EMI/EMP Filter Connectors Catalog - Glenair, Inc.

1000 Hour Grey TMThe Advanced FormulaNi-PTFE Plating Process forEMC ApplicationsNew Cadmium FreeRoHS CompliantPlating Process Breaks1000 Hour CorrosionProtection Barrier!RoHS-CompliantThe MIL-DTL-38999 Rev. L detail specification establishesseveral new cadmium-free conductive plating options includinghigh-performance nickel-fluorocarbon polymer. The Glenairadvanced formula 1000 Hour Grey TM plating process (Ni-PTFE)meets all D38999 performance requirements including a shell-toshellconductivity maximum 2.5 millivolt drop potential.1000 Hour Grey TM delivers outstanding performance in abroad range of land, sea, air and space interconnect applications.The non-reflective, non-magnetic, gun-metal gray surface finishis an ideal choice for tactical military systems with extraordinarycorrosion protection and EMC requirements.Advanced Durability, Lubricity PlusOutstanding Temperature Resistance!The mechanical, electrical and environmental performance of1000 Hour Grey TM is truly outstanding, far surpassing that of othermetal alloy/fluorocarbon polymer plating solutions:/ EG2002 / 95n 1000+ Hrs. Salt Sprayn Hexavalent Chromium Freen Max 2.5 Millivolt Drop Potential n Potassium Formate Resistantn -65°C to 175°C Temp. Rating n Low Shell-to-Shell Resistancen 336+ Hrs. Sulfur Dioxide Resistance n Adheres to Composite Plasticn Non-Magneticn 500+ Mating Cyclesn Cadmium Freen Low Outgassingn Low Coefficient of Friction n Available Now!Glenair, Inc.1211 Air Way • Glendale, CA 91201-2497 • Tel: 818-247-6000 • Fax: 818-500-9912 • E-Mail: sales@glenair.com

Open for Business:Glenair's Class 10,000 Filter Array Clean RoomWhen Glenair launched its filter connector offering in 2005, we alreadyhad plenty of in-house capacity for the manufacture of standardenvironmental and hermetic connectors. But we were completelydependent on outside suppliers for an essential component part in EMI/EMPfilters: the actual multi-layer planar array filter element.So, starting in 2008, we began to manufacture our own filter arrays. The filterarray manufacturing process is not a simple one: First, chemists and techniciansin our class 10,000 clean room mix a ceramic slurry and cast it onto Mylar tape. Acomputer-controlled machine then cuts and stacks thin ceramic layers and screenprints each layer with metallic film for perfect capacitance. The “layer-cakes” arethen cured for sizing, machined for contact alignment and positioning, fired forhardness, and plated for conductivity. Finally, specially trained assemblers usemicro-soldering techniques to affix contacts within the arrays, often consisting ofmultiple ceramic capacitor discs.Our new planar array facility allows us to provide extremely fast deliveries ofEMI/EMP filter connectors with outstandingly high levels of quality. Our verticallyintegrated facility is open for business. Please call the factory for a quote.

A World ofInterconnectSolutionsGlenair, Inc.1211 Air Way • Glendale, California • 91201-2497Telephone: 818-247-6000 • Fax: 818-500-9912 • sales@glenair.comwww.glenair.comGlenair Industrial Power andSignal Connector Group25 Village LaneWallingford, CT06492Telephone:203-741-1115Facsimile:203-741-0053sales@glenair.comGlenair UK Ltd40 Lower Oakham WayOakham Business ParkP.O. Box 37, MansfieldNotts, NG18 5BY EnglandTelephone:44-1623-638100Facsimile:44-1623-638111sales@glenair.co.ukGlenair Microway Systems7000 North Lawndale AvenueLincolnwood, IL60712Telephone:847-679-8833Facsimile:847-679-8849Glenair Nordic ABGustav III : S Boulevard 46S - 169 27 SolnaSwedenTelephone:46-8-50550000Facsimile:46-8-50550001sales@glenair.seGlenair Electric GmbHSiemensstrasse 9D-61449 SteinbachGermanyTelephone:49-6171-5905-0Facsimile:49-6171-5905-90germany@glenair.comGlenair IbericaC/ La Vega, 1645612 VeladaSpainTelephone:34-925-89-29-88Facsimile:34-925-89-29-87sales@glenair.esGlenair Italia S.R.L.Via Santi, 120037 Paderno DugnanoMilano, ItalyTelephone:39-02-91082121Facsimile:39-02-99043565sales-italia@glenair.itGlenair France SARL7, Avenue ParmentierImmeuble Central Parc #231200 ToulouseFranceTelephone:33-5-34-40-97-40Facsimile:33-5-61-47-86-10sales@glenair.fr© 2008 Glenair, Inc. Printed in U.S.A.

AEMI/EMP Filter ConnectorProduct Selection GuideIntroduction to Filter ConnectorsABMilitary Standard Type Circular Filter ConnectorsBCSeries 80 "Mighty Mouse" Filter ConnectorsCDMIL-DTL-83513 Type Micro-D Filter ConnectorsDEMIL-DTL-24308 Type D-Subminiature Filter ConnectorsEFSeries ITS MIL-DTL-5015 Type Filter ConnectorsFGSpecial Purpose and Custom Filter ConnectorsGHEMI/RFI Connector AccessoriesHIndex: Inside Back Cover

IntroductionIntroduction to Filter ConnectorsPractical Solutions for Electromagnetic CompatibilityAPractical Solutions for Electromagnetic CompatibilityDesigning interconnect systems whichdeliver clean data streams, undistorted byelectromagnetic interference or pulses (EMI/EMP) is an enormous challenge. ElectromagneticCompatibility (EMC) requirements have beenestablished to insure that the performance of anindividual electronic device is not degraded dueto its proximity to high-frequency electromagneticinterference, and also to prevent the device itselffrom becoming a potential source of EMI. Sensitiveelectronic devices also need to be protected fromvoltage spikes generated during transient states orstatic discharges in the overall system.Protecting sensitive devices and achievingelectromagnetic compatibility in an interconnectenvironment, such as an aircraft avionics bay, istypically achieved through the application of EMI/EMP screening, grounding and filtering technologies.Interconnect industry techniques for acheiving effectiveEMC include:n Reflecting the signals outright,n Reducing line-of-sight entry points inequipment and cable shields,n Absorbing the interference inpermeable material and dissipatingit as heat,n Conducting the EMI along the skin ofthe device/cable and taking it toground,n Filtering out interference at thepoint of interconnection, usingspecialized connectors which provideEMI suppression, and/or,n Adding transient voltage suppressiondiodes to clamp voltage spikes.In most applications, EMI management isnot accomplished through the use of a singletechnique such as filtering, but rather throughthe combined use of various EMC technologies.While black box device manufacturers mayincorporate a filter connector as a universalprophilactic against future, unknown levelsof EMI, the final integration of the device intoa complex application environment typicallyrequires the use of additional EMC technologies.At the most practical level this includes groundingconductively plated equipment housings withstuds and straps, shielding cable conductorswith metallic brading, tape or conduit, andeliminating line-of-sight entry points through whichelectromagnetic waves can penetrate or escapethe equipment. This later step is commonlyperformed by backshell devices which providea reliable grounding platform for cable shieldingand mechanically mask the conductor-to-contacttermination from noisy waves of EMI.Cross-sectional view of a Micro-D connector assemblyoptimized for EMI noise suppression. Note the useof braided shielding, shield termination band and EMIground spring. Effective EMI noise suppression may beaccomplished solely with the use of filter connectors,but many designers prefer to augment the noisesuppression provided by filters with accessory hardwaresuch as banding backshells, conductive gaskets,gounding studs and cable shielding.The frequency of the interfering signal is acritical concern when selecting EMI shieldingdevices. Low frequency magnetic waves in the 1to 30 KHz range, for example, are most effectivelyshielded by absorbing the signals in permeablematerial. High frequency signals (30 KHz andabove) are most effectively shielded by reducingentry windows and by insuring adequate surfaceconductivity to ground.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-2E-Mail: sales@glenair.com

Introduction to Filter ConnectorsApplication ChecklistIntroductionSpecification Reference: MIL-DTL-38999 MIL-DTL-5015 MIL-C-26482 MIL-DTL-83723 MIL-DTL-83513 Ser. 79 Micro-Crimp Ser. 80 Mighty Mouse MIL-C-28840 MIL-DTL-24308 ARINC 600Series and/or Slash Sheet:Filter Capacitance:1PIN POSITION(Or Groupof Pins)FILTERVALUE*[pF] + 20%Insertion Loss:GROUPFREQUENCY[MHz]1ATTENUATION[dB]AShell Style: Jam-Nut Receptacle Plug Flange Mount Receptacle Dual Flange PCB Receptacle Solder Mount Receptacle Connector Adapter (Sav-Con ® )Shell Size/Arrangement:Pin Count:Contact Gender: Pin SocketHermetic: Yes NoShell Rotation Position:234*1KHz, 25°CDesired Filter Circuit Type: C Filter C-L Filter L-C Filter Pi FilterLabeling and Marking Instructions:GROUP GROUP GROUP234IR:VoltsDWV:VoltsCapacitor Array Code:Shell Material and Finish:Termination (PC Tail, Solder Cup,Piggyback Crimp, etc.):Temperature Tolerance:Operating: - °C to + oCStorage: - °C to + o COperating Frequency Range ofEffected Equipment:Capacitor Array Code/Capacitance RangeClass Pi-Circuit (pF) C-Circuit (pF)X 160,000 - 240,000 80,000 - 120,000Y 80,000 - 120,000 40,000 - 60,000Z 60,000 - 91,000 30,000 - 45,500A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 600G 400 - 600 200 - 300Note: Forany capacitorarray codelisted, we canaccommodateboth C circuitand Pi circuitcapacitancevalues.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-3E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsEMC Materials and TechnologiesAEMC Materials and TechnologiesIn interconnect cable assemblies, conductivewires and cables act as antennas to pickup and/or radiate noise. Cables can coupleelectrical or magnetic fields, or even radiatedenergy from another cable (known as “crosstalk”).The most basic of all material requirements istherefore to apply a conductive shielding aroundcable conductors to take electrical and magneticfield voltages to ground. Braided shieldingprovides the cable assembly with strength,durability and flexibility with just a slight sacrificeto effectiveness (compared to a solid conduit,conductive tape or other material). But athigher frequencies, braided shielding canlose effectiveness as the windows in thebraid can become relatively largercompared to the wavelengthof the EMI. This is whyother materials, such asmetal-core conduit,conductive junctionand equipmentboxes, conductivegaskets, and so onalso play important roles in EMCapplications.Many of the EMC materialsand technologiessupplied by Glenairare full-fledgedproduct lines. Others areinnovative techniques wecan apply to a broad range ofinterconnect products. External and internalgrounding springs are one such example. Thesegold-plated springs offer lower shell-to-shellresistance and are compatible with standardmating receptacles. Most of the connectorsproduced by Glenair can be equipped withgrounding fingers for improved EMI shielding andgrounding.Most military grade interconnect devices andequipment housings are made of materials thataccept conductive plating to provide some EMIprotection outright and simultaneously facilitategrounding through the use of attached metallic ormetallized textile studs and straps. While platedaluminum is the most common materialfor EMC applications, platedcomposite thermoplasticoffers the ability toreduce weightandcorrosionwhile stillmaintainingan effectiveground path. Thefollowing section describes the manyindividual Glenair materials and technologiesused for effective EMC.Conductive Braided ShieldingLow frequency waves in the 1 to 30kHz range can be absorbed into permeableconductive materials, such as shielding placedaround individual conductors within a cableassembly or wire harness. This shielding materialeither captures the EMI taking it to ground ordissipates it as heat. Metallic braids and hightechplated fabrics also shield cable conductorsfrom line-of-sight penetration or escape, again bytaking EMI to ground.A wide range of cable shield terminationtechnologies are available—the effectiveness ofeach style, and the complete shielding solution,can be measured using a transfer impedance testto evaluate the cable shield performance againstelectrostatic discharge and radiated emissionsat various frequencies up to the gigahertz range.Shielding effectiveness can be calculated for arange of frequencies by taking the ratio of transferimpedance for an unprotected device or system© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-4E-Mail: sales@glenair.com

Introduction to Filter ConnectorsEMC Materials and TechnologiesIntroductioncompared to transfer impedance of a protecteddevice or system, with the result expressed indecibels. Glenair cable shielding is manufacturedin a wide range of designs and configurations.Materials include tin-plated copper, nickel-platedcopper and tin-plated iron/copper. AmberStrand®is metallized composite thermoplastic materialthat matches metal shield performance at afraction of the weight. Each material has specificperformance advantages ranging from strength,to conductivity and corrosion protection.Braided shields provide exceptional structuralintegrity while maintaining good flexibility andflex life. They also minimize low-frequencyinterference at audio and RF ranges. Thematerial’s ability to contribute to EMI reductionSeries 80 "Mighty Mouse"Glenair produces a miniaturizedconnector family called the Series 80“Mighty Mouse.” It is a smaller and lighterequivalent connector to the popular MIL-DTL-38999. A critical aspect of EMC is toensure the integrity of the ground whenconnectors are mated. Shell-to-shellconductivity tests measure this integrity interms of a voltage drop across the matedpair initially, and following various stressors.Shielding Effectiveness (dB)120.00110.00100.0090.0080.0070.0060.0050.0040.00Shielding Effectiveness (dB)120.00110.00100.0090.0080.0070.0060.0050.0040.0030.00Mighty Mouse Mated ConnectorsElectroless Nickel PlatingLayout 6-7Layout 12-37Layout 15-8520.001 10Layout 100 6-7 1,000 10,000 100,000 1,000,000Frequency (kHz)Layout 12-37Layout 15-85A30.0020.001 10 100 1,000Frequency (MHz)depends on the signal amplitude and frequencyin relation to braid mesh count, wire diameterand material. Generally, the tighter the mesh andthe higher the percentage of braid coverage,the more effective the shield is against highfrequencyemissions. An alternative is to usemore than one braid shield.Metal Braid is offered in Tubular or Flatconfigurations in a variety of sizes from 1/32inch (0.8 mm) to 2-1/2 inches (63.5 mm), andcan easily be slipped over convoluted tubingand conduit as well as wire bundles, cables orsimilar constructions. Glenair’s in-house braidingproduction capacity is truly impressive: MoreWell designed and engineeredconnectors will meet the requirements ofEIA-364-83 for shell-to-shell conductivityin the initial condition, following salt spray,following 500 mating cycles, and followingshock and vibration. In the case of theSeries 80 “Mighty Mouse’” the mated pairdid not exceed the 10 millivolt maximumvoltage drop as required under EIA-364-83.The “Mighty Mouse” is also equippedwith an integrated banding platform on theconnector shell, facilitating the terminationof braided shielding without the use of anaccessory backshell.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-5E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsEMC Materials and TechnologiesAthan 50 braiders, ranging from 16 to 96 carriers,provide the capability to produce large quantitiesof precise metal and non-metallic braid andexpandable sleeving in tubular, tapered, and flatconfigurations.SHIELDING EFFECTIVENESS (dB)SHIELDING EFFECTIVENESS (dB)1201101009080706050Shield Effectiveness Series 74 Tubingwith External Tin/Copper Braid – 1 Inch Diameter401 10 100 1 10 100kHzMHz1201101009080706050FREQUENCY (HERTZ)Shield Effectiveness Series 74 Tubingwith Two External Tin/Copper Braid – 1 Inch Diameter401 10 100 1 10 100kHzMHzFREQUENCY (HERTZ)An alternative to braided shielding, foilshields are made from aluminum laminated toa polyester or polypropylene film. Foil shieldsprovide 100 percent cable coverage, improvingprotection against radiated emission and ingressat audio and radio frequencies. Because of theirsmall size, foil shields are commonly used toshield individual pairs in multi-conductor cable toreduce crosstalk. Foil shields may also be bondedto a coaxial cable insulation or cable jacket with alayer of adhesive, allowing for faster, easier andmore reliable termination.Metal-Core Conduit Solutions forAdvanced EMC ApplicationsGlenair Series 75 Metal-Core Conduit isthe “Cadillac” of EMI shielding. Helically-woundmetal conduit provides extremely high levels ofEMI protection across all radiation fields andfrequencies. Metal-Core Conduit is the material ofchoice for TEMPEST secure communications andother applications involving sensitive electronicequipment and intense levels of EMI.Metal-core materials include brass, nickel/iron and stainless steel, generally specifiedwith one or more overbraids of bronze or platedcopper for additional pull-strength and strainreliefas well as with rubber jacketing. The choiceto use Metal-Core Conduit depends on thesensitivity of the equipment under considerationand other mechanical, thermal and environmentalrequirements.Shielding Effectiveness (dB)16015014013012011010090807060Series 75 Metal Core Brass Conduit with Neoprene Jacket1/2 inch Diameter501 10 100Frequency (MHz)Bronze Braid2 Tin/Copper Braids© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-6E-Mail: sales@glenair.com

Introduction to Filter ConnectorsEMC Materials and TechnologiesIntroductionSwing-Arm Shield Sock BackshellsThe selection of an appropriate shieldtermination backshell depends on many factors,including ease of assembly, cost, repairability,shield type and construction, cable diameterand type, cable jacket thickness, weight andcorrosion resistance. Often the choice boils downsimply to customer preference, although certainlyShielding Effectiveness (dB)120.00110.00100.0090.0080.0070.0060.0050.0040.00Swing-Arm Strain ReliefWith Nickel/Copper Braid Shielding-Size 163 Shielded Twisted Cables6 Shielded Twisted Cables30.000.1 1.0 10.0 100.0 1,000.0 10,000.0Frequency (MHz)cable construction, i.e., type of shielding andother mechanical factors is the most significanttechnical consideration.EMC. The composite thermoplastic Swing-Arm features an integrated EMI shield sock andconfigurable cable clamp—available with nickel/copper or metallized composite thermoplasticshielding. The articulating arm can be configuredto straight, 45° or 90° positions, reducing stockkeeping requirements. The Swing-Arm also offersextremely fast, simple and trouble-free shieldterminations.Conical Ring Style BackshellsGlenair EMI/RFI conical ring backshells providereliable individual and overall shield terminationby securing the shield under pressure between aconically shaped backshell and ground ring.Shielding Effectiveness (dB)14013012011010090Conical Ring Style BackshellsWith Strain ReliefLight Duty (380-007)Low Profile (380-001)Heavy Duty (380-005)801 10 100 1,000Frequency (MHz)AAs there is no single shield terminationtechnology or methodology that will meet everycustomer requirement, Glenair supports everypopular shield termination method with the fullrange of sizes and materials. Currently Glenairis able to produce an innovative backshellproduct, called the Swing-Arm that resolves asignificant number of design problems—includingGlenair Band-It ® Termination SystemThe unique low profile and smooth insidediameter of the Band-It ® steel clamping bandvirtually eliminates EMI leakage paths, providingreliable and repairable shield terminations.Cylindrical banding backshells are available for allMilitary Standard type connectors.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-7E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsEMI/EMP Filter Connector OverviewAEMI/EMP Filter Connector OverviewFiltering or suppression of electromagneticnoise within the connector package isreliably accomplished through the integrationof capacitors and diodes into the connector tosegregate interfering high-frequency or high voltagenoise from the desired lower frequency signals. Thecapacitors strip off the interfering noise from thesignal as it passes through the filter device. Whilevarious types of capacitor filters are available,perhaps the most widely applied is the PlanarArray type. Planar Arrays are extremely effectiveat filtering high-frequency interference. PlanarArray designs utilize ceramic capacitor arraysand ferrite inductors which externally surroundeach contact, and may be supplied in a singlemonolithic block to fit into any connector sizeor shape. Planar arrays may be fabricated withdifferent capacitive values on individual pins foradditional flexibility in achieving the desired levelof EMC. Diodes are used to clamp the voltagebelow a certain value, thereby protecting theelectronic circuity. They are typically integratedinto the connector using a small printed circuitboard.Ferrite elements and capacitors can be integrated intoany connector package envelope.Using filter technology has certainadvantages to the electrical system engineer,most especially improved signal integrity as wellas size and weight reduction. In addition, filterscan be incorporated into an interconnect systemlate in the research and development process; forexample after an unforeseen emission problemhas been detected. In every filter application thesignal levels and frequency bands must be wellunderstood in order to select the appropriatemode or type of filter technology.For example, electronic equipmentused by avionic systems typically spans theelectromagnetic spectrum from a few kilohertzto several gigahertz. At the low end, OmegaNavigation, which is used to fix aircraft positionwithin a network of ground based transmitters,operates in the frequency range of 10 to 14kHz. VHF Omnidirectional Range Finders(VOR) are radio beacons used in point-topointnavigation. They operate from 108 to 118MHz. Glideslope Systems used during landingsoperate in the 328 to 335 MHz range. Distance-Measuring Equipment (DME), which gauges thespace between the aircraft and ground-basedtransponders operate at just over 1 GHz.Clearly, potential EMI in the applicationenvironment described above covers a broadrange of frequencies. Filter modes and typesare consequently specified according to theEMI frequency ranges which are the source ofthe actual signal degradation and the operatingfrequency of the affected device. Certain electricalcircuit criteria are also germain to filter selection,including:n Capacitance Valuen Working Voltagen Surge Voltagen Dielectric Withstand Voltagen Insulation Resistancen Transient Protection© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-8E-Mail: sales@glenair.com

Introduction to Filter ConnectorsEMI/EMP Filter Connector OverviewIntroductionFilter connectors appropriate for use inapplications such as those referenced above arebroadly identified as ‘low-pass’ filters (i.e. they letlow frequency signals pass through and attenuatehigher frequencies). The attenuation curve canbe shaped using different filter types (differentconfigurations of capacitors and inductors).These types include: Pi Filter, L-C or C-L Filter,and C Filter. These filter connector types arecharacterized by their relative abilities to filternoise according to capacitance, voltage valuesand load impedances. The simplest design is the“C”, which consists of a single capacitor insertedbetween the signal line and ground.While most EMI filter connectors can be used ina working temperature environment from -55 to 125°C, selected designs are optimized for higher operatingtemperatures. Hermetic Filter connectors provide theultimate protection– ensuring system hermeticity whilethe added filter/diode elements safeguard electricalsignals passing through the connector.Prior to shipping a filtered connector, Glenairoffers extensive testing, qualification and burn-inoptions. Tests range from a simple capacitance (C),insulation resistance (IR), and dielectric withstandingvoltage (DWV), to more elaborate options suchas RF insertion loss, dissipation factor, Zener/TVSdiode test, ground resistance, voltage conditioningand thermal shock.The Glenair factory, provided with the systemattenuation and frequency values, relevant electricalspecifications, and connector configuration detailscan design an effective filter device for everyapplication (to get started, use the applicationchecklist on the last page of this introduction).Glenair is able to supply filter technology in everycylindrical connector standard we produce includingour Series 80 "Mighty Mouse" as well as MIL-C-38999, Mil-C-5015, MIL-DTL-83513, Mil-C-24308,and so on. Custom circular and rectangular stylesare also available. Hybrid electrical/optical filterconnectors are a specialty.ACOMMON FILTER CONNECTOR TYPESGlenair supplies filter connectors in the following electrical configurations: C, L-C, C-L, and Pi. The following general valuesmay be used in type selection: Single element filter connectors sporting either a single capacitor or inductor yield an insertion losscharacteristic of 20dB per decade, dual element filters (capacitor plus an inductor) 40dB per decade, and triple element filters 60dBper decade. Selection is based primarily on source and load impedances but may also be influenced by the level of attenuationrequired at various frequencies. Please consult the factory for assistance in evaluating insertion loss values. All insertion lossvalues quoted for a 50 Ohm impedance.C Circuit FilterSingle capacitor with low self inductance. This configuration is generally used toattenuate high frequency signals. The simple design allows high-frequency EMIto discharge to ground via the surrounding electromagnetic field.CL-C or C-L Circuit FilterSingle capacitor combined with an inductive element. It iscommonly used in a circuit with a both a low impedancesource and a high impedance load or a low impedance loadand a high impedance source. The inductive element shouldface the low impedance.L-CC-LPi Circuit FilterDual capacitors with a single inductive element positioned between them. The Pi filterprovides exceptional high-frequency performance due to its sharper rolloff and is typicallyused when both source and load impedances are high.Pi© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-9E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsMultilayer Ceramic Planar Capacitor ArraysAMultilayer Ceramic Planar Capacitor ArraysPlanar, multi-layer ceramic capacitive filtersoffer reduced size and improved performancecompared to discrete discoidal or tubularcapacitors. Planar array filter devices havethe advantage, especially when comparedto capacitive filters integrated at the circuitboard level, of being bidirectionally effective atattenuating unwanted noise travelling into and outof equipment enclosures.As mentioned above, the planar array canbe designed with different capacitive values onindividual pins, and pin groupings, and can alsobe selectively equipped with surge protectiondiodes. The ability to accommodate such TransientVoltage Suppressions (TVS) diodes to protectagainst voltage spikes from transient sourcessuch as EMP, lightning or Electrostatic Discharge(ESD) is an additional strength of the planar arraydesign. The planar array package can also easilyaccommodate ferrite elements to add inductanceto the filter device. For these reasons and more,the planar array is the most common filter typespecified in military aerospace and other highperformanceapplications.Multipin planar array filter device, assembled with itsferrite elements and connector contacts, ready forinsertion into the connector shell. The flexible designallows for different capacitive values on individual pinsas well as the integration of hybrid contacts such asoptical termini.The metal electrodes are plated on alternateceramic layers with a 'hot' or ground electrodeto match the contact pattern of the chosenconnecter. This results in a discrete capacitancevalue per hole—ultimately determining the EMIattenuation properties of the assembled filterdevice. After the layer-cake of dielectric materialsand conductive elements is assembled, it is firedat high temperature to create a unified, monolithicstructure.As the figure below illustrates, the planararray is fabricated such that the capacitorpositions align exactly to the pin layout positionsof the connector. When combined with inductiveferrite elements, TVS diodes or other specialcircuitry, the final assembly is ready for insertioninto the connector shell. The incorporation offilter elements into a standard cylindrical orrectangular connector will necessarily increasethe overall length of the package. The extra realestate is usually added to the inside-the-box (nonmating)side of the connector receptacle. Anotherapproach is to attach a connector adapter, orgo-between, outfitted with the filter device, to theconnector plug. This approach has the advantageof not requiring any dimensional changes in boxdesign or receptacle connector package.Typically, custom-configured planar arrays,with unique capacitive elements and values,are required to effectively address complex EMIproblems such as might be encountered in anavionics bay or in the body of a missile. For thisreason, planar array fabrication is accomplishedusing the most advanced CAD software and CNCmachine tools. As critical EMI problems are oftendiscovered late in the development process—perhaps only after equipment has been installedfor use—it is critical that turnaround times indesign and fabrication of custom designs are keptto a minimum. Glenair is committed to meetingthe most aggressive delivery requirements forplanar array type filter connectors.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-10E-Mail: sales@glenair.com

Introduction to Filter ConnectorsEMI Filters and Transient Voltage Suppression PackagingIntroductionEMI Filter and TransientVoltage Suppression PackagingAThe packaging of EMI and TVS elementsin standard connectors is an importantelement in effective EMC design. EMI/EMPconnectors typically come in Mil-Spec packagingfor easy intermating with Mil-Spec circular,D-sub, Micro-D and other standard formats. Suchconnectors are broadly identified as ‘low-pass’filters (i.e., they let low frequencysignals pass through andattenuate higher frequencies).The attenuation curve canbe shaped using differentfilter types (differentconfigurations ofcapacitors and inductors).While the exteriorof these very specialconnectors look normalenough, inside is anotherstory—a planar array madeof multiple layers of ceramicdielectric, separated by sheets ofceramic tape and screen printed with a patternof metal electrodes to create a capacitor usedto suppress or attenuate unwanted noise.Capacitance at each electrode protects againstEMI, while carefully placed transient voltagesuppression diodes guard against damage fromlightning strike and other voltage surges.Planar, multi-layer ceramic capacitive filtersoffer reduced size and improved performancecompared to discrete discoidal chips or tubularcapacitors. Planar array filter devices havethe advantage, especially when comparedto capacitive filters integrated at the circuitboard level, of being bidirectionally effective atattenuating unwanted noise travelling into and outof equipment enclosures.As critical EMI problems are often discoveredlate in the development process—perhaps onlyafter equipment has been installed for use—itis critical that turnaround times in design andfabrication of both standard and non-standarddesigns are kept to a minimum. Glenair iscommitted to meeting the most aggressivedelivery requirements for planar array type filterconnectors.Glenair’s Growing FilterConnector AvailabilityApplications requiring filteredconnectors generally call forspecific plating, mounting style,keying, shell size, contact layout,contact gender, termination, andfrequency filtration. Typically, thefiltered connector is either replacingan existing non-filtered receptacle,or it must mate with an existing cableplug. In some cases the filtering element is builtinto a connector go-between or saver. Whateverthe packaging requirement, Glenair is committedto a “no gaps” product availability model wherebywe can quickly build and ship any possible filterconnector configuration for industry standardconnector families such as MIL-DTL-38999,MIL-DTL-83513 and our own Series 80 “MightyMouse.”Shell SizeandContact CountCapacitanceCodes9 A, B, D, F15 A, D21 A, C, D25 B, D, F31 D37 B, D, F© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-11E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsEMI Filters and Transient Voltage Suppression PackagingAWe currently stock some finished filteredconnector parts in our Same Day inventory,and we will continue to add to this stock. Moreimportantly, we have placed into inventory a widerange of the longest lead time component—ceramic planar filter arrays—in the most popularcapacitance values. This filter array stockingprogram enables Glenair to provide the industry’sfastest delivery of finished filtered connectors.In addition, we now have built the in-housecapability to manufacture our own ceramic planarcapacitor arrays. This vertical integration will allowus to continue to add to component stock andreduce lead times even further.Listed below are the current filteredconnector families available for the fastestdelivery in the industry. For any capacitor arraycode listed, we can accommodate both C-Sectionand Pi-Section capacitance values.Shell SizeLayoutContact Count andSizeCapacitorArray Codes11-35 13 #22D B13-35 22 #22D D, E, F15-35 37 #22D E, X17-8 8 #16 A17-35 55 #22D D, E, F21-35 79 #22D G23-21 21 #16 X23-35 100 #22D G25-29 29 #16 D25-35 128 #22 D25-43 20 #16, 23#20 CMIL-DTL-38999 series I, II, III, and IVconnectors in any plug or receptacle style, alongwith any material, plating, or filtration in the sizeand contact layouts with the capacitor codeslisted below. These listed filter arrays make morethan 142,000 D38999 finished parts. And moreD38999 filter array layouts are being added tostock every day!Shell SizeContact Count andSizeCapacitanceCodes5 3 #23 A6 4 #23 A, D6 7 #23 A, D7 10 #23 A, D8 13 #23 D9 19 #23 A10 26 #23 A, D13 37 #23 A16 55 #23 A17 85 #23 A“Mighty Mouse” Series 801, 804, and 805in plug or any receptacle style, material, plating,or filtration are available in the size and contactlayouts with the capacitor codes listed above.These listed filter arrays can make more than29,000 “Mighty Mouse” finished parts and more“Mighty Mouse” filter array layouts are beingadded to stock every day!Micro-D Connectors in Solder Cup, Pre-Wired Pigtails, Vertical Printed Circuit Boards,Right Angle Printed Circuit Boards and In-LineAdapters in any material, plating, or filtration areavailable in the size and contact counts with thecapacitor codes listed below. These listed filterarrays can make almost 35,000 Micro-D finishedparts (along with an essentially infinite numberof pigtail Micro-D part numbers pre-wired to anylength). Again, more Micro-D filter array layoutsare being added to stock every day!In addition to standard catalog products,Glenair filter connector designs may becustomized for use in a wide range of applicationenvironments including avionic systems,down-hole drilling and logging devices, navaland marine platforms, network-centric groundwarfare systems, and missile and satellite/spaceapplications. Please call the factory or visit ourwebsite for more information.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-12E-Mail: sales@glenair.com

Introduction to Filter ConnectorsEMI Filters and Transient Voltage Suppression PackagingIntroductionEMP and TVS DefinedElectromagnetic Pulse (EMP) refers to theintense radio frequency pulses produced by nuclearexplosions at high altitudes. Other names for thisinclude Nuclear EMP (NEMP) and High-AltitudeEMP (HEMP). Similarly, System Generated EMP(SGEMP) refers to electrical noise resultant fromlarge amounts of composite skin used in satellites,aircraft and helicopters that discharge over time.Like other forms of electromagnetic interference,EMP can have a destructive effect on sensitiveelectronic devices, particularly those used inmission-critical military applications. This occursif and when the EMP couples to an antenna oran unshielded cable and passes unmolested intoan electronic device. EMP hardened equipmentis designed to protect vital communications at atime when unhardened devices are likely to fail.Thus it is a standard requirement for many militaryapplications to proactively protect certain devicesfrom EMP via the integration of Transient VoltageSuppression technologies into the connectors thatservice the device.Transient Voltage Suppression (TVS)technologies are designed to shunt voltagetransients directly to ground before such surges candamage sensitive electronic equipment. IndividualTVS diodes as well as diode modules may beincorporated directly into the filter connector packageto provide optimal protection for either individualcontacts or groups of contacts without significantincreases in connector size or weight. Individualcircuit protection diodes and diode modules areavailable for all connector types and are routinelystocked by Glenair to reduce lead-times. Fieldmaintenance and repair of damaged diodes isalso possible as both individual diodes and diodemodules are easily removed from the connectorpackage. RTCA DO-160 and other electricalperformance standards now define acceptablebenchmarks for withstanding electromagnetic pulse,lightning strike, or other induced voltage surges.Glenair designs all TVS equipped filter connectors toconform to the RTCA DO-160 standard.Hermetic PackagingHermetic connectors are specified forapplications as divergent as submarines andorbiting satellites. They are deployed to resistmoisture ingress in underground applicationsand to withstand pressure differentials invacuum chambers, laboratory equipment andcommercial and military aircraft. Hermeticconnectors, such as the MIL-DTL-38999 SeriesI, II, III and IV supplied by Glenair, are principallydesigned for use in military aerospace—in fact,the requirement for connector hermeticity wasoriginally driven by military electronic applications.But the products are equally at home incommercial applications such as oil-patch loggingequipment or medical devices.Hermetic connectors are constructed from acore component-set that includes the connectorshell, a vitreous glass insert and the selectedcontacts. Shells may be machined from stainlesssteel or Kovar®, an iron-nickel-cobalt alloy witha co-efficient of expansion closely balanced tothe glass inserts. Contacts used in hermeticconnectors must be fabricated from high-gradeiron/nickel materials that can withstand high-heat,and bond effectively to the vitreous glass seal.As with other connector families, hermeticcustomers may specify the connector couplingstyle (threaded, bayonet, etc.), pin or socketgender and layout, contact termination type(solder cup or PCB termination), conductive ornon-conductive finish, polarization and so on.Glenair’s complete in-house hermetic capabilityaffords us the ability to produce a wide-range ofspecial purpose hermetic connectors designedto meet individual and unique customerspecifications—such as EMI/EMP filtering.Hermetic class EMI/EMP filter connectorsare available throughout our complete range offiltered connector products in both Pi and C from400 pF to 56000 pF. Connector platings andmaterials are offered in class H2 (stainless steel,electroless nickel).A© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-13E-Mail: sales@glenair.com

Transient Voltage SuppressionDesigners must protect systems from transientover-voltages as a result of nearby lightning strikes.Placing transient suppression diodes within thesystem—preferably inside a connector instead of somead hoc location—is one of the most effective ways toprotect electronic systems from lightning strikes andother sources of electromagnetic pulse.Diodes work something like a pressure valve on a homewater heater—if the pressure within the chamber exceedsa certain value, the valve opens, allowing steam and liquidto escape. Similarly, diodes in electronic systems protectcomponents within the circuit by shorting to groundtransient spikes that exceed the diode’s clamp voltage.

Workshop with Serge GigawattWhen specifying transient voltagesuppression for a given lightningstrike waveform (or “shape”) andlevel (or magnitude), diodes must becompatible with EMI filter dielectricwithstanding voltage (DWV) rating.Diode power is rated in wattsfor a given pulse shape and pulseduration. Typically the referencevalues are given for a 10/1000μspulse. This means that the diodecan absorb the peak power ratedfor a pulse with 10μs rise time and1000μs fall time. If the systemis subjected to a different pulseshape or duration the value must beadjusted accordingly. The table onthe following page does just thatfor RTCA D0/60 lightning strike.For high speed applications, diode capacitance andtrace inductance are critical. Glenair engineers will recommenda suitable design for each application. This mayinvolve using extremely compact surface mount diodeswithin the pin field of the connector, as shown below.Since lightning strikes can be positively ornegatively charged, special bi-directional diodesare available. If a system does not already havetransient suppression diodes somewhere “in the box,”Glenair can include diodes on EMI filtered or nonfilteredconnectors.

IntroductionIntroduction to Filter ConnectorsTransient Voltage SuppressionDiode Selection GuideADO 160 WaveformDiode Power Selection for Lightning Strike Waveform ThreatsLevelOpen Circuit Voltage/Short Circuit CurrentV/ADiode PeakVoltage (Vwm)Diode ClampVoltage (Vc)RecommendedDiode Power(Watts)1 MHz DampedRinging Sine3Double Exponential6.4 x 70 μsec4Double Exponential40 x 120 μsec5A1 100/4 5 to 60 9.2 to 96.8 6002 250/10 5 to 150 9.2 to 243 6003 600/24 5 to 170 9.2 to 275 6005 to 54 9.2 to 87.1 6004 1500/6058 to 150 93.6 to 243 1500160 to 170 259 to 275 30005 to 22 9.2 to 35.5 6005 3200/12824 to 60 38.9 to 96.8 150064 to 130 103 to 209 3000150 to 170 243 to 275 50001 50/10 5 to 30 9.2 to 48.4 6002 125/25 5 to 75 9.2 to 121 6005 to 17 9.2 to 27.6 6003 300/6018 to 26 29.2 to 42.1 300028 to 110 45.4 to 177 5000120 to 170 193 to 275 150005 to 8.5 9.2 to 14.4 30004 750/1509 to 60 15.4 to 96.8 500064 to 170 103 to 275 150005 to 24 9.2 to 38.9 50005 1600/32026 to 78 42.1 to 126 1500090 147 300001 50/50 5 to 30 9.2 to 48.4 15002 125/125 5 to 75 9.2 to 121 30005 to 15 9.2 to 24.4 30003 300/30017 to 170 26.7 to 275 15000180 291 300004 750/75017 to 22 26.7 to 35.5 1500030 to 48 55.2 to 77.4 300005 1600/1600 None© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-16E-Mail: sales@glenair.com

Introduction to Filter ConnectorsTransient Voltage SuppressionDiode Selection GuideIntroductionTables for the selection of diodes and recommended DWV for a specifi ed waveformvoltage threat.1. Determine the specifi cation threat waveform and level.2. Determine the maximum clamping voltage that the system can tolerate(this may be a different value for each pin of the connector).3. Move down the table to the waveform and Voc/Isc (Open Circuit Voltage/Short Circuit Current) that is covered in the specifi cation.4. Move across the table left to right and select the recommended diode powerlevel.5. If the application is a high frequency data line, a low capacitance diode will be needed. There is nodifference in the power rating.6. High speed data lines, Ethernet or USB, cannot tolerate much capacitance at all. These will need aspecial diode and no fi lter can be used.7. If a fi lter is to be used in the application, consult EMI Filter Rating table (below) to determine theminimum DWV voltage needed to protect the selected fi lter capacitance.8. The fi lter DWV rating applies with or without a diode.AEMI Filter Rating in Dielectric Withstanding Voltage (DWV)For Compatibility with Transient Suppressing DiodesDO 160WaveformLevelWaveform(Voc)Capacitance pF Minimum19000 16000 9000 4000 1650 400 2001 MHzDampedRinging Sine3DoubleExponential6.4 x70 μsec4DoubleExponential40 x 120 μsec5A1 100▼ Recommended Dielectric Withstanding Voltage ▼500 500 500 500 500 500 5002 250 500 500 500 500 500 500 5003 600 500 500 500 670 720 720 7204 1500 740 840 1210 1660 1800 1800 18005 3200 1580 1790 2580 3530 3840 3840 38401 50 500 500 500 500 500 500 5002 125 500 500 500 500 500 500 5003 300 500 500 500 500 500 500 5004 750 820 850 900 900 900 900 9005 1600 1920 1920 1920 1920 1920 1920 19201 50 500 500 500 500 500 500 5002 125 500 500 500 500 500 500 5003 300 500 500 500 500 500 500 5004 750 900 900 900 900 900 900 9005 1600 1920 1920 1920 1920 1920 1920 1920© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-17E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsInsertion Loss and Capacitance ValuesACINSERTION LOSSInsertion Loss, dB Minimum, 25°CFrequency X Y Z A B C D E F G J1 MHz 22 16 13 6 5 3 –– –– –– –– ––10 MHz 41 36 33 24 23 16 8 4 –– –– ––100 MHz 56 53 52 41 39 35 28 21 10 5 1500-1000 MHz 60 57 57 50 49 46 41 34 23 17 8CAPACITANCEFilter Class Capacitance Min fc (MHz)X 80000 - 120000 [pF] *Y 40000 - 60000 [pF] *Z 30000 - 45000 [pF] *A 19000 - 28000 [pF] *B 16000 - 22500 [pF] *C 9000 - 16500 [pF] *D 4000 - 6000 [pF] *E 1650 - 2500 [pF] *F 400 - 650 [pF] *G 200 - 300 [pF] *J 35 - 60 [pF] **Consult Factory for Minimum Cutoff FrequencyPiINSERTION LOSSInsertion Loss, dB Minimum, 25°CFrequency X Y Z A B C D E F G J1 MHz 23 19 17 10 8 5 1 –– –– –– ––10 MHz 70 55 52 40 35 25 14 8 2 0.8 ––100 MHz 75+ 75+ 75+ 62 60 57 50 40 15 13 4500-1000 MHz 75+ 75+ 75+ 66 62 60 58 52 32 22 15CAPACITANCEFilter Class Capacitance Min fc (MHz)X 160000 – 240000 [pF] *Y 80000 – 120000 [pF] *Z 60000 – 90000 [pF] *A 38000 – 56000 [pF] *B 32000 – 45000 [pF] *C 18000 – 33000 [pF] *D 8000 – 12000 [pF] *E 3300 – 5000 [pF] *F 800 – 1300 [pF] *G 400 - 600 [pF] *J 70-120 [pF] **Consult Factory for Minimum Cutoff FrequencyAPPLICATION NOTES1. Standard voltage rating is 500 VDC DWV.2. Insertion loss values quoted are for 50Ω impedance and no load condition.3. Classes X, Y and Z are 250 VDC DWV. Consult factory for additional information.4. Some shell configurations may require extra length for classes X, Y and Z.5. Other configurations available. Consult factory.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-18E-Mail: sales@glenair.com

Introduction to Filter ConnectorsInsertion Loss Evaluation and Connector CustomizationIntroductionInsertion Loss EvaluationInsertion loss is an important specificationto consider in the selection of filter connectors.Insertion loss is a measure of the degradationexperienced by a signal when a device, such as aconnector, is inserted into the transmission path.When a filter element performs its job ofstripping signal noise from a transmission line,it may attenuate a portion of the desired signalas well. Measured in decibels (dB), insertionloss should be minimized in sensitive electronicsystems which may operate at extremely lowcurrent levels. Typically, some amount of insertionloss is considered acceptable to accomplish thenecessary signal selectivity, since the signal canalways be re-amplified post-filtering. However, inmany applications, too large a loss may ultimatelyresult in the unacceptable degradation of systemperformance.The evaluation of insertion loss is performedover a specific frequency range—i.e. a spectrumthat extends from one limiting frequency toanother. The intent being to measure signaldegradation for each filter type across the actualoperating frequencies of the equipment underconsideration. Note that each filter type may yielddifferent (theoretical and actual) insertion lossvalues depending on the specific capacitanceand inductance [pF] ratings of the filter elements.Effective EMI/EMP filtering is, therefore, abalance between the purposeful attenuation ofsignal noise and the unfortunate degradationof signal strength—both conditions directlyattributable to the insertion of the filter device intothe system. Sensible EMC design should, as aconsequence, always incorporate conventionalgrounding and shielding of interconnect cablingand equipment housings in anticipation ofunexpected EMI problems. The tables on theopposite page explain predictable insertionloss [dB] for each filter type (C, L, and Pi), atthe available capacitance ratings [pF] across acommon frequency range [MHz].Custom Options in Filtered ConnectorsGlenair filter connector designs may beoptimized for use in a wide range of applicationenvironments including avionic systems,down-hole drilling and logging devices, navaland marine platforms, network-centric groundwarfare systems, and missile and satellite/spaceapplications. Common electrical customizationsinclude unique capacitance values on individuallines, electrostatic discharge designs, transientvoltage suppression diodes, grounded holes andfeed-throughs, as well as the incorporation ofcustomer-specified filter architectures includingPi, C, L-C, C-L and T configurations.Mechanical packaging options in EMI/EMPfilter connectors include:n Hybrid Fiber Optic/Electrical Contactsn Hermetic Sealingn Dual-Flange PCB Mount Designsn Composite Thermoplastic Shell Materialsn Variable Length PCB Tailsn Piggy-Back Crimp Contactsn EMI Grounding Fingers and Gasketsn In-Line, Feed-Through, Plug and OtherShell StylesCustom dual plan Micro-D filter connector with EMIgasket and right angle PCB mounting. Glenair canapply a broad range of custom shell configurations,filter values, TVS technologies—even hybrid fiber opticcontacts—into any standard connector package.A© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-19E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsSpace Grade Applications, Soldering and Lightning StrikeASpace Grade ApplicationsNonmetallic materials such as rubber, plastic,adhesives and potting compounds can give offgasses when subjected to a vacuum or high heat.For space grade applications, Glenair is able tooffer both both an 8 hour 400° bakeout processas well as a 24 hour 125° thermal vacuumoutgassing process to insure our filter connectorproducts do not give off gaseous moleculesthat might harm sensitive optical or electronicequipment.The space industy has adopted astandardized test procedure, ASTM E 595, toevaluate outgassing properties of products thatcontain polymer materials. In the ASTM test,material samples are heated to 125° C at avacuum of 5 X 10 -5 torr for 24 hours. The testsample is then weighed to calculate the TotalMass Loss (TML), which may not exceed 1.00%of the total initial mass. Likewise the quantity ofoutgassed matter is weighed to determine theCollected Volitile Condensable Material (CVCM),which may not exceed 0.10% of the originalspecimen mass.Glenair routinely performs both bakeoutand thermal vacuum outgassing procedures onconnector products that must conform to NASAscreening or other outgassing standards. Ourexperience has been that the simpler bakeoutprocess is more than adequate to meet the ASTME 595 benchmark of 1.00% TML and 0.10%CVCM. Glenair is well versed in supplying filterconnector products that are optimized for use inspace grade applications, and we supply filterconnectors compliant to EEE-INST-002, Table2G, the recognized standard for spacegrade filterconnectors.SolderingOur filter connector engineers are frequentlyasked about any special handling proceduresthat are required when soldering PC Tail andSolder-cup contacts. At issue is the potential todamage filter elements due to the high heat ofthe soldering process. The short answer is thatany trained and qualified operator can completethe operation without any special precautions.While it certainly can't hurt to take some basicprecations such as preheating the connector orutilizing a heat sink on individual contacts, ourtests have revealed that, under normal conditions,the temperature of the ceramic filter array is notradically raised during solder termination of thecontacts. Even in tests where we used a solderiron temperature of 350°C and an extremely long‘touch time’ of 90 seconds, no adverse effectswere observed. In fact, temperature at theceramic remained well below 100°C at all times.While special precautions are not requiredfor soldering, filter connectors should be cleanedonly in a mated condition. Use a metal protectivecover to protect the filter connector's sensitivecomponents from cleaning fluid. In addition, limitbakeout temperatures to +125 C.Composite Connectors and Lightning StrikeComposite thermoplastic materials, such asthe 30% glass filled polyetherimide (PEI) used inGlenair's MIL-DTL-38999 Series III Wall MountReceptacle Connector (240-011) have beentested for mechanical and electrical survivabilityto direct and indirect lightning strike. At issue isthe ability of the composite connector shell tomaintain its electrical continuity in the event ofan intense voltage surge resulting from lightningstrike.In testing in accordance with MIL-STD-1344,items are subjected to waveform 1 and 5B usinga high current generator. Items must remainfunctional without degredation of the unit'selectrical performance, including filtering elementsand TVS diodes and modules. Waveform 1 and5B are applied starting at 3kA increasing to 20kAchecking continuity measurments at set intervals.Waveform 1 is additionally subjected to anoscillatory wave starting at 30kA and increasing in10kA steps until failure in continuity is measured.While larger composite connector shell sizes(12 to 24) conform to MIL-STD-1344, smallersizes (8 and 10) fail the test. Customers shouldselect alternative materials, aluminum or stainlesssteel, when specifying small connector shell sizesin applications subject to lightning strike.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-20E-Mail: sales@glenair.com

