STYCAST 2762

Properties Of Material As Supplied :Property Test Method Unit ValueChemistryepoxyAppearance Visual blackDensity ASTM-D-792 g/cm 3 2,0 - 2,4Viscosity at 25°C ASTM-D-2393 Pa.s 70 - 110Cure Schedule :Please refer to the instructions for use above.Properties Of Material After Application (with CATALYST 17) :Property Test Method Unit ValueHardness ASTM-D-2240 Shore D 90 minimumCompressive Strength ASTM-D-695 MPa 120Elastic Modulus, Compressive ASTM-D-695 MPa 8200Flexural Strengthat 20°Cat 150°CFlexural Modulusat 20°Cat 150°CEurope North America Asia-PacificNijverheidsstraat 7 46 Manning Road 100 Kaneda, Atsugi-shiB-2260 Westerlo Billerica, MA 01821 Kanagawa-ken, 243Belgium ☎ 800-832-4929 Japan☎ +(32)-(0) 14 57 56 11 ☎ (978) 436-9700 ☎ (81) 462-25-8815Fax: +(32)-(0) 14 58 55 30 Fax: (978) 436-9701 Fax: (81) 462-22-1347The information given and the recommendations made herein are based on our research and are believed to be accurate but no guarantee of their accuracy is made. In every case we urge and recommend thatpurchasers before using any product in full scale production make their own tests to determine to their own satisfaction whether the product is of acceptable quality and is suitable for their particular purposes undertheir own operating conditions. THE PRODUCTS DISCUSSED HEREIN ARE SOLD WITHOUT ANY WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHERWARRANTY, EXPRESSED OR IMPLIED. No representative of ours has any authority to waive or change the foregoing provisions but, subject to such provisions, our engineers are available to assist purchasers inadapting our products to their needs and to the circumstances prevailing in their business. Nothing contained herein shall be construed to imply the non-existence of any relevant patents or to constitute apermission, inducement or recommendation to practice any invention covered by any patent, without the authority from the owner of this patent.© 1997 Emerson & Cuming Specialty Polymers, a division of National Starch & Chemical CompanyASTM-D-790ASTM-D-790MPaMPa70 minimum50 minimumASTM-D-ASTM-D-MPaMPaThermal Conductivity ASTM-D-2214 W/m.K 1,4Coefficient Of Linear Thermal Expansion ASTM-D-3386 10 -6 K -1 20Volume Resistivityat 20°Cat 150°CDielectric Constantat 60 Hzat 10 6 Hzat 10 9 HzDissipation Factorat 60 Hzat 10 6 Hzat 10 9 HzDielectric Strengthat 20°Cat 150°CASTM-D-257ASTM-D-257ASTM-D-150ASTM-D-150ASTM-D-150ASTM-D-150ASTM-D-150ASTM-D-150Ohm.cmOhm.cm8000 minimum5400 minimum10 16 minimum10 11 minimum4,33,93,30,0070,0090,012ASTM-D-149ASTM-D-149kV/mmkV/mm1614,8Moisture Absorption In 24 h ASTM-D-570 % 0,02 maximumMachinabilitymust be groundService Temperature ASTM-D-794 °C -70 to +230

STYCAST 2762Epoxy Encapsulant And SealantFor 260°C UseStorage And Handling :Store STYCAST 2762 in well sealed, unopenedcontainers at temperatures between 18°C and 25°C.Storage Temperature Usable Shelf Life(°C)18 to 25 1 yearHealth & Safety :It is recommended to consult the Emerson & Cumingproduct literature, including material safety datasheets, prior to using Emerson & Cuming products.These may be obtained from your local sales office.Attention Specification Writers :The technical information contained herein isconsistent with the properties of the material andshould not be used in the preparation of specifications,as it is intended for reference only. For assistance inpreparing specifications, please contact your localEmerson & Cuming office for details. Please contactEmerson & Cuming Quality Assurance for test methoddetails.(STYCAST ® is a registered trademark of National Starch and Chemical Company)E13/10/99-MVR/RVH/JG (0138s)Technical Data