.18

Searchlights & FloodlightsImprove your nightsightPhoto: Elan MarineAccessories9. Secondary Remote ControlKitsOur kits are the only way to achieve dual stationcontrol of our remote control searchlights.Available for 135SL, 155SL, 146SL, 255SL, 130mm,180 and 200mm lights, 12 or 24 Volt. Alsoavailable for 155SL and 150mm Electronic ControlLights.▼ 43670-0005 for 135SL (12V or 24V)▼ 43670-0004▼ 18753-0335for 130 (12V), 180 (12V), 155SL (12V),146SL (12V or 24V), 255SL (12V)for 180 (24V), 200 (24V), 255SL (24V)▼ 64044-0000 for SL155 (electronic 12/24V), 150(electronic 12/24V)11. Extension HarnessThese wiring harnesses allow for remote controlinstallations where cable lengths are greater thanthose supplied with the light. Available for standardand electronic control.▼ 43990-0013 3m (10ft) Standard Control.▼ 43990-0014 4.5m (15ft) Standard Control.▼ 43990-0015 7.6m (25ft) Standard Control.▼ 43990-0016 10.7m (35ft) Standard Control.▼ 64042-1011 3m (10ft) Electronic Control.▼ 64042-1007 4.5m (15ft) Electronic Control.▼ 64042-1008 7.6m (25ft) Electronic Control.▼ 64042-1009 15.2m (50ft) Electronic Control.991320°-360° Rotation 60°-75° Vertical Sweep10. Wireless Remote ControlAdds wireless remote control to most* new orexisting Jabsco searchlights. It may be used as wellas, or instead of, secondary remote control kits.Control & 4.5m (15ft) cable included with all RemoteControl Lights, Extension Cables also available.10221468573Remote Control SearchlightsThe advantage of Remote Control is that it allows you to install the light in the best location formaximum effectiveness. They are a very popular addition on power boats, helping locate buoys,moorings and channel markers. Control is by joystick or touchpad. Secondary remote control kits canbe bought for most models which allow control from either the flybridge or main helm.1. 155 (5") SL RC SearchlightOur leading light for style, performance and value.Sweeping curves complement the latest pleasurecraftprofiles. Fingertip control of the watertight halogensealed beam will pick out hazards nearly 275m (900ft)away. 1 lux at 268m (885ft) with 100,000candlepower.▼ 61050-0012▼ 61050-122412 Volt dc.12/24 Volt dc. (with electronic control)2. 135 SL SearchlightDeveloped with the smaller boat in mind the 5” x 3”halogen sealed beam delivers 100,000 candlepowerproviding 1 lux at 262m (850 ft) and 320˚horizontal / 75˚ vertical rotation.▼ 60020-0000▼ 60020-002412 Volt.24 Volt.3. 146 SL RC SearchlightThe 175,000 candlepower 6” x 4” halogen sealedbeam brings long range capability to mid sized boatsgiving 1 lux at 386m (1275 ft). Supplied with a twospeed water resistant control and 4.5m cable, the146SL gives high performance at reasonable costand 360° horizontal/ 75° vertical rotation. Optionaldual Station Control Kit available.▼ 60080-0012▼ 60080-0024146SL 12 Volt dc.146SL 24 Volt dc.4. 255 SL RC SearchlightThis is the largest in our range of high quality plasticbodied lights. Twin 100,000 candlepower bulbs give1 lux at 315m (1040 ft). We supply the 255SLcomplete with a two speed water resistant remotecontrol plus 7.5m (24.6ft) of cable, and optionalDual Station Control Kits are available. The 255SLgives a full 360° horizontal rotation and 60° verticalsweep.▼ 60010-2012▼ 60010-2024255SL 12 Volt dc.255SL 24 Volt dc.Models 180 and 200 are made in brass whichis heavily chromed to give traditional goodlooks and come complete with our waterresistant dual speed control panels. Allmodels have 70° vertical and 450° horizontalsweeps.5. 130 (5") RC SearchlightThe 130mm model is available in 12 volt only andoperates in either flood or spot beam mode giving72,000 (spot) or 30,000 (flood) candlepower and 1lux at 300m (990ft).▼ 62026-4002 H12 Volt dc.6. 