Introduction to Filter ConnectorsEMI/EMP GlossaryIntroductionAbsorption Loss: That part of shielding effectivenessdealing with energy absorption through a metal barrier.Attenuation: Reduction in the quality or magnitude ofan electrical signal. Suppression of EMI noise in theinterconnect transmission path.Aperture Leakage: Compromise in shieldingeffectiveness from holes, slits, and slots from braid,windows, cooling openings, and joints of metal boxeswhere EMI can get in or out.Bandwidth: The frequency interval between the upperand lower 3 dB down response of a receiver.Broadband EMI: Electrical disturbances whosefrequency spectrum cover several octaves or decadesin the frequency spectrum or exceed the receiverbandwidth.Capacitance: The measure or ability of a multilayerceramic planar array to capture and store electricalenergy.Common Mode (CM): As applied to two or morewires, all currents flowing therein with the samepolarity .Conducted Interference: EMI transmitted along anunshielded conductor or cable.Coupling Path: The conducted or radiated path bywhich interfering energy gets from a source to avictim.Cross Modulation: Energy from one transmitter thatcauses the modulation to change on a received signalfrom another transmitter.Crosstalk: Electromagnetic energy bleed acrossdielectric materials, for example, in twisted pair cablesets or across adjacent connector contacts, disruptingthe electrical signals in each respective circuit.Differential Mode (DM): Voltages or currents on awire pair that are of opposite polarity.Dielectric Withstanding Voltage (DWV): Rating,expressed in volts at a given frequency at ambienttemperature defining the maximum voltage a dielectricmaterial can withstand before failing.Drain: path by which charges absorbed by a conductormove to ground in a properly grounded system.Electric Field: A radiated wave’s potential gradient involts per meter (V/m).Electrical Gasket: A compressible bond used betweentwo mating metal members to secure a low-impedancepath between them.EMC: Electromagnetic compatibility, the conditionsunder which all components of a system do notinterfere with each other or with their environment.EMI: Electromagnetic interference (opposite ofEMC). Electromagnetic disturbance that degradesperformance of electronic equipment.EMP: Electromagnetic pulse. A broadband, highintensity,short-duration burst of electromagneticenergy such as might occur as a result of a nuclearexplosion.ESD: Electrostatic discharge. A momentary (andunwanted) discharge of built-up electrical energy,usually from an electrically insulated object to anobject with a different electrical potential.Emission: Unwanted electromagnetic signal emanatingfrom a piece of equipment.Ferrite: Powdered magnetic material in form of beads,rods, and rings used to absorb EMI on wires andcables.Field Strength: Radiated voltage or current per metercorresponding to electric or magnetic fields.Filter: A device to block the flow of EMI whilepassing the desired signal frequencies.Grounding: A conductive path to earth designed toeliminate electrical shock by shunting away dangerouscurrents.Impulse Noise: A transient electrical disturbance,usually repetitive.Inductors: Used with capacitors to form tuned circuitsto filter out specific signal frequencies.Magnetic Field: A radiated wave’s current gradient,expressed in amperes per meter (A/m).Multilayer Planar Array: Multi-layer ceramic EMIfilter device housed in a connector. The most widelyapplied type of EMI filter.Narrowband : EMI Interference whose emissionbandwidth is less than the bandwidth of the EMImeasuring receiver or spectrum analyzer.A© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-21E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsEMI/EMP GlossaryAPower Conditioning: Reduction of EMI pollution onpower mains by inserting filters, isolators, regulators,or an uninterruptible power supply (UPS).Radiated Interference: EMI or noise transmitted fromany electrical system, from power-lines to mobiletelephones.Radio Frequency Interference (RFI): A specialclass of electromagnetic interference in which radiofrequency transmissions cause unintentional problemsin equipment operation.Reflection Loss: Shielding effectiveness due to energyreflection from impedance mismatch between incidentfield and metal barrier.Roll-Off: The frequency in an attenuation curve atwhich a filter begins to reduce the quality or magnitudeof an electrical signal.Shielding Effectiveness (SE): The ratio of fieldstrengths (absorption and reflection losses) before andafter installing a shield.Shot Noise: The noise caused by random fluctuationsin the motion of charge carriers such as electrons in aconductor.Skin Depth: The calculated metal layer thicknessthrough which some 63 percent of the surface currentflows.Surge: A sudden voltage increase on the power mains.TEMPEST: Transient Electromagnetic PulseSurveillance Technology.Transfer Impedance (Z t ): The quality of cable shieldperformance calculated by the ratio of the coupledvoltage to the surface current, in ohms per meter(Ω/m).Transient: A short-duration voltage surge due to alightning strike or other dynamic event.UPS: Uninterruptible power supply.Waveform: For lightning events, measure of electricaltransient exposure level and surge severity.Filter Module ElementsMultilayerCeramic PlanarArray: Containinga network ofcapacitors,feedthrus andground lines.•••Contact Types:Choose from SolderCup, PC Tail or Piggy-Back Crimp (ConsultFactory for PC TailLength Options).•Contact Material:Gold PlatedCopper Alloy.Inductors:Ferrite Beads toprovide inductanceand increaseinsertion loss••Pin/Hole Intersection:The business-end of the filter,providing each contact withits capacitance value andgrounding.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-22E-Mail: sales@glenair.com

Introduction to Filter ConnectorsRoHS Compliance andPreference for Domestic Specialty Metals StatementIntroductionGlenair Statement on RoHS ComplianceEuropean Union Directive 2002/95/EC on Restriction of the use of certain Hazardous Substances (“RoHS”)states that certain types of OEM equipment (primarily consumer electronic products such as personalcomputers) shall not contain lead, mercury, cadmium, hexavalent chromium, PBB’s or PBDE’s. For the record,Glenair does not produce any OEM products of this type. Furthermore, our interconnect components are eitherfree of the substances RoHS controls, or specifically intended for use in military-aerospace applications thatare exempt. Accordingly, Glenair will continue to offer cadmium and chromate finishes in accordance with DoDand aerospace specifications and as required by these customers. Makers of consumer products should referto RoHS guidelines to insure interconnect components are correctly specified when used in in RoHS regulatedelectronic equipment. Consumer product manufacturers may also refer to the following table to insure anyproducts they may specify from this catalog are equipped with RoHS compliant materials and finishes. Goingforward, Glenair will gladly employ substitutes to current military-aerospace materials and finishes as they areproven reliable and as military standards permit.Aconnector and backshell plating:rohs compliancePlating TypeCadmium with yellow or olive drabchromate conversion coating overelectroless nickelElectroless nickelStainless steel shell, passivatedRoHSComplianceNoRoHS-CompliantRoHS-Compliant/ EG2002 / 95/ EG2002 / 95NotesElectroless nickel is the preferred alternate.First choice for RoHS compliance. Good corrosionresistance, excellent conductivity, M83513 approved,always in stock.Higher cost but unsurpassed corrosion resistance, notconductive enough for typical EMI needs. Build-to-order.Gold over aluminumNi-PTFE 1000 Hour Grey TMNickel Fluorocarbon PolymerRoHS-CompliantRoHS-Compliant/ EG2002 / 95/ EG2002 / 95Low volume, higher cost, excellent conductivity. Build-toorder.Conductive, CAD-Free, 1000 hr. salt spray plating offersoutstanding corrosion protection. MIL-DTL-38999 Rev. LChem film No Electroless nickel is the preferred alternate.Preferance for Domestic Specialty Metals StatementFor parts we make and sell, we comply with the Preference for Domestic Specialty Metals requirements(as modified by Alternate 1, Deviation 20008-00002) that, additionally, are required to meet US MilitarySpecifications, Federal Specifications, or ASTM (or other industry) Specifications. Vendors certify (andare audited) to adherence with these requirements with each purchase order fulfilled. Glenair parts arein compliance with DFARS 252.225-7014, Alternate 1, Deviation 20008-00002, "Preference for DomesticSpecialty Metals."© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-23E-Mail: sales@glenair.com

IntroductionIntroduction to Filter ConnectorsDiode Burn-In ServicesAGlenair Diode Burn-In Services:Fast, Reliable and ComprehensiveIn addition to complete system design for EMI/RFI filtering applications and transient overvoltagesuppression, Glenair offers in-househigh temperature reverse bias (HTRB) diodeburn-in services—a screening process designedto ensure Transient Voltage Suppressiondiode reliability. The reliability of TVSdevices is of extreme importancedue to the mission-critical role TVSprotected electronic equipment playsin aerospace, communications,command and control systems.Failure of a diode is generallyattributed to a physical defect in thepart. Diode failure modes can includethermal fatigue, contact migration andother factors which can contributeto a short-circuit mode. Industrystandardqualification tests havebeen developed with stresslevels matched to applicationrequirements. The HTRB test is used to monitoroff-state leakage currents to reveal any failuremodes prior to final assembly. In general,semiconductor manufacturers can take weeks todeliver tested diodes, whereas Glenaircurrently takes only days. Ourtest lab has the capabilities totest surface mount or leadeddiodes. Leakage current ismonitored throughout theburn-in process. Other labsmay just take readings onlybefore and after cycling,potentially missing weakdiodes that could fail in thefield. Glenair takes and recordsmultiple reading throughout theburn-in process to ensure highestreliability of HTRB services. For thisreason, you can count on Glenair for unparalleleddiode reliability testing.Glenair’s state-of-the-artdiode burn in process testsleaded and surface mountdiodes with leakage currentmonitored throughoutthe entire test procedure,ensuring field reliability.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-24E-Mail: sales@glenair.com

Military Standard TypeCircular Filtered ConnectorsMIL-DTL-38999, MIL-DTL-26482, and MIL-DTL-83723MIL-DTL-38999ConnectorsPRODUCT FEATURESAll Filter Connector Styles Meet or Exceed ApplicableMilitary StandardsC and Pi Circuit Filters from 400 pF to 240,000 pFAll Connector Series are Intermateable with Standard(Non-Filtered) Plugs and Connector AdaptersBroadest Range of Insert Arrangements forMIL-DTL-38999 Series I, II, III and IVPC Tail, Solder Cup and Crimp-Contact VersionsSpace-Grade Bake-Out Processing AvailableTransient Voltage Suppression Diodes AvailableBThe Industry's Best Short Lead-Time Source for PlanarArray Type EMI/EMP Filter ConnectorsMilitary Standard Type SeriesGlenair's family of circular military standard type EMI/EMP filter connectors is designed to meetstringent military/aerospace performance requirements. Each connector series is offered withstandard low-pass Pi or C filter arrays, or with customized filters to meet specific frequencyand capacitance requirements. Thermally conductive epoxy protects the filter package frommechanical and heat stress and also provides a waterproof seal. All filtered receptaclesare intermateable with standard plugs and connector savers, and each respective seriesof connectors is supplied with a range of shell styles in both environmental and hermeticconfigurations. Please see the "How to Order" page for available styles for each series:MIL-DTL-38999 Series I...........................B-2MIL-DTL-38999 Series II.........................B-12MIL-DTL-38999 Series III........................B-20MIL-DTL-38999 Series IV.....................B-38MIL-DTL-26482 Series II.........................B-44MIL-DTL-83723...................................B-52MATERIAL AND FINISHESContactsInsulatorInterfacial Seal, O-Ring, and Peripheral SealShell, Jam Nut MaterialShell and Jam Nut FinishPotting CompoundBeryllium Copper Alloy, 50 µ Inch Gold Plated per ASTM B488 Type 3, Code C, Class 1,27 over Nickel Underplate perQQ-N-290 Class 2. Socket Contact Hood: Corrosion Resistant Steel, Passivated.Liquid Crystal Polymer (LCP) per MIL-M-24519 GLP-30F, 30% Glass-FilledFlourosilicone Elastomer per A-A-59588, Color BlueAluminum Alloy per ASTM B 211 or ASTM B 221or Corrosion Resistant Steel per AMS-QQ-S-763Code M: Electroless Nickel per AMS-C-26074 (96 Hour Salt Spray)Code NF: Olive Drab Cadmium per AMS-QQ-P-416 over Electroless Nickel (500 Hour Salt Spray)Code P: Stainless Steel with Electro-Deposited NickelCode MT: Ni-PTFE 1000 Hour Grey TM (Nickel Fluorcarbon Polymer) per MIL-DTL-38999 Rev. LThermally Conductive Epoxy© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-1E-Mail: sales@glenair.com

MIL-DTL-38999ConnectorsGlenair MIL-DTL-38999 Series I TypeScoop-Proof Filter Connector with Bayonet CouplingMaster How to Order • Part Number BreakdownMIL-DTL-38999Series IInsert ArrangementPer MIL-STD-1560Capacitance(See Table II)BFilterConnectorProductCodeConnectorClass(See Table I)Termination*S - Solder CupP - PC TailC - Crimp***Omit for Connector Adapter.**Crimp Option applies to shellstyle R only.Alternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalU = Universal(Connector Adapters Only)240 - 381 J M 15-35 P S P A C NShell StyleW - Wall MountR - Crimp Removable Wall MountJ - Jam NutA - Connector AdapterContact GenderP - PinS - SocketPS - Conn. Adapter(Pins, Plug Side)SP - Conn. Adapter(Sockets, Plug Side)Flange Mounting StyleN - Not Applicable/Mfgs. OptionH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)Filter TypeP - Pi CircuitC - C CircuitConsult Factory for AdditionalFilter Types, TVS Diodes,and other Custom FilterConnector Configurations.TABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-2E-Mail: sales@glenair.com

Glenair MIL-DTL-38999 Series I TypeScoop-Proof Filter Connector with Bayonet CouplingReference InformationMIL-DTL-38999ConnectorsN4xM Holes.005 (.13)NHJ FlatBFront PanelMountingShellSizeCodeMIL-DTL-38999 Series ISquare Flange Panel CutoutsShellSizeK MinA 09 .656 (16.7)B 11 .796 (20.2)C 13 .922 (23.4)D 15 1.047 (26.6)E 17 1.219 (31.0)F 19 1.297 (32.9)G 21 1.422 (36.1)H 23 1.547 (39.3)J 25 1.672 (42.5)K Min L Min M Holes N BSC.516(13.1).625(15.9).750(19.1).906(23.0)1.016(25.8)1.141(29.0)1.266(32.2)1.375(34.9)1.484(37.7)Back PanelMounting.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).155 (3.9).145 (3.7).719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9)1.500(38.1)L MinSHELLSIZECODEMIL-DTL-38999 Series IJam Nut Panel CutoutSHELLSIZEA 09B 11C 13D 15E 17F 19G 21H 23J 25H.710 (18.0).700 (17.8).835 (21.2).825 (21.0)1.020 (25.9)1.010 (25.7)1.145 (29.1)1.135 (28.8)1.270 (32.3)1.260 (32.0)1.395 (35.4)1.385 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.770 (45.0)1.760 (44.7)J.670 (17.0).660 (16.8).771 (19.6).761 (19.3).955 (24.3).945 (24.0)1.085 (27.6)1.075 (27.3)1.210 (30.7)1.200 (30.5)1.335 (33.9)1.325 (33.7)1.460 (37.1)1.450 (36.8)1.585 (40.3)1.575 (40.0)1.710 (43.4)1.700 (43.2)APPLICATION NOTES1. Materials/Finishes: Shells, Barrel, Coupling Nut, Jam Nut - See Table IInsulators - high grade rigid dielectric/N.A.Seals - FlourosiliconePC Tail & Solder Cup contacts: 50μ" Gold over 50μ" Nickel2. Assembly to be identified with Glenair's name, part number, and datecode - space permitting.3. Insert Arrangement in accordance with MIL-STD-1560.(Arrangement shown for reference only)4. EMI Circular Filter Receptacle connector designed to meet requirements ofMIL-STD-2120 and MIL-DTL-38999, Series I.5. All contacts to have identical filter value. Other filter arrangementsavailable, contact factory.6. Electrical Ratings: DWV- 500 VDC Min.; Standard OperatingVoltage 200 Volts DC; Current Rating 5 Amps (size 22);7. Insulation Resistance: 5000 MegOhms Min. at 200 VDC.8. Operating Temperature -55°C to +125°C (Env Class Connectors)9. Other filter styles (C-L, L-C, Unbalanced PI, Multi-Stage,Multi-Value) are available, please consult the factory.10. Metric Dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-3E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-381WMIL-DTL-38999 Series I Type Filter ConnectorWall Mount ReceptacleMIL-DTL-38999 Series IContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 381 W NF 15-35 P S P A C NShell StyleW - Wall MountConnector Class(See Table I)TerminationS - Solder CupP - PC TailFlange Mounting StyleH - Round HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)Master KeyS or S1SSquare4xP Holes.005 (.13)M1.45 (36.8) MaxK.200(5.1)MaxE ThreadRR120°TYP85°BSC4x ChamferedDR RoundF MaxPanel Thickness(Including Hardware)Solder Cupor PC Tails.22 (5.6) MinPC TAIL DATAW - Wall MountContactSizePC Tail Ø22D.021.01820.031.02916.038.042© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-4E-Mail: sales@glenair.com

240-381WMIL-DTL-38999 Series I Type Filter ConnectorWall Mount ReceptacleMIL-DTL-38999ConnectorsShellSizeCodeShellSizeMIL-DTL-38999 Series ISquare Flange Panel CutoutsK MinBack PanelL MinFront PanelA 09 .656 (16.7) .625 (15.9)B 11 .796 (20.2) .750 (19.1)C 13 .922 (23.4) .906 (23.0)D 15 1.047 (26.6) 1.016 (25.8)E 17 1.219 (31.0) 1.141 (29.0)F 19 1.297 (32.9) 1.141 (29.0)G 21 1.422 (36.1) 1.266 (32.2)H 23 1.547 (39.3) 1.375 (34.9)J 25 1.672 (42.5) 1.484 (37.7)M Holes.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).155 (3.9).145 (3.7)N BSC.719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9)1.500(38.1)NBack PanelMountingK Min4xM Holes.005 (.13)Front PanelMountingTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)NL MinBTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONME Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelX* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZE© 2010 Glenair, Inc.E THREADS*F MAXK+ .015 (.4)- .000 (0)DIMENSIONSM+ .000 (0)- .005 (.13)CAGE CODE 06324P+ .010 (.3)- .005 (.13)Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-5E-Mail: sales@glenair.comRBSCSThru HoleFlange± .020 (5.1)S1Clinch NutFlange± .020 (5.1)9 .5625-24 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .3595 (9.1) .938 (23.8) 1.019 (25.9)11 .6875-24 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .406 (10.3) 1.031 (26.2) 1.112 (28.2)13 .8125-20 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .453 (11.5) 1.125 (28.6) 1.206 (30.6)15 .9375-20 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .4845 (12.3) 1.219 (31.0) 1.269 (32.2)17 1.0625-18 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .531 (13.5) 1.312 (33.3) 1.362 (34.6)19 1.0625-18 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .578 (14.7) 1.438 (36.5) 1.456 (37.0)21 1.1875-18 UNEF-2A .204 (5.2) .115 (2.9) .790 (20.1) .128 (3.3) .625 (15.9) 1.562 (39.7) 1.562 (39.7)23 1.3125-18 UNEF-2A .204 (5.2) .115 (2.9) .790 (20.1) .147 (3.7) .6875 (17.5) 1.688 (42.9) 1.719 (43.7)25 1.4375-18 UNEF-2A .193 (4.9) .115 (2.9) .790 (20.1) .147 (3.7) .750 (19.1) 1.812 (46.0) 1.844 (46.8)* “E” Accessory threads for shell size 9-17 are one size larger than MIL-DTL-38999, Series I to accommodate filters.

MIL-DTL-38999Connectors240-381RMIL-DTL-38999 Series I Type Filter ConnectorWall Mount Receptaclewith Crimp Removable ContactsMIL-DTL-38999 Series IContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 381 R NF 15-35 P C P A C NShell StyleR - Crimp Removable Wall MountConnector Class(See Table I)TerminationC - CrimpFlange Mounting StyleH - Round HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)NOTE: Crimp removable contacts to conform to MIL-C-39029/57-358, Size 16,MIL-C-39029/57-357 Size 20, and MIL-C-39029/57-354 Size 22D (Supplied loose).Master KeyS or S1Square4xP Holes.005 (.13)M2.20 (55.9) MaxKE ThreadSee Note 9120°TYP85°BSCR - Crimp Removable Wall Mount4x ChamferedDR RoundF MaxPanel Thickness(Including Hardware).22(5.6)Min© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-6E-Mail: sales@glenair.com

240-381RMIL-DTL-38999 Series I Type Filter ConnectorWall Mount Receptaclewith Crimp Removable ContactsMIL-DTL-38999ConnectorsShellSizeCodeShellSizeMIL-DTL-38999 Series ISquare Flange Panel CutoutsK MinBack PanelL MinFront PanelA 09 .656 (16.7) .625 (15.9)B 11 .796 (20.2) .750 (19.1)C 13 .922 (23.4) .906 (23.0)D 15 1.047 (26.6) 1.016 (25.8)E 17 1.219 (31.0) 1.141 (29.0)F 19 1.297 (32.9) 1.141 (29.0)G 21 1.422 (36.1) 1.266 (32.2)H 23 1.547 (39.3) 1.375 (34.9)J 25 1.672 (42.5) 1.484 (37.7)M Holes.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).155 (3.9).145 (3.7)N BSC.719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9)1.500(38.1)NBack PanelMountingK Min4xM Holes.005 (.13)Front PanelMountingTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)NL MinBTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONME Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelX* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZE© 2010 Glenair, Inc.E THREADS*F MAXK+ .015 (.4)- .000 (0)DIMENSIONSM+ .000 (0)- .005 (.13)CAGE CODE 06324P+ .010 (.3)- .005 (.13)Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-7E-Mail: sales@glenair.comRBSCSThru HoleFlange± .020 (5.1)S1Clinch NutFlange± .020 (5.1)9 .5625-24 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .3595 (9.1) .938 (23.8) 1.019 (25.9)11 .6875-24 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .406 (10.3) 1.031 (26.2) 1.112 (28.2)13 .8125-20 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .453 (11.5) 1.125 (28.6) 1.206 (30.6)15 .9375-20 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .4845 (12.3) 1.219 (31.0) 1.269 (32.2)17 1.0625-18 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .531 (13.5) 1.312 (33.3) 1.362 (34.6)19 1.0625-18 UNEF-2A .234 (5.9) .085 (2.2) .820 (20.8) .128 (3.3) .578 (14.7) 1.438 (36.5) 1.456 (37.0)21 1.1875-18 UNEF-2A .204 (5.2) .115 (2.9) .790 (20.1) .128 (3.3) .625 (15.9) 1.562 (39.7) 1.562 (39.7)23 1.3125-18 UNEF-2A .204 (5.2) .115 (2.9) .790 (20.1) .147 (3.7) .6875 (17.5) 1.688 (42.9) 1.719 (43.7)25 1.4375-18 UNEF-2A .193 (4.9) .115 (2.9) .790 (20.1) .147 (3.7) .750 (19.1) 1.812 (46.0) 1.844 (46.8)* “E” Accessory threads for shell size 9-17 are one size larger than MIL-DTL-38999, Series I to accommodate filters.

MIL-DTL-38999Connectors240-381JMIL-DTL-38999 Series I Type Filter ConnectorJam Nut ReceptacleMIL-DTL-38999 Series IContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 381 J P 15-35 P S P A N NShell StyleJ - Jam NutConnector Class(See Table I)TerminationS - Solder CupP - PC TailFlange Mounting StyleN - Not Applicable1.45 (36.8) MaxSee Note 3.915(23.2)O-Ring .200(5.1)MaxMaster KeyED ThreadA120 °TYPSee Note 2Solder Cupor PC TailsBJ - Jam NutC ThreadJam NutMS3186.062 Min Panel Thickness.125 Max Panel ThicknessH.22(5.6)MinPC TAIL DATAContactSizePC Tail Ø22D.020.01820.024.02916.038.042© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-8E-Mail: sales@glenair.com

240-381JMIL-DTL-38999 Series I Type Filter ConnectorJam Nut ReceptacleMIL-DTL-38999ConnectorsTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGEHCLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)RecomendedPanel Cut-OutJTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumX* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.Ni-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelDIMENSIONSSHELLSIZECODEMIL-DTL-38999 Series IJam Nut Panel CutoutSHELLSIZEA 09B 11C 13D 15E 17F 19G 21H 23J 25H.710 (18.0).700 (17.8).835 (21.2).825 (21.0)1.020 (25.9)1.010 (25.7)1.145 (29.1)1.135 (28.8)1.270 (32.3)1.260 (32.0)1.395 (35.4)1.385 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.770 (45.0)1.760 (44.7)J.670 (17.0).660 (16.8).771 (19.6).761 (19.3).955 (24.3).945 (24.0)1.085 (27.6)1.075 (27.3)1.210 (30.7)1.200 (30.5)1.335 (33.9)1.325 (33.7)1.460 (37.1)1.450 (36.8)1.585 (40.3)1.575 (40.0)1.710 (43.4)1.700 (43.2)BSHELLSIZEABC THREADCLASS 2AUNEF PLATEDD THREADCLASS 2AUNEF PLATEDEDIAFGDIAH91113.855 (21.7).645 (16.4).755 (19.2).745 (18.9).942 (23.9).932 (23.7)1.078 (27.4)1.046 (26.6)1.266 (32.2)1.234 (31.3)1.391 (35.3)1.359 (34.5).6875-24 .4375-28 1.188 (30.2).8125-20 .5625-24 1.375 (34.9)1.0000-20 .8875-24 1.500 (38.1).670 (17.0).661 (16.8).771 (19.6).762 (19.4).955 (24.3).946 (24.0).709 (18.0).700 (17.8).834 (21.2).825 (21.0)1.019 (25.9)1.010 (25.7).120 (3.0).100 (2.5).120 (3.0).100 (2.5).120 (3.0).100 (2.5)151.066 (27.1)1.056 (26.8)1.516 (38.5)1.484 (37.7)1.1250-18 .8125-20 1.625 (41.3)1.085 (27.6)1.076 (27.3)1.144 (29.1)1.135 (28.8).120 (3.0).100 (2.5)171.191 (30.3)1.181 (30.0)1.641 (41.7)1.609 (40.9)1.2500-18 .9375-20 1.750 (44.5)1.210 (30.7)1.201 (30.5)1.269 (32.2)1.260 (32.0).120 (3.0).100 (2.5)191.316 (33.4)1.306 (33.2)1.828 (46.4)1.796 (45.6)1.3750-18 1.0625-18 1.938 (49.2)1.335 (33.9)1.326 (33.7)1.394 (35.4)1.385 (35.2).151 (3.8).130 (3.3)211.441 (36.6)1.431 (36.3)1.954 (49.6)1.922 (48.8)1.5000-18 1.1875-18 2.062 (52.4)1.460 (37.1)1.451 (36.9)1.519 (38.6)1.510 (38.4).151 (3.8).130 (3.3)23251.566 (39.8)1.556 (39.5)1.691 (43.0)1.681 (42.7)2.078 (52.8)2.046 (52.0)2.204 (56.0)2.172 (55.2)1.6250-18 1.3125-18 2.188 (55.6)1.7500-18 1.4375-18 2.312 (58.7)1.585 (40.3)1.578 (40.1)1.710 (43.4)1.701 (43.2)1.644 (41.8)1.635 (41.5)1.769 (44.9)1.760 (44.7).151 (3.8).130 (3.3).151 (3.8).130 (3.3)© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-9E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-381AMIL-DTL-38999 Series I Filter ConnectorConnector AdapterMIL-DTL-38999 Series IContact GenderPS - Pins, Plug SideSP - Sockets, Plug SideAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalU = UniversalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Capacitance(See Table II)240 - 381 A P 15-35 PS P A N UShell StyleA - Connector AdapterConnector Class(See Table I)Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not ApplicableInterfacial Seal2.200(55.9)MAXReceptacle EndABPlug EndA - Connector Adapter* Please consult factory for Pin/Pin and/or Socket/Socket contact arrangements.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-10E-Mail: sales@glenair.com

MIL-DTL-38999ConnectorsGlenair MIL-DTL-38999 Series II TypeLow-Profile Filter Connector with Bayonet CouplingMaster How to Order • Part Number BreakdownMIL-DTL-38999Series IIInsert ArrangementPer MIL-STD-1560Capacitance(See Table V)BFilterConnectorProductCodeConnectorClass(See Table I)Termination*S - Solder CupP - PC Tail*Omit for Connector Adapter.Alternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalU = Universal(Connector Adapters Only)240 - 382 J M 15-35 P S P A C NShell StyleW - Wall MountJ - Jam NutA - Connector AdapterContact GenderP - PinS - SocketPS - Conn. Adapter(Pins, Plug Side)SP - Conn. Adapter(Sockets, Plug Side)Flange Mounting StyleN - Not Applicable/Mfgs. OptionH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)Filter TypeP - Pi CircuitC - C CircuitConsult Factory for AdditionalFilter Types, TVS Diodes, andother Custom Filter ConnectorConfigurations.TABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 HermeticStainlessSteelElectroless NickelTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-12E-Mail: sales@glenair.com

Glenair MIL-DTL-38999 Series II TypeLow-Profile Filter Connector with Bayonet CouplingReference InformationMIL-DTL-38999ConnectorsG HolesJGH FlatFront PanelMountingJSee Table IIIBH MinTABLE III: SQUARE FLANGEPANEL CUT-OUTSShellSizeG Holes H Min J BSC8.133 (3.4) .570 .594.123 (3.1) (14.5) (15.1)10.133 (3.4) .690 .719.123 (3.1) (17.5) (18.3)12.133 (3.4) .820 .812.123 (3.1) (20.8) (20.6)14.133 (3.4) .940 .906.123 (3.1) (23.9) (23.0)16.133 (3.4) 1.070 .969.123 (3.1) (27.2) (24.6)18.133 (3.4) 1.190 1.062.123 (3.1) (30.2) (27.0)20.133 (3.4) 1.320 1.156.123 (3.1) (33.5) (29.4)22.159 (4.0) 1.440 1.250.149 (3.8) (36.6) (31.8)24.159 (4.0) 1.570 1.375.149 (3.8) (39.9) (34.9)SHELLSIZE081012141618202224PANEL IV: JAM-NUTPANEL CUT-OUTSG.894 (22.7).884 (22.5)1.020 (25.9)1.010 (25.7)1.144 (29.1)1.134 (28.8)1.269 (32.2)1.259 (32.0)1.394 (35.4)1.384 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.750 (44.5)1.740 (44.2)1.895 (48.1)1.885 (47.9)H Flat.833 (21.2).823 (20.9).957 (24.3).947 (24.1)1.081 (27.5)1.071 (27.2)1.206 (30.6)1.196 (30.4)1.336 (33.9)1.326 (33.7)1.456 (37.0)1.446 (36.7)1.581 (40.2)1.571 (39.9)1.706 (43.3)1.696 (43.1)1.831 (46.5)1.821 (46.3)APPLICATION NOTES1. Materials/Finishes: Shells, Barrel, Coupling Nut, Jam Nut - See Table IInsulators - high grade rigid dielectric/N.A.Seals - FlourosiliconePC Tail & Solder Cup contacts: 50μ" Gold over 50μ" Nickel2. Assembly to be identified with Glenair's name, part number, and datecode - space permitting.3. Insert Arrangement in accordance with MIL-STD-1560.(Arrangement shown for reference only)4. EMI Circular Filter Receptacle connector designed to meet requirements ofMIL-STD-2120 and MIL-DTL-38999, Series II.5. All contacts to have identical filter value. Other filter arrangementsavailable, contact factory.6. Electrical Ratings: DWV- 500 VDC; Standard OperatingVoltage 200 Volts DC; Current Rating 5 Amps (size 22);7. Insulation Resistance: 5000 MegOhms Min. at 200 VDC.8. Operating Temperature -55°C to +125°C (Env Class Connectors)9. Other filter styles (C-L, L-C, Unbalanced PI, Multi-Stage,Multi-Value) are available, please consult the factory.10. Metric Dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-13E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-382WMIL-DTL-38999 Series II Type Filter ConnectorWall Mount ReceptacleMIL-DTL-38999 Series IIContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 382 W M 14-35 P S P A C NShell StyleW - Wall MountConnector Class(See Table I)TerminationS - Solder CupP - PC TailFlange Mounting StyleH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)W - Wall MountMaster Keyway.850 (21.6)Max.219 (5.56) MinFull ThreadE Thread(see note)120°TypCBA2x ABscB Or B1Sq.Solder Cup.300 (7.6) MaxØ USee Table IV4x Ø DHolesØ CMax.322 (8.18).317 (8.05).069 (1.75).058 (1.47)PC Tail.175 (4.45).125 (3.18)Note: ‘E’ ACCESSORY THREADS FOR SHELL SIZE 8 THRU 16 ARE ONESIZE LARGER THAN MIL-DTL-38999 SERIES II TO ACCOMODATE FILTERS.© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-14E-Mail: sales@glenair.com

240-382WMIL-DTL-38999 Series II Type Filter ConnectorWall Mount ReceptacleMIL-DTL-38999ConnectorsG HolesTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGEJCLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)Front PanelMountingShellSize81012141618202224TABLE III: SQUARE FLANGEPANEL CUT-OUTS© 2010 Glenair, Inc.JG Holes H Min J BSC.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).159 (4.0).149 (3.8).625(15.9).750(19.1).906(23.0)1.016(25.8)1.141(29.0)1.141(29.0)1.266(32.2)1.375(34.9)1.484(37.7).594(15.1).719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9)H MinTABLE I: CONNECTOR CLASSSee Table IIISYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelShellSizeABscCAGE CODE 06324X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.Consult Factory for Additional Filter Types,TVS Diodes, and other Custom FilterConnector Configurations.TABLE III: DIMENSIONSThru HoleFlangeTABLE IV: PC TAIL DIAContactSizeØ U22D.021 (0.53).018 (0.46)20.031 (0.79).029 (0.74)16.042 (1.07).038 (0.97)12.096 (2.44).092 (2.34)Clinch NutFlangePrinted in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-15E-Mail: sales@glenair.comB Sq.MaxØ D+.010(.25)-.005 (.13)B1 Sq.±.020 (.51)Ø CMaxE ThreadUNEF-2A8 .594 (15.1) .828 (21.0) .120 (3.0) .895 (22.7) 1.250 (31.8) .5625-2410 .719 (18.3) .954 (24.2) .120 (3.0) 1.019 (25.9) 1.400 (35.6) .6875-2412 .812 (20.6) 1.047 (26.6) .120 (3.0) 1.112 (28.2) 1.500 (38.1) .8125-2014 .906 (23.0) 1.141 (29.0) .120 (3.0) 1.206 (30.6) 1.650 (41.9) .9375-2016 .969 (24.6) 1.234 (31.3) .120 (3.0) 1.269 (32.2) 1.700 (43.2) 1.0625-1818 1.062 (27.0) 1.328 (33.7) .120 (3.0) 1.362 (34.6) 1.800 (45.7) 1.0625-1820 1.156 (29.4) 1.453 (39.9) .120 (3.0) 1.456 (37.0) 2.000 (50.8) 1.1875-1822 1.250 (31.8) 1.578 (40.1) .120 (3.0) 1.562 (39.7) 2.150 (54.6) 1.3125-1824 1.375 (34.9) 1.703 (43.3) .147 (3.7) 1.719 (43.7) 2.280 (57.9) 1.4375-18B

MIL-DTL-38999Connectors240-382J (Hermetic Version Shown)MIL-DTL-38999 Series II Filter ConnectorJam Nut ReceptacleBFilter ConnectorProduct CodeMIL-DTL-38999 Series IIInsert ArrangementIAW MIL-STD-1560Contact GenderP - PinS - SocketTerminationS - Solder CupP - PC TailAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalCapacitance(See Table II)240 - 382 J H2 14-35 P S P A N NShell StyleJ - Jam NutConnector Class(See Table I)Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not ApplicableL Max.J - Jam NutF90°/85°Master KeyB Dia..330 (8.4)MaxPanelThicknessContrasting ColorPin Ends 3 PL.105 (2.7).084 (2.1)EP Max. (Pin)EP Max. (Socket)O-RingSolder-CupContact (P)DC FlatFeedthrough (C)120°BSCTYPDA ThreadNutPer MS27512.175 (4.5).125 (3.2)GH Flat© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-16E-Mail: sales@glenair.com

240-382J (Hermetic Version Shown)MIL-DTL-38999 Series II Filter ConnectorJam Nut ReceptacleMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour Grey TMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP Environmental Stainless Steel Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 Hermetic Stainless Steel Electroless NickelSHELLSIZE0810PANEL IV: JAM-NUTPANEL CUT-OUTSG.894 (22.7).884 (22.5)1.020 (25.9)1.010 (25.7)H Flat.833 (21.2).823 (20.9).957 (24.3).947 (24.1)BTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000Consult Factoryfor AdditionalFilter Types,TVS Diodes,and otherCustom FilterConnectorConfigurations.1214161820221.144 (29.1)1.134 (28.8)1.269 (32.2)1.259 (32.0)1.394 (35.4)1.384 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.750 (44.5)1.740 (44.2)1.081 (27.5)1.071 (27.2)1.206 (30.6)1.196 (30.4)1.336 (33.9)1.326 (33.7)1.456 (37.0)1.446 (36.7)1.581 (40.2)1.571 (39.9)1.706 (43.3)1.696 (43.1)E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650241.895 (48.1)1.885 (47.9)1.831 (46.5)1.821 (46.3)G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZEA THREAD.1P- .03L-TS08 .875-20 UNEF10 .1.000-20 UNEF12 1.125-18 UNEF14 1.250-18 UNEF16 1.375-18 UNEF18 1.500-18 UNEF20 1.625-18 UNEF22 1.750-18 UNS24 1.875-16 UNTABLE IIIB DIA. C FLAT D A/F EP MAX. ES MAX. F G DIA. H L MAX.1.391 (35.3)1.359 (34.5).818 (20.8).811 (20.6)1.266 (32.2)1.234 (31.3)1.516 (38.5) .942 (23.9) 1.391 (35.3)1.484 (37.7) .935 (23.7) 1.359 (34.5)1.641 (41.7) 1.066 (27.1) 1.516 (38.5)1.609 (40.9) 1.059 (26.9) 1.484 (37.7)1.766 (44.9) 1.191 (30.3) 1.641 (41.7)1.734 (44.0) 1.184 (30.1) 1.609 (40.9)1.954 (49.6) 1.321 (33.6) 1.797 (45.6)1.922 (48.8) 1.314 (33.4) 1.765 (44.8)2.032 (51.6) 1.441 (36.6) 1.906 (48.4)2.000 (50.8) 1.434 (36.4) 1.874 (47.6)2.157 (54.8) 1.566 (39.8) 2.032 (51.6)2.125 (54.0) 1.559 (39.6) 2.000 (50.8)2.281 (57.9) 1.691 (43.0) 2.156 (54.8)2.249 (57.1) 1.684 (42.8) 2.124 (53.9)2.406 (61.1) 1.816 (46.1) 2.281 (57.9)2.374 (60.3) 1.809 (45.9) 2.249 (57.1).281 (7.1) .359 (9.1).743 (18.9) .894 (22.7).733 (18.6) .884 (22.5).281 (7.1) .359 (9.1).743 (18.9) 1.020 (25.9).733 (18.6) 1.010 (25.7).281 (7.1) .359 (9.1).743 (18.9) 1.144 (29.1).733 (18.6) 1.134 (28.8).281 (7.1) .359 (9.1).743 (18.9) 1.269 (32.2).733 (18.6) 1.259 (32.0).281 (7.1) .359 (9.1).743 (18.9) 1.394 (35.4).733 (18.6) 1.384 (35.2).281 (7.1) .359 (9.1).743 (18.9) 1.520 (38.6).733 (18.6) 1.510 (38.4).250 (6.4) .344 (8.7).769 (19.5) 1.645 (41.8).759 (19.3) 1.635 (41.5).250 (6.4) .344 (8.7).769 (19.5) 1.750 (44.5).759 (19.3) 1.740 (44.2).250 (6.4) .344 (8.7).769 (19.5) 1.895 (48.1).759 (19.3) 1.885 (47.9)*Some dimensions do not apply. Consult factory.833 (21.2).823 (20.9).957 (24.3).947 (24.1)1.081 (27.5)1.071 (27.2)1.206 (30.6)1.196 (30.4)1.336 (33.9)1.326 (33.7)1.456 (37.0)1.446 (36.7)1.581 (40.2)1.571 (39.9)1.706 (43.3)1.696 (43.1)1.831 (46.5)1.821 (46.3)1.024(26.0)1.024(26.0)1.024(26.0)1.024(26.0)1.024(26.0)1.024(26.0)1.019(25.9)1.019(25.9)1.019(25.9)© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-17E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-382AMIL-DTL-38999 Series II Filter ConnectorConnector AdapterMIL-DTL-38999 Series IIContact GenderPS - Pins, Plug SideSP - Sockets, Plug SideAlternate Key PositionPer MIL-DTL-38999A, B, C, D, N = NormalU = UniversalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Capacitance(See Table II)240 - 382 A M 15-35 PS P A N UShell StyleA - Connector AdapterConnector Class(See Table I)Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not ApplicableA - Connector Adapter1.700(43.2)MAXEMI Ground Spring(Optional)Interfacial Seal(Class 1 & 2)RECEPTACLE ENDABPLUG END* Please consult factory for Pin/Pin and/or Socket/Socket contact arrangements.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-18E-Mail: sales@glenair.com

240-382AMIL-DTL-38999 Series II Filter ConnectorConnector AdapterMIL-DTL-38999ConnectorsCD NAB28° BSCC100°BSC37°BSCBTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerNF Environmental AluminumCadmium O.D. Over ElectrolessNickelP EnvironmentalStainlessSteelElectro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelShellSizeSHELL DIAMETERA MaxB Max08 .474 (12.0) .750 (19.1)10 .591 (15.0) .859 (21.8)12 .751 (19.1) 1.031 (26.2)14 .875 (22.2) 1.156 (29.4)16 1.001 (25.4) 1.281 (32.5)18 1.126 (28.6) 1.391 (35.3)20 1.251 (31.8) 1.531 (38.9)22 1.376 (35.0) 1.656 (42.1)24 1.501 (38.1) 1.777 (45.1)TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300Consult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Filter ConnectorConfigurations.MASTER KEY POSITIONNORMAL A° B° C° D°100° 79° 66° 134° 121°* Reduced DWV – Please consult factory.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-19E-Mail: sales@glenair.com

MIL-DTL-38999ConnectorsGlenair MIL-DTL-38999 Series III TypeFilter Connector with Threaded CouplingMaster How to Order • Part Number BreakdownMIL-DTL-38999Series IIIInsert ArrangementPer MIL-STD-1560Capacitance(See Table II)BFilterConnectorProductCodeConnectorClass(See Table I)Termination*S - Solder CupP - PC TailC - Crimp***Omit for Connector Adapter.**Crimp Option applies to shellstyle R and S only.Alternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalU = Universal(Connector Adapters Only)240 - 383 J P 15-35 P S P A C NShell StyleP - PlugW - Wall MountJ - Jam NutS - Crimp Removable Jam NutD - Dual Flange* Wall MountE - Dual Flange* Jam NutR - Crimp Removable Wall MountA - Connector Adapter* Dual Flange Available Onlywith PC Tail TerminationsContact GenderP - PinS - SocketPS - Conn. Adapter(Pins, Plug Side)SP - Conn. Adapter(Sockets, Plug Side)Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not Applicable/Mfgs. Option**S - Slotted Holes, ChamferedH - Round Holes, ChamferedC - Clinch Nuts (4-40 UNC)*M - Metric Clinch Nuts (M3)**Not Available for Hermeticsand Composites**Not Available for W and R ShellTypesConsult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Configurations.TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.TABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless Nickel* Some dimensions do not apply, see sales drawing 240-383JH2© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-20E-Mail: sales@glenair.com

Glenair MIL-DTL-38999 Series III TypeFilter Connector with Threaded CouplingReference InformationMIL-DTL-38999ConnectorsN4xM Holes.005 (.13)NHJ FlatBFront PanelMountingShellSizeCodeMIL-DTL-38999 Series IIISquare Flange Panel CutoutsShellSizeK MinA 09 .656 (16.7)B 11 .796 (20.2)C 13 .922 (23.4)D 15 1.047 (26.6)E 17 1.219 (31.0)F 19 1.297 (32.9)G 21 1.422 (36.1)H 23 1.547 (39.3)J 25 1.672 (42.5)K Min L Min M Holes N BSC.516(13.1).625(15.9).750(19.1).906(23.0)1.016(25.8)1.141(29.0)1.266(32.2)1.375(34.9)1.484(37.7)Back PanelMounting.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).155 (3.9).145 (3.7).719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9)1.500(38.1)L MinSHELLSIZECODEMIL-DTL-38999 Series IIIJam Nut Panel CutoutSHELLSIZEA 09B 11C 13D 15E 17F 19G 21H 23J 25H.710 (18.0).700 (17.8).835 (21.2).825 (21.0)1.020 (25.9)1.010 (25.7)1.145 (29.1)1.135 (28.8)1.270 (32.3)1.260 (32.0)1.395 (35.4)1.385 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.770 (45.0)1.760 (44.7)J.670 (17.0).660 (16.8).771 (19.6).761 (19.3).955 (24.3).945 (24.0)1.085 (27.6)1.075 (27.3)1.210 (30.7)1.200 (30.5)1.335 (33.9)1.325 (33.7)1.460 (37.1)1.450 (36.8)1.585 (40.3)1.575 (40.0)1.710 (43.4)1.700 (43.2)APPLICATION NOTES1. Materials/Finishes: Shells, Barrel, Coupling Nut, Jam Nut - See Table IInsulators - high grade rigid dielectric/N.A.Seals - FlourosiliconePC Tail & Solder Cup contacts: 50μ" Gold over 50μ" Nickel2. Assembly to be identified with Glenair's name, part number, and datecode - space permitting.3. Insert Arrangement in accordance with MIL-STD-1560.(Arrangement shown for reference only)4. EMI Circular Filter Receptacle connector designed to meet requirements ofMIL-STD-2120 and MIL-DTL-38999, Series III.5. All contacts to have identical filter value. Other filter arrangementsavailable, contact factory.6. Electrical Ratings: DWV- 500 VDC; Standard Operating Voltage200 Volts DC; Current Rating 5 Amps (size 22);7. Insulation Resistance: 5000 MegOhms Min. at 200 VDC.8. Operating Temperature -55°C to +125°C (Env Class Connectors)9. Other filter styles (C-L, L-C, Unbalanced PI, Multi-Stage,Multi-Value) are available, please consult the factory.10. Metric Dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-21E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-383PMIL-DTL-38999 Series III Filter ConnectorPlugMIL-DTL-38999 Series IIIContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 383 P P 15-35 P S P A N NShell StyleP - PlugConnector Class(See Table I)TerminationS - Solder CupFlange Mounting StyleN - Not Applicable.122 (3.1).118 (3.0)KnurlP - PlugMaster Keyway1.370 (34.8) Max.200(5.1)MAXSolder Cup ContactSee Note 3See Note 2CC Max DiaDD Dia MaxGroundingSpringEE Thread© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-22E-Mail: sales@glenair.com

