www.tesli.com www.tesli.com www.tesli.com
www.tesli.com www.tesli.com www.tesli.com
www.tesli.com www.tesli.com www.tesli.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Melbourne - Australia: Melbourne Arts Centre Photo: McKenzie & Associates pty Itd - Ian McKenzie<br />
design Yamada<br />
532<br />
Kriss<br />
iGuzzini<br />
• Luminaire for lighting effects, for<br />
use with metal halide, sodium<br />
discharge, and halogen lamps.<br />
• Wall-mounted luminaire.<br />
• Luminaire is available in different<br />
sizes and measurements.<br />
• Aluminium optical assembly, with<br />
dual phosphorus-chromium plating<br />
of the base metal, followed by<br />
passivation heat treatment at 120°<br />
C, texturised paint surface finish<br />
and silk-screening, curing at 150° C;<br />
sodium-calcium tempered sealing<br />
glass, 5 mm thick, and tempered<br />
sodium-calcium glass lens, 12,5 mm<br />
thick, transparent. Steel retention<br />
cable. Black rubber silicone gasket.<br />
Curved reflector made of black<br />
anodized aluminium.<br />
Black PG9 cable clamp.<br />
WALL-MOUNTED LUMINAIRES FOR LUMINOUS EFFECTS<br />
• Aluminium posterior control<br />
gear cover, with a texturised<br />
paint surface finish; power supply<br />
with a non-explosive power factor<br />
correction capacitor,<br />
ballast and starter.<br />
• All screws are A2 stainless steel.<br />
• The light flux is available in different<br />
distributions: a focused beam<br />
obtained through a biconvex lens, or<br />
a wide beam with different opening<br />
angles obtained through a protective<br />
glass, or light beam control with the<br />
use of special screws, or light wedge<br />
projected with limited soft edges.<br />
• The technical characteristics of the<br />
fitting <strong>com</strong>ply with EN60598-1<br />
standard.<br />
• IP44 IK05<br />
• ENEC approval<br />
• Class of Insulation I
Change language