150 (6") RC SearchlightRemote Control Searchlight with digital multifunctionprocessor control, plus optional HID (HighIntensity Discharge) light source. Truly the ultimatesearchlight. HID models with 600,000 candlepowerspot beam - 1 lux at 680m (2210ft). Sealed beammodels with 200,000/50,000 candlepowerspot/flood beam -1 lux at 418m (1380ft).▼ 63042-0012▼ 63042-0024▼ 63022-001212 Volt dc HID.24 Volt dc HID.12/24 Volt dc sealed beam.7. 180 (7") RC SearchlightOur 180mm model is available in either 12 or 24Volt, giving 250,000 candlepower and 1 lux at418m (1380ft)▼ 62040-4002▼ 62040-400612 Volt dc.24 Volt dc.8. 200 (8") RC SearchlightThe most powerful remote control light wemanufacture is the 200mm model, available only in24 Volts giving huge 500,000 candlepower outputand really long range illumination. 1 lux at 719m(2375ft).▼ 62042-400624 Volt dc.▼ 60000-0000▼ 60000-0024Control c/w receiver 12 Volt dcControl c/w receiver 24 Volt dc* Not suitable for use with 155SL (61050-1224) or6" RC (12v or 24v)Deck FloodlightsBracket mounted floodlights give goodservice in deck illumination, especially onsmall fishing boats and commercial craft.Flush mount floodlights provide a cleaninstallation ideally suited for leisure craft.Two beam shapes are available, trapezoidalfor deck illumination and flood for transommounting. In each case bulb adjustmentallows the beam to be directed to therequired area. A range of compact, purposedesigned floodlights for deck, cockpit orboarding point on leisure, commercial,fishing and safety craft available in two sizes.12. 3" x 5"▼ 45900-1000▼ 45903-000213. 4" x 6"▼ 45900-4000▼ 45900-0000▼ 45900-000112 Volt dc white.Replacement sealed beam.12 Volt dc Ultra Bright white(not available in Europe)12 Volt dc white.24 Volt dc white.infoA marine searchlight has to be capable ofperforming a range of tasks from locatingbuoys to illuminating a narrow channel andunfortunately, occasionally searching for aman overboard. To this end it needs to bedesigned to offer the best combination ofbeam spread (width) and intensity (length), forboth shorter and longer range work.A spot beam has a 7° beam spread as opposedto 40° on a flood beam and will consequentlyreach at least 3 times further. Sometimes asearchlight beam is defined at 2° but foranything less than a large stable ship this is notusable, being difficult to aim and offering tooconcentrated a beam for effective sweepingwhen mounted on a small craft. We quoteperformance of our searchlight range in twoways; Candlepower and Lux.Dual Station Kits also available with 4.5m (15ft) cable14. Flush Mount FloodlightsThe new Jabsco flush mount floodlight features asmall footprint design with a dual gasket to ensureweatherproof installations. The sealed beam "flood"provides an even beam pattern with no hot spots,and the clean edge cut-offs prevent stray lighting.▼ 45930-2012Floodlight with flood beam 12 Volt dc.Candlepower is a useful guide to actual lightproduced but doesn’t measure the efficiencyof reflector design to actually project that lightat the target. The most relevant comparisonguide is LUX, which is the measurement ofactual light available at a given distance (wequote range at 1 lux).Remote Control Searchlights are suitable forcraft from 5m (16.4ft) upwards, and theirmain advantage is that they allow the light tobe situated away from the helm in a positionof maximum effectiveness. Control is via aneight way joystick and a Secondary RemoteControl Kit is available for most lightsallowing control from both flybridge andsaloon.Floodlights illuminate deck areas or can bemounted in the stern to provide a wide beamspread for local area lighting.111412131122