240-383PMIL-DTL-38999 Series III Filter ConnectorPlugMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless Nickel* Some dimensions do not apply, see sales drawing 240-383JH2TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.BDIMENSIONSSHELLSIZECODESHELLSIZECC DiaMaxDD DiaMaxEE THREADB 11 .929 (23.6) .984 (25.0) M15 X 1.0-6g 0.100RC 13 1.110 (28.2 1.157 (29.4 M18 X 1.0-6g 0.100RD 15 1.232 (31.3) 1.280 (32.5) M22 X 1.0-6g 0.100RE 17 1.358 (34.5) 1.406 (35.7) M25 X 1.0-6g 0.100RF 19 1.469 (37.3) 1.516 (38.5) M28 X 1.0-6g 0.100RG 21 1.594 (40.5) 1.642 (41.7 M31 X 1.0-6g 0.100RH 23 1.720 (43.7) 1.768 (44.9) M34 X 1.0-6g 0.100RJ 25 1.843 (46.8) 1.890 (48.0) M37 X 1.0-6g 0.100RConsult Factory for Additional Filter Types, TVSDiodes, and other Custom Configurations.© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-23E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-383WMIL-DTL-38999 Series III Type Filter ConnectorWall Mount ReceptacleMIL-DTL-38999 Series IIIContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 383 W P 15-35 P S P A C NShell StyleW - Wall MountConnector Class(See Table I)TerminationS - Solder CupP - PC TailFlange Mounting StyleH - Round HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)S - Slotted HolesClinch Nuts and Metric Clinch Nuts Not Available for Composites.Helicoils and Threaded Inserts/Specials Available Upon Request.1.450 (36.8) MaxSee Note 3C BSCMaster KeywayA ThreadHG.125 (3.2) MinSeeTable IVforPC TailB or B1 SQW - Wall MountTABLE IV:PC TAIL DIA(Solder Cup)4x Ø PContactSize22D2016Ø U.021 (0.53).018 (0.46).031 (0.8).029 (0.7).042 (1.1).038 (1.0)Red Full MateIndicator BandJ ThreadConsult Factory forAlternative PC TailLengths© 2011 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-24E-Mail: sales@glenair.com

240-383WMIL-DTL-38999 Series III Filter ConnectorWall Mount ReceptacleMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless Nickel* Some dimensions do not apply, see sales drawing 240-383WH2TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.ShellSizeCodeTABLE III: MIL-DTL-38999 Series IIISquare Flange Panel CutoutsShellK Min L MinSizeBack Front M Holes N BSCPanel PanelA 09 .656 (16.7)B 11 .796 (20.2)C 13 .922 (23.4)D 15 1.047 (26.6)E 17 1.219 (31.0)F 19 1.297 (32.9)G 21 1.422 (36.1)H 23 1.547 (39.3)J 25 1.672 (42.5)NBack PanelMountingK Min4x.516(13.1).625(15.9).750(19.1).906(23.0)1.016(25.8)1.141(29.0)1.266(32.2)1.375(34.9)1.484(37.7)M Holes.005 (.13)Front PanelMountingN.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).155 (3.9).145 (3.7)L Min.719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)P ر .010.128(3.3)1.375(34.9) .1561.500 (4.0)(38.1)BSHELLSIZECODESHELLSIZE© 2011 Glenair, Inc.A THREADA 09 .6250- .1P- .3L-TS-2AB 11 .7500- .1P- .3L-TS-2AC 13 .8750- .1P- .3L-TS-2AD 15 1.000- .1P- .3L-TS-2AE 17 1.1875- .1P- .3L-TS-2AF 19 1.2500- .1P- .3L-TS-2AG 21 1.3750- .1P- .3L-TS-2AH 23 1.5000- .1P- .3L-TS-2AJ 25 1.6250- .1P- .3L-TS-2AB SQ0.949 (24.1)0.925 (23.5)1.043 (26.5)1.019 (25.9)1.138 (28.9)1.114 (28.3)1.232 (31.3)1.208 (30.7)1.323 (33.6)1.299 (33.0)1.449 (36.8)1.425 (36.2)1.575 (40.0)1.551 (39.4)1.701 (43.2)1.677 (42.6)1.823 (46.3)1.799 (45.7)CLINCH NUTFLANGEB1 SQTABLE V: WALL MOUNTC BSC D BSC E F G H J THREAD1.019 (25.9) .719 (18.3) .594 (15.1)1.112 (28.2) .812 (20.6) .719 (18.3)1.206 (30.6) .906 (23.0) .812 (20.6)1.269 (32.2) .969 (24.6) .906 (23.0)1.362 (34.6) 1.062 (27.0) .969 (24.6)1.456 (37.0) 1.156 (29.4) 1.062 (27.0)1.562 (39.7) 1.250 (31.8) 1.156 (29.4)CAGE CODE 06324.136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0)1.250 (31.8)1.719 (43.7) 1.375 (34.9).162 (4.1).146 (3.7)1.844 (46.8) 1.500 (38.1) 1.375 (34.9).162 (4.1).146 (3.7).224 (5.7).208 (5.3).202 (5.1).186 (4.7).202 (5.1).186 (4.7).181 (4.6).165 (4.2).202 (5.1).186 (4.7).202 (5.1).186 (4.7).202 (5.1).186 (4.7).250 (6.4).234 (5.9).250 (6.4).234 (5.9).144 (3.7).083 (2.1).171 (4.3).083 (2.1).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).790 (20.1).741 (18.8).790 (20.1).741 (18.8).790 (20.1).741 (18.8)M12 X 1.0-6g 0.100RM15 X 1.0-6g 0.100RM18 X 1.0-6g 0.100RM22 X 1.0-6g 0.100RM25 X 1.0-6g 0.100RM28 X 1.0-6g 0.100RM31 X 1.0-6g 0.100RM34 X 1.0-6g 0.100RM37 X 1.0-6g 0.100RPrinted in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-25E-Mail: sales@glenair.com

240-383SMIL-DTL-38999 Series III Filter ConnectorJam Nut Receptaclewith Crimp Removable ContactsMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless Nickel* Some dimensions do not apply, see sales drawing 240-383JH2TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZECODEMIL-DTL-38999 Series IIIJam Nut Panel CutoutSHELLSIZEA 09B 11C 13D 15E 17F 19G 21H 23J 25H.710 (18.0).700 (17.8).835 (21.2).825 (21.0)1.020 (25.9)1.010 (25.7)1.145 (29.1)1.135 (28.8)1.270 (32.3)1.260 (32.0)1.395 (35.4)1.385 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.770 (45.0)1.760 (44.7)Consult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Configurations.J.670 (17.0).660 (16.8).771 (19.6).761 (19.3).955 (24.3).945 (24.0)1.085 (27.6)1.075 (27.3)1.210 (30.7)1.200 (30.5)1.335 (33.9)1.325 (33.7)1.460 (37.1)1.450 (36.8)1.585 (40.3)1.575 (40.0)1.710 (43.4)1.700 (43.2)BSHELLSIZECODESHELLSIZEA 09 .6250- .1P- .3L-TS-2AB 11 .7500- .1P- .3L-TS-2AC 13 .8750- .1P- .3L-TS-2AD 15 1.000- .1P- .3L-TS-2AE 17 1.1875- .1P- .3L-TS-2AF 19 1.2500- .1P- .3L-TS-2AG 21 1.3750- .1P- .3L-TS-2AH 23 1.5000- .1P- .3L-TS-2AJ 25 1.6250- .1P- .3L-TS-2A© 2008 Glenair, Inc.JAM NUT MOUNTA THREAD B C D E THREAD F THREAD G1.262 (32.1)1.248 (31.7)1.386 (35.2)1.362 (34.6)1.512 (38.4)1.488 (37.8)1.638 (41.6)1.614 (41.0)1.764 (44.8)1.740 (44.2)1.949 (49.5)1.925 (48.9)2.075 (52.7)2.051 (52.1)2.201 (55.9)2.177 (55.3)2.323 (59.0)2.299 (58.4)1.079 (27.4)1.047 (26.6)1.268 (32.2)1.236 (31.4)1.390 (35.3)1.358 (34.5)1.516 (38.5)1.484 (37.7)1.642 (41.7)1.610 (40.9)1.827 (46.4)1.795 (45.6)1.953 (49.6)1.921 (48.8)2.079 (52.8)2.047 (52.0)2.205 (56.0)2.173 (55.2).655 (16.6).645 (16.4).755 (19.2).745 (18.9).942 (23.9).932 (23.7)CAGE CODE 06324M17 X 1.0-6g 0.100R M12 X 1.0-6g 0.100RM20 X 1.0-6g 0.100R M15 X 1.0-6g 0.100RM25 X 1.0-6g 0.100R M18 X 1.0-6g 0.100R.122 (3.1).083 (2.1).122 (3.1).083 (2.1).122 (3.1).083 (2.1)1.068 (27.1).122 (3.1)M28 X 1.0-6g 0.100R M22 X 1.0-6g 0.100R1.058 (26.9) .083 (2.1)1.191 (30.3).122 (3.1)M32 X 1.0-6g 0.100R M25 X 1.0-6g 0.100R1.181 (30.0) .083 (2.1)1.316 (33.4).154 (3.9)M35 X 1.0-6g 0.100R M28 X 1.0-6g 0.100R1.306 (33.2) .114 (2.9)1.441 (36.6).154 (3.9)M38 X 1.0-6g 0.100R M31 X 1.0-6g 0.100R1.431 (36.3) .114 (2.9)1.566 (39.8).154 (3.9)M41 X 1.0-6g 0.100R M34 X 1.0-6g 0.100R1.556 (39.5) .114 (2.9)1.691 (43.0).154 (3.9)M44 X 1.0-6g 0.100R M37 X 1.0-6g 0.100R1.681 (42.7) .114 (2.9)Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-29E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-383DMIL-DTL-38999 Series III Filter ConnectorDual Flange Wall Mount Receptacle with P.C.TailsMIL-DTL-38999 Series IIIContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 383 D P 15-35 P P P A N NShell StyleD - Dual Flange Wall MountConnector Class(See Table I)TerminationP - PC TailFlange Mounting StyleN - Not Applicable/Mfgs. OptionMasterKeyway4-40 Helicoils4 Places.131 (3.3).125 (3.2).820 (20.8).815 (20.7).691 (17.6).686 (17.4).155 ±.020(3.9 ± .5)D - Dual Flange Wall MountP4PLRad H 4PLInterruptedKInterruptedLU(See Table IV)See Note 345° 4PLN 4PLRS.195 (5.0) .100 (2.5)Thread B.250 (6.4)InterruptedJ4-40 Helicoils4 Places© 2010 Glenair, Inc.TABLE IVALTERNATE KEY ANDKEYWAY POSITIONPosition A° B°A 150° 210°B 75° 210°C 95° 230°D 140° 275°Normal and Alternate PositionKey RotationCAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-30E-Mail: sales@glenair.comA° B°TABLE V:PC TAIL DIAMETERContactSizeØU22D.018/.021(0.46/0.53)20.029/.031(0.7/0.8)16.038/.042(1.0/1.1)

240-383DMIL-DTL-38999 Series III Filter ConnectorDual Flange Wall Mount Receptacle with P.C.TailsMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelME Environmental Aluminum Electroless Nickel, 16 Hrs. Salt SprayMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless NickelConsult Factory for Additional Filter Types, TVSTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.BSHELLSIZEB THREAD (PLATED)P+/- .01 (.25)RBSCTABLE III: DIMENSIONSS+/- .012 (.3)J+/- .005 (.13)KBSCL+/- .005 (.13)H+/- .020 (.51)N+/- .020 (.51)9 .625-.1P-.3L-TS-2A .225 (5.7) .719 (18.3) .937 (23.8) 1.016 (25.8) .752 (19.1) .532 (13.5) .225 (5.7) .275 (7.0)11 .7500- .1P- .3L-TS-2A .250 (6.4) .812 (20.6) 1.181 (30.0) 1.062 (27.0) .850 (21.6) .595 (15.1) .250 (6.4) .290 (7.4)13 .8750- .1P- .3L-TS-2A .250 (6.4) .906 (23.0) 1.277 (32.4) 1.250 (31.8) .994 (25.2) .720 (18.3) .375 (9.5) .370 (9.4)15 1.000- .1P- .3L-TS-2A .325 (8.2) .969 (24.6) 1.371 (34.8) 1.375 (34.9) 1.119 (28.4) .843 (21.4) .438 (11.1) .440 (11.2)17 1.1875- .1P- .3L-TS-2A .375 (9.5) 1.062 (27.0) 1.462 (37.1) 1.500 (38.1) 1.237 (31.4) 1.000 (25.4) .562 (14.3) .495 (12.6)19 1.2500- .1P- .3L-TS-2A .500 (12.7) 1.156 (29.4) 1.588 (40.3) 1.625 (41.3) 1.379 (35.0) 1.125 (28.6) .875 (22.2) .540 (13.7)21 1.3750- .1P- .3L-TS-2A .562 (14.3) 1.250 (31.8) 1.714 (43.5) 1.750 (44.5) 1.489 (37.8) 1.240 (31.5) 1.170 (29.7) .625 (15.9)23 1.5000- .1P- .3L-TS-2A .688 (17.5) 1.375 (34.9) 1.840 (46.7) 1.875 (47.6) 1.619 (41.1) 1.328 (33.7) 1.250 (31.8) .660 (16.8)25 1.6250- .1P- .3L-TS-2A .750 (19.1) 1.500 (38.1) 1.962 (49.8) 2.000 (50.8) 1.744 (44.3) 1.453 (36.9) 1.375 (34.9) .740 (18.8)4xM Holes.005 (.13)Back PanelMountingNL MinPanel Cutout DimensionsShellSizeL Min M Holes N BSC09 .656 (16.7).133 (3.4).123 (3.1).719 (18.3)11 .792 (20.2).133 (3.4).123 (3.1).812 (20.6)13 .922 (23.4).133 (3.4).123 (3.1).906 (23.0)15 1.047 (26.6).133 (3.4).123 (3.1).969 (24.6)17 1.219 (31.0).133 (3.4).123 (3.1)1.062 (27.0)19 1.297 (32.9).133 (3.4).123 (3.1)1.156 (29.4)21 1.422 (36.1).133 (3.4).123 (3.1)1.250 (31.8)23 1.547 (39.3).159 (4.0).149 (3.8)1.375 (34.9)25 1.672 (42.5).155 (3.9).145 (3.7)1.500 (38.1)© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-31E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-383EMIL-DTL-38999 Series III Filter ConnectorDual Flange Jam Nut ReceptacleMIL-DTL-38999 Series IIIContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 383 E P 15-35 P P P A N NShell StyleE - Dual Flange Jam NutConnector Class(See Table I)TerminationP - PC TailFlange Mounting StyleN - Not Applicable.835/.825(21.2/21.0).675/.671 (17.1/17.0)E - Dual Flange Jam Nut.131/.125 (3.3/3.2)MasterKeywayDFlat915222833437151016232934.510 (13.0)Max Red BandFull Mate IndicatorSeeNote 3F.172/.1322 Places(4.4/3.4) P4 PlacesU(see Table IV)Radius H4 Places45° 4 Places5101612328293334 37491522InterruptedK DiaInterruptedL DiaN (4 Places)Thread B.100 (2.5)Ø EThread R.110(2.8).250 (6.4)Interrupted J Dia4-40 Helicoils4 PlacesHJ FlatTABLE V:PC TAIL DIAMETERContactØUSize22D2016.018/.021(0.46/0.53).029/.031(0.7/0.8).038/.042(1.0/1.1)© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-32E-Mail: sales@glenair.com

240-383EMIL-DTL-38999 Series III Filter ConnectorDual Flange Jam Nut ReceptacleMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelME Environmental Aluminum Electroless Nickel, 16 Hrs. Salt SprayMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless NickelTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZE091113151719212325MIL-DTL-38999 Series IIIJam Nut Panel CutoutH.710 (18.0).700 (17.8).835 (21.2).825 (21.0)1.020 (25.9)1.010 (25.7)1.145 (29.1)1.135 (28.8)1.270 (32.3)1.260 (32.0)1.395 (35.4)1.385 (35.2)1.520 (38.6)1.510 (38.4)1.645 (41.8)1.635 (41.5)1.770 (45.0)1.760 (44.7)Consult Factory forAdditional Filter Types,TVS Diodes, and otherJ.670 (17.0).660 (16.8).771 (19.6).761 (19.3).955 (24.3).945 (24.0)1.085 (27.6)1.075 (27.3)1.210 (30.7)1.200 (30.5)1.335 (33.9)1.325 (33.7)1.460 (37.1)1.450 (36.8)1.585 (40.3)1.575 (40.0)1.710 (43.4)1.700 (43.2)BTABLE III: DIMENSIONSSHELLSIZEB Thread (Plated)D+ .0059 .625- . 1P- .3L-TS-2A .651 (16.5)11 .7500- .1P- .3L-TS-2A.751 (19.1)13 .8750- .1P- .3L-TS-2A.937 (23.8)1517192123251.0000- .1P- .3L-TS-2A1.8750- .1P- .3L-TS-2A1.2500- .1P- .3L-TS-2A1.3750- .1P- .3L-TS-2A1.5000- .1P- .3L-TS-2A1.6250- .1P- .3L-TS-2A1.063(27.0)1.187(30.2)1.311(33.3)1.434(36.4)1.561(39.7)1.687(42.9)Ø E+ .0121.250(31.8)1.377(35.0)1.500(38.1)1.625(41.3)1.750(44.5)1.937(49.2)2.063(52.4)2.190(55.6)2.311(58.7)F+ .0161.063(27.0)1.259(32.0)1.374(34.9)1.500(38.1)1.625(41.3)1.822(46.3)1.940(49.3)2.073(52.7)2.189(55.6)P+.010(0.25)R ThreadMetric(Plated).225 (5.7) M17 x 1-6g-0.10R.250 (6.4) M20 x 1-6g-0.10R.250 (6.4).M25 x 1-6g-0.10R.325 (8.2) M28 x 1-6g-0.10R.375 (9.5) M32 x 1-6g-0.10R.500(12.7).562(14.3).688(17.5).750(19.1)M35 x 1-6g-0.10RM38 x 1-6g-0.10RM41 x 1-6g-0.10RM44 x 1-6g-0.10RJ Dia+.005(0.13)1.016(25.8)1.062(27.0)1.250(31.8)1.375(34.9)1.500(38.1)1.625(41.3)1.750(44.5)1.875(47.6)2.000(50.8)K DiaBasicL Dia+.005(0.13)H+.020(0.51)N+.020(0.51).752 (19.1) .532 (13.5) .225 (5.7) .275 (7.0).850 (21.6) .595 (15.1) .250 (6.4) .290 (7.4).994 (25.2) .720 (18.3) .375 (9.5) .370 (9.4)1.119 (28.4) .843 (21.4) .438 (11.1)1.237(31.4)1.379(35.0)1.489(37.8)1.619(41.1)1.744(44.3)1.000(25.4)1.125(28.6)1.240(31.5)1.328(33.7)1.453(36.9).562 (14.3).875 (22.2)1.170(29.7)1.250(31.8)1.375(34.9).440(11.2).495(12.6).540(13.7).625(15.9).660(16.8).740(18.8)© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-33E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-383RMIL-DTL-38999 Series III Filter ConnectorWall Mount Receptaclewith Crimp Removable ContactsMIL-DTL-38999 Series IIIContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 383 R P 15-35 P C P A C NShell StyleR - Crimp Removable Wall MountConnector Class(See Table I)TerminationC - CrimpFlange Mounting StyleH - Round Holes, ChamferedC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)S - Slotted Holes, ChamferedNOTE: Crimp removable contacts to conform to MIL-C-39029/57-358, Size 16,MIL-C-39029/57-357 Size 20, and MIL-C-39029/57-354 Size 22D (Supplied loose).Clinch Nuts and Metric Clinch Nuts Not Available for CompositesR - Wall Mount with Crimp Removable ContactsSee Note 3C BSCMaster KeywayA ThreadFully matedIndicator band redHG2.200Max.B SQ9Crimp RemovableContacts SuppliedLoose.4x Ø PJ Thread.520 Max.Panel Thickness:Shell Size 9-19: .218 (5.53) MaxShell Size 21-25: .187 (4.74) Max© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-34E-Mail: sales@glenair.com

240-383RMIL-DTL-38999 Series III Filter ConnectorWall Mount Receptaclewith Crimp Removable ContactsMIL-DTL-38999ConnectorsShellSizePanel Cutout Dimensions09 .656 (16.7)11 .792 (20.2)13 .922 (23.4)15 .047 (26.6)17 .219 (31.0)19 1.297 (32.9)21 1.422 (36.1)23 1.547 (39.3)25 1.672 (42.5)L Min M Holes N BSC.133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).133 (3.4).123 (3.1).159 (4.0).149 (3.8).155 (3.9).145 (3.7).719 (18.3).812 (20.6).906 (23.0).969 (24.6)1.062 (27.0)1.156 (29.4)1.250 (31.8)1.375 (34.9)1.500 (38.1)4xM Holes.005 (.13)Back PanelMountingNL MinConsult Factory forAdditional Filter Types,TVS Diodes, and otherTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGEBTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelXM Environmental Composite Electroless NickelXMT Environmental Composite Nickel Fluorocarbon Polymer (Ni-PTFE)XW Environmental Composite Cad. O.D. Over Electroless NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless NickelCLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZECODESHELLSIZEA 09B 11C 13D 15E 17F 19G 21H 23J 25© 2010 Glenair, Inc.WALL MOUNT WITH CRIMP CONTACTSA THREAD B SQ C BSC D BSC E F G H J THREAD.6250- .1P- .3L-TS-2A.7500- .1P- .3L-TS-2A.8750- .1P- .3L-TS-2A1.000- .1P- .3L-TS-2A1.1875- .1P- .3L-TS-2A1.2500- .1P- .3L-TS-2A1.3750- .1P- .3L-TS-2A1.5000- .1P- .3L-TS-2A1.6250- .1P- .3L-TS-2A0.949 (24.1)0.925 (23.5)1.043 (26.5)1.019 (25.9)1.138 (28.9)1.114 (28.3)1.232 (31.3)1.208 (30.7)1.323 (33.6)1.299 (33.0)1.449 (36.8)1.425 (36.2)1.575 (40.0)1.551 (39.4)1.701 (43.2)1.677 (42.6)1.823 (46.3)1.799 (45.7).719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9)1.500(38.1).594(15.1).719(18.3).812(20.6).906(23.0).969(24.6)1.062(27.0)1.156(29.4)1.250(31.8)1.375(34.9).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).136 (3.5).120 (3.0).162 (4.1).146 (3.7).162 (4.1).146 (3.7)CAGE CODE 06324.224 (5.7).208 (5.3).202 (5.1).186 (4.7).202 (5.1).186 (4.7).202 (5.1).186 (4.7).202 (5.1).186 (4.7).202 (5.1).186 (4.7).202 (5.1).186 (4.7).250 (6.4).083 (2.1).250 (6.4).083 (2.1).143 (3.6).083 (2.1).171 (4.3).083 (2.1).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).820 (20.8).771 (19.6).790 (20.1).741 (18.8).790 (20.1).741 (18.8).790 (20.1).741 (18.8)M12 X 1.0-6g0.100RM15 X 1.0-6g0.100RM18 X 1.0-6g0.100RM22 X 1.0-6g0.100RM25 X 1.0-6g0.100RM28 X 1.0-6g0.100RM31 X 1.0-6g0.100RPر .010Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-35E-Mail: sales@glenair.com.128(3.3)M34 X 1.0-6g0.100R .156M37 X 1.0-6g (4.0)0.100R

MIL-DTL-38999Connectors240-383AMIL-DTL-38999 Series III Filter ConnectorConnector AdapterMIL-DTL-38999 Series IIIContact GenderPS - Pins, Plug SideSP - Sockets, Plug SideAlternate Key PositionPer MIL-DTL-38999A, B, C, D, E, N = NormalU = UniversalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Flange Mounting StyleN - Not Applicable240 - 383 A M 15-35 PS P A N NShell StyleA - Connector AdapterConnector Class(See Table I)Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)A ThreadClass 2A2.250 (57.2)MAXA ThreadClass 2BInterfacial SealRECEPTACLE ENDBBPLUG ENDRed Color Bandfor visual indicationof full mateA - Connector Adapter* Please consult factory for Pin/Pin and/or Socket/Socket contact arrangements.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-36E-Mail: sales@glenair.com

240-383AMIL-DTL-38999 Series III Filter ConnectorConnector AdapterMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cad. O.D. Over Electroless NickelP Environmental Stainless Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2* Hermetic Stainless Electroless Nickel* Some dimensions do not apply, see sales drawing 240-383JH2Consult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Configurations.BTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)CLX* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.CRDRBRARFACE VIEWRECEPTACLESHELLSIZECODESHELLSIZEDIMENSIONSA THREAD CLASS 2B DIA. MAXA-1 09 .6250- .1P- .3L-TS-2A .858 (21.8)B-1 11 .7500- .1P- .3L-TS-2A .984 (25.0)C-1 13 .8750- .1P- .3L-TS-2A 1.157 (29.4)D-1 15 1.000- .1P- .3L-TS-2A 1.280 (32.5)E-1 17 1.1875- .1P- .3L-TS-2A 1.406 (35.7)F-1 19 1.2500- .1P- .3L-TS-2A 1.516 (38.5)G-1 21 1.3750- .1P- .3L-TS-2A 1.642 (41.7)H-1 23 1.5000- .1P- .3L-TS-2A 1.768 (44.9)J-1 25 1.6250- .1P- .3L-TS-2A 1.890 (48.0)© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-37E-Mail: sales@glenair.com

MIL-DTL-38999ConnectorsGlenair MIL-DTL-38999 Series IV TypeFilter Connector with Breech-Lock CouplingMaster How to Order • Part Number BreakdownMIL-DTL-38999Series IVInsert ArrangementPer MIL-STD-1560Capacitance(See Table II)BFilterConnectorProductCodeConnectorClass(See Table I)TerminationS - Solder CupP - PC TailAlternate Key PositionPer MIL-DTL-38999A, B, C, D, K, L, M, R, U,N = Normal240 - 384 J P 15-35 P S P A C NShell StyleJ - Jam NutW - Wall MountContact GenderP - PinS - SocketFlange Mounting StyleN - Not Applicable/Mfgs. OptionH - Round Holes, ChamferedC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)Filter TypeP - Pi CircuitC - C CircuitConsult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Filter ConnectorConfigurations.TABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cadmium O.D. Over Electroless NickelP Environmental Stainless Steel Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 Hermetic Stainless Steel Electroless Nickel© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-38E-Mail: sales@glenair.com

Glenair MIL-DTL-38999 Series IV TypeFilter Connector with Breech-Lock CouplingReference InformationMIL-DTL-38999ConnectorsTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)BX* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.APPLICATION NOTES1. Materials/Finishes: Shells, Barrel, Coupling Nut, Jam Nut - See Table IInsulators - high grade rigid dielectric/N.A.Seals - FlourosiliconePC Tail & Solder Cup contacts: 50μ" Gold over 50μ" Nickel2. Assembly to be identified with Glenair's name, part number, and datecode - space permitting.3. Insert Arrangement in accordance with MIL-STD-1560.(Arrangement shown for reference only)4. EMI Circular Filter Receptacle connector designed to meet requirements ofMIL-STD-2120 and MIL-DTL-38999, Series IV.5. All contacts to have identical filter value. Other filter arrangementsavailable, contact factory.6. Electrical Ratings: DWV- 500 VDC; Standard Operating Voltage200 Volts DC; Current Rating 5 Amps (size 22);7. Insulation Resistance: 5000 MegOhms Min. at 200 VDC.8. Operating Temperature -55°C to +125°C (Env Class Connectors)9. Other filter styles (C-L, L-C, Unbalanced PI, Multi-Stage,Multi-Value) are available, please consult the factory.10. Metric Dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-39E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-384JMIL-DTL-38999 Series IV Filter ConnectorJam Nut ReceptacleMIL-DTL-38999 Series IVContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, K, L, M, R, UN = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 384 J P 15-35 P P P A N NShell StyleJ - Jam NutConnector Class(See Table I)TerminationP - PC TailFlange Mounting StyleN - Not ApplicableJ - Jam Nut.1449 (36.8)Max90°/85°Master Key (Blue)A Dia.1.100(27.9)G PanelThicknessHO Ring.025 (.6) TYPSolder Dip to Within.050 (1.3) of Rear of ConnectorBCFlat.022 (.6).018 (.5)EBFull-Mate Indicator (Blue)F ThreadNut PER D38999/28 .335(8.5)Max.196 (5.0).156 (4.0)(PC Tail)© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-42E-Mail: sales@glenair.com

240-384JMIL-DTL-38999 Series IV Filter ConnectorJam Nut ReceptacleMIL-DTL-38999ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cadmium O.D. Over Electroless NickelP Environmental Stainless Steel Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 Hermetic Stainless Steel Electroless NickelBTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGESHELLSIZECODESHELLSIZEB 11C 13D 15E 17F 19G 21H 23J 25ADiameterCLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.B1.385 (35.2) 1.267 (32.2)1.362 (34.6) 1.232 (31.3)1.511 (38.4) 1.393 (35.4)1.488 (37.8) 1.358 (34.5)CFLAT.754 (19.2).745 (18.9).941 (23.9).932 (23.7)1.637 (41.6) 1.519 (38.6) 1.065 (27.1)1.614 (41.0) 1.484 (37.7) 1.056 (26.8)1.763 (44.8) 1.641 (41.7) 1.190 (30.2)1.740 (44.2) 1.606 (40.8) 1.181 (30.0)1.948 (49.5) 1.830 (46.5) 1.316 (33.4)1.925 (48.9) 1.795 (45.6) 1.306 (33.2)2.074 (52.7) 1.956 (49.7) 1.441 (36.6)2.051 (52.1) 1.921 (48.8) 1.431 (36.3)2.200 (55.9) 2.078 (52.8) 1.565 (39.8)2.177 (55.3) 2.043 (51.9) 1.556 (39.5)2.326 (59.1) 2.204 (56.0) 1.692 (43.0)2.299 (58.4) 2.169 (55.1) 1.681 (42.7)TABLE III: DIMENSIONSEDIAMETER.779 (19.8).759 (19.3).909 (23.1).889 (22.6)1.035 (26.3)1.015 (25.8)1.157 (29.4)1.137 (28.9)1.283 (32.6)1.263 (32.1)1.409 (35.8)1.389 (35.3)1.535 (39.0)1.515 (38.5)1.657 (42.1)1.637 (41.6)F THREADISO METRICM20 X 1.0-6gM25 X 1.0-6gM28 X 1.0-6gM32 X 1.0-6gM35 X 1.0-6gM38 X 1.0-6gM41 X 1.0-6gM44 X 1.0-6gJ Dia.Recomended PanelCut-OutG.125 (3.2).059 (1.5).125 (3.2).059 (1.5).125 (3.2).059 (1.5).125 (3.2).059 (1.5).125 (3.2).059 (1.5).125 (3.2).059 (1.5).125 (3.2).059 (1.5).125 (3.2).059 (1.5)H.118 (3.0).094 (2.4).118 (3.0).094 (2.4).118 (3.0).094 (2.4).118 (3.0).094 (2.4).149 (3.8).125 (3.2).149 (3.8).125 (3.2).149 (3.8).125 (3.2).149 (3.8).125 (3.2)JDiameter.832 (21.1).822 (20.9)1.017 (25.8)1.007 (25.6)K.769 (19.5).759 (19.3).955 (24.3).945 (24.0)1.144 (29.1) 1.084 (27.5)1.134 (28.8) 1.074 (27.3)1.271 (32.3) 1.208 (30.7)1.261 (32.0) 1.198 (30.4)1.394 (35.4) 1.333 (33.9)1.384 (35.2) 1.323 (33.6)1.517 (38.5) 1.459 (37.1)1.507 (38.3) 1.449 (36.8)1.644 (41.8) 1.580 (40.1)1.634 (41.5) 1.570 (39.9)1.769 (44.9) 1.709 (43.4)1.759 (44.7) 1.699 (43.2)© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-43E-Mail: sales@glenair.com

MIL-DTL-38999Connectors240-384WMIL-DTL-38999 Series IV Filter ConnectorWall Mount ReceptacleMIL-DTL-38999 Series IVContact GenderP - PinS - SocketAlternate Key PositionPer MIL-DTL-38999A, B, C, D, K, L, M, R, UN = NormalBFilter ConnectorProduct CodeInsert ArrangementIAW MIL-STD-1560Filter Type(See Table VI)Capacitance(See Table IV)240 - 384 W M 15-35 P S P C H NW - Wall MountShell StyleW - Wall MountConnector Class(See Table III)TerminationP - PC TailS - Solder CupFlange Mounting StyleH - Round Holes, ChamferedC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)1.449 (36.8)Max4x Chamferedor RoundedMaster Key(Blue).819 (20.8).756 (19.2).035 (0.9).008 (0.2).102 (2.6).083 (2.1).196 (5.0).156 (4.0)(PC Tail)Ø USee Table VII14 12122154x BBSCØ CA Sq.See Note 34x Ø D HolesFull-mateIndicator(Blue)G Thread.125 Min(Solder Cup).175 MaxPanel Thk4x Ø G HolesHHHBack PanelMountingØ E Min.Front PanelMountingØ F Min.© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-44E-Mail: sales@glenair.com

240-384WMIL-DTL-38999 Series IV Filter ConnectorWall Mount ReceptacleMIL-DTL-38999ConnectorsTABLE I: DIMENSIONSSHELLSIZECODESHELLSIZEB 11C 13D 15E 17F 19G 21H 23J 25ASq1.0511.0081.1451.1021.2401.1971.3341.2911.4601.4171.5831.5391.7091.6651.8351.791BBSC.812.906.9691.0621.1561.2501.3751.500CDia.793.778.919.9041.0441.0291.1701.1551.2941.2791.4191.4041.5441.5291.6701.654DDia.138.122.138.122.138.122.138.122.138.122.138.122.157.142.157.142Ø EMin.Ø FMin.G ThreadMetric.796 .625 M15X1.0-6g 0.100R.922 .750 M18X1.0-6g 0.100R1.047 .906 M22X1.0-6g 0.100R1.219 1.016 M25X1.0-6g 0.100R1.297 1.142 M28X1.0-6g 0.100R1.422 1.266 M31X1.0-6g 0.100R1.547 1.375 M34X1.0-6g 0.100R1.672 1.484 M37X1.0-6g 0.100RØ HHoles.133.123.133.123.133.123.133.123.133.123.133.123.159.149.159.149J.817.807.911.901.973.9631.0671.0571.1611.1511.2551.2451.3801.3701.5051.495ContactSize22D2016TABLE VIIPC TailDiameter(ØU).018/.021(0.5/0.5).029/.031(0.7/.08).038/.042(1.0/1.1)BTABLE III: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE)NF Environmental Aluminum Cadmium O.D. Over Electroless NickelP Environmental Stainless Steel Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 Hermetic Stainless Steel Electroless NickelTABLE IV: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* DWV - 500 VDC Min. Filter Class X, Y & Z are 250DWV Min.TABLE VFlangeSYMMountingNHCTABLE VISYM Filter TypePCNotApplicableChamferedHolesClinch Nut(4-40 UNC)PI-SectionC OnlyTABLE III: CONNECTOR CLASSPATTERN 22D 20 16 12 1011-2 211-4 411-5 511-35 1311-98 611-99 713-4 413-8 813-35 2213-98 1015-5 515-18 1815-35 3715-97 8 417-6 617-8 817-26 2617-35 5519-11 1119-31 3219-35 6621-11 1121-16 1621-35 7921-39 37 221-41 4123-21 2123-35 10023-55 5525-4 48 825-19 1925-29 2925-35 12825-43 23 2025-61 61© 2010 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-45E-Mail: sales@glenair.com

MIL-DTL-26482ConnectorsGlenair MIL-DTL-26482 Series II TypeFilter Connector with Bayonet CouplingMaster How to Order • Part Number BreakdownMIL-DTL-26482Series IIInsert ArrangementPer MIL-STD-1669Capacitance(See Table II)BFilterConnectorProductCodeConnectorClass(See Table I)TerminationS - Solder CupP - PC TailAlternate Key PositionW, X, Y, Z, N = Normal240 - 264 J P 16-26 P S P A C NShell StyleW - Wall MountJ - Jam NutA - Connector AdapterContact GenderP - PinS - SocketPS - Conn. Adapter(Pins, Plug Side)SP - Conn. Adapter(Sockets, Plug Side)Flange Mounting StyleN - Not Applicable/Mfgs. OptionH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)Filter TypeP - Pi CircuitC - C CircuitConsult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Filter ConnectorConfigurations.© 2008 Glenair, Inc.TABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNF Environmental AluminumPEnvironmentalStainlessSteelZN Environmental AluminumH2HermeticStainlessSteelNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerCadmium O.D. Over ElectrolessNickelElectro-Deposited NickelZinc-Nickel Over ElectrolessNickelElectroless NickelCAGE CODE 06324TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-44E-Mail: sales@glenair.com

Glenair MIL-DTL-26482 Series II TypeFilter Connector with Bayonet CouplingReference InformationMIL-DTL-26482ConnectorsACAC BB8-338- 98FEADBCEDAFCBNOTE: Glenair MIL-DTL-26482 Type Filter Connectorsmate with both Series I and II 26482 products.DCBAFEGHDFACBEDAACCBBGGFHFHKAEJEJABDBDCCEGAHHBCDJHGKNPAMFLBECDLMKNXJYPWHRZVASTGUBFCEDGFMHEJLAR APS TN abZcMYLXKJ HDBKCBCUDVEWFGJKHGFRGHLMPAEFANBEDCBDCJKHGLTMSUFNARPEBDCRA BPS T CN YZ DMUXV ELWFKGJ HKJLHUMNTGA BP CVSRFEDBEACDBKKJHHLJGFGGEAHDBCGHFJAKLEDBCSRP dcNbM gaLZKJABTCe UDVf EWFXY GHT A BSU VR eCf WP dj g DcXNhEYM bFZL aGK JHL AMS NR PFEBCDKVJUHL AW M BXNa Y CZ PDT S REGFRPaNZMYdL XKJABCSDb TcEUFVWGHW AVBUj X CYT iDk Zh r m aSEgR q nbFf p cPd GN eHMJL KJMFALKEBDCKJLHM ABNUPVTRSEG FCDNMLWKVUJHABPR CXSDTEFGMUHNTAVGPSBRFCEDKLJWXHMVYcbNdUGAaZPBTFRSCED10-610- 9812-312-812- 1014-414-514- 9 14- 1214-1514-1814-1914- 2216-816-1416-2316-2616-9516- 9918-818-1118-3018- 32 18- 85 18- 8820-16 20-2420-2720-3920-4120- 9022-12 22-1922-2122-3222-3422-4122-5522- 95 22- 9624-19 24-2724-3124- 61YXWLKJHVZMfeGNagdUAPbcTFBQRSECDVWUTLKXrSsAHBJG N K CM LFDEWVU jiT shS rgR qfPeNMABCX YDk ZEt m anFbp GcHdJKLAN ATBUMBSCb P RVSa h CRdeDckf Wj iZg d TP cEj g XhDY fe UbNFYXJVW EMa Z GHFLHGK JYtqpRuFFEEDDnPAZ a bv cGCCmNHHkMwNN JJPPMM KKLLBBAAjLxBzdiyKeChfgJDHEFGAPPLICATION NOTESTUSRFJVHWijhPKGEPGXNRksrgMAHANFYZmtqfALLaBDMEBnepBKbCcdJCCDDHEFGPNRBS T UVW Cmn p Xk AA q Yz BB r Dj GG CC Zy HH s Ei FF DD ax EE t Fh w u bg v cf dMGLKeAJHUTSRVfPNMA BCDW X Y ZghejdLcKabJEHFGFEAGDBC1. Materials/Finishes: Shells, Barrel, Coupling Nut, Jam Nut - See Table IInsulators - high grade rigid dielectric/N.A.Seals - FlourosiliconePC Tail & Solder Cup contacts: 50μ" Gold over 50μ" Nickel2. Assembly to be identified with Glenair's name, part number, and datecode - space permitting.3. Insert Arrangement in accordance with MIL-STD-1669.(Arrangement shown for reference only)4. EMI Circular Filter Receptacle connector designed to meet requirements ofMIL-C-26482.5. All contacts to have identical filter value. Other filter arrangementsavailable, contact factory.6. Electrical Ratings: DWV- 500 VDC; Standard OperatingVoltage 200 Volts DC; Current Rating 5 Amps (size 22);7. Insulation Resistance: 5000 MegOhms Min. at 200 VDC.8. Operating Temperature -55°C to +125°C (Env Class Connectors)9. Other filter styles (C-L, L-C, Unbalanced PI, Multi-Stage,Multi-Value) are available, please consult the factory.10. Metric Dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-45E-Mail: sales@glenair.com

MIL-DTL-26482Connectors240-264WMIL-DTL-26482 Series II TypeWall Mount ReceptacleMIL-C-26482 Series IIContact GenderP - PinS - SocketAlternate Key PositionW, X, Y, Z, N = NormalBFilter ConnectorProduct CodeInsert ArrangementPer MIL-STD-1669Filter TypeP - Pi CircuitC - C CircuitCapacitance(See Table II)240 - 264 W P 16-26 P S P A H NShell StyleW - Wall MountConnector Class(See Table I)TerminationS - Solder CupFlange Mounting StyleH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3).060 (1.5) WidthPolarizing StripeMasterPolarizingKeywayMin. Edge DistanceRelative to Mounting HolesShell Sizes 8-18 = .035 (.9)Shell Sizes 20-24 = .050 (1.3)PeripheralGasketL Max.REFFGThread DSolder CupContactBTYPCH TYP4 PLAInterfacialSealP (Size 20 Contacts)V (Size 16 & 12 Contacts)W - Wall Mount© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-46E-Mail: sales@glenair.com

240-264WMIL-DTL-26482 Series II TypeWall Mount ReceptacleMIL-DTL-26482ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNF Environmental AluminumPEnvironmentalStainlessSteelZN Environmental AluminumH2HermeticStainlessSteelNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerCadmium O.D. Over ElectrolessNickelElectro-Deposited NickelZinc-Nickel Over ElectrolessNickelElectroless NickelTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.BTABLE III: DIMENSIONSSHELLSIZEABCMOUNTINGLOCATORDTHREAD(CLASS 2)F G H L (Max) P VPANELCUT-OUTMAX.WEIGHT(Lbs.)8.828(21.0).594(15.1).563 (14.3).557 (14.1).500-20 UNF.078 (2.0).046 (1.2).120(3.0)1.38 (35.1).178 (4.5).188 (4.8).248 (6.3).188 (4.8).570 (14.5) .03810.954(24.2).719(18.3).673 (17.1).667 (16.9).625-24 UNEF.078 (2.0).046 (1.2).120(3.0)1.38 (35.1).178 (4.5).188 (4.8).248 (6.3).188 (4.8).680 (17.3) .04412141.047(26.6)1.141(29.0).812(20.6).906(23.0).782 (19.9).776 (19.7).907 (23.0).901(22.9).750-20 UNEF.875-20 UNEF.431 (10.9).462 (11.7).078 (2.0).046 (1.2).078 (2.0).046 (1.2).120(3.0).120(3.0)1.38 (35.1)1.38 (35.1).178 (4.5).188 (4.8).178 (4.5).188 (4.8).248 (6.3).188 (4.8).248 (6.3).188 (4.8).789 (20.0) .052.914 (23.2) .070161.234(31.3).969(24.6)1.032 (26.2)1.026 (26.1)1.000-20 UNEF.078 (2.0).046 (1.2).120(3.0)1.38 (35.1).178 (4.5).188 (4.8).248 (6.3).188 (4.8)1.039 (6.4) .085181.328(33.7)1.062(27.0)1.157 (29.4)1.151 (29.2)1.0625-18 UNEF.078 (2.0).046 (1.2).120(3.0)1.38 (35.1).178 (4.5).188 (4.8).248 (6.3).188 (4.8)1.164 (29.6) .09820221.453(36.9)1.578(40.1)1.156(29.4)1.250(31.8)1.251 (31.8)1.245 (31.6)1.376 (35.0)1.371 (34.8)1.1875-18 UNEF.556 (14.1).587 (14.9)1.3125-18 UNEF.110 (2.8).078 (2.0).110 (2.8).078 (2.0).120(3.0).120(3.0)1.44 (36.6)1.44 (36.6).178 (4.5).188 (4.8).178 (4.5).188 (4.8).248 (6.3).188 (4.8).216 (5.5).156 (4.0)1.258 (32.0) .1101.383 (35.1) .150241.703(43.3)1.375(34.9)1.501 (38.1)1.495 (38.0)1.4375-18 UNEF.589 (15.0).620 (15.7).110 (2.8).078 (2.0).147(3.7)1.44 (36.6).178 (4.5).188 (4.8).216 (5.5).156 (4.0)1.508 (38.3) .280© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-47E-Mail: sales@glenair.com

MIL-DTL-26482Connectors240-264JMIL-DTL-26482 Series II Type Filter ConnectorJam Nut ReceptacleMIL-C-26482 Series IIContact GenderP - PinS - SocketCapacitance(See Table II)BFilter ConnectorProduct CodeInsert ArrangementPer MIL-STD-1669Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not Applicable240 - 264 J P 16-26 P S P A N NShell StyleJ - Jam NutConnector Class(See Table I)TerminationS - Solder CupAlternate Key PositionW, X, Y, Z, N = NormalL Max.REFMasterPolarizingKeywayJ - Jam Nut.060 (1.5) WidthPolarizing StripeBPeripheralGasketInterfacialSealFGP (Size 20 Contacts)V (Size 16 & 12 Contacts)RO-RingACTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.© 2008 Glenair, Inc.APaintedBayonetPin EndsCAGE CODE 06324N ThreadS.027 (.7).011 (.3)Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-48E-Mail: sales@glenair.comJThread DTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNF Environmental AluminumPEnvironmentalStainlessSteelZN Environmental AluminumH2HermeticStainlessSteelNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerCadmium O.D. Over ElectrolessNickelElectro-Deposited NickelZinc-Nickel Over ElectrolessNickelElectroless Nickel

240-264JMIL-DTL-26482 Series II Type Filter ConnectorJam Nut ReceptacleMIL-DTL-26482ConnectorsEPanelCut-OutKSHELLSIZE81012141618202224A+.000 (0)-.031 (.8)LENGTH.954(24.2)1.078(27.4)1.266(32.2)1.391(35.3)1.516(38.5)1.641(41.7)1.828(46.4)1.954(49.6)2.078(52.8)B+.000 (0)-.031 (.8)ACROSSFLANGECORNER1.078(27.4)1.203(30.6)1.391(35.3)1.516(38.5)1.641(41.7)1.766(44.9)1.954(49.6)2.078(52.8)2.203(56.0)C+.000 (0)-.010 (.3)MTG.FLAT.530(13.5).655(16.6).818(20.8).942(23.9)1.062(27.0)1.191(30.3)1.316(33.4)1.441(36.6)1.566(39.8)TABLE III: DIMENSIONSDTHREAD(CLASS 2)EPANEL FLATLOCATION.500-20 UNF .536(13.6).625-24 UNEF .661 (16.8).750-20 UNEF .824 (20.9).875-20 UNEF .948 (24.1)1.000-20 UNEF 1.072 (27.2)1.0625-18 UNEF 1.197 (30.4)1.1875-18 UNEF 1.322 (33.6)1.3125-18 UNEF 1.447 (36.8)1.4375-18 UNEF 1.572 (39.9)FMOUNTINGFLANGELOCATION.707 (18.0).691 (17.6).707 (18.0).691 (17.6).707 (18.0).691 (17.6).707 (18.0).691 (17.6).707 (18.0).691 (17.6).707 (18.0).691 (17.6).772 (19.6).754 (19.2).772 (19.6).754 (19.2).803 (20.4).785 (20.0)GMOUNTINGFLANGETHINCKNESS.113 (2.9).097 (2.5).113 (2.9).097 (2.5).113 (2.9).097 (2.5).113 (2.9).097 (2.5).113 (2.9).097 (2.5).113 (2.9).097 (2.5).148 (3.8).128 (3.3).148 (3.8).128 (3.3).148 (3.8).128 (3.3)BSHELL SIZEJ+/- .010 (.3)TO THREADCHAMFERK+.010 (.3)-.005 (.1)PANELMOUNTINGHOLETABLE III: DIMENSIONS (CONTINUED)LOVERALLLENGTHNUNEF-2AMOUNTINGTHREAD8 .368 (9.3) .572 (14.5) 1.38 (35.1) .5625-2410 .368 (9.3) .697 (17.7) 1.38 (35.1) .6875-2412 .368 (9.3) .885 (22.5) 1.38 (35.1) .875-2014 .368 (9.3) 1.010 (25.7) 1.38 (35.1) 1.000-2016 .368 (9.3) 1.135 (28.8) 1.38 (35.1) 1.125-1818 .368 (9.3) 1.260 (32.0) 1.38 (35.1) 1.250-1820 .368 (9.3) 1.385 (35.2) 1.44 (36.6) 1.375-1822 .368 (9.3) 1.510 (38.4) 1.44 (36.6) 1.500-1824 .395 (10.0) 1.635 (41.5) 1.44 (36.6) 1.625-18P.134 (3.4).074 (1.9).134 (3.4).074 (1.9).134 (3.4).074 (1.9).134 (3.4).074 (1.9).134 (3.4).074 (1.9).134 (3.4).074 (1.9).099 (2.5).039 (1.0).099 (2.5).039 (1.0).099 (2.5).039 (1.0)SPANEL THICK-NESSMIN..062(1.6).062(1.6).062(1.6).062(1.6).062(1.6).062(1.6).062(1.6).062(1.6).062(1.6)MAX..187(4.8).187(4.8).187(4.8).187(4.8).187(4.8).187(4.8).250(6.4).250(6.4).250(6.4)V.204 (5.2).144 (3.7).204 (5.2).144 (3.7).204 (5.2).144 (3.7).204 (5.2).144 (3.7).204 (5.2).144 (3.7).204 (5.2).144 (3.7).169 (4.3).109 (2.8).169 (4.3).109 (2.8).169 (4.3).109 (2.8)MAXWEIGHT(Lbs.).0430(1.1).0610(1.5).0880(2.2).1100(2.8).1310(3.3).1720(4.4).2110(5.4).2420(6.1).2930(7.4)© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-49E-Mail: sales@glenair.com

