ESWA Catalog 241C:ESWA Catalog 241 final copy - EVAPCO.com

16
Engineering Data & Dimensions
ESWA Models 102-23H to 102-46K
Note: The coil connections increase to 6” BFW when the flow rate exceeds 450 gpm.
This required option is referred to as the High Flow coil configuration.
2 MPT
MAKE-UP
2 MPT
DRAIN
M
19-3/4”
3 MPT
OVERFLOW
4 BFW
FLUID OUT
4 BFW
FLUID IN
A
20-1/8”
U
L
33-7/8 25-1/2”
8‘ 5-1/2”
H
P
30-1/2”
M
M
11’ 11-3/4”
Coil
Model Heaviest Volume Gallons Conn. Operating Lower Upper Coil Height
Number 1 Shipping Section2 Operating HP CFM HP GPM (gallons) Required3 Weights (lbs.) Fans Spray Pump Remote Sump
Size Weight (lbs.) L U A H
ESWA 102-23H 9,730 6,410 14,470 7.5 49,700 7.5 800 160 330 10" 12,640 6' 3-3/8" 7' 2-1/8" 19-1/2" 13' 5-1/2"
ESWA 102-23I 9,740 6,410 14,480 10 54,600 7.5 800 160 330 10" 12,650 6' 3-3/8" 7' 2-1/8" 19-1/2" 13' 5-1/2"
ESWA 102-33H 10,090 6,420 14,830 7.5 48,900 7.5 800 160 330 10" 12,990 6' 3-3/8" 8' 2-1/8" 19-1/2" 14' 5-1/2"
ESWA 102-33I 10,100 6,420 14,840 10 53,800 7.5 800 160 330 10" 13,000 6' 3-3/8" 8' 2-1/8" 19-1/2" 14' 5-1/2"
ESWA 102-33J 10,230 6,420 14,970 15 61,500 7.5 800 160 330 10" 13,130 6' 3-3/8" 8' 2-1/8" 19-1/2" 14' 5-1/2"
ESWA 102-33K 10,290 6,420 15,030 20 67,200 7.5 800 160 330 10" 13,190 6' 3-3/8" 8' 2-1/8" 19-1/2" 14' 5-1/2"
ESWA 102-34H 11,190 7,520 16,340 7.5 48,900 7.5 800 209 330 10" 14,500 6' 10-7/8" 8' 2-1/8" 27" 15' 1"
ESWA 102-34I 11,200 7,520 16,350 10 53,800 7.5 800 209 330 10" 14,510 6' 10-7/8" 8' 2-1/8" 27" 15' 1"
ESWA 102-34J 11,330 7,520 16,480 15 61,500 7.5 800 209 330 10" 14,640 6' 10-7/8" 8' 2-1/8" 27" 15' 1"
ESWA 102-34K 11,390 7,520 16,540 20 67,200 7.5 800 209 330 10" 14,700 6' 10-7/8" 8' 2-1/8" 27" 15' 1"
ESWA 102-35H 12,350 8,680 17,910 7.5 48,900 7.5 800 259 330 10" 16,070 7' 6-3/8" 8' 2-1/8" 34-1/2" 15' 8-1/2"
ESWA 102-35I 12,360 8,680 17,920 10 53,800 7.5 800 259 330 10" 16,080 7' 6-3/8" 8' 2-1/8" 34-1/2" 15' 8-1/2"
ESWA 102-35J 12,490 8,680 18,050 15 61,500 7.5 800 259 330 10" 16,210 7' 6-3/8" 8' 2-1/8" 34-1/2" 15' 8-1/2"
ESWA 102-35K 12,550 8,680 18,110 20 67,200 7.5 800 259 330 10" 16,270 7' 6-3/8" 8' 2-1/8" 34-1/2" 15' 8-1/2"
ESWA 102-36I 13,470 9,790 19,440 10 53,800 7.5 800 308 330 10" 17,600 8' 1-7/8" 8' 2-1/8" 42" 16' 4"
ESWA 102-36J 13,600 9,790 19,570 15 61,500 7.5 800 308 330 10" 17,730 8' 1-7/8" 8' 2-1/8" 42" 16' 4"
ESWA 102-36K 13,660 9,790 19,630 20 67,200 7.5 800 308 330 10" 17,790 8' 1-7/8" 8' 2-1/8" 42" 16' 4"
ESWA 102-43J 10,640 6,420 15,380 15 60,500 7.5 800 160 330 10" 13,540 6' 3-3/8" 9' 2-1/8" 19-1/2" 15' 5-1/2"
ESWA 102-43K 10,700 6,420 15,440 20 66,200 7.5 800 160 330 10" 13,600 6' 3-3/8" 9' 2-1/8" 19-1/2" 15' 5-1/2"
ESWA 102-44I 11,610 7,520 16,760 10 52,900 7.5 800 209 330 10" 14,920 6' 10-7/8" 9' 2-1/8" 27" 16' 1"
ESWA 102-44J 11,740 7,520 16,890 15 60,500 7.5 800 209 330 10" 15,050 6' 10-7/8" 9' 2-1/8" 27" 16' 1"
ESWA 102-44K 11,800 7,520 16,950 20 66,200 7.5 800 209 330 10" 15,110 6' 10-7/8" 9' 2-1/8" 27" 16' 1"
ESWA 102-45I 12,770 8,680 18,330 10 52,900 7.5 800 259 330 10" 16,490 7' 6-3/8" 9' 2-1/8" 34-1/2" 16' 8-1/2"
ESWA 102-45J 12,900 8,680 18,460 15 60,500 7.5 800 259 330 10" 16,620 7' 6-3/8" 9' 2-1/8" 34-1/2" 16' 8-1/2"
ESWA 102-45K 12,960 8,680 18,520 20 66,200 7.5 800 259 330 10" 16,680 7' 6-3/8" 9' 2-1/8" 34-1/2" 16' 8-1/2"
ESWA 102-46I 13,890 9,800 19,860 10 52,900 7.5 800 308 330 10" 18,010 8' 1-7/8" 9' 2-1/8" 42" 17' 4"
ESWA 102-46J 14,020 9,800 19,990 15 60,500 7.5 800 308 330 10" 18,140 8' 1-7/8" 9' 2-1/8" 42" 17' 4"
ESWA 102-46K 14,080 9,800 20,050 20 66,200 7.5 800 308 330 10" 18,200 8' 1-7/8" 9' 2-1/8" 42" 17' 4"
4 Dimensions5 1 Model numbers will end in “-Z” for units with Series Flow piping configuration. Series Flow will require factory internal crossover piping. Model numbers
will include “C” for units with stainless steel coil(s), “R” for units with low sound fan(s) and “S” for units with an option that negates CTI Certification.
2 Heaviest section is the lower section.
3 Gallons shown includes water in suspension in unit and piping. Allow for additional water in bottom of remote sump to cover pump suction and strainer
during operation (12" would normally be sufficient).
4 When a remote sump arrangement is selected, the spray pump, suction strainer and associated piping are omitted; the unit is provided with an oversized
outlet to facilitate drainage to the remote sump.
5 Unit dimensions may vary slightly from catalog. See factory certified prints for exact dimensions. Coil connections are 4 inch bevel for weld (BFW). Other
connection types such as grooved for mechanical coupling or flanged are also available as options.
ACCESS
DOOR
ACCESS
DOOR