CompassesFor a full range ask for our Compass CatalogueCorsair ® IV SeriesThe Corsair ® IV compasses offer you a choice oftraditional flat card, front read and dual read cardmodels. All models feature the GLOBALBalanceNO-SPIN card design. Available in flush, binnacle orbracket mounting styles, for power or sail, theseattractive 95mm (3 3 /4") compasses sport a uniquetelescoping hood which protects the compasswhen not in use. Corsair ® IV compasses provide thestability needed for high speed powerboatapplications and are fully gimbaled for sailboatinstallations. Navy red L.E.D. night illumination andbuilt-in compensators are standard.7. Corsair ® IV Binnacle MountSaturn ® SeriesThe compact 95mm (3 3 /4") Saturn ® compasses areavailable with a front reading card, flat card ordual reading card. All models feature theGLOBALBalance NO-SPIN card design and are fullygimbaled. Saturn ® compasses feature an adjustablehood, compensators and night illumination.10. Saturn ® Dual-Reading Card▼ A140▼ A142▼ A149Dual Read Red Card, Black Finish.Flat Card, Black Finish.Front Reading, Black Finish.8713342541. QuestWhether your fun takes you on the water oroff-road, the new Danforth ® Quest compass willpoint the way. The Quest Compass's uniquebracket design provides the versatility to mount yourcompass at any angle–on horizontal, vertical andeven overhead surfaces. Our exclusive NO-SPIN cardtechnology gives you guaranteed accuracy androck-steady readings in a small, sporty size. Hi-fluxcorrector magnets provide the added measure ofadjustment often required for automobile, RV, ATV,snowmobile and certain marine installations. 12 Voltdc red night illumination is standard.▼ C100▼ C101▼ C102▼ C103Front Read, Black Card, Black Finish.Front Read, Blue Card, White Finish.Front Read, Blue Card, Grey Finish.Front Read, Black Card, Yellow Finish.Skipper II SeriesSkipper compasses have exclusive guaranteedno-spin front reading GLOBALBalance cards with5° graduations for stable readings at high speeds orin rough weather. Full 30° card tilt angle. Otherfeatures include large illuminated 67mm (2 5 /8")acrylic dome and high visibility bright yellow or redlubber line. All Skipper models have an expansiondiaphragm, cross-bar compensating system, andnight illumination.2. Skipper II Flush Mount▼ A92▼ A92G▼ A92WFront Read, Black Finish with Hood.Front Read, Blue Card, Grey Finish with Hood.Front Read, White Finish with Hood.3. Skipper II Bracket MountA91 compasses feature a unique ratcheting bracketfor mounting on horizontal to vertical and overheadsurfaces.▼ A80B▼ A80G▼ A91▼ A91G▼ A91WFront Read, Black Finish.Front Read, Blue Card, Grey Finish.Front Read, Black Finish.Bracket mount with HoodFront Read, Blue Card, Grey Finish,Bracket mount with Hood.Front Read, White Card, White Finish, Bracketmount with Hood.4. Skipper II Surface MountA93 features a unique swivel base for mounting onangled surfaces. A121 can be mounted on curvedsurfaces and can be easily removed for storage.▼ A93B▼ A93G▼ A93W▼ A121Front Read, Black Finish.Front Read, Blue Card, Grey Finish.Front Read, White Finish.Front Read, Black Finish.Cruiser SeriesCruiser compasses are available with (86mm) 3 3 /8"apparent diameter, front or flat reading compasscards. Designed for cruising class boats in the 5.5m(18ft) to 9m (30ft) range, all Cruiser compasseshave crystal clear spherical acrylic domes, cross-barcompensators, and red night illumination.5. Cruiser Flush Mount▼ A154▼ A154W▼ A154WBFront Reading, Black Finish.Front Reading, White Finish.Front Reading, White with Blue Card.6. Cruiser Binnacle Mount▼ A152▼ A155Front Reading, Black Finish.Flat Card, Black Finish.▼ C352-3▼ C352F-3Binnacle Mount, Flat Black Card,Black Finish.Binnacle Mount, Front Reading BlackCard, Black Finish.8. Corsair ® IV Bracket Mount▼ C398-3▼ C398F-3Bracket Mount, Flat Black Card,Black Finish.Bracket Mount, Front Reading BlackCard, Black Finish.9. Corsair ® IV Flush Mount▼ C399-3▼ C399-3W▼ C399D-3▼ C399D-3W▼ C399D-3WB▼ C399F-3▼ C399F-3WFlush Mount, Flat Black Card,Black Finish.Flush Mount, Flat Black Card,White Finish.Flush Mount, Dual Reading Black Card,Black Finish.Flush Mount, Dual Reading BlackCard, White Finish.Flush Mount, Dual Reading Blue Card,White Finish.Flush Mount, Front Reading,Black Card, Black