MIL-DTL-26482Connectors240-264AGlenair MIL-DTL-26482 Series II TypeConnector AdapterMIL-C-26482 Series IIContact GenderPS - Pins, Plug SideSP - Sockets, Plug SideBFilter ConnectorProduct CodeInsert ArrangementPer MIL-STD-1669Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not Applicable240 - 264 A P 16-26 PS P A N NShell StyleA - Connector AdapterConnector Class(See Table I)Capacitance(See Table II)Alternate Key PositionW, X, Y, Z, N = Normal2.200 (55.9)MAXRECEPTACLE ENDABPLUG ENDA - Connector Adapter© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-50E-Mail: sales@glenair.com

240-264AGlenair MIL-DTL-26482 Series II TypeConnector AdapterMIL-DTL-26482ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNF Environmental AluminumNi-PTFE 1000 Hour Grey TMNickel Fluorocarbon PolymerCadmium O.D. Over ElectrolessNickelBP Environmental Stainless Steel Electro-Deposited NickelZN Environmental AluminumZinc-Nickel Over ElectrolessNickelH2 Hermetic Stainless Steel Electroless NickelTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELLSIZETABLE III: SHELL SIZEA MAXB MAX08 .474 (12.0) .750 (19.1)10 .591 (15.0) .859 (21.8)12 .751 (19.1) 1.031 (26.2)14 .875 (22.2) 1.156 (29.4)16 1.001 (25.4) 1.281 (32.5)18 1.126 (28.6) 1.391 (35.3)20 1.251 (31.8) 1.531 (38.9)22 1.376 (35.0) 1.656 (42.1)24 1.501 (38.1) 1.777 (45.1)© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-51E-Mail: sales@glenair.com

MIL-DTL-83723ConnectorsGlenair MIL-DTL-83723 Series III TypeFilter Connector with Threaded CouplingMaster How to Order • Part Number BreakdownMIL-DTL-83723Series IIIInsert ArrangementPer MIL-STD-1554Capacitance(See Table II)BFilterConnectorProductCodeConnectorClass(See Table I)Termination*S - Solder Cup*Omit for ConnectorAdapter.Alternate Key PositionA, B, C, D, E, N = Normal240 - 837 J P 14-04 P S P A C NShell StyleW - Wall MountA - Connector AdapterContact GenderP - PinS - SocketFlange Mounting StyleN - Not Applicable/Mfgs. OptionH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3)TABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.Filter TypeP - Pi CircuitC - C CircuitConsult Factory forAdditional Filter Types,TVS Diodes, and otherCustom Filter ConnectorConfigurations.TABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental AluminumNF Environmental AluminumPEnvironmentalStainlessSteelZN Environmental AluminumH2HermeticStainlessSteelNi-PTFE 1000 Hour GreyTMNickel Fluorocarbon PolymerCadmium O.D. Over ElectrolessNickelElectro-Deposited NickelZinc-Nickel Over ElectrolessNickelElectroless Nickel© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-52E-Mail: sales@glenair.com

MIL-DTL-83723 Series III Filter ConnectorsInsert ArrangementsMIL-DTL-83723ConnectorsALTERNATE KEYWAY POSITIONSInsertSize 8 Size 10 Sizes 12 thru 24PositionA° B° C° D° A° B° C° D° A° B° C° D° E°N=Normal 105 140 210 265 105 140 215 265 105 140 215 265 01 - - - - 105 140 215 265 105 140 215 265 102 - - - - 105 140 215 265 105 140 215 265 203 - - - - 105 140 215 265 105 140 215 265 304 - - - - 105 140 215 265 105 140 215 265 405 - - - - 105 140 215 265 105 140 215 265 506 102 132 248 320 102 132 248 320 18 149 192 259 07 80 118 230 312 80 118 230 312 92 152 222 342 08 35 140 205 275 35 140 205 275 84 152 204 334 09 64 155 234 304 64 155 234 304 24 135 199 240 010 - - - - 25 115 220 270 98 152 268 336 0BShellSizeDesign081012141618202224INSERT ARRANGEMENTSInsertArrangementDash No.Contact Size:Quantity20 16 1208-02 208-03 308-98 310-05 510-02 210-06 610-20 212-03 312-12 1214-04 7 414-07 314-12 914-15 1516-10 1016-24 2418-08 818-14 1418-31 3120-16 1620-25 19 620-28 24 420-39 37 220-41 4122-12 1222-19 1922-32 26 622-39 27 1222-35 5524-19 1924-43 23 2024-57 55 224-61 61In alternate positions, the pin insertrotates clockwise while the socketinsert rotates counterclockwise thesame number of degrees relative to thecenter line of the master key or keyway.CDBAFACE VIEW RECEPTACLEPOSITION N, 6 THRU 10© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-53E-Mail: sales@glenair.com

MIL-DTL-83723Connectors240-837WMIL-DTL-83723/83 Series III Filter ReceptacleWall Mount ReceptacleMIL-DTL-83723/83 Series IIIContact GenderP - PinsS - SocketAlternate Key PositionA, B, C, D, E, N = NormalBFilter ConnectorProduct CodeInsert ArrangementPer MIL-STD-1554TerminationS - Solder CupCapacitance(See Table V)240 - 837 W P 14-12 P S P A C NShell StyleW - Wall MountConnector Class(See Table I)Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleH - Chamfered HolesC - Clinch Nuts (4-40 UNC)M - Metric Clinch Nuts (M3).224/.164 (5.7/4.2)Contact Sizes 12 & 16.194/.134 (4.9/3.4)Contact Size 20.904 (23.0)Max..072 (1.8).052 (1.3)R ThreadDShell I.D.W - Wall MountHF GØ C Max. Max. A (TYP) B (TYP)Seal.50 (12.7).728 (18.5).708 (18.0)E Max.ResilientInsert© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-54E-Mail: sales@glenair.com

240-837WMIL-DTL-83723/83 Series III Filter ReceptacleWall Mount ReceptacleMIL-DTL-83723ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon polymer (Ni-PTFE)NF Environmental Aluminum Cadmium O.D. Over Electroless NickelP Environmental Stainless Steel Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 Hermetic Stainless Steel Electroless NickelBSHELLSIZE© 2008 Glenair, Inc.A B C DTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.SHELL I.D.TABLE III: DIMENSIONSERESILIENTINSERTCAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-55E-Mail: sales@glenair.comFMAX.SEALGMAX.8 .812 (20.6) .594 (15.1) .500 (12.7).418 (10.6).413 (10.5).290 (7.4) .394 (10.0) .562 (14.3)10 .937 (23.8) .719 (18.3) .560 (14.2).535 (13.6).530 (13.5).388 (9.9) .515 (13.1) .696 (17.7)12 1.031 (26.2) .812 (20.6) .750 (19.1).705 (17.9).700 (17.8).558 (14.2) .685 (17.4) .875 (22.2)14 1.125 (28.6) .906 (23.0) .810 (20.6).774 (19.7).769 (19.5).627 (15.9) .754 (19.2) .936 (23.8)16 1.250 (31.8) .969 (24.6) .930 (23.6).901 (22.9).896 (22.8).772 (19.6) .881 (22.4) 1.062 (27.0)181.007 (25.6)1.343 (34.1) 1.062 (27.0) 1.060 (26.9)1.002 (25.5).860 (21.8) .987 (25.1) 1.187 (30.1)201.132 (28.8)1.437 (36.5) 1.156 (29.4) 1.180 (30.0)1.125 (28.6).985 (25.0) 1.112 (28.2) 1.312 (33.3)221.257 (31.9)1.562 (39.7) 1.250 (31.8) 1.310 (33.3)1.252 (31.8)1.110 (28.2) 1.237 (31.4) 1.437 (36.5)241.382 (35.1)1.703 (43.3) 1.375 (34.9) 1.430 (36.3)1.377 (35.0)1.235 (31.4) 1.362 (34.6) 1.562 (39.7)HTHROUGH4 PL.125 (3.2).116 (2.9).125 (3.2).116 (2.9).125 (3.2).116 (2.9).125 (3.2).116 (2.9).125 (3.2).116 (2.9).125 (3.2).116 (2.9).125 (3.2).116 (2.9).125 (3.2).116 (2.9).154 (3.9).145 (3.7)RCOUPLINGTHREADUNEF-2APANELCUT-OUT.562-24 .572 (14.5).688-24 .706 (17.9).875-20 .885 (22.5).938-20 .946 (24.0)1.062-18 1.072 (27.2)1.188-18 1.197 (30.4)1.312-18 1.322 (33.6)1.438-18 1.447 (36.8)1.562-18 1.572 (39.9)

MIL-DTL-83723Connectors240-837AGlenair MIL-DTL-83723 Series III TypeConnector AdapterMIL-DTL-83723 Series IIIContact GenderPS - Pins, Plug SideSP - Sockets, Plug SideBFilter ConnectorProduct CodeInsert ArrangementPer MIL-STD-1669Filter TypeP - Pi CircuitC - C CircuitFlange Mounting StyleN - Not Applicable240 - 837 A P 14-04 PS P A N NShell StyleA - Connector AdapterConnector Class(See Table I)Capacitance(See Table II)Alternate Key PositionA, B, C, D, E, N = NormalA ThreadClass 2A2.250 (57.2)MAXA ThreadClass 2BInterfacial Seal(Class 1 & 2)RECEPTACLE ENDBPLUG ENDA - Connector Adapter© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-56E-Mail: sales@glenair.com

240-837AGlenair MIL-DTL-83723 Series III TypeConnector AdapterMIL-DTL-83723ConnectorsTABLE I: CONNECTOR CLASSSYM CLASS MATERIAL FINISH DESCRIPTIONM Environmental Aluminum Electroless NickelMT Environmental Aluminum Nickel Fluorocarbon polymer (Ni-PTFE)NF Environmental Aluminum Cadmium O.D. Over Electroless NickelP Environmental Stainless Steel Electro-Deposited NickelZN Environmental Aluminum Zinc-Nickel Over Electroless NickelH2 Hermetic Stainless Steel Electroless NickelBTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)X* 160,000 - 240,000 80,000 - 120,000Y* 80,000 - 120,000 40,000 - 60,000Z* 60,000 - 90,000 30,000 - 45,000A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300* Reduced DWV – Please consult factory.TABLE III: DIMENSIONSSHELLSIZEA THREADB DIA. MAX08 9/16 - 24 UNEF-2 .776 (19.7)10 11/16 - 24 UNEF-2 .906 (23.0)12 7/8 - 24 UNEF-2 1.078 (27.4)14 15/16 - 24 UNEF-2 1.141 (29.0)16 1 1/16 - 18 UNEF-2 1.266 (32.2)18 1 3/16 - 18 UNEF-2 1.375 (34.9)20 1 5/16 - 18 UNEF-2 1.510 (38.4)22 1 7/16 18 UNEF-2 1.625 (41.3)24 1 9/16 - 18 UNEF-2 1.760 (44.7)© 2008 Glenair, Inc.CAGE CODE 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-57E-Mail: sales@glenair.com

Too Fat to Fly?“PhenomenalPerformance;Itty-Bitty Package”Maybe. But Not Too BigTo Be Saved by a Mouse.One of the biggest challengesfacing designers of armoredcars, MRAP’s and other rapiddeployment combat vehicles is therequirement to build systems which aretransportable by air. In critical weightreductionapplications such as these,literally every ounce counts. That’s whyGlenair invented the Series 80 “MightyMouse,” an ultraminiature connectorwith all the performance characteristicsof standard Mil-Spec products, but justhalf the size and weight. The “MightyMouse” is being used in ground, air andsea applications where extreme levels ofweight reduction are not just an optionbut a necessity. So, if your system istoo fat to fly, consider a switch to theGlenair “Mighty Mouse”: PhenomenalPerformance, Itty-Bitty Package.1211 Air WayGlendale, California 91201-2497Telephone: 818-247-6000 · Facsimilie: 818-500-9912 · EMail: sales@glenair.comUnited States • United Kingdom • Germany • Niordic • France • Italy • Spain • Japanwww.glenair.com

Series 80 "Mighty Mouse"EMI/EMP Filter ConnectorsSeries 80Mighty MousePRODUCT FEATURES• Compact Weight-Saving Design with #23 Contacts• C and Pi Circuit Filters from 400 pF to 56000 pF• 3 Through 85 Contacts• Low-Pass Multilayer Ceramic Planar Array• PC Tail, Solder Cup and Crimp-Contact Versions• Fully Sealed with Thermally Conductive Epoxy• Space-Grade Bake-Out Processing Available• Threaded, Bayonet and Push-Pull VersionsUltra Small and Lightweight EMI/EMP Filter ConnectorsGlenair Series 80 "Mighty Mouse"Glenair’s filtered Series 80 “Mighty Mouse” connector family provide significant size andweight savings compared to larger “MS” connectors. The high density #23 contacts providealmost double the density of D38999. Designed to meet stringent aerospace performancerequirements, these connectors are offered with standard low pass Pi or C circuit filter arrays,or with customized filters to meet your specific needs. Thermally conductive epoxy protectsthe filter package from mechanical and heat stress and also provides a waterproof seal. Thesefiltered receptacles mate to Series 801 stub ACME threaded, Series 804 Push-Pull and Series805 Triple-Start, and are available in jam nut or square flange versions.CspecificationsCurrent Rating #23 5 AMPS, #20HD 7.5 A., #16 13 A., #12 23 A.Dielectric Withstanding Voltage 300 VDCInsulation Resistance5000 megohms minimum @ 200 VDCOperating Temperature -55° C. to +125° C.Shock 300 g.Vibration 37 g.Shielding Effectiveness50 dB minimum from 100MHz to 1000MHz.materials and finishesShells, Jam NutsContactsInsulatorsInterfacial Seal, O-rings, WireSealing GrommetAluminum alloy or stainless steelBeryllium copper alloy, 50 µInch gold platedLiquid crystal polymer (LCP)Fluorosilicone rubber© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-1E-Mail: sales@glenair.com

Series 80Mighty MouseSeries 80 “Mighty Mouse” Filter ConnectorNormal and Alternate Key Positionsand Panel Cut-Out DimensionsA — Normal Keying B — Alternate #1 C — Alternate #2 D — Alternate #3Plug Key PositionsReceptacle Key PositionsB° A° A° B°CA° B° A° B°A 150° 210° A 150° 210°B 75° 210° B 75° 210°C 95° 230° C 95° 230°D 140° 275° D 140° 275°PANEL CUTOUTSL FLAT M.362 (9.2).358 (9.1).385 (9.8).422 (10.7).418 (10.6).448 (11.4).553 (14.0).549 (13.9).573 (14.6).553 (14.0).549 (13.9).573 (14.6).611 (15.5).607 (15.4).635 (16.1).673 (17.1).669 (17.0).698 (17.7).861 (21.9).857 (21.8).885 (22.5)1.040 (26.4)1.036 (26.3)1.075 (27.3)1.113 (28.3)1.109 (28.2)1.135 (28.8)L FlatM© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-2E-Mail: sales@glenair.com

Series 80 “Mighty Mouse” Filter ConnectorContact ArrangementsSeries 80Mighty MouseThe contact arrangements on this page apply to filtered versions of Series 801, 804 and 805only. The size #23 contacts are rated at 5 amps current and accept #22 to #28 AWG wire.Mating Face View of Pin Insert, Socket Cavity Numbers are ReversedABC 4 31 2 1 26 7543731029184213931081764 5 12 11Series 801 5-3 6-1 6-4 6-7 7-1 7-10 8-13Series 804 5-3 6-1 6-4 6-7 7-1 7-10 8-13Series 805 Not Avail. 8-1 8-4 8-7 9-1 9-10 10-13Number of Contacts 3 1 4 7 1 10 13Contact Size #23 #16 #23 #23 #12 #23 #23C1 2431273148161319 173126411 91512181623 2125262412Series 801 9-4 9-19 10-26 13-2Series 804 9-4 9-19 10-26 12-2Series 805 11-4 11-19 12-26 15-2Number of Contacts 4 19 26 2Contact Size #16 #23 #23 #1291522451016282333 2937 341Series 801 13-37 16-55 17-85Series 804 12-37 14-55 15-85Series 805 15-37 18-55 19-85Number of Contacts 37 55 85Contact Size #23 #23 #232431399164652355 531 41411101928173825324047475766748185 8251220293948586775© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-3E-Mail: sales@glenair.com

Series 80Mighty MouseSeries 80 “Mighty Mouse” Filter ConnectorPrinted Circuit Board Layouts - Pin ConnectorsSeries 801, 804 and 805 Straight PC TailsContact Tail DiametersSize #23 contacts : .022 Maximum; Size #16 contacts: .064 Maximum; Size #12 contacts: .096 MaximumC.114.038.038.114.038.132.076.038 .038 .038.076.066.020.066.038 .038.0662 11 21 28A B31.1149 76 7 337 413 6.038C .038.1144 310 8.038.13210 11 12.066 5 4.076.0764 5.0435.038.038 .038 .038.114.076.066.038 .020.038.066.038 .038 .114.076.066 .038.1322 12112 .0768A B319 7Series 801 5-3 5-36(8)-4 .038 6-4 .038 .0386-7 6(8)-76 7 3 7(9)-10 7-10.076.066.0208(10)-1337 48-13 13 6Series 804 5-3 C.066.038 .038.06646-436-7 10.1977-10 82 110 11 1221128A B8-135 4319 76 .066 7 33Series 805 N/A 8-4 8-7 .0764 5.04357.1329-10 413 6.03810-13C4 3.076 10 810 11 12.066 5 45-36(8)-4.066.1526(8)-7 .0764 5.0435.0387(9)-108(10)-13.0885.190.114.076.1971 5-3 2 6(8)-4.076 6(8)-7 1 7(9)-10 .1528(10)-13 .1253 231 6 .132 48 71 2.132 74.197 1115 .066 912.152 8 .132.0885161318 20 19 16 12.190.066.1141917.038 .1142321.0885.076.066.1521 243.1521.12525 3 24 2.088526.076 .190.114 31 64.12571 2.132 74 1181 2.07615 19 .152.1259(11)-49(11)-191283 2310(12)-2612(13)(15)-2161 613184716 1220 191 2.132 7 .066 19 4 11817 159.038 .1142321.0885 4312825 24 .0761626.1251318 16 1220 19.066 1917.038 .1142321.342.0885.2664 9(11)-4 325 24Series 801 9(11)-19 .266.152 9-4 9-19 26 10(12)-26 .07610-26 .190.125 12(13)(15)-212-2.190Series 804 .114 9-4 .1149-19 10-26 .11413-29(11)-49(11)-1910(12)-26.076.038 12(13)(15)-2Series 805 11-4 .03811-19 12-26 15-241.038.3423 111 .26654 .152 1 9.2664 19 .1901295.190162820.114.2641510 .132 .1971038.132.197.263.114.34224 .114.266.2661729 .132.152.19822 .076.0381631 .0382547.190.1903928 .0382339325741.11448113329 .066.114.114463 140 .0666641.0663734741967 58 5.076.038.03812529447.038 95 1628.197 55538175 20.264 .33010151038.132.132.197.2634132411117585 8229 .132 .1984 221 912(13)(15)-37 16.076 314 192547123995 28 .076282316.197.066.152 3932572048 .264 .330101510383329.132.152.2284640.132.197.2632417.06666 29 .132 .19822163147.228.06637347439 67 58 5225472823393257555381 .30448753329 .0664640 .06666 82 .06637 12(13)(15)-373414(16)(18)-55.07674.07615(17)(19)-8567 58 524755 .152 53817585 .152 82.22812(13)(15)-37.076.076.228.152.152 .304.22814(16)(18)-55.22815(17)(19)-85.304Series 801 13-37 14(16)(18)-55 16-55 15(17)(19)-85 17-85Series 804 12-37 14-55 15-85Series 805 15-37 18-55 19-85© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-4E-Mail: sales@glenair.com

Series 80 “Mighty Mouse” Filter ConnectorPrinted Circuit Board Layouts - Socket ConnectorsSeries 801, 804 and 805 Straight PC TailsSeries 80Mighty MouseContact Tail DiametersSize #23 contacts : .022 Maximum; Size #16 contacts: .064 Maximum; Size #12 contacts: .096 Maximum.114.038.038.114.038.132.076.038 .038 .038.076.066.020.066.038 .038.0661 22 12 18B A1 3 .1147 93 7 66 13 3.03847C .038.114.038.1323 412 11 104.0665.076 8 10 .114.0765 4.0435.038.038.038 .038.076.066.038 .020.038.066.038 .038.114.076.066 .038.1321 22 12 18A.076B1 37 95-36(8)-4 .038 .038 .0386(8)-7 7 6.076.06636 13 3Series 801.020 5-3 6-4 6-7 4 7(9)-10 78(10)-13C.066.038 .038 7-10 8-13.0661 23 412 11 102 12 18Series 804 B 5-3A6-4 6-7 .197 4 51 8 7-10 38-13 7 9.066 3 7 66.07651334Series .0435 8054N/A 7C8-4 .0388-7 .1329-10 10-133 412 11 104 5 .076 8 10.0665-36(8)-4.066.152 6(8)-7.0765 4.0435.0387(9)-10.0885.1908(10)-13.114.076.197.0761.152.1252 5-3 1 6(8)-46(8)-77(9)-1012 38(10)-13.13234621.132 4.19777 812 .0669118 .15212.132.08851315.1901616 19 18.066.114201719 .066.038 .1142123.0885.0761.152.125213 4.152124 2 25 3.088526.076 .190.114.12534621.132 477 8.07612 9111.152.125219(11)-48 19(11)-19122 310(12)-2612(13)(15)-213 346161618 1521.132 .06641777 198201912 911 .038 .1142123.0885 3 481224 251326.076.12516161519.06620 181719.038 .1142123.342.0885.2663 9(11)-4424 259(11)-19 .26626 10(12)-26 .076.125.152.190 12(13)(15)-2Series 801 9-4 9-19 10-26 12-2.190Series 804 .114.1149(11)-4 9-4 .114 9(11)-199-1910(12)-2610-26.038 12(13)(15)-2 13-2Series 805 .076 11-4 .03811-19 12-261 .342 4 15-2.038135 .26611.266.152144912 .19019592028 .26415 .132 .19710.190.342.1141610.132.197.263 .11417.114.266.2662429 .03838 .132.152.19816 .076.19022.190 25 .038313947.038 232832394814.114.114.114572933 .06640 13 46 .06658 .038 511.07666 .06634 14.0383747495267121974.038 59.197535514758128 .264 .33010161015 .132.132.197.26317132429511823885 .132 .19841611222425912(13)(15)-37.076313919475920 .0762328 .197324828 .264 .33010165715 .066.15239102933.132294058 .152 3866.132.2284622.066 .132.197.2631724.228 .0661625394734374731526774232832485355 3975 .304 81572933 .0664046 .066588266 .0663412(13)(15)-373747 .076 14(16)(18)-55 5267.076 15(17)(19)-85 74537581.152 5582 .152 8512(13)(15)-37.076.228.076 .228.152.152 .304.228.22814(16)(18)-5515(17)(19)-85 .30414(16)(18)-55Series 801 13-37 16-5515(17)(19)-8517-85Series 804 12-37 14-55 15-85Series 805 15-37 18-55 19-85C© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-5E-Mail: sales@glenair.com

Series 80Mighty Mouse240-801 "Mighty Mouse" Filter ConnectorHeavy Duty Double-Start CouplingMaster How to Order • Part Number BreakdownSeries 801"Mighty Mouse"Insert Arrangement(See Table III)Capacitance(See Table II)FilterConnectorProductCodeMaterialandFinish(See Table I)ContactGenderP - PinS - SocketC240 - 801- 02 M 6-7 P S P A AShell Style01 - Square Flange Receptaclewith Solder Cup Contacts andBanding Platform02 - Square Flange Receptaclewith PCB or Solder Cup Contacts07 - Jam Nut Receptacle withSolder Cup Contacts andBanding Platform08 - Jam Nut Receptacle withPCB or Solder Cup ContactsTABLE I: MATERIALS AND FINISHSYM MATERIAL FINISH DESCRIPTIONM Aluminum Electroless NickelMTAluminumNF AluminumPStainlessSteelZN AluminumNi-PTFE 1000Hour Grey TM (NickelFluorocarbon Polymer)Cadmium O.D. OverElectroless NickelElectro-Deposited NickelZinc-Nickel OverElectroless NickelTerminationP - PC Tail (Shell Styles02 and 08 Only)S - Solder CupFilter TypeP - Pi CircuitC - C CircuitTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300Alternate Key PositionA, B, C, D(A = Normal)See Page C-2TABLE IIIINSERT ARANGEMENTSArr. No.ContactSizeContactQty.5-3 23 36-1 16 16-4 23 46-7 23 77-1 12 17-10 23 108-13 23 139-4 16 49-19 23 1910-26 23 2613-2 12 213-37 23 3716-55 23 5517-85 23 85© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-6E-Mail: sales@glenair.com

240-801-01 and -07"Mighty Mouse" Filter ConnectorHeavy Duty Double-Start CouplingBanding Platform Versions with Solder Cup ContactsSeries 80Mighty Mouse01 - SquareFlangeReceptaclewith SolderCup Contactsand BandingPlatform4x F Through E BSC.005 (.13)TYPD SQTYPMaster KeywayMaster KeywayCG1.200 (30.5)Max..060(1.5)A ThreadRed Full MateIndicator Band1.36 (34.5) Max.060(1.5).430 (10.9) Max.B.430 (10.9) Max..100 (2.5) Max.Panel ThicknessC07 - Jam NutReceptaclewith SolderCup Contactsand BandingPlatformJ FlatH FlatTYPA ThreadRed Full MateIndicator BandK ThreadBSHELLSIZETABLE I: DIMENSIONSA THREAD B C D SQ E BSC F HOLES G H FLAT J FLAT K THREAD5 .3125- .05P- .1L -2A .365 (9.3) .680 (17.3) .530 (13.5) .363 (9.2).575 (14.6) .545 (13.8) .350 (8.9) .3750-28 UN-2A6 .3750- .05P- .1L -2A .409 (10.4) .750 (19.1) .590 (15.0) .423 (10.7) .635 (16.1) .595 (15.1) .410 (10.4) .4375-28 UNEF-2A7 .4375- .05P- .1L -2A .500 (12.7) .850 (21.6) .650 (16.5) .483 (12.3).096 (2.4).091 (2.3).755 (19.2) .723 (18.4) .536 (13.6) .5625-32 UN-2A8 .5000- .05P- .1L -2A .522 (13.3) .938 (23.8) .712 (18.1) .545 (13.8) .755 (19.2) .723 (18.4) .536 (13.6) .5625-32 UN-2A9 .5625- .05P- .1L -2A .558 (14.2) 1.125 (28.6) .850 (21.6) .607 (15.4) .830 (21.1) .790 (20.1) .596 (15.1) .6250-28 UN-2A10 .6250- .05P- .1L -2A .652 (16.6) 1.188 (30.2) .890 (22.6) .670 (17.0).890 (22.6) .855 (21.7) .658 (16.7) .6875-28 UN-2A13 .8125- .1P- .2L -2A .707 (18.0) 1.375 (34.9) 1.030 (26.2) .812 (20.6) .130 (3.3).126 (3.2)1.078 (27.4) 1.044 (26.5) .845 (21.5) .875-28 UN-2A16 1.000- .1P- .2L -2A .871 (22.1) 1.625 (41.3) 1.219 (31.0) .981 (24.9) 1.264 (32.1) 1.230 (31.2) 1.022 (26.0) 1.0625-20 UN-2A17 1.062- .1P- .2L -2A .965 (24.5) 1.700 (43.2) 1.280 (32.5) 1.060 (26.9) 1.325 (33.7) 1.290 (32.8) 1.096 (27.8) 1.125-28 UN-2A© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-7E-Mail: sales@glenair.com

Series 80Mighty Mouse240-801-02 and -08"Mighty Mouse" Filter ConnectorHeavy Duty Double-Start CouplingPrinted Circuit Board Versions with PCB or Solder Cup ContactsC02 - Square FlangeReceptacle withPrinted Circuit BoardContacts08 - Jam NutReceptacle withPrinted Circuit BoardContacts4x F Through E BSC.005 (.13)TYPD SQTYPMMaster KeywayJ FlatH FlatTYPMaster KeywayCGSee Note 51.200 (30.5)Max.060(1.5)A ThreadRed Full MateIndicator Band 1.36 (34.5)MaxA ThreadRed Full MateIndicator BandK Thread.060(1.5).430 (10.9) Max.125 +/- .015(31.8 +/- .4)PC Tail.022 / .018( .6 / .5)Solder Cup.025 (.6).430 (10.9) Max.100 (2.5) MaxPanel Thickness(31.8 +/- .4)PC TailBB.022 / .018( .6 / .5)Solder Cup.025 (.6)TABLE I: DIMENSIONSSHELLSIZEA THREAD B C D SQ5 .3125- .05P- .1L -2A .245(6.2)6 .3750- .05P- .1L -2A .330(8.4)7 .4375- .05P- .1L -2A .442(11.2)8 .5000- .05P- .1L -2A .493(12.5)9 .5625- .05P- .1L -2A .551(14.0)10 .6250- .05P- .1L -2A .620(15.7)13 .8125- .1P- .2L -2A .703(17.9)16 1.000- .1P- .2L -2A .863(21.9)17 1.0625- .1P- .2L -2A .912(23.2).680(17.3).750(19.1).850(21.6).938(23.8)1.125(28.6)1.188(30.2)1.375(34.9)1.625(41.3)1.700(43.2)EBSC F HOLES G HFLAT.530(13.5).363(9.2).096 (2.4).091 (2.3).590 .423 .096 (2.4)(15.0) (10.7) .091 (2.3).650 .483 .096 (2.4)(16.5) (12.3) .091 (2.3).712 .545 .096 (2.4)(18.1) (13.8) .091 (2.3).850 .607 .130 (3.3)(21.6) (15.4) .126 (3.2).890 .670 .130 (3.3)(22.6) (17.0) .126 (3.2)1.030 .812 .130 (3.3)(26.2) (20.6) .126 (3.2)1.219 .981 .130 (3.3)(31.0) (24.9) .126 (3.2)1.280 1.060 .130 (3.3)(32.5) (26.9) .126 (3.2).575(14.6).635(16.1).755(19.2).755(19.2).830(21.1).890(22.6)1.078(27.4)1.264(32.1)1.325(33.7).545(13.8).595(15.1).723(18.4).723(18.4).790(20.1).855(21.7)1.044(26.5)1.230(31.2)1.290(32.8)JFLAT.350(8.9).410(10.4).536(13.6).536(13.6).596(15.1).658(16.7).845(21.5)1.022(26.0)1.096(27.8)K THREAD.3750-28 UN-2A.4375-28 UNEF-2A.5625-32 UN-2A.5625-32 UN-2A.6250-28 UN-2A.6875-28 UN-2A.875-28 UN-2A1.0625-20 UN-2A1.125-28 UN-2A© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-8E-Mail: sales@glenair.com

Series 240-804 "Mighty Mouse" Filter ConnectorPush-Pull Quick DisconnectMaster How to Order • Part Number BreakdownSeries 80Mighty MouseSeries 804"Mighty Mouse"Push-PullInsert Arrangement(See Table III)Capacitance(See Table II)FilterConnectorProductCodeMaterialandFinish(See Table I)ContactGenderP - PinS - Socket240 - 804- 07 M 6-7 P S P A ACShell Style07 - Jam Nut Receptacle, RearMount with PCB Stand-Off08 - Jam Nut Receptacle, FrontMount with PCB Stand-OffTerminationP - PC TailS - Solder CupAlternate Key PositionA, B, C, D(A = Normal)See Page C-2(Omit for Single Master Key)TABLE I: MATERIALS AND FINISHSYM MATERIAL FINISH DESCRIPTIONM Aluminum Electroless NickelMTAluminumNF AluminumPStainlessSteelZN AluminumNi-PTFE 1000Hour Grey TM (NickelFluorocarbon Polymer)Cadmium O.D. OverElectroless NickelElectro-Deposited NickelZinc-Nickel OverElectroless NickelFilter TypeP - Pi CircuitC - C CircuitTABLE II: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300TABLE IIIINSERT ARANGEMENTSArr. No.ContactSizeContactQty.5-3 23 36-1 16 16-4 23 46-7 23 77-1 12 17-10 23 108-13 23 139-4 16 49-19 23 1910-26 23 2612-2 12 212-37 23 3714-55 23 5515-85 23 85© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-9E-Mail: sales@glenair.com

Series 80Mighty Mouse240-804-07 and -08"Mighty Mouse" Filter ConnectorPush-Pull Quick DisconnectPrinted Circuit Board Versions with PCB or Solder Cup Contacts1.41 (35.8) MaxKeyway.275(7.0) .125 (3.2) MinDFlat.022(.6).018(.5)E FCBCA Thread.025 (.6)Medium RaisedDiamond Knurl07 - Jam Nut Receptacle, RearMount, with PCB Stand-Off.125 MaxPanel ThicknessKeyway1.41 (35.8) MaxG.125 (3.2) Min3 17 412816131917.022(.6).018(.5)E08 - Jam NutReceptacle,Front Mount,with PCBStand-Off.025 (.6)K Thread.125 (3.2) MaxPanel Thickness© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-10E-Mail: sales@glenair.com

240-804-07 and -08"Mighty Mouse" Filter ConnectorPush-Pull Quick DisconnectPrinted Circuit Board Versions with PCB or Solder Cup ContactsSeries 80Mighty MouseNRHM FlatP Flat481371213161719JFlatCRecomended Panel Cut Out forRear Mount Jam Nut ReceptacleRecomended Panel Cut Out forFront Mount Jam Nut ReceptacleSHELLSIZETABLE II: DIMENSIONSA THREAD B C D FLAT E F G H J FLAT K THREAD M FLAT N P FLAT R5 .4375-32 UN-2A .790(20.1)6 .5000-32 UN-2A .830(21.1)7 .6250-28 UN-2A .910(23.1)8 .6250-28 UN-2A .955(24.3)9 .6875-32 UN-2A 1.000(25.4)10 .7500-28 UN-2A 1.085(27.6)12 .8750-28 UN-2A 1.180(30.0)14 1.0000-28 UN-2A 1.325(33.7)15 1.125-28 UN-2A 1.390(35.3).660(16.8).720(18.3).835(21.2).836(21.2).900(22.9).950(24.1)1.080(27.4)1.210(30.7)1.280(32.5).415(10.5).467(11.9).594(15.1).594(15.1).655(16.6).721(18.3).843(21.4).968(24.6)1.029(26.1).348(8.8).413(10.5).461(11.7).493(12.5).551(14.0).655(16.6).703(17.9).863(21.9).912(23.2).450(11.4).520(13.2).580(14.7).603(15.3).695(17.7).735(18.7).880(22.4)1.010(25.7)1.060(26.9).830(21.1).885(22.5).995(25.3).995(25.3)1.075(27.3)1.140(29.0)1.340(34.0)1.390(35.3)1.450(36.8)0.730(18.5).780(19.8).920(23.4).920(23.4).970(24.6)1.040(26.4)1.230(31.2)1.280(32.5)1.340(34.0).470.5000-32 UN-2A(11.9).530(13.5).663(16.8).663(16.8).720(18.3).788(20.0).970(24.6)1.020(25.9)1.093(27.8).427 (10.8).423 (10.7).5625-28 UN-2A.479 (12.2).475 (12.1).6875-28 UN-2A.606 (15.4).601 (15.3).6875-28 UN-2A.606 (15.4).602 (15.3).7500-28 UN-2A.667 (16.9).663 (16.8).8125-28 UN-2A.734 (18.6).729 (18.5)1.000-28 UN-2A.855 (21.7).851 (21.6)1.062-20 UN-2A.980 (24.9).976 (24.8)1.125-28 UN-2A1.041 (26.4)1.037 (26.3).448(11.4).482 (12.2).478 (12.1).510(13.0).510 .542 (13.8) .575(13.0) .538 (13.7) (14.6).635 .676 (17.2) .698(16.1) .671 (17.0) (17.7).635 .676 (17.2) .698(16.1) .671 (17.0) (17.7).695 .732 (18.6) .760(17.7) .728 (18.5) (19.3).760 .801 (20.3) .822(19.3) .796 (20.2) (20.9).885 .982 (24.9) 1.010(22.5) .978 (24.8) (25.7)1.010 1.032 (26.2) 1.075(25.7) 1.028 (26.1) (27.3)1.070 1.015 (25.8) 1.135(27.2) 1.011 (25.7) (28.8)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-11E-Mail: sales@glenair.com

Series 80Mighty Mouse240-805 "Mighty Mouse" Filter ConnectorTriple-Start ACME Coupling ThreadsMaster How to Order • Part Number BreakdownSeries 805Triple-StartInsert Arrangement(See Table III)FilterConnectorProductCodeConnectorMaterialand Finish(See Table I)Contact GenderP - PinS - SocketCapacitance Code(See Table II)C240 - 805 - 02 M 8-7 P S P A AShell Style01 - Square Flange Receptaclewith Solder Cup Contacts and Band Platform02 - Square Flange Receptaclewith Printed Circuit Board Contacts07 - Jam Nut Receptacle with Solder CupContacts and Band Platform08 - Jam Nut Receptaclewith Printed Circuit Board ContactsContact TerminationS - Solder Cup(Shell Style 01 and 07 only)P - PC Tail(Shell Style 02 and 08 only)Filter TypeP - Pi C - CAlternate KeyPositionA, B, C, D(A = Normal)TABLE I: MATERIALS AND FINISHSYM MATERIAL FINISH DESCRIPTIONM Aluminum Electroless NickelMTAluminumNF AluminumPStainlessSteelZN AluminumNi-PTFE 1000Hour Grey TM (NickelFluorocarbon Polymer)Cadmium O.D. OverElectroless NickelElectro-Deposited NickelZinc-Nickel OverElectroless NickelTABLE II: CAPACITANCE CODECODE PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300TABLE IIIINSERT ARANGEMENTSArr. No.ContactSizeContactQty.8-1 16 18-4 23 48-7 23 79-1 12 19-10 23 1010-13 23 1311-4 16 411-19 23 1912-26 23 2615-2 12 215-37 23 3718-55 23 5519-85 23 85© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-12E-Mail: sales@glenair.com

240-805-07 and -08"Mighty Mouse" Filter ConnectorTriple-Start ACME Coupling ThreadsJam Nut Receptacle VersionsSeries 80Mighty MouseMASTERKEYWAYDTHREAD1.360 1.200 (34.54 (30.48))MAX.430(10.92)MAX.060(1.52)DTHREAD.060(1.52)1.360 1.200 (34.54 (30.48))MAX.430(10.92)MAX.125 (3.18) MIN.B FLATø Eø Eø Gø AC FLATTYPFTHREADRED FULL MATEINDICATOR BAND.100 MAXFPANEL THICKNESSTHREAD07 - Jam NutSolder Cup with Band Platform.025(0.64).100 MAXPANEL THICKNESS08 - Jam NutPrinted Circuit Board ContactsCdimensionsShellSizeØ A B CØ EIn. mm. In. mm. In. mm. D Threads In. mm.F Threads8 .760 19.30 .535 13.59 .730 18.54 .5000-.1P-.3L-TS-2A .413 10.49 .5625-28 UN-2A9 .880 22.35 .661 16.79 .850 21.59 .5625-.1P-.3L-TS-2A .500 12.70 .6875-28 UN-2A10 .880 22.35 .661 16.79 .850 21.59 .6250-.1P-.3L-TS-2A .530 13.46 .6875-28 UN-2A11 .955 24.26 .721 18.31 .925 23.50 .6875-.1P-.3L-TS-2A .610 15.49 .7500-28 UN-2A12 1.060 26.92 .784 19.91 1.035 26.29 .7500-.1P-.3L-TS-2A .655 16.51 .8125-28 UN-2A15 1.203 30.56 .970 24.64 1.173 29.79 .9375-.1P-.3L-TS-2A .746 18.95 1.000-28 UN-2A18 1.389 35.28 1.147 29.13 1.359 34.52 1.1250-.1P-.3L-TS-2A .871 22.12 1.187-28 UN-2A19 1.450 36.83 1.221 31.01 1.420 36.07 1.1870-.1P-.3L-TS-2A .972 24.67 1.250-28 UN-2A23 1.705 43.31 1.470 37.34 1.675 42.55 1.4375-.1P-.3L-TS-2A 1.876 30.12 1.500-28 UN-2AØ GTail Dia.#23.018/.022(0.46/0.56)#20.024/.028(0.61/0.71)#16.060/.064(1.52/1.63)#12.092/.096(2.34/2.44AFLATø Bpanel cutoutsShellSizeIn.± .002AØ Bmm.± 0.05 In. mm.8 .543 13.79 .577/.567 14.7/14.49 .669 16.99 .703/.695 17.9/17.610 .669 16.99 .703/.695 17.9/17.611 .729 18.51 .765/.755 19.4/19.212 .792 20.12 .827/.817 21.0/20.815 .978 24.84 1.015/1.005 25.8/25.518 1.155 29.34 1.203/1.193 30.6/30.319 1.231 31.27 1.265/1.255 32.1/31.923 1.480 37.59 1.515/1.505 38.5/38.2© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-13E-Mail: sales@glenair.com

Series 80Mighty Mouse240-805-01 and -02“Mighty Mouse” Filter ConnectorTriple-Start ACME Coupling ThreadsSquare Flange Receptacle Versions4X ø Dø.005 MB BSCTYPMASTERKEYWAYø C1.200 (30.48)MAX.430(10.92).060 MAX(1.52)ETHREAD1.200 (30.48) MAX.060(1.52).430(10.92)MAX.125 (3.18) MIN.CA SQTYPETHREADRED FULL MATEINDICATOR BANDø F01 - Square Flange MountSolder Cup with BandPlatform.025(0.64)ø Fø G02 - Square Flange Mountwith Printed Circuit BoardContactsdimensionsShellSizeA B ØC In.ØDmm.Ø FIn. mm. In. mm. In. mm. ± .003 ± .08 E Threads In. mm.8 .850 21.59 .660 16.76 1.150 29.21 .094 2.39 .5000-.1P-.3L-TS-2A .413 10.499 .913 23.19 .723 18.36 1.230 31.24 .094 2.39 .5625-.1P-.3L-TS-2A .500 12.7010 .975 24.77 .785 19.94 1.330 33.78 .094 2.39 .6250-.1P-.3L-TS-2A .530 13.4611 1.039 26.39 .848 21.54 1.410 35.81 .094 2.39 .6875-.1P-.3L-TS-2A .610 15.4912 1.099 27.91 .909 23.09 1.500 38.10 .094 2.39 .7500-.1P-.3L-TS-2A .655 16.5115 1.288 32.74 1.058 26.87 1.750 44.45 .128 3.25 .9375-.1P-.3L-TS-2A .746 18.9518 1.475 37.47 1.255 31.88 2.000 50.80 .128 3.25 1.1250-.1P-.3L-TS-2A .871 22.1219 1.537 39.04 1.327 33.71 2.094 53.19 .128 3.25 1.1870-.1P-.3L-TS-2A .972 24.6723 1.787 45.39 1.570 39.88 2.470 61.98 .128 3.25 1.435-.1P-.3L-TS-2A 1.186 30.12Ø GTail Dia.#23.018/.022(0.46/0.56)#20.024/.028(0.61/0.71)#16.060/.064(1.52/1.63)#12.092/.096(2.34/2.44© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comC-14E-Mail: sales@glenair.com

MIL-DTL-83513 TypeMicro-D SubminiatureFilter ConnectorsMicro-DConnectorsPRODUCT FEATURESGlenair’s Filtered Solder Cup Micro-D's provide EMI solutionsin a miniaturized M83513 type connector. These connectorsfeature ceramic capacitor planar arrays and ferrite inductors.Solder cups accept #26 thru #30 AWG wire, or specify oversizecontacts for #24 gage wire.Choose Pi or C Filter Arrays in seven filter classes andeight layouts. Glenair filtered Micro-D connectors complywith applicable MIL-DTL-83513 requirements and are 100%intermateable with standard connectors.Choose 9 to 67 Contacts, with standard cadmium or nickelplating on the connector housing or choose optional finishessuch as gold or chem film. Sometimes a standard part justwon't do. For these situations Glenair welcomes your customrequirements. Whatever the need, we can propose a solutionand back it up with rapid design and prototyping.The World's Only Short Lead-Time Source for FilteredMicro-D Subminiature ConnectorsDFilter With Solder Cup ContactsAvailable in 9,15, 21, 25, 31, and 37 contacts, these aluminum shell filtered Micro-Dconnectors are backfilled with thermally conductive epoxy to allow soldering without heatdamage to sensitive filter elements.Pre-Wired Pigtail Filter ConnectorThese pre-wired connectors save labor and provide added reliability. Choose from 9 to 37contacts. Mates to standard M83513 type Micro-D connectors.Vertical Printed Circuit Board Micro-D FilterFeaturing a one piece aluminum shell, these thru-hole board mount connectors can be orderedwith jackposts or with jackscrews for flex-to-board applications. PC terminals are .018" (0.46 mm.)diameter and are spaced .050" (1.27 mm.) apart.90° Printed Circuit Board Micro-D FilterThese right angle thru-hole headers replicate the popular "CBR" .100" by .100" terminal spacing.Filter elements are housed in a wider shell. A molded rear tray withstands soldering heatand is impervoius to chemicals. Terminals are encapsulated in epoxy.In-Line Filter AdapterAvoid costly redesign with pin/socket feed-thru adapters. These adapters plug into anystandard M83513 connector. Simply unplug your existing cable, install the filter adapter andreconnect the cable.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-1E-Mail: sales@glenair.com

Micro-DConnectorsMicro-D Filter ConnectorsContact Arrangements, Materialsand Performance SpecificationsContact Arrangements (Face View Pin Connector)1 2 3 4 51 2 3 4 5 6 78 1 2 3 4 5 6 7 8 9 10 116 7 8 99 10 11 12 13 14 1512 13 14 15 16 17 18 19 20 219 Contacts 15 Contacts 21 Contacts1 2 3 4 5 6 7 8 9 10 11 12 131 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1614 15 16 17 18 19 20 21 22 23 24 2517 18 19 20 21 22 23 24 25 26 27 28 29 30 3125 Contacts 31 ContactsCONTACT SPACINGD1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1920 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 3737 Contacts.050(1.27).0433(1.01).050(1.27)performance specificationsCurrent RatingDielectric WithstandingVoltageWorking Voltage3 AMP250 VDC100 VDCInsulation Resistance 5000 Megohms MinimumContact Resistance 8 Milliohms MaximumLow Level ContactResistance32 Milliohms MaximumMagnetic Permeability 2 µ MaximumOperating Temperature -55° C. to +125° C.Shock 50 g.Vibration 20 g.Mating Force(10 Ounces) X (# of Contacts)Capacitance andAttenuation(See Table on Preceding Page)For additional performance requirements, please refer toMIL‐DTL‐83513ConnectorShell(AluminumAlloy 6061)materials and finishesPlating Code 1: Cadmium With Yellow ChromatePlating Code 2: Electroless NickelPlating Code 33: Ni-PTFE 1000 Hour Grey TMPlating Code 5: GoldPlating Code 6: Chem FilmInsulator Liquid Crystal Polymer (LCP)Seals Flourosilicone Rubber, BluePin ContactBeryllium Copper With 50 Microinches Gold overNickel PlatingCopper Alloy With 50 Microinches Gold OverSocket ContactNickel PlatingHardware 300 Series Stainless SteelPCB Terminals Gold-Plated Copper Alloy, Solder DippedCapacitors Planar Ceramic ArrayInductors FerriteEMI GroundSpringBeryllium Copper, Gold PlatedEncapsulantThermally Conductive Epoxy© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-2E-Mail: sales@glenair.com

