LEADTEK Wireless GPS Receiver User's Manual

More documents

Recommendations

Info

.3.5. GPSNavigatingThe left LED(LED 2) will flash GREEN (or ORANGE when charging) if thereceiver is able to determine the current position.3.6. PIN CODEThe PIN code means Personal Identification Number for Bluetooth device and it is alsocalled as Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is “0000”. Generallyspeaking, there are two steps in Bluetooth connecting. One is pairing process, the other is link process.If you need PIN code to pairing and connect, you can use the default pin code, “0000” to connectBluetooth device. Our GPS receiver belongs to non-safety connecting, you can use in generalapplication to finish connecting.4. Notices4.1. Global Positioning SystemThe Global Positioning System (GPS) is operated and maintained by the Government ofthe United States of America who are responsible for the availability and the accuracy of the system.Changes in the operation, availability and accuracy may affect the operation of your GPS receiver.4.2. Aircraft and HospitalsUse of devices with an antenna is prohibited on most aircraft and in many hospitals. TheTomTom Wireless GPS receiver is a receiving and transmitting device with two antenna’s and shouldnot be used in these environments.4.3. Heat Reflective ShieldsModern vehicles may have a heat reflective shield in the windshield, preventing properGPS signal reception if the receiver is placed under the windshield. To get proper reception:(a) Use an external antenna, or(b) Place the receiver in a different position, or(c) Attach the cradle to the windshield behind the rearview mirror, where many vehicles have anopening in the heat reflective shield, indicated by a black outline.4.4. ImportantThe information in this document is subject to change without notice. No liability shall beassumed for technical or editorial errors or omissions contained herein; nor for incidental orconsequential damages resulting from the performance or use of this material. This documentcontains information protected by copyright.- 6 -
.5.5 BatteryThis product uses a Lithium-Ion battery. Please charge fully before first use. Operation in low (below 0ºC/32ºF or high (over 40ºC/110ºF) temperatures will affect power supply efficiency and the ability tocharge the battery. All Lithium-Ion batteries will experience power supply efficiency deterioration overtime even if not used and have a limited life expectancy. Permanently powering the battery will reducelife expectancy. Do not use your product in a humid, wet and/or corrosive environment. Do not put,store or leave your product in or near a heat source or in a high temperature location and do not exposeit to temperature over 60ºC(140ºF). Failure to follow these guidelines may cause the Lithium-Ionbattery to become hot, explode or ignite and cause injury and/or damage. THE LITHIUM-IONBATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OFPROPERLY. USE ONLY WITH SUPPLIED CHARGER(s) AND SUPPLIED AC ADAPTOR FORBATTERY CHARGING.5.6 FCCThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.--Consult the dealer or an experienced radio/TV technician for help.CAUTIONAny changes or modifications not expressly approved by the grantee of this device could void the user’sauthority to operate the equipment.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with a minimum distance of 20cmbetween the radiator and your body.- 7 -
Page 1 and 2: .LEADTEK Wireless GPS ReceiverUser
Page 3 and 4: .1. Introduction1.1. OverviewThe Le
Page 5 and 6: .Output messageDefault output forma
Page 7: .LED2GPS & Charge LEDDescriptionLED
Page 11 and 12: .2. BTWCE 1.1(1) Make sure that the
Page 13 and 14: .(5) Back to the main form of BTW-C
Page 15 and 16: .(7) As the connection being establ
Page 17 and 18: .(3) Click the “Bluetooth Manager
Page 19 and 20: .(7) Select the target and hold on
Page 21 and 22: .Step 2.The Add/Remove Programs dia
Page 23 and 24: .Step 5.When the installation is co
Page 25 and 26: .you have to get the authorized sof
Page 27 and 28: . In the Folders pane of My Bluetoo
Page 29: .Leadtek Research Inc.: 18F, 166, C

LEADTEK Wireless GPS Receiver User's Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?