Finish.Flush Mount, Front ReadingBlack Card, White Finish.infoFlat Card Compasses feature saucer-shapedcompass cards. They are installed forward ofthe helm, and below eye level, so the skippercan glance down to read the course.GLOBALBalance models feature a cardfloatation chamber, providing exceptionalcard stability.Front reading Compasses have domeshapedcompass cards which are read at thefront edge. They are mounted forward of thePatentedAvailable in flush, bracket and binnacle (surface)mounting styles, Danforth’s attractive compassesfeature our NO-SPIN GLOBALBalance cardsystem, which guarantees a perfectly balancedcard anywhere in the world. This patent pendingtechnology makes the balancing of cards forgeographic locations a thing of the past. And, ofcourse, our exclusive NO-SPIN technologyguarantees rock steady performance, even in theroughest conditions.helm and are a good choice when thecompass is mounted just below the skipper’sline of sight. GLOBALBalance models featurea card floatation chamber, providingexceptional card stability.Dual reading Compasses feature a modifiedflat card with an edge “skirt” for front readingas well. GLOBALBalance models feature acard floatation chamber, providingexceptional card stability.9101099info6GLOBALBalance System. Magneticcompasses normally require special cardbalancing for use in the SouthernHemisphere. The exclusive (patent pending)Danforth ® GLOBALBalance systemeliminates the need for latitude-specific cardbalancing. Only Danforth ® offers a full rangeof compass models balanced for use worldwide.23GLOBALBalancemodels remain level in all six zonesPhoto: Jeanneau24

Wind & Water PoweredGenerators Free, planet-friendly power...AquaGen Water Towed GeneratorsAquaGen’s are towed water-driven generators suitable for all sailboats and sailing speedsin blue and coastal waters. They can provide enough power to meet all on-boardrequirements while under sail, offering powerful, silent performance with low drag.Installation is quick and simple and can easily be mounted or de-mounted.1&2. Aquagen Generator1. Aqua4GenAqua4Gen produces up to 11 amps continuously at8 knots boat speed when fitted with the largerturbine blades and 10 amps at 10 knots with thesmaller blades, both are included.▼ AQ412▼ AQ42412 Volt water generator & turbine24 Volt water generator & turbine2. Aqua6GenAqua6Gen produces up to a continuous 16 amps at12 knots boat speed and is fitted with the smallerblades.▼ AQ612▼ AQ62412 Volt water generator & turbine24 Volt water generator & turbineAeroGen Wind GeneratorsOur wind generators run at low rotational speeds for quietness, safety and minimal wearand tear. With high strength generator magnets, heavy-duty sealed bearings and toughreplaceable blades, AeroGen is built to give you years of reliable, trouble-free operation.11. Aero2GenLight, compact wind generator, ideal for smallyachts and weekenders, with output up to 4 amps.▼ LVM212▼ LVM22412 Volt for 25mm (1") pole24 Volt for 25mm (1") pole1&2. Aquagen Turbine2. Aero4GenMid-sized wind generator for cruising yachts withoutput up to 20 amps.▼ LVM41212 Volt for 25mm (1") pole▼ LVM412-1.512 Volt for 38mm (1 1 /2") pole▼ LVM42424 Volt for 25mm (1") pole▼ LVM424-1.524 Volt for 38mm (1 1 /2") pole3. Aero6GenPowerful wind generator for cruising yachts andlive-aboard vessels with output up to 30 amps.▼ LVM612▼ LVM62412 Volt for 38mm (1 1 /2") pole24 Volt for 38mm (1 1 /2") polePhoto: Andy Stafiniak. www.sxc.huAqua to AeroGen – Wind & Water GeneratorsThe Aqua4Gen can easily be converted into a wind generator, providing in a single unit awater generator when sailing and a wind generator when at anchor or sailing, with thesame wind performance as the Aero4Gen. You can convert the water towed generatorinto wind mode in less than 5 minutes... remove the mounting rope, bolt the unit into itspole-mounted cradle, add the fan assembly and tail fin, make the water proof connectionsand that’s it! Converts back equally quickly from wind mode back to water towed mode.23. Aqua4AeroGenCombined wind and water towed generator withthe same performance as the Aqua4Gen andAero4Gen.