Micro-D Filter ConnectorsFilter Classes and PerformanceMicro-DConnectorsCINSERTION LOSSInsertion Loss, dB Minimum, 25°CFrequency1 MHz10 MHz100 MHz500 -1000 MHzA6244150B5233949C3163546D–82841E–42134F––1023G––517CAPACITANCEFilter ClassCapacitanceA19000 – 28000 [pF]B16000 – 22500 [pF]C9000 – 16500 [pF]D4000 – 6000 [pF]E1650 – 2500 [pF]F400 – 650 [pF]G200 – 300 [pF]PiDINSERTION LOSSInsertion Loss, dB Minimum, 25°CFrequency1 MHz10 MHz100 MHz500 - 1000 MHzA10406266B8356062C5255760D1145058E–84052F–21532G–0.81322CAPACITANCEFilter ClassCapacitanceA38000 – 56000 [pF]B32000 – 45000 [pF]C18000 – 33000 [pF]D8000 – 12000 [pF]E3300 – 5000 [pF]F800 – 1300 [pF]G400 – 600 [pF]Contact factory for other configurations.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-3E-Mail: sales@glenair.com

Micro-DConnectorsMicro-D Filter ConnectorsRecommended Panel CutoutsCAB.010(0.25)MAX RADIUS4 PLACESFAB.062 (1.6)RADIUS4 PLACESDEFULL RADIUSTYP. 2 PLCS.Front Panel MountingFULL RADIUSTYP. 2 PLCS.Rear Panel Mountingmetal shell mwdm connectorsDLayoutIn.± .003A B C D E Fmm.± 0.08In.± .002mm.± 0.05In.± .002mm.± 0.05In.± .002mm.± 0.05In.± .005mm.± 0.13In.± .0029 .565 14.35 .410 10.41 .091 2.31 .290 7.37 .256 6.50 .126 3.2015 .715 18.16 .560 14.22 .091 2.31 .290 7.37 .256 6.50 .126 3.2021 .865 21.97 .710 18.03 .091 2.31 .290 7.37 .256 6.50 .126 3.2025 .965 24.51 .810 20.57 .091 2.31 .290 7.37 .256 6.50 .126 3.2031 1.115 28.32 .960 24.38 .091 2.31 .290 7.37 .256 6.50 .126 3.2037 1.265 32.13 1.110 28.19 .091 2.31 .290 7.37 .256 6.50 .126 3.20mm.± 0.05Note: For front panel mounting, filtered connectors require a larger cut-outthan standard MIL-DTL-83513 connectors.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-4E-Mail: sales@glenair.com

MIL-STD-681 Color Code ChartMicro-DConnectorsPINNO.MIL-STD-681NUMBERmil-std-681 color code chart FOR MICRO-D CONNECTORSBaseColorFirstStripeSecondStripePINNO.MIL-STD-681NO.BaseColorFirstStripeSecondStripeThirdStripe1 0 BLK 51 957 WHT GRN VIO2 1 BRN 52 958 WHT GRN GRY3 2 RED 53 967 WHT BLU VIO4 3 ORN 54 968 WHT BLU GRY5 4 YEL 55 978 WHT VIO GRY6 5 GRN 56 9012 WHT BLK BRN RED7 6 BLU 57 9013 WHT BLK BRN ORN8 7 VIO 58 9014 WHT BLK BRN YEL9 8 GRY 59 9015 WHT BLK BRN GRN10 9 WHT 60 9016 WHT BLK BRN BLU11 90 WHT BLK 61 9017 WHT BLK BRN VIO12 91 WHT BRN 62 9018 WHT BLK BRN GRY13 92 WHT RED 63 9023 WHT BLK RED ORN14 93 WHT ORN 64 9024 WHT BLK RED YEL15 94 WHT YEL 65 9025 WHT BLK RED GRN16 95 WHT GRN 66 9026 WHT BLK RED BLU17 96 WHT BLU 67 9027 WHT BLK RED VIO18 97 WHT VIO 68 9028 WHT BLK RED GRY19 98 WHT GRY 69 9034 WHT BLK ORN YEL20 901 WHT BLK BRN 70 9035 WHT BLK ORN GRN21 902 WHT BLK RED 71 9036 WHT BLK ORN BLU22 903 WHT BLK ORN 72 9037 WHT BLK ORN VIO23 904 WHT BLK YEL 73 9038 WHT BLK ORN GRY24 905 WHT BLK GRN 74 9045 WHT BLK YEL GRN25 906 WHT BLK BLU 75 9046 WHT BLK YEL BLU26 907 WHT BLK VIO 76 9047 WHT BLK YEL VIO27 908 WHT BLK GRY 77 9048 WHT BLK YEL GRY28 912 WHT BRN RED 78 9056 WHT BLK GRN BLU29 913 WHT BRN ORN 79 9057 WHT BLK GRN VIO30 914 WHT BRN YEL 80 9058 WHT BLK GRN GRY31 915 WHT BRN GRN 81 9067 WHT BLK BLU VIO32 916 WHT BRN BLU 82 9068 WHT BLK BLU GRY33 917 WHT BRN VIO 83 9078 WHT BLK VIO GRY34 918 WHT BRN GRY 84 9123 WHT BRN RED ORN35 923 WHT RED ORN 85 9124 WHT BRN RED YEL36 924 WHT RED YEL 86 9125 WHT BRN RED GRN37 925 WHT RED GRN 87 9126 WHT BRN RED BLU38 926 WHT RED BLU 88 9127 WHT BRN RED VIO39 927 WHT RED VIO 89 9128 WHT BRN RED GRY40 928 WHT RED GRY 90 9134 WHT BRN ORN YEL41 934 WHT ORN YEL 91 9135 WHT BRN ORN GRN42 935 WHT ORN GRN 92 9136 WHT BRN ORN BLU43 936 WHT ORN BLU 93 9137 WHT BRN ORN VIO44 937 WHT ORN VIO 94 9138 WHT BRN ORN GRY45 938 WHT ORN GRY 95 9145 WHT BRN YEL GRN46 945 WHT YEL GRN 96 9146 WHT BRN YEL BLU47 946 WHT YEL BLU 97 9147 WHT BRN YEL VIO48 947 WHT YEL VIO 98 9148 WHT BRN YEL GRY49 948 WHT YEL GRY 99 9156 WHT BRN GRN BLU50 956 WHT GRN BLU 100 9157 WHT BRN GRN VIOD© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-5E-Mail: sales@glenair.com

Micro-DConnectors240-030Micro-D Filter ConnectorsSolder CupMicro-D Solder CupBasic Part NumberFilter ConnectorProduct CodeShell Finish(See Table I)Contact TypeP - PinS - SocketFilter ClassA, B, C, D, E, F or G(See Table III)240 - 030 - 2 - 25 P P B PNumber of Contacts9, 15, 21, 25, 31, 37Filter TypeP - Pi CircuitC - C CircuitHardware(See Table II)ABCPI FILTER .800 (20.32) MAX.C FILTER .500 .600 (12.70) (15.24) MAX.DEDF.096/.088 (2.43/2.23) DIA..125 (3.18)MAX,.093 ± .005(2.36 ± 0.13)H.287 (7.3).322 (8.18) MaxGlenair’s Filtered Solder Cup Micro-D's provide EMIsolutions in a miniaturized M83513 type connector. Theseconnectors feature ceramic capacitor planar arrays andferrite inductors. Solder cups accept #26 thru #30 AWGwire, or specify oversize contacts for #24 gage wire.Choose Pi or C Filter Arrays in seven filter classes andeight layouts. Glenair filtered Micro-D connectorscomply with applicable MIL-DTL-83513 requirementsand are 100% intermateable with standard connectors.Choose 9 to 67 Contacts, with standard cadmium ornickel plating on the connector housing or chooseoptional finishes such as gold or chem film.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-6E-Mail: sales@glenair.com

240-030Micro-D Filter ConnectorsSolder CupMicro-DConnectorsTABLE lll: CAPACITOR ARRAY CODECAPACITANCE RANGETABLE I: SHELL FINISH1 Aluminum Cadmium2 Aluminum Nickel5 Aluminum Gold6 Aluminum Chem FilmSYM MATERIAL FINISH DESCRIPTIONCLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300table ll: MICRO-D MOUNTING HARDWAREB P M M1 S S1 L K F RDThru-HoleOrderHardwareSeparatelyJackpostRemovableIncludes Nutand WasherJackscrewHex HeadRemovableE-ringJackscrewHex HeadRemovableE-ringExtendedJackscrewSlot HeadRemovableE-ringJackscrewSlot HeadRemovableE-ringExtendedJackscrewHex HeadNon-RemovableJackscrewSlot HeadNon-RemovableExtendedFloat MountFor FrontPanelMountingFloat MountFor RearPanelMountingLayoutmicro-d FILTER SOLDER CUP dimensionsA Max. B C Max. D Max. E Max. F H Max.In. mm.In .± .003mm.± 0.08 In. mm. In. mm. In. mm.In.± .004mm.± 0.10 In. mm.9P .785 19.94 .565 14.35 .333 8.46 .184 4.67 .310 7.87 .183 4.65 .400 10.169S .785 19.94 .565 14.35 .400 10.16 .250 6.35 .310 7.87 .195 4.95 .400 10.1615P .935 23.75 .715 18.16 .483 12.27 .184 4.67 .310 7.87 .183 4.65 .550 13.9715S .935 23.75 .715 18.16 .551 14.00 .250 6.35 .310 7.87 .195 4.95 .550 13.9721P 1.085 27.56 .865 21.97 .633 16.08 .184 4.67 .310 7.87 .183 4.65 .700 17.7821S 1.085 27.56 .865 21.97 .701 17.81 .250 6.35 .310 7.87 .195 4.95 .700 17.7825P 1.185 30.01 .965 24.51 .733 18.62 .184 4.67 .310 7.87 .183 4.65 .800 20.3225S 1.185 30.01 .965 24.51 .801 20.35 .250 6.35 .310 7.87 .195 4.95 .800 20.3231P 1.335 33.91 1.115 28.32 .883 22.43 .184 4.67 .310 7.87 .183 4.65 .950 24.1331S 1.335 33.91 1.115 28.32 .951 24.16 .250 6.35 .310 7.87 .195 4.95 .950 24.1337P 1.485 37.72 1.265 32.13 1.033 26.24 .184 4.67 .310 7.87 .183 4.65 1.100 27.9437S 1.485 37.72 1.265 32.13 1.101 27.96 .250 6.35 .310 7.87 .195 4.95 1.100 27.94© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-7E-Mail: sales@glenair.com

Micro-DConnectors240-031Micro-D Filter ConnectorsVertical Mount Printed Circuit BoardMicro-D Vertical Mount PCBBasic Part NumberPC Tail Length (Inches)1 - .110 (2.79 mm)2 - .250 (6.35 mm)Filter ConnectorProduct CodeShell Finish(See Table I)Contact TypePS - Pin/SocketFilter TypeP - Pi CircuitC - C Circuit240 - 031 - 2 - 25 PS C D 1 PNNumber of Contacts9, 15, 21, 25, 31, 37Filter ClassA, B, C, D, E, F or G(See Table II)DEDF.096/.088 (2.43/2.23) DIA.PI FILTER .930 (23.62) MAX.C FILTER .530 (13.46) MAX.ABCHardware OptionNN - No Jackpost, No Threaded InsertPN - Extended Jackpost for .062" (1.6) PCB,No Threaded InsertRN - Extended Jackpost for .196" (5.0) PCB,No Threaded InsertNU - Threaded Insert Only, No JackpostsPU - Short Jackpost and Threaded InsertRear Panel Jackposts with Threaded Insert:R6U - 0.125" (3.2) PanelR5U - 0.094" (2.4) PanelR4U - 0.062" (1.6) PanelR3U - 0.047" (1.2) PanelR2U - 0.031" (0.8) PanelJack screw Options:M - Hex Head JackscrewsS - Slot Head Jackscrews.025 (0.64)Ø.018 ± .002(0.46 ± 0.05)TAIL LENGTH ± .015(± 0.38)Printed Circuit Board Micro-D Filter Connectors. Thesevertical mount PCB connectors are ideal for flexiblecircuit or motherboard applications.Integral Board Standoffs and Pre-Tinned Tails—Theseconnectors are solder dipped (63/37 SnPb) and featurea full complement of mounting hardware options.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-8E-Mail: sales@glenair.com

240-031Micro-D Filter ConnectorsVertical Mount Printed Circuit BoardMicro-DConnectorsTABLE I: SHELL FINISHSYM MATERIAL FINISH DESCRIPTION1 Aluminum Cadmium2 Aluminum Nickel5 Aluminum Gold6 Aluminum Chem Film33 Aluminum Ni-PTFE 1000 Hour Grey TMTABLE ll: CAPACITOR ARRAY CODECAPACITANCE RANGE*CLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300Layoutmicro-d FILTER PIGTAIL dimensionsA Max. B C Max. D Max. E Max. FIn. mm.In .± .003mm.± 0.08 In. mm. In. mm. In. mm.In.± .0049P .785 19.94 .565 14.35 .333 8.46 .184 4.67 .310 7.87 .183 4.659S .785 19.94 .565 14.35 .400 10.16 .250 6.35 .310 7.87 .195 4.9515P .935 23.75 .715 18.16 .483 12.27 .184 4.67 .310 7.87 .183 4.6515S .935 23.75 .715 18.16 .551 14.00 .250 6.35 .310 7.87 .195 4.9521P 1.085 27.56 .865 21.97 .633 16.08 .184 4.67 .310 7.87 .183 4.6521S 1.085 27.56 .865 21.97 .701 17.81 .250 6.35 .310 7.87 .195 4.9525P 1.185 30.01 .965 24.51 .733 18.62 .184 4.67 .310 7.87 .183 4.6525S 1.185 30.01 .965 24.51 .801 20.35 .250 6.35 .310 7.87 .195 4.9531P 1.335 33.91 1.115 28.32 .883 22.43 .184 4.67 .310 7.87 .183 4.6531S 1.335 33.91 1.115 28.32 .951 24.16 .250 6.35 .310 7.87 .195 4.9537P 1.485 37.72 1.265 32.13 1.033 26.24 .184 4.67 .310 7.87 .183 4.6537S 1.485 37.72 1.265 32.13 1.101 27.96 .250 6.35 .310 7.87 .195 4.95mm.± 0.10D© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-9E-Mail: sales@glenair.com

Micro-DConnectors240-031Micro-D Filter ConnectorsVertical Mount PCB Hardware OptionsConnector Supplied Without HardwareConnector Supplied With Threaded InsertsA DIAMETER9-51 CONTACTS.096/.088 (2.44/2.24)100 CONTACTS.150/.145 (3.81/3.68)9-51 CONTACTSNO. 2-56 UNC-2B100 CONTACTSNO. 4-40 UNC-2BANN StyleThru-Hole, No HardwareJackpost and Threaded InsertNU StyleThreaded InsertRear Panel Jackpost and Threaded InsertDØ.018 ± .002(0.46 ± 0.05).160 (4.1) MIN. (9-51 PINS).225 (5.7) MIN. (100 PIN)PU StyleJackpost with Threaded Insert.160 (4.1) MIN. (9-51 PINS).225 (5.7) MIN. (100 PIN)RU StyleRear Panel Jackpost with Threaded InsertExtended Jackpost Jackscrew, Hex Jackscrew, SlotPC BOARDPN Style for .062" PCBRN Style for .196" PCBM StyleHex Head Jackscrew with E-RingS StyleSlot Head Jackscrew with E-Ring© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-10E-Mail: sales@glenair.com

240-031Micro-D Filter ConnectorsVertical Mount PCB Pin Connector LayoutsMicro-DConnectorsPC Tail Diameter .018 ± .002 (0.46 ± 0.05)Contact numbers shown are for pin connectors. Reverse for socket.1.050 (1.27) TYP.025 (0.64) TYP56 9.050 (1.27) TYP.565 (14.35).096 (2.44) DIA TYP1.050 (1.27) TYP.025 (0.64) TYP9 15.050 (1.27) TYP.715 (18.16)8.096 (2.44) DIA TYP9 Contacts 15 ContactsD1.050 (1.27) TYP.025 (0.64) TYP111.050 (1.27) TYP.025 (0.64) TYP1312 21.050 (1.27) TYP.865 (21.97).096 (2.44) DIA TYP14 25.050 (1.27) TYP.965 (24.51).096 (2.44) DIA TYP21 Contacts 25 Contacts1.050 (1.27) TYP.025 (0.64) TYP17 31.050 (1.27) TYP1.115 (28.3216.096 (2.44) DIA TYP1.050 (1.27) TYP.025 (0.64) TYP20 37.050 (1.27) TYP1.265 (32.13)19.096 (2.44)DIA TYP31 Contacts 37 Contacts© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-11E-Mail: sales@glenair.com

Micro-DConnectors240-032Micro-D Filter ConnectorsPre-Wired Pigtails with Insulated WireMicro-D PigtailBasic Part NumberWire TypeK - M22759/11 600 Vrms Teflon ® (TFE)C - M22759/33 600 Berms ModifiedCross-Linked Tefzel ® (ETFE)Filter ConnectorProduct CodeShell Finish(See Table I)Contact TypeP - PinS - SocketFilter TypeP - Pi CircuitC - C CircuitWire Length(Inches)Hardware(See Table II)240 - 032 - 2 - 25 P P B 6 K 1 - 18 BDNumber of Contacts9, 15, 21, 25, 31, 37ABCFilter ClassA, B, C, D, E, F or G(See Table III)PI FILTER 1.000 (25.4) MAX.C FILTER .700 (17.8) MAX.FWire Gauge(AWG)4 - #246 - #26Wire Color1 - White2 - Yellow5 - Color Coded per MIL-STD-681(#24 and #26 gauge only)7 - Ten Color RepeatD.096/.088 (2.43/2.23) DIA..093 ± .005(2.36 ± 0.13)WIRE LENGTH+1.0/-0.0 (+25.4/-0.0 )H.322 (8.19)MAX.287 (7.3)Glenair’s Filtered Pigtail Micro-D's provide EMI solutionsin a miniaturized M83513 Micro-D connector. Theseconnectors feature ceramic capacitor planar arraysand ferrite inductors. Insulated wire is factory precisioncrimpedto TwistPin contacts for superior reliability inthe most demanding environments.Choose 9 to 67 Contacts, with standard cadmium ornickel plating on the connector housing or chooseoptional finishes such as gold or chem film.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-12E-Mail: sales@glenair.comREV 25 August 2009

240-032Micro-D Filter ConnectorsPre-Wired Pigtails with Insulated WireMicro-DConnectorsTABLE I: SHELL FINISHSYM MATERIAL FINISH DESCRIPTION1 Aluminum Cadmium2 Aluminum Nickel5 Aluminum Gold6 Aluminum Chem FilmTABLE lll: CAPACITOR ARRAY CODECAPACITANCE RANGECLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300TABLE Il: MICRO-D MOUNTING HARDWAREB P M M1 S S1 L K F RDThru-HoleOrderHardwareSeparatelyJackpostRemovableIncludes Nutand Washer33 Aluminum Ni-PTFE 1000 Hour Grey TM REV 25 August 2009Jackscrew Jackscrew JackscrewHex HeadRemovableE-ringHex HeadRemovableE-ringExtendedSlot HeadRemovableE-ringJackscrewSlot HeadRemovableE-ringExtendedJackscrewHex HeadNon-RemovableJackscrewSlot HeadNon-RemovableExtendedFloat MountFor FrontPanelMountingFloat MountFor RearPanelMountingLayoutmicro-d FILTER PIGTAIL dimensionsA Max. B C Max. D Max. F H Max.In. mm.In .± .003mm.± 0.08 In. mm. In. mm.In.± .004mm.± 0.10 In. mm.9P .785 19.94 .565 14.35 .333 8.46 .184 4.67 .183 4.65 .400 10.169S .785 19.94 .565 14.35 .400 10.16 .250 6.35 .195 4.95 .400 10.1615P .935 23.75 .715 18.16 .483 12.27 .184 4.67 .183 4.65 .550 13.9715S .935 23.75 .715 18.16 .551 14.00 .250 6.35 .195 4.95 .550 13.9721P 1.085 27.56 .865 21.97 .633 16.08 .184 4.67 .183 4.65 .700 17.7821S 1.085 27.56 .865 21.97 .701 17.81 .250 6.35 .195 4.95 .700 17.7825P 1.185 30.01 .965 24.51 .733 18.62 .184 4.67 .183 4.65 .800 20.3225S 1.185 30.01 .965 24.51 .801 20.35 .250 6.35 .195 4.95 .800 20.3231P 1.335 33.91 1.115 28.32 .883 22.43 .184 4.67 .183 4.65 .950 24.1331S 1.335 33.91 1.115 28.32 .951 24.16 .250 6.35 .195 4.95 .950 24.1337P 1.485 37.72 1.265 32.13 1.033 26.24 .184 4.67 .183 4.65 1.100 27.9437S 1.485 37.72 1.265 32.13 1.101 27.96 .250 6.35 .195 4.95 1.100 27.94© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-13E-Mail: sales@glenair.com

Micro-DConnectors240-033Micro-D Filter ConnectorsPin-Socket In-Line Filter AdaptersMicro-D In-Line AdapterBasic Part NumberHardwareN - No HardwareP - Combination Jackscrew and Jackpost(See photograph on this page)Filter ConnectorProduct CodeShell Finish(See Table I)Contact TypePS - Pin/SocketFilter TypeP - Pi CircuitC - C Circuit240 - 033 - 2 - 25 PS C A PNumber of Contacts9, 15, 21, 25, 31, 37Filter ClassA, B, C, D, E, F or G(See Table II)D240-033-2-25PSCDPGLENAIR 06324 0608A B C SOCKETPINJDEFGH#2-56 UNC THDSKAvoid Costly Redesign with Micro-D Filter Adapters.Upgrade your existing cables and boxes to meet EMIrequirements. These pin-socket adapters can beplugged into any standard M83513 connectors. Simplyunplug your existing cable, install the filter adapter, andplug the cable into the adapter.Availability: Filter elements in stock. Products ship in twoweeks or less. Contact factory for price and delivery.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-14E-Mail: sales@glenair.com

240-033Micro-D Filter ConnectorsPin-Socket In-Line Filter AdaptersMicro-DConnectorsTABLE I: SHELL FINISHSYM MATERIAL FINISH DESCRIPTION1 Aluminum Cadmium2 Aluminum Nickel5 Aluminum Gold6 Aluminum Chem Film33 Aluminum Ni-PTFE 1000 Hour Grey TMTABLE ll: CAPACITOR ARRAY CODECAPACITANCE RANGE*CLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300micro-d in-line filter adapter contact arrangements1 2 3 4 51 2 3 4 5 6 781 2 3 4 5 6 7 8 9 10111 2 3 4 5 6 7 8 9 10 1112 1391521256 7 8 99 10 11 12 13 14 1512 13 14 15 16 17 18 19 20 2114 15 16 17 18 19 20 21 22 23 24 25311 2 3 4 5 6 7 8 9 10 1112 13 14 15 1617 18 19 20 21 22 23 24 25 26 27 28 29 30 31371 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 1920 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37DMating Face View of Pin Connector. Socket connectors have reversed cavity numbers.Layoutmicro-d FILTER INLINE dimensionsA Max. B C Max. D Max. E Max. F G Max. H J Max. K Max.In. mm.In.± .003mm.± 0.08 In. mm. In. mm. In. mm.In.± .004mm.± 0.10 In. mm.In.± .004mm.± 0.10 In. mm. In. mm.9PS .785 19.94 .565 14.35 .400 10.16 .250 6.35 .310 7.87 .195 4.95 1.400 35.56 .183 4.65 .333 8.46 .184 4.6715PS .935 23.75 .715 18.16 .551 14.00 .250 6.35 .310 7.87 .195 4.95 1.400 35.56 .183 4.65 .483 12.27 .184 4.6721PS 1.085 27.56 .865 21.97 .701 17.81 .250 6.35 .310 7.87 .195 4.95 1.400 35.56 .183 4.65 .633 16.08 .184 4.6725PS 1.185 30.01 .965 24.51 .801 20.35 .250 6.35 .310 7.87 .195 4.95 1.400 35.56 .183 4.65 .733 18.62 .184 4.6731PS 1.335 33.91 1.115 28.32 .951 24.16 .250 6.35 .310 7.87 .195 4.95 1.400 35.56 .183 4.65 .883 22.43 .184 4.6737PS 1.485 37.72 1.265 32.13 1.101 27.96 .250 6.35 .310 7.87 .195 4.95 1.400 35.56 .183 4.65 1.033 26.24 .184 4.67© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-15E-Mail: sales@glenair.comREV 28 October 2009

Micro-DConnectors240-034Micro-D Filter ConnectorsRight Angle Printed Circuit BoardMicro-D Right Angle PCBBasic Part NumberFilter ConnectorProduct CodeShell Finish(See Table I)Contact TypeP - PinS - SocketFilter TypeP - Pi CircuitC - C CircuitPC Tail Length (Inches).080, .110, .125,.150, .190, .250240 - 034 - 2 - 37 S P E PU - .080DPI FILTER 1.205 (30.61) MAXC FILTER .865 (21.97) MAXFNumber of Contacts9, 15, 21, 25, 31, 37CONFIGURATION FOR 9-25 CONTACTSHJFilter ClassA, B, C, D, E, F or G(See Table II)Hardware OptionNN - No Jackpost, No Threaded InsertPN - Jackpost, No Threaded InsertNU - Threaded Insert Only, No JackpostsPU - Jackpost and Threaded InsertRear Panel Jackposts with Threaded Insert:R6U - 0.125" (3.2) PanelR5U - 0.094" (2.4) PanelR4U - 0.062" (1.6) PanelR3U - 0.047" (1.2) PanelR2U - 0.031" (0.8) PanelABC.335 (8.51)MAXED2X MOUNTING HOLES.096 DIA. ± .003 (2.44 ± 0.08)OR OPTIONAL 2-26 UNC 2B THREADED INSERTS#2-56 UNC-2B THREADSPI FILTER 1.300 (33.02) MAXC FILTER .960 (24.38) MAXHTAIL LENGTH ±.015 (0.38)CONFIGURATION FOR 31-37 CONTACTSJ.430 (10.92)MAX2X MOUNTING HOLES .096 DIA. ± .003 (2.44 ± 0.08)OR OPTIONAL #2-56 UNC 2B THREADED INSERTSRight Angle Board Mount Filtered Micro-D's. Theseconnectors feature low-pass EMI filtering in a rightangle header for PCB termination..100" x .100" Board Spacing—These connectors aresimilar to “CBR” style Micro-D's and share the sameboard footprint, allowing retrofit to existing boards.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-16E-Mail: sales@glenair.com

240-034Micro-D Filter ConnectorsRight Angle Printed Circuit BoardMicro-DConnectorsTABLE I: SHELL FINISHSYM MATERIAL FINISH DESCRIPTION1 Aluminum Cadmium2 Aluminum Nickel5 Aluminum Gold6 Aluminum Chem Film33 Aluminum Ni-PTFE 1000 Hour Grey TMTABLE ll: CAPACITOR ARRAY CODECAPACITANCE RANGE*CLASS PI - CIRCUIT (pF) C - CIRCUIT (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300micro-d FILTER classes and performanceFilter Class → A B C D E F GCapacitance, Picofarads (pF)C Filter 19000-28000 16000-22500 9000-16500 4000-6000 1650-2500 400-650 200-300Pi Filter 38000-56000 32000-45000 18000-33000 8000-12000 3300-5000 800-1300 400-600Insertion Loss, dB Minimum, 25° C.Filter Type → C Pi C Pi C Pi C Pi C Pi C Pi C Pi1 MHz 6 10 5 8 3 5 — 1 — — — — — —10 MHz 24 40 23 35 16 25 8 14 4 8 — 2 — 0.8100 MHz 41 62 39 60 35 57 28 50 21 40 10 15 5 13500-1000 MHz 50 66 49 62 46 60 41 58 34 52 23 32 17 22DLayoutMICRO-D FILTER RIGHT ANGLE PCB CONNECTORSC FilterPi FilterA Max. B C Max. D Max. E Max. F G Max. H J H JIn.mm.In.±.003mm.± 0.08 In. mm. In. mm. In. mm.In.±.004mm.± 0.10 In. mm.9P .785 19.94 .565 14.35 .333 8.46 .184 4.67 .310 7.87 .183 4.65 .420 10.67 .440 11.18 .460 11.68 .740 18.80 .760 19.309S .785 19.94 .565 14.35 .400 10.16 .250 6.35 .310 7.87 .195 4.95 .420 10.67 .440 11.18 .460 11.68 .740 18.80 .760 19.3015P .935 23.75 .715 18.16 .483 12.27 .184 4.67 .310 7.87 .183 4.65 .420 10.67 .340 8.64 .460 11.68 .640 16.26 .760 19.3015S .935 23.75 .715 18.16 .551 14.00 .250 6.35 .310 7.87 .195 4.95 .420 10.67 .340 8.64 .460 11.68 .640 16.26 .760 19.3021P 1.085 27.56 .865 21.97 .633 16.08 .184 4.67 .310 7.87 .183 4.65 .420 10.67 .340 8.64 .460 11.68 .640 16.26 .760 19.3021S 1.085 27.56 .865 21.97 .701 17.81 .250 6.35 .310 7.87 .195 4.95 .420 10.67 .340 8.64 .460 11.68 .640 16.26 .760 19.3025P 1.185 30.01 .965 24.51 .733 18.62 .184 4.67 .310 7.87 .183 4.65 .420 10.67 .340 8.64 .460 11.68 .640 16.26 .760 19.3025S 1.185 30.01 .965 24.51 .801 20.35 .250 6.35 .310 7.87 .195 4.95 .420 10.67 .340 8.64 .460 11.68 .640 16.26 .760 19.3031P 1.335 33.91 1.115 28.32 .883 22.43 .184 4.67 .310 7.87 .183 4.65 .520 13.21 .340 8.64 .460 11.68 .640 16.26 .760 19.3031S 1.335 33.91 1.115 28.32 .951 24.16 .250 6.35 .310 7.87 .195 4.95 .520 13.21 .340 8.64 .460 11.68 .640 16.26 .760 19.3037P 1.485 37.72 1.265 32.13 1.033 26.24 .184 4.67 .310 7.87 .183 4.65 .520 13.21 .340 8.64 .460 11.68 .640 16.26 .760 19.3037S 1.485 37.72 1.265 32.13 1.101 27.96 .250 6.35 .310 7.87 .195 4.95 .520 13.21 .340 8.64 .460 11.68 .640 16.26 .760 19.30In.±.010mm.±0.25In.±.010mm.±0.25In.±.010mm.±0.25In.±.010mm.±0.25© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-17E-Mail: sales@glenair.com

Micro-DConnectors240-034Micro-D Filter ConnectorsRight Angle Printed Circuit Board LayoutsPin ConnectorPC Tail Diameter .018 ± .002 (0.46 ± 0.05)Contact numbers shown are for pin connectors.Patterns shown are for connector mounting side of PC board..083 (2.11).020 (0.51)CONNECTORFLANGEC L.100 (2.54)TYP.100 (2.54).108 (2.74)C L2 4 5CONNECTORFLANGE7.100 (2.54)1 2 4 56 7 3 8 9.050 (1.27)TYP.565 (14.35).100 (2.54) 1 3 12 6 89 10 11 13 14 15.050 (1.27)TYP.715 (18.16).020 (0.51)D9 Contacts 15 Contacts.100 (2.54).083 (2.11)C LCONNECTORFLANGE.100 (2.54).083 (2.11)CONNECTORFLANGE23568102 3 4 6 8 10 11 12.100 (2.54) 11214 4 17 7 9 1113 15 16 18 19 20 21.050 (1.27)TYP.020 (0.51).100 (2.54) 1141517516 18 19.050 (1.27)TYPC Ḷ965 (24.51)7922 2420 21 23 2513.020 (0.51).865 (21.97)21 Contacts 25 Contacts.100 (2.54)2 4.158 (4.01)6C L8 9CONNECTORFLANGE11 13 15.100 (2.54).158 .183(4.65) (4.01)13579C L11 13 15CONNECTORFLANGE1719.100 (2.54) 13 5 7 24 10 12 14 1617 19 21 23 25 27 29 30.020 (0.51).100 (2.54)2 4 6 8 10 12 14 16 1820 22 24 26 28 29 31 33 35 37.020 (0.51)18 20 2226.050 (1.27)TYP1.115 (28.32)28312123 25 2730.050 (1.27)TYP1.265 (32.13)32 34 3631 Contacts 37 Contacts© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-18E-Mail: sales@glenair.com

240-034Micro-D Filter ConnectorsRight Angle Printed Circuit Board LayoutsSocket ConnectorMicro-DConnectorsPC Tail Diameter .018 ± .002 (0.46 ± 0.05)Contact numbers shown are for socket connectors.Patterns shown are for connector mounting side of PC board..083 (2.11).020 (0.51)CONNECTORFLANGEC L.100 (2.54)TYP.100 (2.54).108 (2.74)C L7 5 4CONNECTORFLANGE2.100 (2.54)5 4 2 19 8 3 7 6.050 (1.27)TYP.565 (14.35).100 (2.54) 8 6 12 3 115 14 13 11 10 9.050 (1.27)TYP.715 (18.16).020 (0.51)9 Contacts 15 ContactsD.100 (2.54).083 (2.11)C LCONNECTORFLANGE.100 (2.54).083 (2.11)CONNECTORFLANGE108653212 11 1086432.100 (2.54) 11 9 7 17 4 14 121 20 19 18 16 15 13.050 (1.27)TYP.865 (21.97)12.020 (0.51)C Ḷ965 (24.51).100 (2.54) 13 24 22 9 7 5 17 15 125 23 21 20 19 18 16 14.050 (1.27)TYP.020 (0.51)21 Contacts 25 Contacts.100 (2.54)15.158 (4.01)1311C LCONNECTORFLANGE9 8 6 4 2.100 (2.54).158(4.01)1917151311C L97 5 3CONNECTORFLANGE1.100 (2.54) 16 14 12 10 24 7 5 3 130 29 27 25 23 21 19 17.020 (0.51).100 (2.54)18 16 14 12 10 8 6 4 237 35 33 31 29 28 26 24 22 20.020 (0.51)31 28 2622.050 (1.27)TYP1.115 (28.32)20183634 32 3027.050 (1.27)TYP1.265 (32.13)25232131 Contacts 37 Contacts© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comD-19E-Mail: sales@glenair.com

Four Reasons to AddGlenair to Your ShortList of Suppliers:First and foremost you needavailability.Are the products and components you needeither in stock or able to be manufactured ina short period of time? Glenair has built itsreputation on fast turnaround. We maintainthe world's largest inventory of connectoraccessories and deliver faster turnaround onquotes and orders than anyone else in ourbusiness. Today, Glenair is changing the waythe interconnect industry operates: from a longlead-time, custom order problem, to a fastresponse, in-stock solution.Second, you need capacity.Can the supplier respond to your evolvingrequirements with the factory capacity and labornecessary to meet every demand—from onepiece to one hundred thousand? Glenair hasbuilt the largest capacity, broadest capabilityfactory in the interconnect accessory industry.We have the knowledge, experience andequipment necessary to handle any productionrequirement, no matter how large or complex,and the manpower to tackle even the mostaggressive production schedules.Third, you needconvenience in ordering.Do your current suppliers insist on quantityor dollar minimums whenever you place anorder? Are their products available only fromdistributors with limited product knowledgeand equally limited shelf stock? Is it hard toget samples when and where you need them?If your answer to any of these questions isyes, we encourage you to consider Glenair,where complete convenience in ordering—yourconvenience, not ours—has been a guidingprinciple since 1956.Finally, you needtop quality products backed byoutstanding technical support.At Glenair, we've made product quality andworldwide technical support a major part of ourapproach to earning your trust and loyalty—and we've been doing so since 1956. We'veestablished an unsurpassed sales, support andengineering presence in every major market inthe world, and we've designed quality into everyproduct we ship.In every respect, our formula for serving our filter connector customersis identical to the "best-value" service model we've relied on to maintain ourleadership position in our core, connector accessory business:• Same-Day Delivery on OurMost Popular Part Numbers• Lightning-Fast Turnaroundon Quotes for Price andDelivery• No Price or QuantityMinimums• Outstanding ApplicationEngineering and WorldwideTechnical Support

D-Subminiature ConnectorsEMI Filtered (MIL-DTL-24308 Type)D-SubminiatrureConnectorsPRODUCT FEATURESGlenair’s Filtered D-Subs provide EMI solutions in aminiaturized MIL-DTL-24308 type connector. These connectorsfeature ceramic capacitor planar arrays and ferrite inductors.Solder cup contacts accept 22 gage wire.Choose Pi or C Filter Arrays in seven filter classes andeleven layouts. Glenair filtered D-Sub connectors complywith applicable MIL-DTL-24308 requirements and are 100%intermateable with both standard density and high densityconnectors.Choose 9 to 104 Contacts, with yellow cadmium, nickel orzinc-nickel plating on the connector housing. Ultra ruggedstainless steel is available for most applications. For customrequirements we can propose a solution and back it up withrapid design and prototyping.MIL-DTL-24308 Type D-Sub Filtered ConnectorsThe Standard Solution to Electronic Black Box EMI/EMP ProtectionFiltered D-Sub with Solder Cup or PC TailsThese metal shell filtered MIL-DTL-24308 connectors are backfilled with thermally conductive epoxy to allow solderingwithout heat damage to sensitive filter elements. Standard density and high density versions are available for everyinsert arrangement.Filtered Right Angle Version with PC TailsDesigned to mate with the popular MIL-DTL-24308 connector family, these right angle PC tail filter connectors areavailable in Mil-Aero and European footprints. A single piece metal shell provides structual integrity for board mountingand eliminates "flaky" right angle mounting tabs.E© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-1E-Mail: sales@glenair.com

D-SubminiatrureConnectorsPanel Cut-Out and Footprintsfor 240-021 and 240-066 D-Subminiature ConnectorsEMI Filtered (MIL-DTL-24308 Type)C-L 9 POSØ .042 ±.003Plated Through HoleTypC-L 25 POSC-L 25 POSØ.120/.125Typ"G".984 1.312 1.852"K""G""K""G"6 9 9 15 14 251518113.054 Typ.108 Typ"H".163.055Typ"H".216TypTyp.163 Typ.324 Typ.272 Typ.108 Typ.054 Typ.381 Typ.216 Typ.489 Typ.162 Typ.598 Typ.270 Typ.109 Typ"K""H".378 Typ.218 Typ.326 Typ.435 Typ.544 TypC-L 37 POSC-L 50 POS.652 Typ"G"2.500 2.40620 37"K""G"34 50"K"E.055 Typ.163 Typ.272 Typ.381 Typ.489 Typ.598 Typ.707 Typ.815 Typ.924 Typ1.109 Typ.218 Typ.326 Typ.435 Typ.544 Typ.652 Typ.761 Typ.870 Typ.978 Typ19"H".055 Typ.163 Typ.272 Typ.381 Typ.489 Typ.598 Typ.707 Typ.815 Typ1.109 Typ.218 Typ.326 Typ.435 Typ.544 Typ.652 Typ.761 Typ.870 Typ17"H" TypC-L HD15Ø.032±.003 PlatedThrough HoleTypC-L HD26C-L HD44"G".98411 15"H" Typ"K""G"1.31219 26"H" Typ"K""G"1.85231 44"H" Typ"K".035 Typ.080 Typ.125 Typ.170 Typ.215 Typ1 5.010 Typ.055 Typ.100 Typ.145 Typ.190 TypØ.120/.125Typ.025 Typ.070 Typ.115 Typ.160 Typ.205 Typ.250 Typ.295 Typ.340 Typ.385 Typ1 9PCB patterns for high density inserts as viewed from noncomponent side of PCB. Patterns shown are for pin inserts,sockets are mirrored around center line..020 Typ.065 Typ.110 Typ.155 Typ.200 Typ.245 Typ.290 Typ.335 Typ.380 Typ.025 Typ.070 Typ.115 Typ.160 Typ.205 Typ.250 Typ.295 Typ.340 Typ.385 Typ.430 Typ.475 Typ.520 Typ.565 Typ.610 Typ.655 Typ115.020 Typ.065 Typ.110 Typ.155 Typ.200 Typ.245 Typ.290 Typ.335 Typ.380 Typ.425 Typ.470 Typ.515 Typ.560 Typ.605 Typ.650 TypC-L HD62C-L HD78© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A."H" Typ"G"GLENAIR, "G" INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 2.406818-247-6000 • FAX 818-500-99122.500"K"www.glenair.com60 7843 62 E-2E-Mail: sales@glenair.com"H" Typ"K".0245 Typ.072 Typ1 21.023 Typ.0705 Typ.095 Typ.190 Typ1 20.0475 Typ.1425 Typ

.035 Typ.080 Typ.125 Typ.170 Typ.215 Typ1 5.010 Typ1 9 115.020 Typ.020 Typ.025.055 TypTyp.025 Typ.065 TypØ.120/.125.070.065 Typ.100 TypTypTypTyp.070 Typ.110.115 Typ.110 Typ.145 Typ.115 Typ.155 Typ.160 Typ.155 Typ.190 Typ.160 Typ.200 Typ.205 Typ.200 Typ.205 Typ.245 Typ.245 Typ.290 Typ.250 Typ.250 Typ.290 Typ.295 TypPanel Cut-Out and Footprints.295 Typ.335 Typ.340 Typ.340 Typ.380 Typ.385 Typfor 240-021 and 240-066 D-Subminiature .385 TypConnectors.430 Typ.475 TypEMI Filtered (MIL-DTL-24308 Type).520 Typ.565 Typ.610 Typ.655 Typ.335 Typ.380 Typ.425 Typ.470 Typ.515 Typ.560 Typ.605 Typ.650 TypD-SubminiatrureConnectorsC-L HD62C-L HD78"G"2.50043 62"H" Typ"K""G"2.40660 78"H" Typ"K".4045 Typ.0245 Typ.072 Typ.1195 Typ.167 Typ.2145 Typ.262 Typ.3095 Typ.357 Typ1 21.023 Typ.0705 Typ.118 Typ.1655 Typ.213 Typ.2605 Typ.308 Typ.3555 Typ.403 Typ.4505 Typ.095 Typ.190 Typ.285 Typ.380 Typ.475 Typ.570 Typ.665 Typ.760 Typ.855 Typ1 20.0475 Typ.1425 Typ.2375 Typ.3325 Typ.4275 Typ.5225 Typ.6175 Typ.7125 Typ.8075 Typ.9025 Typ.9665.8715.7765.6815.5865.4915.3965.3015.2065.1115.0165"G".452 Typ.4995 Typ.5945 Typ.642 Typ.6895 Typ.737 Typ.7845 Typ.832 Typ.8795 Typ.9745 Typ.547 Typ.927 Typ85C-L HD104104.498 Typ.5455 Typ.593 Typ.6405 Typ.688 Typ.783 Typ.8305 Typ.878 Typ"H".7355 Typ.9255 Typ.973 Typ.9335.8385.7435.6485.5535.4585.3635.2685.1735.0785"K"AP MinA10°TypR MinR .076 MaxNTPanel mount cutout recommendations asviewed from front face of panel.Ø SSECTION A-ATYP 2 PLTABLE VI: CUT-OUT DIMENSIONSShellSizeNBSCPMinRMin1 .984 (25.0) .396 (10.1) .735 (18.7)2 1.312 (33.3) .396 (10.1) 1.060 (26.9)3 1.852 (47.0) .396 (10.1) 1.603 (40.7)4 2.500 (63.5) .396 (10.1) 2.251 (57.2)5 2.406 (61.1) .510 (13.0) 2.148 (55.0)6 2.500 (63.5) .630 (16.0) 2.276 (57.8)Panel ThicknessØ .120 ±.005E.064.159.254.349.444.539.634.729.824.919121.031.126.221.316.411.506.601.696.791.886.981TABLE VII: PANEL THICKNESSPanelCodePanelThicknessR1 .031 (0.79) N/A N/AR2 .047 (1.19)R3 .062 (1.57)R4 .093 (2.36)R5 .104 (2.64)R6 .125 (3.18)ST.157/.199(4.0/5.1) .005 (0.13).157/.199(4.0/5.1) .020 (0.50).157/.199(4.0/5.1) .051 (1.30).157/.199(4.0/5.1) .061 (1.55).157/.199(4.0/5.1) .082 (2.08)R7 .156 (3.96.157/.199(4.0/5.1) .114 (2.90)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-3E-Mail: sales@glenair.com

D-SubminiatrureConnectors240-021D-Subminiature ConnectorEMI Filtered (MIL-DTL-24308 Type)MIL-C-24308 TypeFilter Type(See Table III)Filter ConnectorProduct CodeShell Material/Finish(See Table II)Filter Value(See Table IV)Termination TypeP - PC TailsS - Solder Cups240 - 021 S 15S J P G B – SContact DensityS - StandardH - HighShell Size and Contact Type(See Table I)Hardware Options(See Table V)D Pin(Inside)B Socket (Outside)B Pin (Inside)D Socket(Outside).248 (6.3).238 (6.0)Socket.236 (6.0).229 (5.6)PinØ .030 ± .001 (0.76 ± .03) StandardØ .020 ± .001 (0.50 ± .03) High Density.180± .020(4.6 ± .5)FGEECA.065 ± .005(1.7 ± .1).220 (5.6) MaxHStandard #20 SolderCup .042 (1.1) Min I.D.HD #22 Solder Cup.0345 (.8763 Min I.D.2 X Ø .125/.120 (3.2/3.0)or 4-40 ClinchAPPLICATION NOTES1. Materials/Finishes:Shells - See Table IIInsulators - High grade rigid dielectric/N.A.Contacts - Copper Alloy/Gold Plated2. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number3. Electrical Performance:Dielectric withstanding voltage class A and B: 100 VDCAll others: 500 VDCInsulation resistance: 5,000 megohms @ 100 VDCCurrent Rating Standard Density: 7.5 Amps maximumCurrent Rating High Density: 5 Amps maximum4. Dimensions B and D taken from inside of shell forPin/Plug and outside for Socket/Receptacle5. Metric dimensions (mm) are indicated in parentheses© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-4E-Mail: sales@glenair.com