▼ AQA412▼ AQA42412 Volt combined wind and watergenerator24 Volt combined wind and watergeneratorPhoto: Najad Yachts of SwedenFrom AQUA4GEN to AERO4GEN➜ ➜ ➜ ➜ ➜ ➜ ➜➜ ➜ ➜ ➜ ➜ ➜ ➜253infoWhen you are sailing, wind and water poweredgenerators can keep your batteries chargedwithout running the engine, supplying youwith a free, quiet, inexhaustible, planet friendlypower, and at no additional fuel demand orcost. When you are away from your boat youcan rely on wind powered generators to keepyour batteries charged day & night wheneverthere is a breeze, keeping your bilge pump andother essential electrics running without risk offlat batteries. So, when you arrive at your boatyou will have lights that light up, a dry bilgeand a refrigerator that gets going straightaway! It is essential that your wind or waterpowered generator system is installed with thecorrect Battery Regulator which stops any overchargingof your boats battery system. For aselection guide, performance ratings and helpin choosing the correct generator andregulator for your boat please contact yourlocal LVM dealer or visit www.lvm-ltd.com.Battery Regulator➜ ➜ ➜ ➜ ➜ ➜ ➜➜ ➜ ➜ ➜ ➜ ➜ ➜Converting from water to wind modeFrom one to the other in less than 5 minutes326

Discover us on the World Wide Webwww.jabsco.com www.danforthcompasses.com www.rule-industries.com www.jabsconews.com www.lvm-ltd.comFind comprehensive details on all our productsincluding their technical specifications. The site givesyou 24 hour access to all the information you need,faster, cheaper and at a time that suits you.■ Comprehensive Search facility to speedup location of the required product.■ Get full technical data by clickingthrough the links for each categoryand product area.■ Many exploded diagrams are availableto assist in identifying parts.■ Technical data sheets in PDF format fordownloading.■ Easy to use Distributor locator.■ Support centre to help specify pumpsand diagnose problems.Jabsco, Rule, Danforth and LVM haveserved the world's marine market forwell over half a century, since theFlexible Impeller pump was inventedin the 1930's. Today Jabsco, Rule, LVMand Danforth make up the FlowControl Group who are part of ITTCorporation. ITT Corporation(www.itt.com) supplies advancedtechnology products and services inkey markets including: fluid and watermanagement; electronic interconnectsand switches; defensecommunications, opto-electronics,information technology and servicesand other specialty products.Headquartered in White Plains,New York, the company generated$9 billion revenue in 2007.Local DistributorLocal DealerITT Flow Control, 1 Kondelin Road, Cape Ann Industrial Park, Gloucester, MA 01930Tel: +1 978 281 0440 Fax: +1 978 283 2619ITT Flow Control, Bingley Road, Hoddesdon, Hertfordshire EN11 0BUTel: +44 (0) 1992 450 145 Fax: +44 (0) 1992 467 132NHK Jabsco Co Ltd, 3-21-10, Shin-Yokohama, Kohoku-ku, Yokohama 222Tel: +81 (0) 45 475 8906 Fax: +81 (0) 45 475 8908Jabsco GmbH, Oststraße 28, 22844 NorderstedtTel: +49 (0) 40 53 53 73 0 Fax: +49 (0) 40 53 53 73 11Jabsco Marine Italia S.r.l., Via Tommaseo, 6, 20059 Vimercate, MilanoTel: +39 039 6852323 Fax: +39 039 666307Cleghorn Waring & Co (Pump) Ltd,Icknield Way, Letchworth Garden City, Hertfordshire SG6 1EZTel: +44 (0) 1462 480 380 Fax: +44 (0) 1462 482 422USAUKJAPANGERMANYITALYUKWarranty: All products of the company are sold and all services of the company are offered subject to the company’s warranty and terms and conditions of sale, copies of which will be furnished upon request© Copyright 2008 ITT Corporation 43001-0548Cover photos courtesy of Fairline Boats plc and Najad Yachts of SwedenDiscover Jabsco at www.jabsco.com