240-021D-Subminiature ConnectorEMI Filtered (MIL-DTL-24308 Type)D-SubminiatrureConnectorsShellSizeNumber ofContactsSTDHDA±.015 (0.38)B±.005 (0.13)TABLE I: DIMENSIONSC±.005 (0.13)D±.005 (0.13)E±.015 (0.38)1 9P 15P 1.213 (30.8) .666 (16.9) .984 (25.0) .329 (8.4) .494 (12.5) .769 (19.5) .432 (11.0)9S 15S 1.213 (30.8) .643 (16.3) .984 (25.0) .311 (7.9) .494 (12.5) .769 (19.5) .432 (11.0)234FMaxGMax15P 26P 1.541 (39.1) .994 (25.2) 1.312 (33.3) .329 (8.4) .494 (12.5) 1.093 (27.8) .432 (11.0)15S 26S 1.541 (39.1) .971 (24.7) 1.312 (33.3) .311 (7.9) .494 (12.5) 1.093 (27.8) .432 (11.0)25P 44P 2.088 (53.0) 1.534 (39.0) 1.852 (47.0) .329 (8.4) .494 (12.5) 1.635 (41.5) .432 (11.0)25S 44S 2.088 (53.0) 1.511 (38.4) 1.852 (47.0) .311 (7.9) .494 (12.5) 1.635 (41.5) .432 (11.0)37P 62P 2.729 (69.3) 2.182 (55.4) 2.500 (63.5) .329 (8.4) .494 (12.5) 2.282 (58.0) .432 (11.0)37S 62S 2.729 (69.3) 2.159 (54.8) 2.500 (63.5) .311 (7.9) .494 (12.5) 2.282 (58.0) .432 (11.0)50P 78P 2.635 (66.9) 2.079 (52.8) 2.406 (61.1) .441 (11.2) .605 (15.4) 2.188 (55.6) .544 (13.8)550S 78S 2.635 (66.9) 2.064 (52.4) 2.406 (61.1) .423 (10.7) .605 (15.4) 2.188 (55.6) .544 (13.8)104P 2.729 (69.3) 2.212 (56.2) 2.500 (63.5) .503 (12.8) .668 (17.0) 2.312 (58.7) .606 (15.4)6x 104S 2.729 (69.3) 2.189 (55.6) 2.500 (63.5) .486 (12.3) .668 (17.0) 2.312 (58.7) .606 (15.4)AZ MinR .076 (1.9) MaxPanel ThicknessTABLE V: HARDWARE OPTIONSSymbolHardwareBNo HardwareY MinC4-40 Clinch NutA 10°TypWRear Panel MountCutout RecommendationsAs Viewed From Front Face Of PanelØ STSection A-ATyp 2 PlØ .120 (3.0) ±.005 (0.1)ShellSizeVMinTABLE VI: CUT-OUT DIMENSIONSWBSCXMINYMINZMIN1 .442 (11.2) .984 (25.0) .779 (19.8) .396 (10.1) .735 (18.7)2 .442 (11.2) 1.312 (33.3) 1.110 (28.2) .396 (10.1) 1.060 (26.9)3 .442 (11.2) 1.852 (47.0) 1.649 (41.9) .396 (10.1) 1.603 (40.7)4 .442 (11.2) 2.500 (63.5) 2.296 (58.3) .396 (10.1) 2.251 (57.2)5 .554 (14.1) 2.406 (61.1) 2.198 (55.8) .510 (13.0) 2.148 (55.0)6 .616 (15.6) 2.500 (63.5) 2.322 (59.0) .630 (16.0) 2.276 (57.8)ER .076 (1.9) MaxTyp 4 PlacesV Min10°TypX MinWFront Panel MountCutout RecommendationsR .060 (1.5) MaxTyp 2 Places.120 (3.0)R .050 (1.3) MaxTyp 4 PlacesTABLE IV:CAPACITOR ARRAY CODE ANDCAPACITANCE RANGEClass PI-Circuit (pF) C-Circuit (pF)A 38,000 - 56,000 19,000 -28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9.000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300TABLE VII: PANEL THICKNESSPanelCodePanelThicknessR1 .031 (0.79) N/A N/AR2 .047 (1.19)R3 .062 (1.57)R4 .093 (2.36)R5 .104 (2.64)R6 .125 (3.18)R7 .156 (3.96)ST.156/.199(4.0/5.1) .005 (0.13).156/.199(4.0/5.1) .020 (0.50).156/.199(4.0/5.1) .051 (1.30).156/.199(4.0/5.1) .061 (1.55).156/.199(4.0/5.1) .082 (2.08).156/.199(4.0/5.1) .114 (2.90)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-3E-Mail: sales@glenair.com

D-SubminiatrureConnectors240-066D-Subminiature Connector, Right Angle MountEMI Filtered (MIL-DTL-24308 Type)Filter ConnectorProduct CodeMIL-C-2483 TypeContact DensityS = StandardH = HighShell Material/Finish(See Table II)Filter Value(See Table IV)Footprint TypeM = Mil-SpecE = European(See Table V)240 - 066 S - 15P J C A C M - GMCShell Size and Contact Type(See Table I)Ø.122 +.003-.002Filter Value(See Table III)Mounting OptionsB = Through HoleC = 4-40 InsertM = Metric Thread (M3)Shell to Shell GroundingG = With Ground (Plug/Pin Only)N = No GroundK(G)Inboard Contact RowTo Mounting HoleGHØ.030 ±.002Ø.020 ±.002 For High DensityHGH Typ 3 PlØ.020 ±.002HIGH DENSITY (15 THRU 62) AND STANDARD DENSITY 50 POSHIGH DENSITY 78 POSITIONED Pin(Inside)B Socket (Outside)B Pin (Inside)CAD Socket(Outside).250 (6.4)Ø120/.125 or4-40 UNC Threaded InsertTyp 2 PlFE.186±.020(4.7 ± 0.5).233 +.003 For Plug-.004.243 ±.005 For ReceptacleG.125 (Through Hole).142 (Threaded Hole).093STANDARD DENSITY (9 THRU 37)HSee Note 2G-groundingOn Top And BottomEdges (Plug Only)PLUG VIEWPLUG VIEWRECEPTACLE VIEWAPPLICATION NOTES1. Materials/Finishes:Shells - See Table IIInsulators - High grade rigid dielectric/N.A.Contacts - Copper Alloy/Gold Plated2. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number.3. Dimensions B and D taken from inside of shell forPin/Plug and outside for Socket/Receptacle.4. Electrical Performance:Dielectric withstanding voltage class A and B: 100VDC, all others: 500 VDCInsulation Resistance: 5,000 megohms @ 100 VDCCurrent Rating Standard Density: 7.5 Amps max.Current Rating High Density: 5 Amps maximum5. Metric dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-6E-Mail: sales@glenair.com

240-066D-Subminiature Connector, Right Angle MountEMI Filtered (MIL-DTL-24308 Type)D-SubminiatrureConnectorsShellSizeNumber ofContactsSTD HDA±.015 (0.38)TABLE I: DIMENSIONSB±.005 (0.13)C±.005 (0.13)D±.005 (0.13)E±.015 (0.38)FMax1 9P 15P 1.213 (30.8) .666 (16.9) .984 (25.0) .329 (8.4) .494 (12.5) .769 (19.5)9S 15S 1.213 (30.8) .643 (16.3) .984 (25.0) .311 (7.9) .494 (12.5) .769 (19.5)23456 X15P 26P 1.541 (39.1) .994 (25.2) 1.312 (33.3) .329 (8.4) .494 (12.5) 1.093 (27.8)15S 26S 1.541 (39.1) .971 (24.7) 1.312 (33.3) .311 (7.9) .494 (12.5) 1.635 (41.5)25P 44P 2.088 (53.0) 1.534 (39.0) 1.852 (47.0) .329 (8.4) .494 (12.5) 1.635 (41.5)25S 44S 2.088 (53.0) 1.511 (38.4) 1.852 (47.0) .311 (7.9) .494 (12.5) 1.635 (41.5)37P 62P 2.729 (69.3) 2.182 (55.4) 2.500 (63.5) .441 (11.2) .494 (12.5) 2.282 (58.0)37S 62S 2.729 (69.3) 2.159 (54.8) 2.500 (63.5) .423 (10.7) .494 (12.5) 2.282 (58.0)50P 78P 2.635 (66.9) 2.079 (52.8) 2.406 (61.1) .503 (12.8) .605 (15.4) 2.188 (55.6)50S 78S 2.635 (66.9) 2.064 (52.4) 2.406 (61.1) .486 (12.3) .605 (15.4) 2.188 (55.6)104P 2.729 (69.3) 2.212 (56.2) 2.500 (63.5) .503 (12.8) .668 (17.0) 2.312 (58.7)104S 2.729 (69.3) 2.189 (55.6) 2.500 (63.5) .486 (12.3) .668 (17.0) 2.312 (58.7)TABLE II: SHELL MATERIAL/FINISHSymbol Material Finish DescriptionJMMTAluminumYellow CadmiumElectroless NickelNI-PTFE 1000 Hour Grey TMNickel Fluorocarbon PolymerP Stainless Steel Electro Deposited NickelZN Aluminum Zinc NickelTABLE V: DIMENSIONSContact Density No. of Contacts Footprint TypeTABLE III: FILTER TYPESym Filter Type "G" BasicP Pi-Circuit .590 (15.0)C C-Circuit .450 (11.4)H DimBasicK DimBasicTABLE IV: CAPACITOR ARRAY CODEand CAPACITANCE RANGEClass Pi-Section (pF) C-Section (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300M Dim BasicM Dim C FilterEStandard DensityHigh Density9-375015-6278104Mil-Aero .112 (2.8) .056 (1.4) .777 (19.7) .637 (16.2)Euro Style .100 (2.5) .050 (1.3) .765 (19.4) .625 (15.9)Mil-Aero .112 (2.8) .112 (2.8) .889 (22.6) .749 (19.0)Euro Style .100 (2.5) .100 (2.5) .865 (22.0) .725 (18.4)Mil-Aero .078 (2.0) .078 (2.0) .821 (20.9) .625 (15.9)Euro Style .100 (2.5) .100 (2.5) .865 (22.0) .681 (17.3)Mil-Aero .082 (2.1) .123 (3.12) .911 (23.1) .725 (18.4)Euro Style .100 (2.5) .150 (3.81) .965 (24.5) .771 (19.6)Mil-Aero .082 (2.1) .200 (5.08 1.065 (27.1) .825 (21.0)Euro Style .100 (2.5) .164 (4.2) .993 (25.2) .925 (23.5)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-7E-Mail: sales@glenair.com

The Space Shuttle Orbiter escapes earthat the speed of 17,000 miles per hour.Now Arriving on Track 5015!Glenair Series ITSReverse Bayonet ConnectorsEU Sales: Glenair Connectors Italia, S.R.L. Tel: +39-02-91082121 Email: sales-italia@glenair.comNorth American Sales: Glenair Power Products Group, Tel: 203-741-1115 Email: sales@glenair.comFactory Support: Commital S.p.a. (Italy) Tel: +39-51-7821811 Email: commital@commital.comUnited States • United Kingdom • England • Nordic • France • Italy • Spain • Japanwww.glenair.comA World of Interconnect Solutions

Glenair ITS Series Reverse BayonetPower and Signal Filter Connectors (5015 Type)Product Line Overview5015 PowerConnectorsPRODUCT FEATURES• Fast, Easy Bayonet Coupling Connector: 1/4 Turn• Ideal for Rail, Industrial and Military Applications• C Filter Circuits from 200 pF to 120,000 pF• Low-Pass Multilayer Ceramic Planar Array• All Shell Styles: Plug, Square Flange, Jam-Nut, etc.• High Shock and Vibration Resistance• Contact Sizes from #0 to #8 and #12 in limitedInsert Arrangements• Solder-Cup Terminations• Intermateable with Veam CIR, Amphenol GT andITT Cannon CA**B (5015 Type) and all VG 95234Reverse Bayonet ConnectorsFiltered Solutions for Popular MIL-DTL-5015 TypeIndustrial, Rail, and Military Bayonet ConnectorsHarsh Application EnvironmentsThe Glenair Series ITS Reverse Bayonet Power and Signal Connector is ideally suited for allrugged application connections. The reverse bayonet coupling provides faster coupling, especiallywhen the connector is situated in an awkward or hard to reach location. The connector’s highresistance to vibration and shock provides reliable mating in even the most rigorous applicationenvironments. Environmental protection to IP67 levels provides additional reliability. The followingcontact arrangements are presented as examples. Consult factory for additional layouts.ExampleContactArrangementsCABCABCABCABFArrangementContact SizeService Rating20-312D20-198A22-912E36-40A=D; B,C=AContactLegend12 8 0© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-1E-Mail: sales@glenair.com

5015 PowerConnectors240-ITS-JJam Nut Mount Filtered Receptacle Connector(5015 Type) with Reverse Bayonet CouplingMIL-C-5015 TypeTermination TypeS - Solder CupP - PC TailFilter ConnectorProduct CodeShell Material/Finish(See Table II)ContactP - PinS - SocketFilter Type(C-Circuit)Alternative KeyPositionN - Normal240 - ITS - J NF 20-3 P S C D NShell StyleJ - Jam NutJT - Jam Nut withAccessory ThreadInsert ArrangementDash Number20-3, 20-19, 22-9, 36-4Contact factory for updateCapacitance(See Table II)GFD MaxLECØ AØ BLGF BSCFK ThreadO-RingHJ Thread(See Note 5)J/JT - Jam NutSee Note 3APPLICATION NOTES1. Materials/Finishes:Shells - See Table IInsulators - High grade thermoplastic/N.A.Seals - Fluorosilicone/N.A.Contacts - Copper Alloy/Gold Plated2. EMI Circular Filter Connector designed to meet MIL-DTL-50153. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number4. Electrical Performance:A - Capacitance - See Table IIB - I.R. 5000 Megohms min at 200 VDCC - D.W.V. 500 VDC with 100 micro amps max leakage5. Shell style JT shown6. Metric dimensions (mm) are indicated in parentheses© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com F-2E-Mail: sales@glenair.com

240-ITS-JJam Nut Mount Filtered Receptacle Connector(5015 Type) with Reverse Bayonet Coupling5015 PowerConnectorsShellSizeA Ø+.000 -.004(+.000 -.102)B ØMaxTABLE I: DIMENSIONSC±.008 (.203)DMaxE+.008 -.000(+.203 -.000)F±.004 (.102)G+.008 (.203)10SL .719 (18.3) .638 (16.2) .110 (2.8) 1.400 (35.6) .728 (18.5) .719 (18.3) 1.062 (27.0)14S .965 (24.5) .756 (19.2) .130 (3.3) 1.400 (35.6) .728 (18.5) .906 (23.0) 1.312 (33.3)16S 1.071 (27.2) .882 (22.4) .130 (3.3) 1.400 (35.6) .728 (18.5) .969 (24.6) 1.438 (36.5)16 1.071 (27.2) .882 (22.4) .130 (3.3) 1.800 (45.7) .913 (23.2) .969 (24.6) 1.438 (36.5)18 1.209 (30.7) 1.008 (25.6) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.063 (27.0) 1.562 (39.7)20 1.339 (34.0) 1.142 (29.0) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.157 (29.4) 1.688 (42.9)22 1.469 (37.3) 1.268 (32.2) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.250 (31.8) 1.812 (46.0)24 1.610 (40.9) 1.390 (35.3) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.374 (34.9) 2.000 (50.8)28 1.839 (46.7) 1.630 (41.4) .157 (4.0) 1.800 (45.7) .961 (24.4) 1.563 (39.7) 2.250 (57.2)32 2.102 (53.4) 1.882 (47.8) .157 (4.0) 1.800 (45.7) .953 (24.2) 1.750 (44.5) 2.500 (63.5)36 2.346 (59.6) 2.130 (54.1) .157 (4.0) 1.800 (45.7) .953 (24.2) 1.937 (49.2) 2.750 (69.9)40 2.579 (65.5) 2.323 (59.0) .157 (4.0) 1.800 (45.7) .961 (24.4) 2.187 (55.5) 3.000 (76.2)TABLE III: CAPACITORARRAY CODE ANDCAPACITANCE RANGECLASSC - SECTION (pF)X 80,000 - 120,000Y 40,000 - 60,000Z 30,000 - 45,000A 19,000 - 28,000B 16,000 - 22,500C 9,000 - 16,500ShellSizeTABLE I: DIMENSIONS (CONTINUED)MinHMaxJ ØThreadKThread10SL .094 (2.4) .205 (5.2) .6250 - 24 UNEF .8750 - 20 UNEF .441 (11.2)14S .094 (2.4) .295 (7.5) .7500 - 20 UNEF 1.1250 - 18 UNEF .575 (14.6)16S .094 (2.4) .295 (7.5) .8750 - 20 UNEF 1.2500 - 18 UNEF .618 (15.7)16 .094 (2.4) .295 (7.5) .8750 - 20 UNEF 1.2500 - 18 UNEF .618 (15.7)18 .094 (2.4) .354 (9.0) 1.0000 - 20 UNEF 1.3750 - 18 UNEF .661 (16.8)20 .094 (2.4) .354 (9.0) 1.1250 - 18 UNEF 1.5000 - 18 UNEF .709 (18.0)22 .094 (2.4) .358 (9.1) 1.2500 - 18 UNEF 1.6250 - 18 UNEF .795 (20.2)24 .094 (2.4) .358 (9.1) 1.3750 - 18 UNEF 1.7500 - 18 UNS .795 (20.2)28 .094 (2.4) .335 (8.5) 1.6250 - 18 UNEF 2.0000 - 18 UNS .886 (22.5)32 .094 (2.4) .256 (6.5) 1.8750 - 16 UN 2.2500 - 16 UN .972 (24.7)36 .094 (2.4) .327 (8.3) 2.0625 - 16 UN 2.5000 - 16 UN 1.059 (26.9)40 .094 (2.4) .327 (8.3) 2.3125 - 16 UN 2.7500 - 16 UN 1.165 (29.6)ExampleContactArrangementsCABCABLCTABLE II: SHELL MATERIAL/FINISHSymbol Material Finish DescriptionMNFPABAluminumStainless SteelCElectroless NickelCadmium Olive DrabOver Electroless NickelElectro-DepositedNickelABFArrangementContact SizeService Rating20-312D20-198A22-912E36-40A=D; B,C=AContactLegend12 8 0© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-3E-Mail: sales@glenair.com

5015 PowerConnectors240-ITS-WWall Mount Filtered Receptacle Connector(5015 Type) with Reverse Bayonet CouplingMIL-C-5015 TypeTermination TypeS - Solder CupP - PC TailFilter ConnectorProduct CodeShell Material/Finish(See Table II)ContactP - PinS - SocketFilter Type(C-Circuit)Alternative KeyPositionN - Normal240 - ITS - W NF 20-3 P S C D NShell StyleW - Wall MountWT - Wall Mount withAccessory ThreadInsert ArrangementDash Number20-3, 20-19, 22-9, 36-4Contact factory for updateCapacitance(See Table II)D MaxG BSCECØ HThreadØ AØ BF BSCFW/WT - Wall MountSee Note 3See Note 5APPLICATION NOTES1. Material/Finishes:Shells - See Table IInsulators - High grade thermoplastic/N.A.Seals - Fluorosilicone/N.A.Contacts - Copper Alloy/Gold Plated2. EMI Circular Filter Connector designed to meet MIL-DTL-50153. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number4. Electrical Performance:A - Capacitance - See Table IIB - I.R. 5000 Megohms min at 200 VDCC - D.W.V. 500 VDC with 100 micro amps max leakage5. Shell style WT shown6. Metric dimensions (mm) are indicated in parentheses© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com F-4E-Mail: sales@glenair.com

240-ITS-WWall Mount Filtered Receptacle Connector(5015 Type) with Reverse Bayonet Coupling5015 PowerConnectorsShellSizeA Ø+.000 -.004(+.000 -.102)B ØMaxTABLE I: DIMENSIONSC±.008 (.203)DMaxE+.008 -.000(+.203 -.000)F BSC±.004 (.102)G BSC±.008 (.203)H ØThread10SL .719 (18.3) .638 (16.2) .110 (2.8) 1.400 (35.6) .728 (18.5) .719 (18.3) 1.000 (25.4) M414S .965 (24.5) .756 (19.2) .130 (3.3) 1.400 (35.6) .728 (18.5) .906 (23.0) 1.197 (30.4) M416S 1.071 (27.2) .882 (22.4) .130 (3.3) 1.400 (35.6) .728 (18.5) .969 (24.6) 1.280 (32.5) M416 1.071 (27.2) .882 (22.4) .130 (3.3) 1.800 (45.7) .913 (23.2) .969 (24.6) 1.280 (32.5) M418 1.209 (30.7) 1.008 (25.6) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.063 (27.0) 1.378 (35.0) M420 1.339 (34.0) 1.142 (29.0) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.157 (29.4) 1.496 (38.0) M422 1.469 (37.3) 1.268 (32.2) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.250 (31.8) 1.614 (41.0) M424 1.610 (40.9) 1.390 (35.3) .157 (4.0) 1.800 (45.7) .913 (23.2) 1.374 (34.9) 1.752 (44.5) M428 1.839 (46.7) 1.630 (41.4) .157 (4.0) 1.800 (45.7) .961 (24.4) 1.563 (39.7) 2.004 (50.9) M532 2.102 (53.4) 1.882 (47.8) .157 (4.0) 1.800 (45.7) .953 (24.2) 1.750 (44.5) 2.244 (57.0) M536 2.346 (59.6) 2.130 (54.1) .157 (4.0) 1.800 (45.7) .953 (24.2) 1.937 (49.2) 2.500 (63.5) M540 2.579 (65.5) 2.323 (59.0) .157 (4.0) 1.800 (45.7) .961 (24.4) 2.187 (55.5) 2.752 (70.0) M5TABLE III: CAPACITORARRAY CODE ANDCAPACITANCE RANGECLASSC - SECTION (pF)X 80,000 - 120,000Y 40,000 - 60,000Z 30,000 - 45,000A 19,000 - 28,000B 16,000 - 22,500C 9,000 - 16,500TABLE II: SHELL MATERIAL/FINISHSymbol Material Finish DescriptionMNFPAluminumStainless SteelElectroless NickelCadmium Olive DrabOver Electroless NickelElectro-DepositedNickelExampleContactArrangementsCABCABCABCABFArrangementContact SizeService Rating20-312D20-198A22-912E36-40A=D; B,C=AContactLegend12 8 0© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-5E-Mail: sales@glenair.com

5015 PowerConnectors240-515-JJam Nut Mount Filtered Receptacle Connector(5015 Type)MIL-C-5015 TypeTermination TypePS - Pin, Solder CupSS - Socket, Solder CupFilter ConnectorProduct CodeShell Material/Finish(See Table II)Filter Type(C-Circuit)Alternative Key PositionPer MIL-C-5015Omit - Normal240 - 515 - J P 36-4 S C D XShell StyleJ - Jam NutJT - Jam Nut withAccessory ThreadInsert ArrangementDash Number20-3, 20-19, 22-9, 36-4Contact factory for updateCapacitance(See Table III)B Dia2.200 (55.9)MaxDFSee Mil-C-5015for InsertArrangementCJ/JT - Jam NutA ThreadSeeNote 3.180 (4.6).165 (4.2)G Thread(See Note 5).120 (3.0) MaxPanel AccommodationAPPLICATION NOTES1. Materials/Finishes:Shells - See Table IIInsulators - High grade thermoplastic/N.A.Seals - Fluorosilicone/N.A.Contacts - Copper Alloy/Gold Plated2. EMI Circular Filter Connector designed to meet MIL-DTL-50153. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number4. Electrical Performance:A - Capacitance - See Table IIIB - I.R. 5000 Megohms min at 200 VDCC - D.W.V. 500 VDC with 100 micro amps max leakage5. Shell style JT shown6. Metric dimensions (mm) are indicated in parentheses© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com F-6E-Mail: sales@glenair.com

240-515-JJam Nut Mount Filtered Receptacle Connector(5015 Type)5015 PowerConnectorsShellSizeA ThreadClass 2AB Dia±.005 (0.13)TABLE I: DIMENSIONSC±.010 (0.25)D±.005 (0.13)E Dia+.015 (0.38)-.000 (0)F±.005 (0.13)G ThreadClass 2ATABLE III: CAPACITORARRAY CODE ANDCAPACITANCE RANGECLASSC - SECTION (pF)14S .875 - 20 UNEF 1.647 (41.8) 1.125 (28.6) 1.562 (39.7) .880 (22.4) .720 (18.3) 7/8-20 UNEF16S 1.000 - 20 UNEF 1.772 (45.0) 1.250 (31.8) 1.687 (42.8) 1.005 (25.5) .720 (18.3) 1-20 UNEF18 1.125 - 18 UNEF 1.817 (46.2) 1.375 (34.9) 1.812 (46.0) 1.130 (28.7) .970 (24.6) 1 1/16-18 UNEF20 1.250 - 18 UNEF 2.022 (51.4) 1.500 (38.1) 1.937 (49.2) 1.255 (31.9) .970 (24.6) 1 3/16-18 UNEF22 1.375 - 18 UNEF 2.241 (56.9) 1.625 (41.3) 2.156 (54.8) 1.380 (35.1) .970 (24.6) 1 5/16-18 UNEF24 1.500 - 18 UNEF 2.356 (59.8) 1.750 (44.5) 2.281 (57.9) 1.505 (38.2) .970 (24.6) 1 7/16-18 UNEF32 2.000 - 18 UNS 2.856 (72.5) 2.375 (60.3) 2.781 (70.6) 2.005 (50.9) .970 (24.6) 2-18 UNS36 2.250 - 16 UN 2.118 (53.8) 2.875 (73.0) 3.031 (77.0) 2.255 (57.3) .970 (24.6) 2 1/4-16 UN40 2.500 - 16 UN 3.368 (85.5) 2.875 (73.0) 3.281 (83.3) 2.503 (63.6) .970 (24.6) 1 1/2-16 UNX 80,000 - 120,000Y 40,000 - 60,000Z 30,000 - 45,000A 19,000 - 28,000B 16,000 - 22,500C 9,000 - 16,500TABLE II: SHELL MATERIAL/FINISHSymbol Material Finish DescriptionE DiaMNFAluminumElectroless NickelCadmium Olive DrabOver Electroless NickelRECOMMENDEDPANEL CUT-OUTPStainless SteelElectro-DepositedNickelExampleContactArrangementsCABCABCABCABFArrangementContact SizeService Rating20-312D20-198A22-912E36-40A=D; B,C=AContactLegend12 8 0© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-7E-Mail: sales@glenair.com

5015 PowerConnectors240-515-WWall Mount Filtered Receptacle Connector(5015, MS3452 Type)MIL-C-5015 TypeTermination TypePS - Pin, Solder CupSS - Socket, Solder CupFilter ConnectorProduct CodeShell Material/Finish(See Table II)Filter Type(C-Circuit)Alternative Key PositionPer MIL-C-5015Omit - Normal240 - 515 - W P 36-4 SS C D XShell StyleW - Wall MountWT - Wall Mount withAccessory ThreadInsert ArrangementDash Number20-3, 20-19, 22-9, 36-4Contact factory for updateCapacitance(See Table III)4x Ø D.005 MW/WT - Wall MountCMasterKeywayE2.200 (55.9)MaxFFAB SqEBØ GDCFSee Mil-C-5015for InsertArrangementA ThreadSeeNote 3See Note 5APPLICATION NOTES1. Materials/Finishes:Shells - See Table IIInsulators - High grade thermoplastic/N.A.Seals - Fluorosilicone/N.A.Contacts - Copper Alloy/Gold Plated2. EMI Circular Filter Connector designed to meet MIL-DTL-50153. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number4. Electrical Performance:A - Capacitance - See Table IIIB - I.R. 5000 Megohms min at 200 VDCC - D.W.V. 500 VDC with 100 micro amps max leakage5. Shell style WT shown6. Metric dimensions (mm) are indicated in parentheses© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com F-8E-Mail: sales@glenair.com

240-515-WWall Mount Filtered Receptacle Connector(5015, MS3452 Type)5015 PowerConnectorsTABLE I: DIMENSIONSShellSizeA ThreadClass 2AB±.031 (0.78)CSBCD+.010 (0.25)-.005 (0.13)E Dia+.015 (0.38)-.000 (0)F±.015 (0.38)Ø G±.160 (4.06)14S .875 - 20 UNEF 1.188 (30.2) .906 (23.0) .120 (3.0) .562 (14.3) .083 (2.1) .875 (22.2)16S 1.000 - 20 UNEF 1.281 (32.5) .969 (24.6) .120 (3.0) .562 (14.3) .083 (2.1) 1.000 (25.4)18 1.125 - 18 UNEF 1.375 (34.9) 1.062 (27.0) .120 (3.0) .750 (19.1) .125 (3.2) 1.062 (27.0)20 1.250 - 18 UNEF 1.500 (38.1) 1.156 (29.4) .120 (3.0) .750 (19.1) .125 (3.2) 1.187 (30.1)22 1.375 - 18 UNEF 1.625 (41.3) 1.250 (31.8) .120 (3.0) .750 (19.1) .125 (3.2) 1.312 (33.3)24 1.500 - 18 UNEF 1.750 (44.5) 1.375 (34.9) .147 (3.7) .812 (20.6) .125 (3.2) 1.437 (36.5)32 2.000 - 18 UNS 2.250 (57.2) 1.750 (44.5) .173 (4.4) .875 (22.2) .125 (3.2) 2.000 (50.8)36 2.250 - 16 UN 2.500 (63.5) 1.938 (49.2) .173 (4.4) .875 (22.2) .125 (3.2) 2.250 (57.2)40 2.500 - 16 UN 2.750 (69.9) 2.188 (55.6) .173 (4.4) .875 (22.2) .125 (3.2) 2.500 (63.5)TABLE III: CAPACITORARRAY CODE ANDCAPACITANCE RANGECLASSC - SECTION (pF)X 80,000 - 120,000Y 40,000 - 60,000Z 30,000 - 45,000A 19,000 - 28,000B 16,000 - 22,500C 9,000 - 16,500TABLE II: SHELL MATERIAL/FINISHSymbol Material Finish DescriptionMNFPAluminumStainless SteelElectroless NickelCadmium Olive DrabOver Electroless NickelElectro-DepositedNickelExampleContactArrangementsCABCABCABCABFArrangementContact SizeService Rating20-312D20-198A22-912E36-40A=D; B,C=AContactLegend12 8 0© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-9E-Mail: sales@glenair.com

Need something unusual in amulti-contact connector?Then consider Glenair's expertise inhigh reliability connector design and development.Glenair's line of innovative, specialtyconnectors has grown, year afteryear, to become one of the mostdiverse in the industry. Our applicationengineers have worked directly withcommercial, industrial and militarycustomers worldwide to design and buildsuch products as quick disconnects formissile launchers, high temperatureconnectors for jet engines, shorting plugsto prevent accidental weapon firing,explosion-proof bulkhead feed-throughsfor marine and off-shore platform use,and hermetically-sealed MIL-DTL-38999connectors for satellite applications.Miniaturization is our specialty. So, forextraordinary applications, consider anextraordinary partner: Glenair.Commercial and Mil Specconnector accessoriesConvoluted tubing andmetal-core conduitElectrical and fiber opticcable assembliesComposite thermoplasticcomponentsMicrominiature connectorsand accessoriesBackshell assembly andtermination tools1211 Air WayGlendale, California 91201-2497Telephone: 818-247-6000 · Facsimilie: 818-500-9912 · EMail: sales@glenair.comUnited States • United Kingdom • England • Nordic • France • Italy • Spain • Japanwww.glenair.com

Special Purpose and CustomEMI/EMP Filter ConnectorsSpecialConnectorsPRODUCT FEATURES• Special Shell and Flange Configurations• Hybrid Fiber Optic/Electrical Designs• Crimp Removable Contacts• Immersion-Proof Environmental Sealing• Unique Glass Hermetic Versions• PC Tail and PCB Terminations• Rectangular and Circular DesignsFrom Custom Shells to Hybrid Fiber Optic and ElectricalInsert Arrangements, Glenair Has the Capability toProduce Unique EMI/RFI Suppression Connectors to theExact Design Requirements of Your Application.Innovation Born From Over 50 Years of Experience in the InterconnectIndustryThis catalog presents a broad range of standardized interconnect solutions for EMI andEMP filter applications.The ability to offer standard catalog products designed to resolve themost commonly encountered EMI/RFI suppression requirements is a major Glenair strength.Many standard filter connector component elements are stock items, enabling Glenair tooffer lightning fast turnaround on our catalog filter products.But many situations call for special purpose or custom filter connector configurations—everything from unique capacitance values, to integrated TVS diodes or chip technologies.Glenair is equally adept at delivering truly custom filter connector solutions across our entirerange of connector types and styles. This catalog section presents just a small samplingof some of the more interesting designs. Our capabilities in the manufacture of missioncriticalfilter connectors is virtually limitless. Please contact the factory for free applicationengineering assistance.G© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-1E-Mail: sales@glenair.com

SpecialConnectors240-084Ruggedized Power Line Filter IAW MIL-DTL-26482for High-Reliability ApplicationsBasicPart NumberShell StyleA = AdapterConnector ClassSee Table IIShellSizeInsertArrangementFilter OrientationP = Input on Plug SideR = Input on ReceptacleSidePolarizationSee Facing Page240-084 A ME 14 - 02 PS R 10 BContact GenderPS = Pins, Plug SideSP = Sockets, Plug SideCurrent RatingSee Table I1.625 (41.3)Max3.125 (79.4)MaxAB240-084-xxxx06324DatecodeBAAPPLICATION NOTESG1. Connector to be identified with standard marking includingmanufacturer, part number, cage code and date code.2. Metric dimensions (mm) indicated in parentheses.3. Connector interface IAW MIL-DTL-26482, ARR 14-02.4. Material/Finish:Shells/Body - Aircraft grade aluminum/See Table IIContacts – Copper alloy/Gold plated.Insulator – High grade rigid dielectric.Potting – Epoxy compound.Seals – Fluorosilicone.5. Reliability Specifications:Operating temperature range – -10°C to 110°C.Storage temperature range – -25°C to 125°C.Current overload test – 6X rated current for 8 seconds.6. Electrical Specifications:Insulation resistance – 6000 MOHM at 100 VDC.Dielectric withstandsing (line to ground) – 2250 VDCfor 1 minute.Dielectric withstanding (line to line) – 1450 VDCfor 1 minute.© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-2E-Mail: sales@glenair.com

240-084Ruggedized Power Line Filter IAW MIL-DTL-26482for High-Reliability ApplicationsSpecialConnectorsPolarization Keys and Keyways (Receptacle View Shown)105°91°119°75°120°NBCEFSymbolTable I: Filter Specifications and SchematicRated Current (A) Leakage Current Inductance Capacitance@25°C @40°C I (mA) L (mH) CX (uF) CY (nF)ResistanceR (kΩ)1 1.15 1 0.74 12 0.15 4.7 10003 3.45 3 0.74 2.5 0.15 4.7 10006 6.9 6 0.74 1 0.15 4.7 100010 11.5 10 0.74 0.8 0.15 4.7 100012 13.8 12 0.74 0.7 0.15 4.7 100016 18.4 16 0.74 0.65 0.15 4.7 1000Pin A:InputCxRLCxCyShellGndOutputPin B:LCyTable II: Material and FinishSymbol Material FinishMENFAluminumElectroless NickelCadmium O.D. overElectroless NickelG© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-3E-Mail: sales@glenair.com

SpecialConnectors240-085Ruggedized Power Line Filter IAW MIL-DTL-26482for High-Reliability ApplicationsShell StyleA = AdapterShellSizeBasicPart NumberConnector ClassSee Table IIInsertArrangementCurrent RatingSee Table I240-085 A ME 14 - 02 PS 10 BContact GenderPS = Pins on Input, Sockets on OutputSP = Sockets on Input, Pins on OutputPP = Pins on Input, Pins on OutputSS = Sockets on Input, Sockets on OutputPolarizationSee Facing Page1.625Max2.750MaxINPUTOUTPUTAB240-085AXXXX06324DATECODEABAPPLICATION NOTESG1. Connector to be identified with standard marking includingmanufacturer, part number, cage code and date code.2. Metric dimensions (mm) indicated in parentheses.3. Connector interface IAW MIL-DTL-26482, ARR 14-02.4. Material/Finish:Shells/Body - Aircraft grade aluminum/See Table IIContacts – Copper alloy/Gold plated.Insulator – High grade rigid dielectric.Potting – Epoxy compound.Seals – Fluorosilicone.5. Reliability Specifications:Operating temperature range – -10°C to 110°C.Storage temperature range – -25°C to 125°C.Current overload test – 6X rated current for 8 seconds.6. Electrical Specifications:Insulation resistance – 6000 MOHM at 100 VDC.Dielectric withstandsing (line to ground) – 2250 VDCfor 1 minute.Dielectric withstanding (line to line) – 1450 VDCfor 1 minute.© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-4E-Mail: sales@glenair.com

240-085Ruggedized Power Line Filter IAW MIL-DTL-26482for High-Reliability ApplicationsSpecialConnectorsPolarization Keys and Keyways (Receptacle View Shown)105°91°119°75°120°NBCEFSymbolTable I: Filter Specifications and SchematicRated Current (A) Leakage Current Inductance Capacitance@25°C @40°C I (mA) L (mH) CX (uF) CY (nF)ResistanceR (kΩ)1 1.15 1 0.74 12 0.15 4.7 10003 3.45 3 0.74 2.5 0.15 4.7 10006 6.9 6 0.74 1 0.15 4.7 100010 11.5 10 0.74 0.8 0.15 4.7 100012 13.8 12 0.74 0.7 0.15 4.7 100016 18.4 16 0.74 0.65 0.15 4.7 1000Pin A:InputCxRLCxCyShellGndOutputPin B:LCyTable II: Material and FinishSymbol Material FinishMENFAluminumElectroless NickelCadmium O.D. overElectroless NickelG© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-5E-Mail: sales@glenair.com

SpecialConnectors247-039MIL-DTL-38999 Series 1.5(Eurofighter JN Spec)Filtered Wall Mount Receptacle ConnectorMIL-DTL-38999Series 1.5 TypeFilter ConnectorProduct CodeAlternative Key PositionPer MIL-DTL-38999A, B, C, D, or E N - Normal247 - 039 - P NContactP - PinS - SocketPin A.632(16.1)Max.096(2.4)Max.619(15.7).974 (24.7).963 (24.4).020 (.5)26 Pins1.000 (25.4).995 (25.3)1.235(31.4) Max1.235(31.4)Max.118 (3.0)Max Panel Thickness.957 (24.3).949 (24.1)4x Holes.128 (3.3)1.250 (31.8)MaxW - Wall MountG© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-6E-Mail: sales@glenair.com

247-039MIL-DTL-38999 Series 1.5(Eurofighter JN Spec)Filtered Wall Mount Receptacle ConnectorSpecialConnectorsTABLE I: FILTER PERFORMANCECONT.FILTERATT. dBCAP nFNO.TYPE 0.5M 1M 10M 100M 1GAll 112 PI 13 17 48 55 50APPLICATION NOTES1. This drawing describes the requirements for a filtered 26 way Size 20 pincontact, PCB Tail receptacle, complying with Eurofighter J62 .017 (JN1003)shell size 16 connector, polarization position 'N' insert arrangement 26.2. Electrical Characteristics:I. Current rating - each contact at 25° C: 3A DCII. Working voltage - 100 VDC at sea levelIII. Dielectric withstand voltage (DWV) - 250 VDV @ 5 sec.IV. Typical capacitance - per table I +/- 20%V. Attenuation - per MIL-STD-220A (in 50 Ohm system no load) per table I3. Transient Protection:Lines W.V. B.V. C.V. ENERGY1-2 26V @ 50uA DC 31-38V @ 1mA DC 58V @ 30A @ 8/20 us 0.1 J3-13 30V @ 50uA DC 37-46V @ 1mA DC 65V @ 30A @ 8/20 us 0.1 J4. Environmental Requirements:I. Temperature range: -55°C to +125°CII. Shock: 40g x 6mSIII. Vibration: 10g RMS @ 50 to 2000 HzIV. Humidity: up to 95% R.H.5. Materials and finishes in accordance withJ62.017, Summarized as follows:I. Shell: aluminum alloyII. Finish: olive drab cad plate over nickelIII. Contacts: copper alloy gold plate over nickelIV. Insulator: high grade plasticV. Potting: epoxyG© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-7E-Mail: sales@glenair.com

SpecialConnectors247-026MIL-DTL-38999 Series IIIHybrid Fiber Optic/ElectricalFiltered Jam Nut Mount Receptacle ConnectorMIL-DTL-38999Series III TypeFilter ConnectorProduct CodeAlternative Key PositionPer MIL-DTL-38999A, B, C, D, or E N - Normal247 - 026 M P NContactP - PinS - SocketTermination TypeP - Solder CupC - PCB Feed Through1.60 (40.6)Fiber OpticContactsSize 16Insert Arrangement17-8 Per MIL-STD-1560A°R .900(22.9).852 (21.6).126 (3.2).062 (1.6)PanelThicknessSolder Cup "P".200 (5.1) MinD°1.625 (41.3).925 (23.5).921 (23.4)B°.105 (2.7).398(10.1).180 (4.6)C°Filtered ElectricalContacts (Size 16)GJ - Jam Nut© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-8E-Mail: sales@glenair.com

247-026MIL-DTL-38999 Series IIIHybrid Fiber Optic/ElectricalFiltered Jam Nut Mount Receptacle ConnectorSpecialConnectorsTABLE I: FINISH AND MATERIALSSYM MATERIAL FINISH DESCRIPTIONMElectroless NickelNF Aluminum Cadmium O.D. Over Electroless Nickel FinishMTNi-PTFE 1000 Hour Grey TMKEY AND KEYWAY LOCATIONPosition A B C DN 80° 142° 196° 293°A 135° 170° 200° 310°B 49° 169° 200° 244°C 66° 140° 200° 257°D 62° 145° 180° 280°E 79° 153° 197° 272°APPLICATION NOTES1. Materials / Finishes:Shell - See Table IContacts - Copper Alloy / Gold PlateInsulators - High Grade Thermoplastic / N.A.Capacitor Array - Ceramic MetalisationPotting - RTV and EpoxySeals - Flourosilicone2. Assembly to be identified with Glenair's name, part number and date code- space permitting.3. Electrical Performance: PI FilterA. Capacitance - 20 nFB. I.R. 5000 MegOhms at 100 VDCC. DWV - 200 VDCD. Attenuation per MIL-STD-220 at 25° CFrequency Value10 Mhz 20 dB100 Mhz 65 dB1 Ghz >70 dB4. Optical Performance:

SpecialConnectors247-045Dual Bay Micro-D Filter ConnectorRight Angle (90°) Printed Circuit Board Mount4x R .060 (1.5).450 (11.4).330(8.4)2.515 (63.9)1.465 (37.2)1.330 (33.8).865 (22.0).865 (22.0)45°.050 (1.3)6x R .090 (2.3).320(8.1) .145 .055.400 .225 (3.7) (1.4)(10.2) (5.7) .145.055Socket 17x 2-56 UNC-2AThreaded Insert IAW MS1220952.605 (66.2)2.660 (67.6).250 (6.4).223 (5.66) 2.215 (56.3)Position 1.108 (2.7).536 (13.6).100 (2.5)-R-.002 (.05).020 .100(.5) (2.5).083 (2.1).100.050.865 (22.0) .270 (6.9)4x .096 (2.4)Dual BayPlease Consult Factory for Additional Insert Arrangements and Other Options to This Custom Connector DesignAPPLICATION NOTESG1. Interpret Drawing IAW ASME-Y-14.52. Interface Dimensions IAW MIL-DTL-83513/04-C3. Materials and Finishes:Shell - Aluminum Alloy / Tin over Nickel IAW ASTM-B-545Insulators and Potting Trays - Liquid Crystal PolymerContacts - Copper Alloy / Gold over NickelLeads - 25 AWG Copper / Gold PlatedInterfacial Seals - FlourosiliconeHardware - Stainless Steel / PassivatedPotting - HYSOL EE4215, or 2850FT4. Electrical Parameters:Capacitace - Pins 9, 24, 27, 29, 34, 37 and 39 are internally grounded to shell.All remaining pins are to be 16-22.5 nFInsulation Resistance - 5000 MegOhms min. at 100 VDCDielectric Withstand Voltage - 200 VDCInsertion Loss -10 dB @ 10 MHz25 dB @ 100 MHz40 dB @ 1 GHz50 dB @ 10 GHz5. Each assembly to be shipped with 4 rear panel mount jackpostsfor mounting to a .020 thick panel. (See Detail B)6. Part supplied with EMI Spring installed.7. Metric Dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-10E-Mail: sales@glenair.com

247-045Dual Bay Micro-D Filter ConnectorRight Angle (90°) Printed Circuit Board MountSpecialConnectorsSee Detail A+/- .725 (18.4).025 (.6).374 (9.5).196 (5.0).090 (2.286).018 (.46) (25 AWG)Solder Dip Exposed Tails.115 (2.9)+/- .015 (.4).002 (.05).023 (.6).046(1.2) .050 (1.3)2-56 UNC 2B.365 (9.3).119 (3.0)+/- .003 (.08)2-56 UNC 2A.033(.8)Detail A45°.156 (4.0)Detail B.014 (.36) +/- .003 (.08).188 (4.8) +/- .005 (.13)12 21 33 421 11 22 32Mating Face Contact IdentificationGTermination Contact Identification© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-11E-Mail: sales@glenair.com

SpecialConnectors247-070Immersion Proof Micro-D Filter ConnectorRight Angle (90°) Printed Circuit Board MountFilter ConnectorProduct CodeBasicNumberShell Size009 - 9 Position 015 - 15 Position021 - 21 Position 025 - 25 Position031 - 31 Position 037 - 37 PositionShell Plating01 - Cadmium02 - Nickel04 - Gold247 - 070 - 021 - P - G - 02ContactsP - Plug (Pin)S - Receptacle (Socket)Filter Class(See Table I)ABC.725 +/- .025(18.4 +/- .6)F E(G).196 (5.0).249 +/- .015(6.3 +/- .4).374 (9.5).187 +/- .015(4.8 +/- .4)(D).090 (2.3).018 (.46) AWGSolder Dip Exposed Tails.100 (2.5).100 (2.5).100 (2.5) TYP.050 (1.3) TYP.250 (6.4).536 (13.6)2x .096 (2.4)ImmersionProofG2x .129 (3.3).127 (3.2)TSSize 9-5127°26°4XR .100 +/- .005(2.5 +/- .13)© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-12E-Mail: sales@glenair.com

247-070Immersion Proof Micro-D Filter ConnectorRight Angle (90°) Printed Circuit Board MountSpecialConnectorsLAYOUTRECOMMENDED PANEL CUTOUTSS +.004 (.1)-.000 (0)T +.003 (.08)-.003 (.08)W +.004 (.1)-.000 (0)9 .408 (10.4) .565 (14.4) .256 (6.5)15 .558 (14.2) .715 (18.2) .256 (6.5)21 .708 (18.0) .865 (22.0) .256 (6.5)25 .808 (20.5) .965 (24.5) .256 (6.5)31 .958 (24.3) 1.115 (28.3) .256 (6.5)37 1.108 (28.1) 1.265 (32.1) .256 (6.5)TABLE I: CAPACITOR ARRAY CODECAPACITANCE RANGECLASSC - CIRCUIT (pF)A 19,000 - 28,000B 16,000 - 22,500C 9,000 - 16,500D 4,000 - 6,000E 1,650 - 2,500F 400 - 650G 200 - 300DIMENSIONAL TABLESHELLSIZEA +/- .005 (.13) B +/- .005 (.13) C +/- .003 (.08) (D) E +/- .005 (.13) F +/- .005 (.13) (G)9P 1.135 (28.8) .775 (19.7) .565 (14.4) .304 (7.7) .298 (7.6) .655 (16.6) .185 (4.7)9S 1.135 (28.8) .775 (19.7) .565 (14.4) .358 (9.1) .298 (7.6) .655 (16.6) .235 (6.0)15P 1.285 (32.6) .925 (23.5) .715 (18.2) .484 (12.3) .298 (7.6) .655 (16.6) .185 (4.7)15S 1.285 (32.6) .925 (23.5) .715 (18.2) .534 (13.6) .298 (7.6) .655 (16.6) .235 (6.0)21P 1.435 (36.4) 1.075 (27.3) .865 (22.0) .634 (16.1) .298 (7.6) .655 (16.6) .185 (4.7)21S 1.435 (36.4) 1.075 (27.3) .865 (22.0) .684 (17.4) .298 (7.6) .655 (16.6) .235 (6.0)25P 1.535 (39.0) 1.175 (29.8) .965 (24.5) .734 (18.6) .298 (7.6) .655 (16.6) .185 (4.7)25S 1.535 (39.0) 1.175 (29.8) .965 (24.5) .784 (19.9) .298 (7.6) .655 (16.6) .235 (6.0)31P 1.685 (42.8) 1.325 (33.7) 1.115 (28.3) .884 (22.5) .298 (7.6) .655 (16.6) .185 (4.7)31S 1.685 (42.8) 1.325 (33.7) 1.115 (28.3) .934 (23.7) .298 (7.6) .655 (16.6) .235 (6.0)37P 1.835 (46.6) 1.475 (37.5) 1.265 (32.1) 1.034 (26.3) .298 (7.6) .655 (16.6) .185 (4.7)37S 1.835 (46.6) 1.475 (37.5) 1.265 (32.1) 1.084 (27.5) .298 (7.6) .655 (16.6) .235 (6.0)APPLICATION NOTES1. Material/ Finish:Shells - Aluminum Alloy / See P/N Development for PlatingInsulators - LCP / N.A.Contacts - Copper Alloy / Gold PlatedO-Rings - Flourosilicone2. Assembly to be identified with Glenair's name, part number, date code, andpin 1 identification.3. Performance Data per MIL-DTL-8356134. Interface Dimensions per MIL-DTL-835135. Assembly Supplied with 2 Rear Panel Mount JackPosts for 1/16 Thick Panel6. Termination Footprint per Glenair CBR(see Glenair Micro-D catalog or www.glenair.com)7. Plug Assemblies Supplied with EMI Ground Spring.8. Each Assembly to be Supplied with O-Ring Installed.9. All Contacts to have Identical Filter Value. Other FilterArrangements Available - Contact Factory.10. DWV - 100 VDC Min.11. Insulation Resistance: 5000 MegOhms Min. at 200 VDC12. Metric dimensions (mm) are indicated in parentheses.G© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-13E-Mail: sales@glenair.com

SpecialConnectors240-601ARINC 600 Size 1Environmentally Compatible Filter ReceptacleBasicNumberFinishM - Electroless NickelC - Yellow Cadmiumover NickelTerminationP - PC TailS - Solder CupCavityInsert ACavityInsert BCavityInsert C240 - 601 M 045 P - 01PA 01PA 19PAARINC 600:601 - Shell Size 1Key Position3 Digit CodeRef ARINC 600ATT 18Insert Arrangement01 - 2 Digit Code - RefARINC 600 ATT19, and Table IIFilterTopologyP - Low PassPi Type FilterA - FilterCapacitanceClassC - Low PassC Type Filter1.000±.010.650 ±.005.845 ±.0051.550+.000-.015These can beeliminated ifnot requiredG7.440±.0156.350 ±.005Keys suppliedinstalled(or 00=loose)per ARINC600 three-digitinstallationcode(PC Tails)(Solder Cups)4-40 UNC 2BHelicoil inserttyp 6 plØ.125.115Typ 3 plThese can beeliminated ifnot required1.730Can be eliminatedif not required© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-14E-Mail: sales@glenair.com

240-601ARINC 600 Size 1Environmentally Compatible Filter ReceptacleSpecialConnectorsTABLE II: INSERT ARRANGEMENTS12345ABCD12345ABCD12Insert contains grounded coaxnon-filtered6677891T3101112132T41415Insert 0160 #2211Insert 2030 #222 #8AB C DInsert 274 #81Size 8 contacts are removable andmust be specified grounded or nongrounded.All other contacts arenon-removable.23Insert 032 #5 Coax1 #122 #16524345678910Insert 1940 #223Insert 214 #1224TABLE I: CAPACITANCE CODECODE Pi Type Filter (pF) C Type Filter (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300APPLICATION NOTES1. Glenair ARINC 600 receptacle is designed to mate with COTSARINC 600 plug IAW ARINC 600 specification with the sameinsert configuration2. Material/Finish:Shell: Aircraft grade aluminumInsulators: High grade rigid dielectricPC tail and solder cup contacts: Copper alloy/gold over nickel3. Assembly to be permanently identified with (space permitting)Glenair, part number, cavity and contact location, and datecode.4. Insert arrangement in accordance with ARINC 600(arrangement shown for reference only)5. EMI filter receptacle connector designed to meet requirementsof MIL-STD-2120 and ARINC 600.6. Electrical Parameters:Working voltage - 200 VDC, 115 VAC 400HzDielectric withstanding voltage (DWV) - 500 VDC minInsulation resistance (IR) - 5000 Megohms min at 200 VDC7. Custom filter types available (consult factory).8. Additional mounting features available (consult factory).9. Environmental compatibility features:Single piece shell to limit any contaminants or moisture ingressdue to post-processing such as solder wash.Termination area sealed via o-rings around each module.Termination may utilize sealing compound to further aid inenvironmental compatibliltyG© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-15E-Mail: sales@glenair.com

SpecialConnectors240-602ARINC 600 Size 2Environmentally Compatible Filter ReceptacleBasicNumberFinishM - Electroless NickelC - Yellow Cadmiumover NickelTerminationP - PC TailS - Solder CupCavityInsert ACavityInsert BCavityInsert C240 - 602 M 045 P - 02PA 02PA 16PAARINC 600:602 - Shell Size 2Key Position3 Digit CodeRef ARINC 600ATT 18Insert Arrangement02 - 2 Digit Code - RefARINC 600 ATT19, and Table IIFilterTopologyP - Low PassPi Type FilterA - FilterCapacitanceClassC - Low PassC Type Filter1.426±.005.650±.0051.550+.000-.015G6.960±.0156.350±.005Keys suppliedinstalled(or 00=loose)per ARINC600 three-digitinstallationcode(PC Tails)2.130±.005(Solder Cups)© 2008 Glenair, Inc.1.798±.015CAGE Codes 06324GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-16Printed in U.S.A.E-Mail: sales@glenair.com

240-602ARINC 600 Size 2Environmentally Compatible Filter ReceptacleSpecialConnectorsTABLE II: INSERT ARRANGEMENTS123457869111012 13Insert 07100 #22Insert 2420 #204 #8 TwinaxInsert 1624 #2010 #16Insert 136 #8 Twinax(Grounded)Insert blank(for cavity C)Insert 2250 #164 #12Insert 042 #54 #123 #164 #20Insert 02150 #22Insert 15110 #226 #205 #12 (Twinax)Insert 0570 #221 #5 (Coax)Insert 0870 #221 #5 (Coax)Insert blank(for cavityA, B)Insert 1760 #20Insert 1210 #8 Twinax(grounded)Insert 14118 #222 #8 (Twinax)Size 8 contacts are removable andmust be specified grounded or nongrounded.All other contacts arenon-removable.TABLE I: CAPACITANCE CODECODE Pi Type Filter (pF) C Type Filter (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300APPLICATION NOTES1. Glenair ARINC 600 receptacle is designed to mate with COTSARINC 600 plug IAW ARINC 600 specification with the sameinsert configuration2. Material/Finish:Shell: Aircraft grade aluminumInsulators: High grade rigid dielectricPC tail and solder cup contacts: Copper alloy/gold over nickel3. Assembly to be permanently identified with (space permitting)Glenair, part number, cavity and contact location, and datecode.4. Insert arrangement in accordance with ARINC 6005. EMI filter receptacle connector designed to meet or exceedrequirements of MIL-STD-2120 and ARINC 600.6. Electrical Parameters:Working voltage - 200 VDC, 115 VAC 400HzDielectric withstanding voltage (DWV) - 500 VDC minInsulation resistance (IR) - 5000 Megohms min at 200 VDC7. Custom filter types available (consult factory).8. Additional mounting features available (consult factory).9. Environmental compatibility features:Single piece shell to limit any contaminants or moisture ingressdue to post-processing such as solder wash.Termination area sealed via o-rings around each module.Termination may utilize sealing compound to further aid inenvironmental compatibliltyG© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-17E-Mail: sales@glenair.com

151015151015AB CD EF GH JKAB CD EF GH JKAB CD EF GH JKAB CD EF GH JK151015151015151015151015AB CD EF GH JKAB CD EF GH JKAB CD EF GH JKAB CD EF GH JK151015151015SpecialConnectors240-603ARINC 600 Size 3Environmentally Compatible Filter ReceptacleBasicNumberFinishM - Electroless NickelC - Yellow Cadmiumover NickelTerminationP - PC TailS - Solder CupCavityInsert ACavityInsert BCavityInsert CCavityInsert DCavityInsert ECavityInsert F240 - 603 M 045 P - 02PA 02PA 07PA 02PA 02PA 07PAARINC 600:603 - Shell Size 3Key Position3 Digit CodeRef ARINC 600ATT 18Insert Arrangement02 - 2 Digit Code - RefARINC 600 ATT19, and Table IIFilterTopologyP - Low PassPi Type FilterA - FilterCapacitanceClassC - Low PassC Type Filter3.260 ±.0152.886 ±.0051.950 ±.0051.550.650±.005+.000-.015AGLENAIRD14XØ.148 ±.003 6.960 ±.015(Solder Cup)GKeys suppliedinstalled(or 00=loose)per ARINC600 three-digitinstallationcodeBE6.350 ±.005(PC Tail)123412345978116105978116102.130 ±.00512 1312 13CF© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-18E-Mail: sales@glenair.com

240-603ARINC 600 Size 3Environmentally Compatible Filter ReceptacleSpecialConnectorsTABLE II: INSERT ARRANGEMENTS123457869111012 13Insert 07100 #22Insert 2420 #204 #8 TwinaxInsert 1624 #2010 #16Insert 136 #8 Twinax(Grounded)Insert blank(for cavity C)Insert 2250 #164 #12Insert 042 #54 #123 #164 #20Insert 02150 #22Insert 15110 #226 #205 #12 (Twinax)Insert 0570 #221 #5 (Coax)Insert 0870 #221 #5 (Coax)Insert blank(for cavityA, B)Insert 1760 #20Insert 1210 #8 Twinax(grounded)Insert 14118 #222 #8 (Twinax)Size 8 contacts are removable andmust be specified grounded or nongrounded.All other contacts arenon-removable.TABLE I: CAPACITANCE CODECODE Pi Type Filter (pF) C Type Filter (pF)A 38,000 - 56,000 19,000 - 28,000B 32,000 - 45,000 16,000 - 22,500C 18,000 - 33,000 9,000 - 16,500D 8,000 - 12,000 4,000 - 6,000E 3,300 - 5,000 1,650 - 2,500F 800 - 1,300 400 - 650G 400 - 600 200 - 300APPLICATION NOTES1. Glenair ARINC 600 receptacle is designed to mate with COTSARINC 600 plug IAW ARINC 600 specification with the sameinsert configuration and opposite gender2. Material/Finish:Shell: Aircraft grade aluminumInsulators: High grade rigid dielectricPC tail and solder cup contacts: Copper alloy/gold over nickel3. Assembly to be permanently identified with (space permitting)Glenair, part number, cavity and contact location, and datecode.4. Insert arrangement in accordance with ARINC 6005. EMI filter receptacle connector designed to meet or exceedrequirements of MIL-STD-2120 and ARINC 600.6. Electrical Parameters:Working voltage - 200 VDC, 115 VAC 400HzDielectric withstanding voltage (DWV) - 500 VDC minInsulation resistance (IR) - 5000 Megohms min at 200 VDC7. Custom filter types available (consult factory).8. Additional mounting features available (consult factory).9. Environmental compatibility features:Single piece shell to limit any contaminants or moisture ingressdue to post-processing such as solder wash.Termination area sealed via o-rings around each module.Termination may utilize sealing compound to further aid inenvironmental compatibliltyG© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-19E-Mail: sales@glenair.com

SpecialConnectorsARINC 600 ConnectorsPolarizing Positionsof Available Keying PositionsGPlugReceptaclePositionLeft Center Right Left Center RightPost Post Post Post Post Post00 • • • • • •01 1 1 1 4 4 402 2 1 1 4 4 303 3 1 1 4 4 204 4 1 1 4 4 105 5 1 1 4 4 606 6 1 1 4 4 507 1 1 6 5 4 408 2 1 6 5 4 309 3 1 6 5 4 210 4 1 6 5 4 111 5 1 6 5 4 612 6 1 6 5 4 513 1 1 5 6 4 414 2 1 5 6 4 315 3 1 5 6 4 216 4 1 5 6 4 117 5 1 5 6 4 618 6 1 5 6 4 519 1 1 4 1 4 420 2 1 4 1 4 321 3 1 4 1 4 222 4 1 4 1 4 123 5 1 4 1 4 624 6 1 4 1 4 525 1 1 3 2 4 426 2 1 3 2 4 327 3 1 3 2 4 228 4 1 3 2 4 129 5 1 3 2 4 630 6 1 3 2 4 531 1 1 2 3 4 432 2 1 2 3 4 333 3 1 2 3 4 234 4 1 2 3 4 135 5 1 2 3 4 636 6 1 2 3 4 537 1 2 1 4 3 438 2 2 1 4 3 340 4 2 1 4 3 141 5 2 1 4 3 642 6 2 1 4 3 543 1 2 6 5 3 444 2 2 6 5 3 345 3 2 6 5 3 246 4 2 6 5 3 147 5 2 6 5 3 648 6 2 6 5 3 549 1 2 5 6 3 450 2 2 5 6 3 351 3 2 5 6 3 252 4 2 5 6 3 153 5 2 5 6 3 654 6 2 5 6 3 5PlugReceptaclePositionLeft Center Right Left Center RightPost Post Post Post Post Post55 1 2 4 1 3 456 2 2 4 1 3 357 3 2 4 1 3 258 4 2 4 1 3 159 5 2 4 1 3 660 6 2 4 1 3 561 1 2 3 2 3 462 2 2 3 2 3 363 3 2 3 2 3 264 4 2 3 2 3 165 5 2 3 2 3 666 6 2 3 2 3 567 1 2 2 3 3 468 2 2 2 3 3 369 3 2 2 3 3 270 4 2 2 3 3 171 5 2 2 3 3 672 6 2 2 3 3 573 1 3 1 4 2 474 2 3 1 4 2 375 3 3 1 4 2 276 4 3 1 4 2 177 5 3 1 4 2 678 6 3 1 4 2 579 1 3 6 5 2 480 2 3 6 5 2 381 3 3 6 5 2 282 4 3 6 5 2 183 5 3 6 5 2 684 6 3 6 5 2 585 1 3 5 6 2 486 2 3 5 6 2 387 3 3 5 6 2 288 4 3 5 6 2 189 5 3 5 6 2 690 6 3 5 6 2 591 1 3 4 1 2 492 2 3 4 1 2 393 3 3 4 1 2 294 4 3 4 1 2 195 5 3 4 1 2 696 6 3 4 1 2 597 1 3 3 2 2 498 2 3 3 2 2 399 3 3 3 2 2 2100 4 3 3 2 2 1101 5 3 3 2 2 6102 6 3 3 2 2 5103 1 3 2 3 2 4104 2 3 2 3 2 3105 3 3 2 3 2 2106 4 3 2 3 2 1107 5 3 2 3 2 6108 6 3 2 3 2 5© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-20E-Mail: sales@glenair.com

ARINC 600 ConnectorsPolarizing Positionsof Available Keying PositionsSpecialConnectorsPlugReceptaclePositionLeft Center Right Left Center RightPost Post Post Post Post Post109 1 4 1 4 1 4110 2 4 1 4 1 3111 3 4 1 4 1 2112 4 4 1 4 1 1113 5 4 1 4 1 6114 6 4 1 4 1 5115 1 4 6 5 1 4116 2 4 6 5 1 3117 3 4 6 5 1 2118 4 4 6 5 1 1119 5 4 6 5 1 6120 6 4 6 5 1 5121 1 4 5 6 1 4122 2 4 5 6 1 3123 3 4 5 6 1 2124 4 4 5 6 1 1125 5 4 5 6 1 6126 6 4 5 6 1 5127 1 4 4 1 1 4128 2 4 4 1 1 3129 3 4 4 1 1 2130 4 4 4 1 1 1131 5 4 4 1 1 6132 6 4 4 1 1 5133 1 4 3 2 1 4134 2 4 3 2 1 3135 3 4 3 2 1 2136 4 4 3 2 1 1137 5 4 3 2 1 6138 6 4 3 2 1 5139 1 4 2 3 1 4140 2 4 2 3 1 3141 3 4 2 3 1 2142 4 4 2 3 1 1143 5 4 2 3 1 6144 6 4 2 3 1 5145 1 5 1 4 6 4146 2 5 1 4 6 3147 3 5 1 4 6 2148 4 5 1 4 6 1149 5 5 1 4 6 6150 6 5 1 4 6 5151 1 5 6 5 6 4152 2 5 6 5 6 3153 3 5 6 5 6 2154 4 5 6 5 6 1155 5 5 6 5 6 6156 6 5 6 5 6 5157 1 5 5 6 6 4158 2 5 5 6 6 3159 3 5 5 6 6 2160 4 5 5 6 6 1161 5 5 5 6 6 6162 6 5 5 6 6 5PlugReceptaclePositionLeft Center Right Left Center RightPost Post Post Post Post Post163 1 5 4 1 6 4164 2 5 4 1 6 3165 3 5 4 1 6 2166 4 5 4 1 6 1167 5 5 4 1 6 6168 6 5 4 1 6 5169 1 5 3 2 6 4170 2 5 3 2 6 3171 3 5 3 2 6 2172 4 5 3 2 6 1173 5 5 3 2 6 6174 6 5 3 2 6 5175 1 5 2 3 6 4176 2 5 2 3 6 3177 3 5 2 3 6 2178 4 5 2 3 6 1179 5 5 2 3 6 6180 6 5 2 3 6 5181 1 6 1 4 5 4182 2 6 1 4 5 3183 3 6 1 4 5 2184 4 6 1 4 5 1185 5 6 1 4 5 6186 6 6 1 4 5 5187 1 6 6 5 5 4188 2 6 6 5 5 3189 3 6 6 5 5 2190 4 6 6 5 5 1191 5 6 6 5 5 6192 6 6 6 5 5 5193 1 6 5 6 5 4194 2 6 5 6 5 3195 3 6 5 6 5 2196 4 6 5 6 5 1197 5 6 5 6 5 6198 6 6 5 6 5 5199 1 6 4 1 5 4200 2 6 4 1 5 3201 3 6 4 1 5 2202 4 6 4 1 5 1203 5 6 4 1 5 6204 6 6 4 1 5 5205 1 6 3 2 5 4206 2 6 3 2 5 3207 3 6 3 2 5 2208 4 6 3 2 5 1209 5 6 3 2 5 6210 6 6 3 2 5 5211 1 6 2 3 5 4212 2 6 2 3 5 3213 3 6 2 3 5 2214 4 6 2 3 5 1215 5 6 2 3 5 6216 6 6 2 3 5 5G© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-21E-Mail: sales@glenair.com

ttffSpecialConnectors2570-1269ARINC 828MIL-DTL-38999 Series III TypeQuadrax Plug/Receptacle for EFB StandardBasicNumberConnector StyleG6 - Plug00 - Receptacle, Wall Mountwith Slotted HolesInsertArrangementDash No.Alternate Key Positionper MIL-DTL-38999A, B, C, D, or EN - Normal2570 - 1269 NF 00 - 25Q - 17 B AMaterial/FinishM - Al/Electroless NickelNF - Al/O.D. Cadmium over NickelMT - Al/Nickel PTFEXM - Composite/Electroless NickelXW - Composite/O.D. Cadmium over NickelXMT - Composite/Nickel PTFEShellSizeInsert DesignatorA - Pin Insert (Less Contacts)B - Socket Insert (Less Contacts)S1 - Skt Contacts Included, See Table IS2 - Skt Contacts Included, See Table IP1 - Pin Contacts Included, See Table IP2 - Pin Contacts Included, See Table ISRPFIGURE 1: INSERTARRANGEMENTSZNTMpaYULbArrangement 25Q-1736 #22 Contacts6 #8 Quadrax Contacts(J2, J3, J4)cAKdq r s enwvmkuthJgfBVXCHWDGEFGroundingSpring.122.118MasterKeywaySRZPNTUA BCaVdDbcqs eEp wv u g Wn kGF mhYXHML K JKnurl Mfg’s OptionBlue Color Band(See note 6)2Ø1.843MaxM37 X 1.0-6g 0.100RThreadG6 - Plug1.220 Max.400 Maxto End ofContactØ1.890Max.720 Max w/GrommetFollowerGMPXRL3KSZYN 47Arrangement 25Q-20(IAW prEN 3645-001)10 #20 Contacts13 #16 Contacts4 #12 Contacts3 #8 QuadraxContacts(J1)A5WJ61BTH2CUGVDEFMasterKeyway1.8231.7992X 1.500 BscSRZPUA BCaVdDbcqs eEp wv u g Wn kGF mhYXHML K J4X .250/.234 4X .162/.146.005 M.005 MNT2X 1.375 Bsc1.6250-.1P-.3L-TS-2AThread.510 MaxFully MatedIndicator Band Red1.240 Max.791/.736.171.083Blue Color Band(See note 6)00-Wall Mount ReceptacleWith Slotted Holes.400 Maxto End ofContact.720 Max w/GrommetFollowerM37 X 1.0-6g 0.100RThread© 2008 Glenair, Inc.CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-22E-Mail: sales@glenair.com

2570-1269ARINC 828MIL-DTL-38999 Series III TypeQuadrax Plug/Receptacle for EFB StandardSpecialConnectorsARINC 828(Recptacle)J1J2J3J4Glenair Conn P/N(See Notes 3 and 4)Table I: Cross-Reference to ARINC 828 Connectors (Wall Mount ReceptacleQuadrax ContactSocket P/N2570-1269M00-25Q-20BA Not Supplied (To Be Ordered Separately. See Note 5)QtyReference Cable Accommodated2570-1269M00-25Q-20S1A 854-002-02F 3 PIC E51424;TENSOLITE NF24Q100; BMS 13-72T03C04G024*; ECS 422404*2570-1269M00-25Q-20S2A 854-002-04F 3 PIC E50424*; ABS 1503KD24*2570-1269M00-25Q-17BA Not Supplied (To Be Ordered Separately. See Note 5)2570-1269M00-25Q-17S1A 854-002-02F 6 PIC E51424;TENSOLITE NF24Q100; BMS 13-72T03C04G024*; ECS 422404*2570-1269M00-25Q-17S2A 854-002-04F 6 PIC E50424*; ABS 1503KD24*2570-1269M00-25Q-17BB Not Supplied (To Be Ordered Separately. See Note 5)2570-1269M00-25Q-17S1B 854-002-02F 6 PIC E51424;TENSOLITE NF24Q100; BMS 13-72T03C04G024*; ECS 422404*2570-1269M00-25Q-17S2B 854-002-04F 6 PIC E50424*; ABS 1503KD24*2570-1269M00-25Q-17BC Not Supplied (To Be Ordered Separately. See Note 5)2570-1269M00-25Q-17S1C 854-002-02F 6 PIC E51424;TENSOLITE NF24Q100; BMS 13-72T03C04G024*; ECS 422404*2570-1269M00-25Q-17S2C 854-002-04F 6 PIC E50424*; ABS 1503KD24*RecommendedPanel Mounting Holes(Receptacle)1.500BSCBack PanelMounting4X Ø.155/.145Ø1.672 Min.005MTable II: Quadrax Contact Pin P/N for Plug ConnectorQuadrax Contact Pin P/NReference Cable AccommodatedP1 854-001-02F PIC E51424;TENSOLITE NF24Q100; BMS 13-72T03C04G024*; ECS 422404*P2 854-001-04F PIC E50424*; ABS 1503KD24*1.500BSCØ1.484 MinFront PanelMountingTable III: Signal/Power Contact P/N (to be supplied w/ “P * ” or “S * ”)Pin/Socket Contact Size Contact P/NPinSocketAPPLICATION NOTES22 M39029/58-36020 M39029/58-36316 M39029/58-36412 M39029/58-36522 M39029/56-34820 M39029/56-35116 M39029/56-35212 M39029/56-3531. Material/Finishes:Receptacle, Barrel, Coupling Nut - See P/N DevelopmentInsulators - High Grade Rigid DielectricSeals - FluorosiliconeGrounding Spring - BeCu AlloyQuadrax Contacts -Pin - See 854-001-XX (XX Denotes Cable Type, See Table II)Socket - See 854-002-XX (XX Denotes Cable Type,See Table I)Grommet Follower - 687-754-8-XSignal/Power Contacts - When insert designator is P* or S*,the Signal/Power contacts in Table III will be shipped withconnector, as required, along with Quadrax contacts.2. Insert arrangement is in accordance with MIL-STD-1560 andFigure 13. Common EFB connector material/finish IAW ARINC 828 is Al/Electroless Nickel, code "M". Other material/finishes are alsoavailable, see P/N development for ordering.4. All "J*" connectors, as defined in ARINC 828, are receptaclesand their contacts are sockets. The mating plug connectors withpin contacts are not defined in the standard, and can be orderedas shown in P/N development.5. Glenair connector is designed to accept Glenair Quadrax contactsonly.6. Blue color band indicates rear release system.G© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comG-23E-Mail: sales@glenair.com

Ten Reasons to Keep Glenairat the Top of Your List ofBackshell Suppliers1. We offer the lowest total cost of ownershipin the interconnect industry: From our costsaving"no minimum order" policy to our freeproduct samples and application engineering,Glenair provides the best value in connectoraccessories available today.2. Our full spectrum product lines makefor one-stop-shopping: We have the mostcomplete selection of circular and rectangularbackshells and accessories in the world,including every Mil-Spec slash number andmore composite designs than the rest of theindustry combined.3. We have the largest capacity, broadestcapability factory in the business andthe knowledge and expertise to handle anyproduction requirement no matter how largeor complex.4. We've provided complete convenience inordering since 1956 (that's your conveniencenot ours): choose factory direct, your localGlenair office or your favorite distributor.5. We care as much about quality as youdo: Glenair is ISO 9001:200 and AS9100: 2004Rev B Certified.6. We have over 65,000 accessory partnumbers ready for immediate shipmentincluding every AS85049 accessory andthousands of Glenair's most popular rectangularand circular backshell part numbers.7. Our turnaround on quotes and customorders is the fastest in the industry: We offer24 hour turnaround on RFQ's and just 2 to 3weeks delivery on custom orders for everythingfrom dustcaps to EMI shielding accessories.8. We have the largest and most experiencedsupport staff in the business, including salesand engineering in every major market. Weoffer free on-site application engineering andthe support of dedicated product managers forevery interconnect discipline.9. We understand interconnect systemsfrom the ground up: We're the only connector,backshell and accessory supplier to alsooperate our own full service cable harness andconduit assembly facility.10. We're committed: We've served thebackshell and connector accessory marketsince 1956 and we're committed to meeting theevolving needs of our customers.Glenair: A World of Interconnect Solutions

EMI Shielding Accessories:Backshells, Tubular Braid, Shorting Plugsand Other EMI Noise Suppression TechnologiesEMI ShieldingAccessoriesPRODUCT FEATURES• Glenair is the world's largest supplier of EMIshielding backshells and connector accessories.Over 65,000 part numbers are in stock and ready forsame-day shipment• Section includes a small selection of the mostpractical EMI noise suppression and shieldingdevices• Cable shield termination backshells for all filterconnector series• Military standard EMI shielding backshells,shorting plugs and tubular braiding available forcomplete electromagnetic compatibilityBecause the Art of EMI Management Usually Calls forMore Technology Than Just a Filtered ConnectorBackshells: A Part of Every Well-Designed EMI Management SolutionEffective shielding of avionic devices must anticipate both “radiated susceptibility” (thedegree to which outside interference affects the reliable functioning of equipment) and “radiatedemissions” (the extent to which the device itself creates electromagnetic waves which can affectits function). In both cases, the techniques for managing the interference include reflecting thesignals outright, reducing entry points in equipment and cable shields, absorbing the interferencein permeable material and dissipating it as heat, or conducting the EMI along the skin of thedevice/cable and taking it to ground.In practical terms, EMI management is accomplished by plating the skins of cases and cableshields, building up the density (thickness) of shield material, or eliminating line-of-sight entrypoints through which electromagnetic waves can penetrate or escape.In interconnect applications, wires and cables are typically shielded by placing a conductivematerial between the cable conductor and its outer jacket, or by covering individual conductorswithin a cable with shielding material. Again, the purpose of such shielding is to either capturethe EMI and take it to ground or to dissipate the interfering signal as heat. Shields must also beeffectively terminated to the connector backshell lest radiation enter the system at the backshell/connector/shield interface and defeat the purpose of the shield.Glenair understands that the management of EMI usually includes technology aboveand beyond a filterd connector. We offer thousands of EMI management products, and we'veorganized a small selection of some of the most practical devices here for use in conjunction withfiltered connector products.H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-1E-Mail: sales@glenair.com

EMI ShieldingAccessoriesTable I:Backshell Interface DimensionsCONNECTOR DESIGNATORA F HTABLE I: BACKSHELL INTERFACE DIMENSIONSA THREADREFERENCEB DIAMAXC DIAMAXD DIAMAXE DIAMAX08 [9] 7/16 – 28 UNEF .590 (15.) .650 (16.5) .770 (19.6) .690 (17.5)09 [A] M12 x 1 – 6H .650 (16.5) .770 (19.6) .940 (24.8)08 1/2 – 20 UNF .650 (16.5) .650 (16.5) .690 (17.5)03 10 [11] 9/16 – 24 UNEF .720 (18.3) .770 (19.6) .890 (22.6) .820 (20.8)11 [B] M15 x 1 – 6H .770 (19.6) .820 (20.8) 1.060 (26.9)10 5/8 – 24 UNEF .770 (19.6) .770 (19.6) .890 (22.6) .820 (20.8)12 [13] 11/16 – 24 UNEF .840 (21.3) .890 (22.6) 1.020 (25.9) .940 (23.8)13 [C] M18 x 1 – 6H .890 (22.6) .940 (23.9) 1.170 (29.7)12 [7] 3/4 – 20 UNEF .970 (24.6) .940 (23.9) 1.020 (25.9) .940 (23.8)14 [15] 13/16 – 20 UNEF .970 (24.6) 1.020 (29.2) 1.150 (29.2) 1.060 (26.9)15 [D] M22 x 1 – 6H 1.030 (26.2) 1.070 (26.2) 1.290 (32.7)14 [12] 7/8 – 20 UNEF 1.090 (27.7) 1.020 (25.9) 1.150 (29.2) 1.060 (26.9)16 [17] 15/16 – 20 UNEF 1.090 (27.7) 1.150 (29.2) 1.260 (32.0) 1.170 (29.7)17 [E] M25 x 1 – 6H 1.150 (29.2) 1.210 (30.7) 1.420 (36.1)16 [19] 1 – 20 UNEF 1.220 (29.2) 1.210 (30.7) 1.230 (31.2) 1.170 (29.7)18 [27] 18 [19] 1 1/16 – 18 UNEF 1.220 (31.0) 1.230 (31.2) 1.400 (35.6) 1.290 (32.7)19 [F] M28 x 1 – 6H 1.280 (32.5) 1.360 (34.5) 1.540 (39.1)20 [37] 20 [21] 1 3/16 – 18 UNEF 1.340 (34.0) 1.360 (34.5 1.530 (38.9) 1.420 (36.0)21 [G] M31 x 1 – 6H 1.410 (35.8) 1.480 (37.6) 1.670 (42.4)22 22 [23] 1 5/16 – 18 UNEF 1.470 (37.3 1.480 (37.6) 1.600 (40.6) 1.540 (39.1)23 [H] M34 x 1 - 6H 1.530 (38.9) 1.600 (40.6) 2.010 (51.1)24 24 [25] 1 7/16 – 18 UNEF 1.590 (40.4) 1.730 (43.9) 1.940 (49.3) 1.660 (42.2)25 [J] M37 x 1 – 6H 1.660 (42.2) 1.700 (43.2) 2.120 (53.8)61 1 1/2 – 18 UNEF 1.660 (42.2) 1.670 (42.4)28 1 3/4 – 18 UNS 1.970 (50.0) 1.970 (50.0) 2.010 (51.1)32 2 – 18 UNS 2.280 (57.9) 2.220 (56.4) 2.260 (57.4)36 2 1/4 – 16 UN 2.530 (64.3) 2.47 (62.7) 2.530 (64.3)40 2 1/2 – 16 UN 2.780 (70.6) 2.720 (69.1) 3.040 (77.2)H44 2 3/4 – 16 UN 3.030 (77.0) 2.970 (75.4)48 3 – 16 UN 3.220 (81.8) 3.220 (81.8)*Code C, MIL-C-22992, Left-Hand Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-2E-Mail: sales@glenair.com

600-058 and 600-061The BAND-IT ® Clamping SystemHand Banding ToolsEMI ShieldingAccessoriesFast, Cost-Effective Shielding TerminationThe BAND-IT ® clamping system provides quick, easy, costeffectiveand highly reliable termination of braided metallicshielding or fabric braid. Two sizes of banding tools andbands (bands are also available in standard and extendedlengths) allow complete flexibility in terminating EMI shieldingand protective mechanical braiding to fiber optic andelectrical harnesses. Glenair's complete line of BAND-IT ®products are in stock and ready for immediate shipment.Hand Banding Tool 600-058The 600-058 Hand Banding Toolweighs 1.18 lbs., and is designedfor standard clamping bands 600-052 and 600-090 (see page 36) ina tension range from 100 to 180lbs. Calibrate at 150 lbs. ± 5 lbs.for most shield terminations. Tooland band should never be lubricated.6.710(170.4) 2.930(74.4).810(20.6)1.40(35.6)45°.450(11.4)Reference: BAND-IT ® part number A40199.6.750 (171.5).920(23.4)Hand Micro Banding Tool600-061The 600-061 Hand Micro BandingTool weighs 1.18 lbs., and is designedfor micro clamping bands 600-057and 600-083 (see page 36) in atension range from 50 to 85 lbs.Calibrate at 75lbs +2 lbs. -7 lbs. formost shield terminations. Tool andband should never be lubricated.6.710(170.4) 2.930(74.4).810(20.6)1.40(35.6)45°.200(5.1)Reference: BAND-IT ® part number A30199.6.750 (171.5).920(23.4)H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-3E-Mail: sales@glenair.com

EMI ShieldingAccessoriesThe BAND-IT ® Clamping SystemEMI Shield Termination InstructionsH1. Prepare cable braid for terminationprocess (Figure 1).2. Push braid forward over adapterretention lip to the adapter inclinepoint (or .4" [10.2mm] minimumbraid length). Milk braid as requiredto remove slack and ensure a snugfit around the shield termination area(Figure 2).3. Prepare the band in the followingmanner:IMPORTANT: Due to Connector/Adapter circumference, it may benecessary to prepare the bandaround the cable or retentionarea.A. Roll band through the buckle slottwice (bands must be doublecoiled).B. Pull on band until mark ( ) iswithin approximately .250 inch(6.4mm) of buckle slot (Figure3). The band may be tightenedfurther if desired.NOTE: Prepared band shouldhave ( ) mark visible as shownin Figure 3.Shield Termination ClampingProcess (Figures 4 thru 8)NOTE: To free tool handles, moveholding clips to center of tool.4. Squeeze gripper release leverand insert band into the front endopening of the too (NOTE: Circularportion of looped band must alwaysface downward).5. Aligning the band and tool with theshield termination area, squeezeblack pull-up handle repeatedlyusing short strokes until it locksagainst tool body. (This indicatesthe band is compressed to the toolprecalibrated tension).1357AdapterRetention LipConductorsBraidAdapterInclineBuckleTail LengthIndicator MarkNOTE: If alignment of band andshield is unsatisfactory, tension onband can be relaxed by pushing onslotted release lever on top of tool.Make adjustments as necessary andagain, squeeze black pull-up handle.2468.400 (1.2mm) Min.Length Braid OverTermination Area6. Complete the clamping processby squeezing the gray cut-offhandle.7. Remove excess band from tooland dispose.8. Inspect shield termination.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-4E-Mail: sales@glenair.com

600-052, 600-057, 600-090, and 600-083The BAND-IT ® Clamping SystemClamping BandsEMI ShieldingAccessoriesStandard Band 600-052 and Precoiled Standard Band 600-052-1.350 (8.9) Ref.14.256 ± .060(362.1 ± 1.5).156 (4.0) Ref.Tail Length Indicator Mark.240 (6.1) Ref.The 600-052 Standard Band is precisionconstructed of 300 Series SST/Passivate and designedfor use with the 600-058 Hand Banding Tool or the600-067 Pneumatic Banding Tool. Double-wrappedbands will accommodate diameters up to approximately1.8 inches (45.7). Bands may be ordered flat (600-052)or precoiled (600-052-1). Bands come bagged andtagged in quantities from 1 to 100..074 (1.9) Ref. .020 (0.5) Ref.Reference: BAND-IT ® Part Number A10086Extended-Length Standard Band 600-090 and Precoiled Extended-LengthStandard Band 600-090-1.350 (8.9) Ref.18.0 ± .060(457.2 ± 1.5).156 (4.0) Ref.Tail Length Indicator Mark.240 (6.1) Ref.The 600-090 Extended Length StandardBand is precision constructed of 300 Series SST/Passivate, and designed for use with the 600-058 HandBanding Tool or the 600-067 Pneumatic Banding Tool.Double-wrapped bands will accommodate diametersup to approximately 2.5 inches (63.5). Bands may beordered flat (600-090), or precoiled (600-090-1). Bandscome bagged and tagged in quantities from 1 to 100..074 (1.9) Ref. .020 (0.5) Ref.Reference: BAND-IT ® Part Number A11086Micro-Band 600-057 Precoiled Micro-Band 600-057-1.195 (5.0) Ref.8.125 ± .030(206.4 ± 0.8).090 (2.3) Ref.Tail Length Indicator Mark.120 (3.0) Ref.The 600-057 Micro Band is precision constructedof 300 Series SST/Passivate, and designed for usewith the 600-061 Hand Banding Tool or the 600-068Pneumatic Banding Tool. Double-wrapped bands willaccommodate diameters up to approximately .88 inches(22.4). Bands may be ordered flat (600-057), orprecoiled (600-057-1). Bands come bagged and taggedin quantities from 1 to 100..053(1.9) Ref. .015 (0.4) Ref.Reference: BAND-IT ® Part Number A31186Extended Length Micro-Band 600-083 Precoiled Micro-Band 600-083-1.195 (5.0) Ref.14.25 ± .030(362.0 ± 0.8).090(2.3) Ref.Tail Length Indicator Mark.120 (3.0) Ref.The 600-083 Extended Length Micro-Bandis precision constructed of 300 Series SST/Passivate,and designed for use with the 600-061 HandBanding Tool or the 600-068 Pneumatic Banding Tool.Double-wrapped bands will accommodate diametersup to approximately 1.88 inches (47.8). Bands maybe ordered flat (600-083), or precoiled (600-083-1).Bands come bagged and tagged in quantities from 1 to 100.Reference: BAND-IT ® Part Number A31089..053 (1.9) Ref. .015 (0.4) Ref.Metric dimensions (mm) are indicated in parentheses. Consult factory for diameters above 2.5 inches (63.5).© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-5E-Mail: sales@glenair.comH

CompositeBackshells319-064Composite Swing-Arm Backshellwith Shield Sock andSelf-Locking Rotatable CouplingAAFHCONNECTOR DESIGNATOR:MIL-DTL-5015, -26482 Series II,and -83723 Series I and IIIMIL-DTL-38999 Series I, II (see note 3)MIL-DTL-38999 Series III and IVSELF-LOCKINGProduct Series319 - EMI/RFI ShieldSock AssembliesBasic PartNumberFinish Symbol(See Table III)ConnectorShell Size(See Table II)319 H 064 XO 15 B R - 14Split Ring / Band OptionSplit Ring (687-749) and Band(600-052-1) supplied with R option(Omit for none)BROTATABLE COUPLINGConnector DesignatorA, F, and HOptional BraidMaterialOmit for Standard(See Table IV)Custom Braid LengthSpecify In Inches(Omit for Std. 12" Length)CAnti RotationDevice - TYPEMI Shroud TYPA ThreadTYPJ12.00 MinGTerminationArea Free ofCadmiumDKTYPCrimp RingTYPCaptive PositionScrew Locks SwingArm in 45° IncrimentsStandard Shield IAW 107-030Nickel/Copper. See Table III foroptional configuration.Self LockingHardware, TYPETYPClosedDetail "B"Finish XNEF TypH.062 Min.250 MaxScrewProtrusionTYPFSplit Ring687-749Band600-052-1ScrewheadSame Side TYPG© 2009 Glenair, Inc. Printed in U.S.A.CAGE Code 06324GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-12E-Mail: sales@glenair.com

319-064Composite Swing-Arm Backshellwith Shield Sock andSelf-Locking Rotatable CouplingCompositeBackshellsShellSizeA, F HE± .031FMin.TABLE II: SHELL SIZEGMax.HMax.J± .06K Min.(H Code)K Min.(A Code)K Min.(F Code)08 09 .265 (6.7) .22 (5.6) 1.06 (26.9) .98 (24.9) .94 (23.9) .264 (6.7) .265 (6.7) .275 (7.0)10 11 .310 (7.9) .27 (6.9) 1.09 (27.7) 1.05 (26.7) .97 (24.6) .390 (9.9) .370 (9.4) .412 (10.5)12 13 .390 (9.9) .35 (8.9) 1.18 (30.0) 1.20 (30.5) 1.03 (26.2) .504 (12.8) .506 (12.9) .526 (13.4)14 15 .506 (12.9) .47 (11.9) 1.24 (31.5) 1.30 (33.0) 1.09 (27.7) .630 (16.0) .580 (14.7) .657 (16.7)16 17 .591 (15.0) .55 (14.0) 1.32 (33.5) 1.44 (36.6) 1.12 (28.4) .756 (19.2) .705 (17.9) .776 (19.7)18 19 .661 (16.8) .62 (15.7) 1.39 (35.3) 1.56 (39.6) 1.15 (29.2) .843 (21.4) .784 (19.9) .872 (22.1)20 21 .744 (18.9) .70 (17.8) 1.49 (37.8) 1.69 (42.9) 1.18 (30.0) .969 (24.6) .909 (23.1) 1.007 (25.6)22 23 .826 (21.0) .78 (19.8) 1.55 (39.4) 1.77 (45.0) 1.25 (31.8) 1.091 (27.7) 1.034 (26.3) 1.132 (28.8)24 25 .896 (22.8) .85 (21.6) 1.61 (40.9) 1.89 (48.0) 1.28 (32.5) 1.217 (30.9) 1.149 (29.2) 1.257 (31.9)ABTABLE III: FINISHCSymbolFinishXBXMTXNComposite Material–No Plating, ColorBlack, Brass Interface Shroud andAdapter–Nickel Plated2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer.1000 Hour Grey TMComposite Material–No Plating, ColorBlack and Brown, Brass InterfaceShroud and Adapter–SelectivelyCadmium Plated(See Detail B)TABLE IV: BRAID TYPESymbolBraid TypeA 100% AmberStrand ®B 75%/25% AmberStrand ® BlendL100% ArmorLite TMStandard Nickel/Copper 34awgTTin/Copper 34awgDXOComposite Material–No Plating, ColorBlack and Brown, Brass InterfaceShroud and Adapter–Nickel PlatedENOTES1. See Table I in Intro for front-end dimensional details.2. See composite thermoplastic shield sock assembly procedure for detailed installation instructions.3. Add mod code -475 to end of part number for use with Series II connectors. Backshell to be supplied less shroud.4. Coupling nut supplied unplated.F© 2009 Glenair, Inc. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-13E-Mail: sales@glenair.comG

EMI ShieldingAccessories319-065Self-Locking Rotatable CouplingComposite Swing-Arm Strain Relief withComposite EMI/RFI Shield Sock & Optional Split RingCONNECTOR DESIGNATOR:A - MIL-DTL-5015 / -26482 / -83723F - MIL-DTL-38999 Series I, IIH - MIL-DTL-38999 Series III and IVSELF-LOCKINGROTATABLECOUPLINGProductSeriesConnector Designator(A, F and H)BasicNumberShell Size(See Table I)319 A 065 XO 16 RFinish Symbol(See Table III)TerminationR - Split Ring (687-207)and Band (600-052)Supplied(Omit if Not Required)Anti-Rotation Device (Typ)EMI Shroud (Typ)A Thread (Typ)U.S. PATENT NO. 6419519LJ G CaptivatedSelf-LockingTelescopingScrews (Typ)DF(Typ)H Flats(Typ)B K(Typ) (Typ)StraightPositionComposite75% - 25% BraidE (Typ)Closed.062(1.8) Min.250(6.4) MaxScrewProtrusion(Typ)90° PositionCaptive Position-Screw locks SwingArm in 45° increments(See Notes 2, 3)Screw Headsame side(Typ)45° Position(See Note 2)HOptional SplitRingP/N687-207(Page H-16)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-8E-Mail: sales@glenair.com

319-065Self-Locking Rotatable CouplingComposite Swing-Arm Strain Relief withComposite EMI/RFI Shield Sock & Optional Split RingEMI ShieldingAccessoriesShell Size forConnectorDesignator*A F H08 08 0910 10 1112 12 1314 14 1516 16 1718 18 1920 20 2122 22 2324 24 25B Dia DMax Max.812 (20.6) .980 (24.9).938 (23.8) 1.050 (26.7)1.125 (28.6) 1.200 (30.5)1.250 (31.8) 1.300 (33.0)1.375 (34.9) 1.440 (36.6)1.500 (38.1) 1.560 (39.6)1.625 (41.3) 1.690 (42.9)1.750 (44.5) 1.770 (45.0)1.875 (47.6) 1.890 (48.0)See Page H-2 for Table I: Backshell Interface DimensionsTABLE I: CONNECTOR SHELL SIZE ORDER NUMBERE±.06 (1.5).265 (6.7).310 (7.9).390 (9.9).506 (12.9).591 (15.0).661 (16.8).744 (18.9).826 (21.0).896 (22.8)F GH FlatsJ KLMin Max Max Min ±.06 (1.5) Ref Min.220 (5.9) 1.060 (26.9).270 (6.9) 1.090 (27.7).750 (19.1).875 (22.2).736 (18.7).860 (21.8).940 (23.9).970 (24.6).265 (6.7).370 (9.4)7.000 (177.8)7.000 (177.8).350 (8.9) 1.180 (30.0) 1.000 (25.4) .980 (24.9) 1.030 (26.2) .506 (12.9) 7.000 (177.8).470 (11.9) 1.240 (31.5) 1.125 (28.6) 1.100 (27.9) 1.090 (27.7) .580 (14.7) 9.000 (228.6).550 (14.0) 1.320 (33.5) 1.250 (31.8) 1.224 (31.1) 1.120 (28.4).620 (15.7) 1.390 (35.3) 1.375 (34.9) 1.469 (37.3) 1.150 (29.2).700 (17.8) 1.550 (39.4) 1.500 (38.1) 1.500 (38.1) 1.180 (30.0).705 (17.9) 11.000 (279.4).784 (19.9) 11.000 (279.4).909 (23.1) 11.000 (279.4).780 (19.8) 1.550 (39.4) 1.625 (41.3) 1.581 (40.2) 1.250 (31.8) 1.034 (26.3) 11.000 (279.4).850 (21.6) 1.610 (40.9) 1.750 (44.5) 1.960 (49.8) 1.280 (32.5) 1.149 (29.2) 11.000 (279.4)**Consult factory for additional entry sizes available.SymbolXBXMT*XNXOTABLE II: FINISHESFinishComposite Material, No Plating,Color Black, Brass InterfaceShroud and Adapter - NickelPlatedNi-PTFE 1000 Hour Grey TM(Nickel-Fluorocarbon PolymerComposite Material, No Plating,Color Black and Brown, BrassInterface Shroud and Adapter -Selectively Cadmium PlatedComposite Material, No Plating,Color Black and Brown, BrassInterface Shroud and Adapter -Nickel PlatedXW*Cadmium Olive Drab overElectroless Nickel* Note: Coupling Nut, Saddle Barsand Arms supplied unplated.1.2.3.APPLICATION NOTESGlenair series 600 Backshell assembly Tools are recommended forassembly and installation.Swing Arm locks in 45° increments–Sizes 08 thru 24, additional positioningincrements are manufacturer's option.Captive Screw remains engaged to the body when positioning theArm. When tightened, the Screw shall not protrude into the insidesurfaces.4. Fits Connector Designators: MIL-DTL-38999 Series I, II(F), MIL-DTL-38999 Series III and IV (H), MIL-DTL-5015(A), and MIL-DTL-26482 (A)Metric dimensions (mm) are in parentheses and are for reference only.H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-9E-Mail: sales@glenair.com

CompositeBackshells319-138"Wide Mouth" Composite Swing-Arm Strain Reliefwith Shield Sock andSelf-Locking Rotatable CouplingAAFHCONNECTOR DESIGNATOR:MIL-DTL-5015, -26482 Series II, and-83723 Series I and IIIMIL-DTL-38999 Series I, II (see note 3)MIL-DTL-38999 Series III and IVSELF-LOCKINGROTATABLE COUPLINGProduct Series319 - EMI/RFI ShieldSock AssembliesConnector DesignatorA, F, and HFinish Symbol(See Table III)Custom Braid LengthSpecify In Inches(Omit for Std. 12" Length)Optional Braid MaterialB - See Table IV for Options(Omit for Std. Nickel/Copper)319 H 138 XO 15 B R - 8BLOW PROFILEBasic PartNumberConnectorShell Size(See Table II)Split Ring / Band OptionSplit Ring (687-749) and Band(600-052-1) supplied with R option(Omit for none)CAnti-Rotation DeviceEMI Shroud12.00 MinStandard Shield LengthJGHFKEClosedDScrew Locks Armin 45° IncrementsStandard ShieldIAW 107-030 Ni/Cu(See Table III foroptional materials)Self-LockingHardware.062 Min.250 MaxScrew ProtrusionCrimp RingEClamp Body, Arm,Coupling Nut andSaddles: Black ColorTermination AreaFree of CadmiumDetail BFinish XNFL BetweenBody EarsCross RecessedScrew HeadSame SideSplit Ring(687-749)Band(600-052-1)G© 2009 Glenair, Inc. Printed in U.S.A.CAGE Code 06324GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-24E-Mail: sales@glenair.com

319-138"Wide Mouth" Composite Swing-Arm Strain Reliefwith Shield Sock andSelf-Locking Rotatable CouplingCompositeBackshellsTABLE II: SHELL SIZEShell SizeGKEFHJLMaxDiameter± .031 Min± .060 Max MaxA, F H ± .06A Code F Code H Code08 09 .350 (8.9) .350 (8.9) 1.045 (26.5) .936 (23.8) .94 (23.9) .393 (10.0) .265 (6.7) .275 (7.0) .264 (6.7)10 11 .436 (11.1) .455 (11.6) 1.045 (26.5) 1.172 (29.8) .97 (24.6) .455 (11.6) .370 (9.4) .412 (10.5) .390 (9.9)12 13 .636 (16.2) .640 (16.3) 1.170 (29.7) 1.406 (35.7) 1.03 (26.2) .598 (15.2) .506 (12.9) .526 (13.4) .504 (12.8)14 15 .706 (17.9) .710 (18.0) 1.170 (29.7) 1.500 (38.1) 1.09 (27.7) .710 (18.0) .580 (14.7) .651 (16.5) .630 (16.0)16 17 .790 (20.1) .835 (21.2) 1.295 (32.9) 1.562 (39.7) 1.12 (28.4) .839 (21.3) .705 (17.9) .776 (19.7) .756 (19.2)18 19 .872 (22.1) .922 (23.4) 1.295 (32.9) 1.687 (42.8) 1.15 (29.2) .934 (23.7) .784 (19.9) .872 (22.1) .843 (21.4)20 21 .996 (25.3) 1.008 (25.6) 1.467 (39.5) 1.969 (50.0) 1.18 (30.0) 1.068 (27.1) .909 (23.1) 1.007 (25.6) .969 (24.6)22 23 1.060 (26.9) 1.197 (30.4) 1.467 (39.5) 2.094 (53.2) 1.25 (31.8) 1.197 (30.4) 1.034 (1.034) 1.132 (28.8) 1.091 (27.7)24 25 1.123 (28.5) 1.323 (33.6) 1.461 (37.1) 2.281 (57.9) 1.28 (32.5) 1.323 (33.6) 1.149 (29.2) 1.257 (31.9) 1.217 (30.9)ABTABLE III: FINISHCSymbolFinishXBXMTXNComposite Material–No Plating,Color Black, Brass Interface Shroudand Adapter–Nickel Plated2000 Hour Corrosion ResistantNi-PTFE, Nickel-FluorocarbonPolymer. 1000 Hour Grey TMComposite Material–No Plating,Color Black and Brown, BrassInterface Shroud and Adapter–Selectively Cadmium Plated(See Detail B)TABLE IV: BRAID TYPESymbolBraid TypeA 100% AmberStrand ®B 75%/25% AmberStrand ® BlendL100% ArmorLite TMStandard Nickel/Copper 34awgTTin/Copper 34awgDENOTES1. See Table I in Intro for front-end dimensional details.2. See composite thermoplastic shield sock assembly procedure for detailed installation instructions.3. Add mod code -475 to end of part number for use with Series II connectors. Backshell to be supplied less shroud.4. Coupling nut supplied unplated.F© 2009 Glenair, Inc. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comA-25E-Mail: sales@glenair.comG

EMI ShieldingAccessoriesComposite ThermoplasticUser Adjustable Swing-Arm AssemblyTechnical InformationConductorTape Wrap under Ringto Ensure FitFigure 1Glenair Swing-ArmOffers Extremely Fast andTrouble-Free Terminationof EMI Shielding:Overall Braidfrom Backshell600-052Overall Braid from WireBundle (If Applicable)Optional Tape Wrap687-207 Split ShieldSupport RingChoose Straight, 45° or 90° angle, andtighten screws to lock arms in place. Leavethe saddle clamp hardware loose.Next, insert the wire bundle into thebackshell to determine if the braid transitionangle from the backshell to wire bundle isless than 45º. If it is less than 45°, build upthe wire bundle with tape and re-insert wirebundle into backshell to support the transitionof overall braid from the backshell to the wirebundle.Tuck Braidas ShownLacing String or HighTemperature Ty-StrapFigure 2SupportRingHLoosely assembly the adapter to theconnector and push back the backshell braid.Insert the wire bundle into the adapter andbottom it against the connector. Holding thecable, mark or tag the location where theshield support ring (Glenair Part Number687-207) will be located. This distance mayvary depending on your technique and theflexibility of the wire bundle immediately tothe rear of the saddles (Figure 1).ShieldPigtailFigure 3ConductorsLacing String or HighTemperature Ty-StrapEqually SpacePigtails Around Ring© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-12E-Mail: sales@glenair.com

Composite ThermoplasticUser Adjustable Swing-Arm AssemblyTechnical InformationEMI ShieldingAccessories45°Lacing String or HighTemperature Ty-StrapStaggerSolderSleevesFigure 490°Caution:Loosen saddle clamps toallow free cable movementbefore adjusting clamp toangular positions. Formthe cable into the desiredconfiguration, then tightenarms and secure thesaddle clamps.At the marked location, near the shieldsupport ring, wrap tape around wire bundlefor snug fit of shield support ring (Figure 1).Tape wrap is optional.You can then slide the overall braidfrom the wire bundle side over the shieldsupport ring, trimming braid ends and tuckingextra braid underneath itself for a cleanappearance.For pin connectors, slide the backshellforward, and hand tighten backshell toconnector. Then, evenly space shield pigtails(Figure 3) or solder sleeve pigtails (Figure4) around the shield support ring. Cut thepigtails so that the end of the pigtails slightlybeyond end of shield support ring.Bring the shield sock from backshell andcompletely cover the pigtails and supportring. Trim and fold the braid as shown inFigure 2. Lace tie the shield adjacent tosupport ring ends.Install Glenair's Band-it ® band (600-052) between the lace ties onto the centerof the support ring as shown in Figure2. The hand banding tool (600-058) orpneumatic banding tool (600-067) is usedfor this banding process.Next, you can wrap the shield supportring assembly with high temperature tape.Place lacing cord, high temperature tape,or high temperature plastic Ty-Strapson the braid transition to the rear of thebackshell to secure the overbraid on wirebundle. If you wish, you can cover theoverbraid with 102-080 braid sock.Tighten the adapter to the connectorusing Glenair 600-091 composite hexcoupling torque wrench and related toolingaccessories to established torque values.Secure the strain relief saddle onto thewire bundle using TG69 soft jaw pliers.Torque the saddle screws to establishedvalues. You can use Teflon tape wrap orM85049/127 bushing strip as needed tocushion the braid sock under the saddleclamps.With these few steps, your Swing-Armstrain relief installation is complete!H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-13E-Mail: sales@glenair.com

EMI ShieldingAccessories380-107EMI/RFI Non-Environmental Backshellwith Strain ReliefType D - Self-Locking - Rotatable Coupling - Split ShellCONNECTOR DESIGNATOR:A - MIL-DTL-5015 / -26482 / -83723F - MIL-DTL-38999 Series I, IIH - MIL-DTL-38999 Series III and IVSELF-LOCKINGROTATABLECOUPLINGSPLIT SHELLULTRA-LOW PROFILESELF-LOCKINGTYPE D INDIVIDUALOR OVERALLSHIELD TERMINATIONProductSeries380 - F D - 107 M 16 05 FConnectorDesignatorAngle and ProfileC - Ultra Low Splirt 90°D - Split 90°F - Split 45°A Thread(Table I)E Typ.(Table I)BasicNumberF(Table III)Finish(See Table II)Shell Size(See Table I)G (Table III)Cable Entry(See Tables IV, V)Strain ReliefStyleF or G.88 (22.4) MaxAnti-RotationDevice (Typ.)Split 45°STYLE 2(See Note 1)H(Table III)M(Table III)K(Table III)STYLE FLight Duty(Table IV).416 (10.5)MaxSTYLE GLight Duty(Table V).072 (1.8)MaxSplit 90°J (Table III)Max WireBundle(Table III,Note 1)L(TableIII)CableRangeNCableEntryPHUltra Low-ProfileSplit 90°© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-14E-Mail: sales@glenair.com

380-107EMI/RFI Non-Environmental Backshellwith Strain ReliefType D - Self-Locking - Rotatable Coupling - Split ShellEMI ShieldingAccessoriesSee Page H-2 for Table I: Backshell Interface DimensionsSymbolBMNFMTTABLE II: FINISHESFinishCadmium Plate, Olive DrabElectroless NickelCadmium Plate, Olive Drabover Electroless NickelNickel Flourocarbon polymer (Ni-PTFE)ShellSize08/0910/1112/1314/1516/1718/1920/2122/2324/25FMax.596 (15.1).656 (16.7).716 (18.2).776 (19.7).836 (21.2).906 (23.0).976 (24.8)1.036 (26.3)1.096 (27.8)GMax1.730 (43.9)1.785 (45.3)1.855 (47.1)1.887 (47.9)1.987 (50.5)2.045 (51.9)2.106 (53.5)2.167 (55.0)2.225 (56.5)HMax.836 (21.2).906 (23.0).966 (24.5)1.026 (26.1)1.086 (27.6)1.156 (29.4)1.216 (30.9)1.276 (32.4)1.336 (33.9)TABLE III: DIMENSIONSJMax1.670 (42.4)1.725 (43.8)1.795 (45.6)1.827 (46.4)1.927 (48.9)1.985 (50.4)2.046 (52.0)2.107 (53.5)2.165 (55.0)KMax.496 (12.6).426 (10.8).426 (10.8).436 (11.1).576 (14.6).796 (20.2).796 (20.2).696 (17.7).696 (17.7)LMax1.920 (48.8)2.080 (52.8)2.080 (52.8)2.150 (54.6)2.200 (55.9)2.230 (56.6)2.230 (56.6)2.380 (60.5)2.380 (60.5)MMax.837 (21.3).887 (22.5).887 (22.5).987 (25.1)1.137 (28.9)1.337 (34.0)1.337 (34.0)1.337 (34.0)1.337 (34.0)Function C MaxWire Bundle.250 (6.4).375 (9.5).375 (9.5).500 (12.7).625 (15.9).625 (15.9).625 (15.9).750 (19.1).750 (19.1)DashNo.0203040506070810TABLE IV: CABLE ENTRYNMax.968 (24.6)1.046 (26.6)1.156 (29.4)1.218 (30.9)1.343 (34.1)1.468 (37.3)1.593 (40.5)1.843 (46.8)Min.125 (3.2).250 (6.4).312 (7.9).437 (11.1).562 (14.3).687 (17.4).812 (20.6)1.062 (27.0)Cable RangeMax.250 (6.4).375 (9.5).500 (12.7).625 (15.9).750 (19.1).875 (22.2)1.000 (25.4)1.250 (31.8)DashNo.01020304050607080910TABLE V: CABLE ENTRYPMax.656 (16.7).781 (19.8).906 (23.0)1.031 (26.2)1.156 (29.4)1.281 (32.5)1.406 (35.7)1.531 (38.9)1.656 (42.1)1.781 (45.2)Cable EntryMax.125 (3.2).250 (6.4).375 (9.5).500 (12.7).625 (15.9).750 (19.1).875 (22.2)1.000 (25.4)1.125 (28.6)1.250 (31.8)APPLICATION NOTES1. When maximum cable entry is exceeded (not available in Function C), Style 2will be supplied. Dimensions F, G, H and J will not apply. Please consult factory.2. Metric dimensions (mm) are indicated in parentheses.3. Cable range is defined as the accommodations range for the wire bundle or cable.Dimensions shown are not intended for inspection criteria.4. Angular function "C", low-profile split elbow, not available with "S" connector designator.H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-15E-Mail: sales@glenair.com

EMI ShieldingAccessories440-069EMI/RFI Banding and Shrink Boot AdapterSelf-Locking Rotatable Coupling - Full Radius ProfileProductSeriesConnectorDesignatorBasicNumberShell Size(See Table I)Cable TerminationB - BandK - Precoiled Band(Omit for None)Shrink Boot(See Table IV)Omit for None440 - F N - 069 M 20 12 B P TAngle and ProfileM - 45ºN - 90ºFinish(See Table II)Cable Entry(See Table IV)PolysulfideP - Polysulfide(Omit for None)CONNECTOR DESIGNATOR:A - MIL-DTL-5015 / -26482 / -83723F - MIL-DTL-38999 Series I, IIH - MIL-DTL-38999 Series III and IVSELF-LOCKINGROTATABLECOUPLINGFULL RADIUS PROFILEH(Table III)J(Table III)A Thread(Table I)E Typ.(Table I)F(Table III)G (Table III).380(9.7).060(1.5)K* .135 (3.4)L*M** (Table IV).075 (1.9) Ref.Anti-RotationDevice (Typ.)1.000 (25.4)MaxTermination Area Freeof Cadmium. Knurl orRidges Mfr's OptionSTYLE 2(See Note 1)Band Option(K Option Shown -See Note 6)HPolysulfide StripesP Option© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-16E-Mail: sales@glenair.com

440-069EMI/RFI Banding and Shrink Boot AdapterSelf-Locking Rotatable Coupling - Full Radius ProfileEMI ShieldingAccessoriesSee Page H-2 for Table I: Backshell Interface DimensionsShell SizeConn. Desig.A-F-L081012141618202224DashNo.013102320333043405350636073708380910111213141516H091113151719212325K.125 (3.2).188 (4.8).250 (6.4).312 (7.9).375 (9.5).438 (11.1).500 (12.7).562 (14.3).625 (15.9).688 (17.5).750 (19.1).812 (20.6).875 (22.2).938 (23.8)1.000 (25.4)1.062 (27.0)1.125 (28.6)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)1.875 (47.6)2.000 (50.8)TABLE III: ELBOW DIMENSIONSFMax.968 (24.6)1.031 (26.2)1.094 (27.8)1.156 (29.4)1.218 (30.9)1.250 (31.8)1.312 (33.3)1.344 (34.1)1.406 (35.7)TABLE IV: CABLE ENTRYL.250 (6.4).312 (7.9).375 (9.5).438 (11.1).500 (12.7).562 (14.3).625 (15.9).688 (17.5).750 (19.1).812 (20.6).875 (22.2).938 (23.8)1.000 (25.4)1.062 (27.0)1.125 (28.6)1.188 (30.2)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)1.875 (47.6)2.000 (50.8)2.125 (54.0)GMax1.017 (25.8)1.071 (27.2)1.121 (28.5)1.175 (29.8)1.224 (31.1)1.274 (32.4)1.328 (33.7)1.382 (35.1)1.431 (36.3)M.312 (7.9).374 (9.5).437 (11.1).500 (12.7).562 (14.3).624 (15.8).687 (17.4).750 (19.1).812 (20.6).874 (22.2).937 (23.8)1.000 (25.4)1.062 (27.0)1.124 (28.5)1.187 (30.1)1.250 (31.8)1.312 (33.3)1.437 (36.5)1.562 (39.7)1.687 (42.8)1.812 (46.0)1.937 (49.2)2.062 (52.4)2.187 (55.5)HMax1.281 (32.5)1.406 (35.7)1.531 (38.9)1.656 (42.1)1.781 (45.2)1.906 (48.4)2.031 (51.6)2.156 (54.8)2.281 (57.9)* Shrink Boot Supplied with “T” Option(see Part Number Development)ShrinkBoot*770-003S111770-003S111770-003S112770-003S112770-003S112770-001S104770-001S104770-001S104770-001S104770-001S104770-001S105770-001S105770-001S105770-001S105770-001S106770-001S106770-001S107770-001S107770-001S107770-001S107770-001S108770-001S108770-001S109770-001S109JMax1.335 (33.9)1.460 (37.1)1.585 (40.3)1.710 (43.4)1.835 (46.6)1.960 (49.8)2.085 (53.0)2.210 (56.1)2.335 (59.3)GlenairSymbolBMNF1. When maximum cableentry is exceeded,Style 2 will be supplied.Dimensions F, G, H andJ will not apply. Pleaseconsult factory.2. Metric dimensions(mm) are indicated inparentheses.3. Interface O-Ring notsupplied with ConnectorDesignator A.4. Consult factory forshorter lengths onstraight backshells.5. Backshells suppliedwith 600-052-* band,see Glenair Series600 Tool Catalog forinstallation.TABLE II: FINISHESFinishCadmium Plate, Olive DrabElectroless NickelCadmium Plate, Olive Drabover Electroless NickelNi-PTFE 1000 Hour GreyMTTMNickel Fluorocarbon PolymerConsult Factory for Additional Finish OptionsH© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-17E-Mail: sales@glenair.com

EMI ShieldingAccessories440-069EMI/RFI Banding and Shrink Boot AdapterSelf-Locking Rotatable Coupling - Split ShellProductSeriesConnectorDesignatorBasicNumberShell Size(See Table I)Cable TerminationB - BandK - Precoiled Band(Omit for None)Shrink Boot(See Table IV)Omit for None440 F D 069 M 20 12 B P TAngle and ProfileC - Ultra Low Split 90°D - Split 90°F - Split 45°CONNECTOR DESIGNATOR:A - MIL-DTL-5015 / -26482 / -83723F - MIL-DTL-38999 Series I, IIH - MIL-DTL-38999 Series III and IVSELF-LOCKINGROTATABLECOUPLINGSPLIT SHELLULTRA-LOW PROFILEFinish(See Table II)Max Wire Bundle(Table III, Note 1)M(Table III)K(Table III)Cable Entry(See Table IV)L(Table III)PolysulfideP - Polysulfide(Omit for None)STYLE 2(See Note 1)1.000 (25.4)MaxA Thread(Table I)E Typ.(Table I)F(Table III)G(Table III)Ultra Low-ProfileSplit 90°H(Table III)Anti-RotationDevice (Typ.)Termination Area Freeof Cadmium. Knurl orRidges Mfr's OptionSplit 45°Split 90°.380(9.7)J (Table III)HPolysulfide StripesP OptionBand Option(K Option Shown -See Note 5).060(1.5)N*P*R*(*Table IV)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-18E-Mail: sales@glenair.com

440-069EMI/RFI Banding and Shrink Boot AdapterSelf-Locking Rotatable Coupling - Split ShellEMI ShieldingAccessoriesSee Page H-2 for Table I: Backshell Interface DimensionsShellSize08/0910/1112/1314/1516/1718/1920/2122/2324/25DashNo.013102320333043405350636073708380910111213141516FMax.596 (15.1).656 (16.7).716 (18.2).776 (19.7).836 (21.2).906 (23.0).976 (24.8)1.036 (26.3)1.096 (27.8)N.125 (3.2).188 (4.8).250 (6.4).312 (7.9).375 (9.5).438 (11.1).500 (12.7).562 (14.3).625 (15.9).688 (17.5).750 (19.1).812 (20.6).875 (22.2).938 (23.8)1.000 (25.4)1.062 (27.0)1.125 (28.6)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)1.875 (47.6)2.000 (50.8)GMax1.635 (41.5)1.695 (43.1)1.765 (44.8)1.795 (45.6)1.895 (48.1)1.955 (49.7)2.015 (51.2)2.075 (52.7)2.135 (54.2)TABLE III: ELBOW DIMENSIONSHMax.836 (21.2).906 (23.0).966 (24.5)1.026 (26.1)1.086 (27.6)1.156 (29.4)1.216 (30.9)1.276 (32.4)1.336 (33.9)JMax1.575 (40.0)1.635 (41.5)1.705 (43.3)1.735 (44.1)1.835 (46.6)1.895 (48.1)1.955 (49.7)2.015 (51.2)2.075 (52.7)TABLE IV: CABLE ENTRYP.250 (6.4).312 (7.9).375 (9.5).438 (11.1).500 (12.7).562 (14.3).625 (15.9).688 (17.5).750 (19.1).812 (20.6).875 (22.2).938 (23.8)1.000 (25.4)1.062 (27.0)1.125 (28.6)1.188 (30.2)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)1.875 (47.6)2.000 (50.8)2.125 (54.0)R.312 (7.9).374 (9.5).437 (11.1).500 (12.7).562 (14.3).624 (15.8).687 (17.4).750 (19.1).812 (20.6).874 (22.2).937 (23.8)1.000 (25.4)1.062 (27.0)1.124 (28.5)1.187 (30.1)1.250 (31.8)1.312 (33.3)1.437 (36.5)1.562 (39.7)1.687 (42.8)1.812 (46.0)1.937 (49.2)2.062 (52.4)2.187 (55.5)* Shrink Boot Supplied with “T” Option(see Part Number Development)KMax.496 (12.6).426 (10.8).426 (10.8).436 (11.1).576 (14.6).796 (20.2).796 (20.2).696 (17.7).696 (17.7)ShrinkBoot*770-003S111770-003S111770-003S112770-003S112770-003S112770-001S104770-001S104770-001S104770-001S104770-001S104770-001S105770-001S105770-001S105770-001S105770-001S106770-001S106770-001S107770-001S107770-001S107770-001S107770-001S108770-001S108770-001S109770-001S109LMax1.915 (48.6)2.075 (52.7)2.075 (52.7)2.145 (54.5)2.195 (55.8)2.225 (56.5)2.225 (56.5)2.375 (60.3)2.375 (60.3)MMax.837 (21.3).887 (22.5).887 (22.5).987 (25.1)1.137 (28.9)1.337 (34.0)1.337 (34.0)1.337 (34.0)1.337 (34.0)Function C MaxWire Bundle.250 (6.4).375 (9.5).375 (9.5).500 (12.7).625 (15.9).625 (15.9).625 (15.9).750 (19.1).750 (19.1)1. When maximum cable entryis exceeded, Style 2 will besupplied (not available inFunction C). DimensionsF, G, H and J will not apply.Please consult factory.2. Metric dimensions (mm) areindicated in parentheses.3. Consult factory for shorterlengths on straightbackshells.4. Backshells supplied with600-052-* band, see GlenairSeries 600 Tool Catalog forinstallation.5. Angular function “C”, lowprofilesplit elbow, notavailable with “S” connectordesignator.GlenairSymbolBMNFTABLE II: FINISHESFinishCadmium Plate, Olive DrabElectroless NickelCadmium Plate, Olive Drabover Electroless NickelNi-PTFE 1000 Hour GreyMTTMNickel Fluorocarbon PolymerConsult Factory for Additional Finish OptionsH© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-19E-Mail: sales@glenair.com

EMI ShieldingAccessories440-075EMI/RFI Banding AdapterSelf-Locking Rotatable Coupling - Standard ProfileProductSeriesConnectorDesignatorBasicNumberShell Size(See Table I)Length (S Only)(1/2 inch incrementse.g. 8 = 4.000 Inches)PolysulfideP - Polysulfide(Omit for None)440 - F S - 075 - NF 16 12 - 8 K PAngle and ProfileH - 45ºJ - 90ºS - StraightFinish(See Table II)Cable Entry(See Table IV)Cable TerminationB - BandK - Precoiled Band(Omit for None)CONNECTOR DESIGNATOR:A - MIL-DTL-5015 / -26482 / -83723F - MIL-DTL-38999 Series I, IIH - MIL-DTL-38999 Series III and IVSELF-LOCKINGROTATABLECOUPLINGSTANDARD PROFILEA Thread(Table I)E Typ.(Table I)Anti-RotationDevice (Typ.)Length** Length ± .060 (1.52)Min. Order Length 1.0 Inch(See Note 3)K**.060 (1.5) Typ..380 (9.7) Typ.L** **(Table IV)1.00 (25.4)MaxF(Table III)H(Table III)G (Table III)STYLE 2(45° & 90°See Note 1) Termination AreaFree of Cadmium.Knurl or RidgesMfr's OptionLength ± .060 (1.52)Min. Order Length 2.0 InchJ (Table III)HBand Option(K Option Shown- See Note 4)Polysulfide StripesP OptionSTYLE 2(STRAIGHTSee Note 1)© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-20E-Mail: sales@glenair.com

440-075EMI/RFI Banding AdapterSelf-Locking Rotatable Coupling - Standard ProfileEMI ShieldingAccessoriesSee Page H-2 for Table I: Backshell Interface DimensionsShell SizeConn. Desig.A-F-L-S H08 0910 1112 1314 1516 1718 1920 2122 2324 25TABLE III: ELBOW DIMENSIONSFMax.795 (20.2).820 (20.8).844 (21.4).861 (21.9).888 (22.6).904 (23.0).929 (23.6).956 (24.3).979 (24.9)GMax.890 (22.6).920 (23.4).940 (23.9).970 (24.6).990 (25.1)1.000 (25.4)1.020 (25.9)1.060 (26.9)1.090 (27.7)HMax.906 (23.0).966 (24.5)1.026 (26.1)1.076 (27.3)1.136 (28.9)1.176 (29.9)1.236 (31.4)1.296 (32.9)1.356 (34.4)JMax1.000 (25.4)1.060 (26.9)1.120 (28.4)1.190 (30.2)1.250 (31.8)1.270 (32.3)1.330 (33.8)1.410 (35.8)1.480 (37.6)TABLE IV: CABLE ENTRYDashNo.020304050607080910111213141516171820222426283032KDia.125 (3.2).188 (4.8).250 (6.4).312 (7.9).375 (9.5).438 (11.1).500 (12.7).562 (14.3).625 (15.9).688 (17.5).750 (19.1).812 (20.6).875 (22.2).938 (23.8)1.000 (25.4)1.062 (27.0)1.125 (28.6)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)1.875 (47.6)2.000 (50.8)LDia.250 (6.4).312 (7.9).375 (9.5).438 (11.1).500 (12.7).562 (14.3).625 (15.9).688 (17.5).750 (19.1).812 (20.6).875 (22.2).938 (23.8)1.000 (25.4)1.062 (27.0)1.125 (28.6)1.188 (30.2)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)1.875 (47.6)2.000 (50.8)2.125 (54.0)GlenairSymbolBMNFTABLE II: FINISHESFinishCadmium Plate, Olive DrabElectroless NickelCadmium Plate, Olive Drabover Electroless NickelNi-PTFE 1000 Hour GreyMTTMNickel Fluorocarbon PolymerConsult Factory for Additional Finish Options1. When maximum cable entry isexceeded, Style 2 will be supplied.Dimensions F, G, H and J will notapply. Please consult factory.2. Metric dimensions (mm) are indicatedin parentheses.3. Consult factory for shorter lengths onstraight backshells.4. Backshells supplied with 600-052-*band, see Glenair Series 600 ToolCatalog for installation.H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-21E-Mail: sales@glenair.com

EMI ShieldingAccessories687-207Composite MIL-C-85049/93Banding Split-Ring.88 (22.4)MaxFor Usewith GlenairBandingBackshells andBraid SocksA.50(12.7)Min.Accomodates600-052 and600-083 BandProductSeriesBasicNumberDash Number(See Table I)687 - 207 XO 16Finish(See Table II)Metric dimensions (mm) are in parenthesesand are for reference only.DashNo.04060810121416182022242628TABLE I: DASH NUMBERA Diameter± .03 (0.8).25 (6.4).38 (9.7).50 (12.7).63 (16.0).75 (19.1).88 (22.4)1.00 (25.4)1.13 (28.7)1.25 (31.8)1.38 (35.1)1.50 (38.1)1.63 (41.4)1.75 (44.5)B Diameter± .03 (0.8).36 (9.1).49 (12.4).61 (15.5).74 (18.8).86 (21.8).99 (25.1)1.10 (27.9)1.24 (31.5)1.36 (34.5)1.49 (37.8)1.61 (40.9)1.74 (44.2)1.86 (47.2)EXAMPLE APPLICATIONShrink Sleeve or Split RingShrink BootTape WrapShield Pig Tailor Drain WireHBand-It BandSolderBand-ItShieldSleeveBandSock© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-22E-Mail: sales@glenair.com

EMI ShieldingAccessories103-026 and -027EMI/RFI Composite Braided Shielding100% Composite and 75% / 25% Blended VersionsProduct SeriesI.D. Dash NumberProduct SeriesI.D. Dash Number103 - 026 - 024100%Composite 1103 - 027 - 02475% / 25%Composite 1 /Metal BlendSpecify Number of Feeton Purchase Order.No Minimums!Wire BundleAccomodationRange (Ref)I.D.®1. Braid is made from Nickel-plated AmberStrand compositethermoplastic fibers. AmberStrand ® is a registered trademarkof Syscom Advanced Materials Inc.103-026 (100% AmberStrand ® Fiber)DashNumberNominal I.D004 .125 (3.2)008 .250 (6.4)012 .375 (9.5)016 .500 (12.7)020 .625 (15.9)024 .750 (19.1)032 1.000 (25.4)040 1.250 (31.8)048 1.500 (38.1)064 2.000 (50.8)Wire BundleRange.093 (2.4).140 (3.5).125 (3.2).312 (7.9).250 (6.4).437 (11.1).250 (6.4).590 (15.0).375 (9.5).700 (17.8).500 (12.7).830 (21.1).780 (19.8)1.100 (27.94).938 (23.8)1.312 (33.3)1.187 (30.1)1.590 (40.37)1.312 (33.3)2.090 (50.8)ApproximateGrams PerFoot1.01.82.33.74.45.28.010.015.222.0103-027 (75% AmberStrand ® Fiber/25% Nickel Copper)DashNumberNominal I.D004 .125 (3.2)008 .250 (6.4)012 .375 (9.5)016 .500 (12.7)020 .625 (15.9)024 .750 (19.1)032 1.000 (25.4)040 1.250 (31.8)048 1.500 (38.1)064 2.000 (50.8)Wire BundleRange.093 (2.4).140 (3.5).125 (3.2).312 (7.9).250 (6.4).437 (11.1).250 (6.4).590 (15.0).375 (9.5).700 (17.8).500 (12.7).830 (21.1).780 (19.8)1.100 (27.94).938 (23.8)1.312 (33.3)1.187 (30.1)1.590 (40.37)1.312 (33.3)2.090 (50.8)Metric dimensions (mm) are indicated in parentheses.ApproximateGrams PerFoot1.52.43.96.06.47.211.015.025.232.0Carrier Breakdown16 - Amberstrand ®4 - Nickel Copper24 - Amberstrand ®8 - Nickel Copper36 - Amberstrand ®12 - Nickel Copper54 - Amberstrand ®18 - Nickel Copper54 - Amberstrand ®18 - Nickel Copper72 - Amberstrand ®24 - Nickel Copper48 - Amberstrand ®16 - Nickel Copper72 - Amberstrand ®24 - Nickel Copper72 - Amberstrand ®24 - Nickel Copper72 - Amberstrand ®24 - Nickel CopperH© 2009 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-6E-Mail: sales@glenair.com

EMI ShieldingAccessories100-001Tubular Metal Braid QQ-B-575B ASTM B33Tin Coated Copperfor EMI Shielding ApplicationsProductSeriesBasicNumberWire GaugeA - 36 AWG (Table I)B - 34 AWG (Table II)Lanyard(Omit for None)100 - 001 - A 203 LDash Number(See Table I or 2)I.D.Lanyard(Synthetic Fiber)Minimum Order Lengthis 100 Feet (30.5M)APPLICATION NOTES1.2.3.Consult factory for sizes not shownMetric dimensions (mm) are indicated in parentheses.Direct current ratings are given for information only. Values shownare for uninsulated braid in free air at 86°F (30°C). Actual valueswill depend on permissible temperature rise, voltage drop and otherconditions of service. Values should be de-rated if the braid isinsulated or in close contact with other components.H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-24E-Mail: sales@glenair.com

100-001Tubular Metal Braid QQ-B-575B ASTM B33Tin Coated Copperfor EMI Shielding ApplicationsEMI ShieldingAccessoriesDashNo.031062078109125156171188203250375500562625781937100012501375150020002500FractionalEquivalentNominalI.D.1/32 .031 (.8)1/16 .062 (1.6)5/64 .078 (2.0)7/64 .109 (2.8)1/8 .125 (3.2)5/32 .156 (4.0)11/64 .171 (4.3)3/16 .188 (4.8)13/64 .203 (5.2)1/4 .250 (6.4)3/8 .375 (9.5)1/29/165/825/3215/1611 1/41 3/81 1/222 1/2.500 (12.7).562 (14.3).625 (15.9).781 (19.8).937 (23.8)1.000 (25.4)1.250 (31.8)1.375 (34.9)1.500 (38.1)2.000 (50.8)2.500 (63.5)No. ofCarriers24242424242424242424484848484864647272729696TABLE I (36 AWG)No. ofEnds2448729612024016819231238438452862472086464076879286493611521248CurrentRating Amps7.011.016.019.025.040.032.033.046.053.053.062.073.085.088.065.090.0Lbs./100 Ft.(Kg/30.5M).20 (.09).40 (.18).60 (.27).83 (.38)1.03 (.47)2.09 (.95)1.43 (.65)1.63 (.74)2.80 (1.27)3.45 (1.56)3.95 (1.79)4.77 (2.16)5.00 (2.27)5.94 (2.69)7.35 (3.33)5.83 (2.64)7.50 (3.40)FederalSpecification No.QQB575R36T031QQB575R36T062QQB575R36T078QQB575R36T109QQB575R36T125QQB575R36T156QQB575R36T171--QQB575R36T203QQB575R36T250QQB575R36T375QQB575R36T500----QQB575R36T781----DashNo.062109125171203375437500781FractionalEquivalent1/167/641/811/6413/643/87/161/225/32NominalI.D..062 (1.6).109 (2.8).125 (3.2).171 (4.3).203 (5.2).375 (9.5).437 (11.1).500 (12.7).781 (19.8)No. ofCarriers161624242448484848TABLE II (34 AWG)No. ofEnds326472120192240288336528CurrentRating Amps11.019.019.036.046.053.044.262.088.0Lbs./100 Ft.(Kg/30.5M).43 (.20).82 (.37).92 (.42)1.56 (.71)2.79 (1.27)3.27 (1.48)3.93 (1.78)4.77 (2.16)7.14 (3.24)FederalSpecification No.QQB575R34T062QQB575R34T109QQB575R34T125QQB575R34T171QQB575R34T203QQB575R34T375--QQB575R34T500QQB575R34T781H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-25E-Mail: sales@glenair.com

EMI ShieldingAccessories100-003Tubular Metal Braid ASTM B355 Class 4 OFHCNickel Plated Copperfor EMI Shielding ApplicationsProductSeriesBasicNumberWire GaugeA - 36 AWG (Table I)B - 34 AWG (Table II)Lanyard(Omit for None)100 - 003 - A 203 LDash Number(See Table I or 2)I.D.Lanyard(Synthetic Fiber)Minimum Order Lengthis 100 Feet (30.5M)APPLICATION NOTES1.2.3.Consult factory for sizes not shownMetric dimensions (mm) are indicated in parentheses.Direct current ratings are given for information only. Values shownare for uninsulated braid in free air at 86°F (30°C). Actual valueswill depend on permissible temperature rise, voltage drop and otherconditions of service. Values should be de-rated if the braid isinsulated or in close contact with other components.H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-26E-Mail: sales@glenair.com

100-003Tubular Metal Braid ASTM B355 Class 4 OFHCNickel Plated Copperfor EMI Shielding ApplicationsEMI ShieldingAccessoriesDashNo.031062078109125156171188203250375500562625781937100012501375150020002500FractionalEquivalent1/321/165/647/641/85/3211/643/1613/641/43/81/29/165/825/3215/1611 1/41 3/81 1/222 1/2NominalI.D..031 (.8).062 (1.6).078 (2.0).109 (2.8).125 (3.2).156 (4.0).171 (4.3).188 (4.8).203 (5.2).250 (6.4).375 (9.5).500 (12.7).562 (14.3).625 (15.9).781 (19.8).937 (23.8)1.000 (25.4)1.250 (31.8)1.375 (34.9)1.500 (38.1)2.000 (50.8)2.500 (63.5)TABLE I (36 AWG)No. ofCarriers24242424242424242424484848484864647272729696No. ofEnds2448729612024016819231238438452862472086464076879286493611521248CurrentRating Amps7.011.016.019.025.040.032.033.046.053.053.062.073.085.088.065.090.0Lbs./100 Ft.(Kg/30.5M).20 (.09).40 (.18).60 (.27).83 (.38)1.03 (.47)2.09 (.95)1.43 (.65)1.63 (.74)2.80 (1.27)3.45 (1.56)3.95 (1.79)4.77 (2.16)5.00 (2.27)5.94 (2.69)7.35 (3.33)5.83 (2.64)7.50 (3.40)DashNo.06210912517120337543750078110001250FractionalEquivalent1/167/641/811/6413/643/87/161/225/3211 1/4TABLE II (34 AWG)Nominal No. of No. ofI.D. Carriers Ends.062.109.125.171.203.375(1.6)(2.8)(3.2)(4.3)(5.2)(9.5)161624242448326472120192240.437 (11.1).500 (12.7).781 (19.8)1.000 (25.4)1.250 (31.8)4848486472288336528576648CurrentRating Amps11.019.019.036.046.053.044.262.088.0150.0Lbs./100 Ft.(Kg/30.5M).43 (.20).82 (.37).92 (.42)1.56 (.71)2.79 (1.27)3.27 (1.48)3.93 (1.78)4.77 (2.16)7.14 (3.24)7.33 (3.33)H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-27E-Mail: sales@glenair.com

EMI ShieldingAccessories249-001Conductive O-Ring forJam Nut Receptacle ConnectorsBasicNumberMaterial Symbol(See Table II)249 - 001 - 09 - HDash Number(See Table I)IDWH© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-28E-Mail: sales@glenair.com

249-001Conductive O-Ring forJam Nut Receptacle ConnectorsEMI ShieldingAccessoriesDashNumberTABLE IO-Ring ID x W-09 .801 x .070-11 .989 x .070-13 1.114 x .070-15 1.239 x .070-17 1.364 x .070-19 1.487 x .103-21 1.612 x .103-23 1.737 x .103-25 1.862 x .103DesignatorBCHTABLE IIMaterialSilver Plated Aluminum in Silicone(CHO-Seal 1285)Silver Plated Aluminum in Flourosilicone(CHO-Seal in 1298 or Equivalent)Silver Plated Copper in Silicone(CHO-Seal 1215 or Equivalent)H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-29E-Mail: sales@glenair.com

EMI ShieldingAccessories249-002Conductive Gasket forFlange Mount Receptacle ConnectorProductSeriesBasicNumberMaterial Symbol(See Table II)249 - 002 - 09 - HDash Number(See Table I)D Dia 4 PlacesCTypATypB Dia E Radius .030 (0.8)HNOTES:1. Identified by bag and tag in suitable quantities.2. Metric dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-30E-Mail: sales@glenair.com

249-002Conductive Gasket forFlange Mount Receptacle ConnectorEMI ShieldingAccessoriesDashNumberA± .005Ø B± .007TABLE IC± .008Ø D± .005E Radius± .015-09 .719 .687 .937 .125 .105-11 .812 .772 1.031 .125 .105-13 .906 .937 1.125 .125 .105-15 .969 1.063 1.250 .125 .135-17 1.062 1.187 1.343 .125 .135-19 1.156 1.312 1.467 .125 .135-21 1.250 1.437 1.652 .125 .135-23 1.375 1.562 1.703 .152 .135-25 1.500 1.600 1.812 .152 .135DesignatorCHTABLE IIMaterialFlourosilicone Binder with Passivated Silver Plated Aluminum Particles(CHO-Seal in 1298 or Equivalent)Silicone Binder with Silver Plated Copper Particles(CHO-Seal 1215 or Equivalent)H© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-31E-Mail: sales@glenair.com

Index of Filter ConnectorProducts and Part NumbersSection A: EMI/EMP Filter Connectors Introduction & Product Selection GuideProduct Selection Guide........................................................................................A-1Practical Solutions for Electromagnetic Compatibility............................................A-2Application Checklist...................................................................................A-3EMC Materials and Technologies...........................................................................A-4EMI/EMP Filter Connector Overview......................................................................A-8Multilayer Ceramic Planar Capacitor Arrays........................................................A-10EMI Filter and Transient Voltage Suppression Packaging.....................................A-11Transient Voltage Suppression Workshop with Serge Gigawatt...........................A-14TVS Diode Selection Guide...................................................................................A-16Insertion Loss and Capacitance Values..............................................................A-18Space-Grade Applications, Soldering and Lightning Strike.................................A-20EMI/EMP Glossary................................................................................................A-21RoHS Compliance & Preference for Domestic Specialty Metals Statement.........A-23Diode Burn-In Services.........................................................................................A-24Section B: Military Standard Type Circular Filter ConnectorsProduct Features...................................................................................................B-1MIL-DTL-38999 Series I Type How To Order........................................................................B-2MIL-DTL-38999 Series I Type Reference Information...........................................B-3240-381W MIL-DTL-38999 Series I Type Wall Mount.............................................B-4240-381R MIL-DTL-38999 Series I Type Crimp Removable Wall Mount...........B-6240-381J MIL-DTL-38999 Series I Type Jam Nut.............................................B-8240-381A MIL-DTL-38999 Series I Connector Adapter......................................B-10MIL-DTL-38999 Series II Type Low-Profile Filter Connector How to Order.....B-12240-382 MIL-DTL-38999 Series II Reference Information..................................B-13240-382W MIL-DTL-38999 Series II Wall Mount................................................B-14240-382J (Hermetic Version Shown) MIL-DTL-38999 Series II Jam Nut...........B-16240-382A MIL-DTL-38999 Series II Connector Adapter.......................................B-18MIL-DTL-38999 Series III Type Filter Connector How to Order ........................B-20MIL-DTL-38999 Series III Type Filter Connector Reference Information.............B-21240-383P MIL-DTL-38999 Series III Plug............................................................B-22240-383W MIL-DTL-38999 Series III Wall Mount.................................................B-24240-383J MIL-DTL-38999 Series III Jam Nut.......................................................B-26240-383S MIL-DTL-38999 Series III Jam Nut Version with Crimp Contacts.......B-28240-383D MIL-DTL-38999 Series III Dual Flange Wall Mount with P.C.Tails.......B-30240-383E MIL-DTL-38999 Series III Dual Flange Jam Nut...........................B-32240-383R MIL-DTL-38999 Series III Wall Mount with Crimp Contacts..............B-34240-383A MIL-DTL-38999 Series III Connector Adapter......................................B-36MIL-DTL-38999 Series IV Type Filter Connector How to Order .......................B-38MIL-DTL-38999 Series IV Type Filter Connector Reference Information.............B-39240-384J MIL-DTL-38999 Series IV Jam Nut Filter Connector..........................B-40240-384W MIL-DTL-38999 Series IV Wall Mount................................................B-42Glenair MIL-DTL-26482 Series II Type Filter Connector How to Order...........B-44Glenair MIL-DTL-26482 Series II Type Filter Connector Reference Information..B-45240-264W MIL-DTL-26482 Series II Wall Mount................................................B-46240-264J MIL-DTL-26482 Series II Jam Nut......................................................B-48240-264A Glenair MIL-DTL-26482 Series II Type Connector Adapter................B-50Glenair MIL-DTL-83723 Series III Type Filter Connector How to Order...............B-52240-837W MIL-DTL-83723/83 Series III Wall Mount Filter Receptacle..............B-54240-837A MIL-DTL-83723 Series III Type Connector Adapter..............................B-56Section C: Glenair Series 80 "Mighty Mouse" Filter ConnectorsProduct Features....................................................................................................C-1Series 80 “Mighty Mouse” Key Positions and Panel Cut-Out Dimensions..............C-2Series 80 “Mighty Mouse” Contact Arrangements.................................................C-3Series 80 “Mighty Mouse” Pin Connectors Printed Circuit Board Layouts..............C-4Series 80 “Mighty Mouse” Socket Connectors Printed Circuit Board Layouts........C-5Glenair Series 801 "Mighty Mouse" How to Order..............................................C-6240-801-01 and -07 Series 801 "Mighty Mouse" Banding Platform Versions.......C-7240-801-02 and -08 Series 801 "Mighty Mouse" Accessory Thread Versions.......C-8Glenair Series 804 "Mighty Mouse" How to Order.............................................C-9240-804-07 and -08 804 Style "Mighty Mouse" Receptacles................................C-10Glenair Series 805 "Mighty Mouse" How to Order..........................................C-12240-805-07 and -08 Series 805 "Mighty Mouse" Jam Nut Receptacles................C-13240-805-01 and -02 Series 805 "Mighty Mouse" Square Flange Receptacles......C-14Section D: Micro-D Subminiature Filter ConnectorsProduct Features....................................................................................................D-1Micro-D Contact Arrangements, Materials and Performance Specifications..........D-2Micro-D Filter Connectors Filter Classes and Performance.................................D-3Micro-D Filter Connectors Recommended Panel Cutouts.....................................D-4MIL-STD-681 Color Code Chart.............................................................................D-5240-030 Micro-D Filter Connectors Solder Cup....................................................D-6240-031 Micro-D Filter Connectors Vertical Mount Printed Circuit Board.............D-8240-031 Micro-D Filter Connectors Vertical Mount PCB Hardware Options.......D-10240-031 Micro-D Filter Vertical Mount PCB Pin Connector Layouts.....................D-11240-032 Micro-D Filter Connectors Pre-Wired Pigtails with Insulated Wire..........D-12240-033 Micro-D Filter Connectors Pin-Socket In-Line Filter Adapters................D-14240-034 Micro-D Filter Connectors Right Angle Printed Circuit Board..................D-16240-034 Micro-D Filter Right Angle PCB Pin Connector Layouts......................D-18240-034 Micro-D Filter Right Angle PCB Socket Connector Layouts...................D-19Section E: MIL-C-24308 Type D-Subminiature Filter ConnectorsProduct Features....................................................................................................E-1240-021 MIL-DTL-24308 Type D-Subminiature Connector....................................E-2247-167 MIL-DTL-24308 Type Right Angle D-Subminiature Connector................E-4Section F: 5015 Type Glenair ITS Series Power and Signal ConnectorsProduct Features....................................................................................................F-1240-ITS-J 5015 Type ITS Series Jam Nut Mount, Reverse Bayonet Coupling...F-2240-ITS-W 5015 Type ITS Series Wall Mount, Reverse Bayonet Coupling.........F-4240-515-J 5015 Type ITS Series Jam Nut Mount Receptacle Connector..............F-6240-515-W 5015, MS3452 ITS SeriesType Wall Mount Receptacle Connector....F-8Section G: Special Purpose and Custom EMI/EMP Filter ConnectorsProduct Features....................................................................................................G-1247-039 D38999 Series 1.5 Filtered Wall Mount Receptacle.................................G-2247-026 D38999 Series III Hybrid Fiber Optic/Electrical Jam Nut Mount...............G-4247-045 Dual Bay Micro-D Filter Connector (90°) PCB Mount..........................G-6247-070 Immersion Proof Micro-D Filter Connector (90°) PCB Mount................G-8240-050 ARINC 600 Class A Size 3 Filter Receptacle.......................................G-10Section H: EMI/EMP Shielding AccessoriesProduct Features....................................................................................................H-1Table I: Backshell Interface Dimensions...................................................................H-2600-058 and 600-061 BAND-IT ® Hand Banding Tools..............................................H-3BAND-IT ® EMI Shield Termination Instructions......................................................H-4600-052, 600-057, 600-090, and 600-083 BAND-IT ® Clamping Bands....................H-5319-064 Composite Swing-Arm Backshell with Nickel/Copper EMI Shield Sock ......H-6319-065 Composite Swing-Arm Backshell with Composite EMI Shield Sock.........H-8319-138 Composite "Wide Mouth" Swing-Arm Backshell w/ EMI Shield Sock........H-10Composite Swing-Arm Assembly Instructions....................................................H-12380-107 EMI Non-Environmental Split Shell Backshell with Strain Relief...........H-14440-069 EMI/RFI Banding Adapter - Full Radius Profile..............................................H-16440-069 EMI/RFI Banding Adapter - Split Shell......................................................H-18440-075 EMI/RFI Banding Adapter - Standard Profile..............................................H-20687-207 Composite MIL-C-85049/93 Banding Split-Ring....................................H-22103-026 and -027 Composite AmberStrand® Tubular Braid for EMI Shielding...........H-23100-001 Tubular Metal Braid Tin Coated Copper.................................................H-24100-003 Tubular Metal Braid Nickel Plated Copper..........................................H-26249-001 Conductive O-Ring for Jam Nut Receptacle Connectors........................H-28249-002 Conductive Gasket for Wall Mount Receptacle Connector.......................H-30Index© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comIndexE-Mail: sales@glenair.com