DeltaSol BS Plus - Ika

More documents

Recommendations

Info

DeltaSol ® BS Plus2. Opeartion and function2.1 Pushbuttons for adjustmentThe controller is operated by 3 pushbuttons below thedisplay. The forward-key (1) is used for scrolling forwardthrough the indication menu or to increase the adjustmentvalues. The backwards-key (2) is accordingly used for thereverse function.backwardforward231For adjustment of last indication channel, keep button 1pressed for 3 seconds. If an adjustment value is shown onthe display, SET is indicated. In this case you can press thekey „Set“ (3) in order to change into input mode.SET(selection / adjustment mode)Select a channel by keys 1 and 2Shortly press key 3, so that SET is blinking.Adjust the value by keys 1 and 2Shortly press key 3, so that SET permanently appears,the adjusted value is now saved.2.2 System monitoring displayThe system monitoring display consists of 3 blocks: indication of the channel, tool bar and system screen(active system scheme).Full Monitoring-Display2.2.1 Channel indication2.2.2 Tool barindication channel onlyThe indication channel consists of two lines. The upperline is an alphanumeric 16-segment indication in which mainlythe channel names / menu items are shown. In the lower7-segment indication, the channel values and the adjustmentparameter are indicated.Temperatures and temperature differences are indicatedin or .The additional symbols of the tool bar indicate the currentsystem status.tool bar onlySymbol normal blinkendrelay 1 activerelay 2 activemaximum store limitationactive / maximum storetemperature exceededoption antifreeze functionactive+ sensor defectcollector cooling function activerecooling function activecollector minimum limitationactive antifreeze functionactivecollector security shutdownactive or store securtiy shutdownactive+ manual operation activeSET-mode© NEHS_07333_deltasol_bs_plus.mon.indd| 10
DeltaSol ® BS Plus2.2.3 System screenSystem Screen onlyThe system screen (active system scheme) shows theschemes selected on the controller. It consists of severalsystem component symbols, which are - depending on thecurrent status of the system - either flashing, permanentlyshown or hidden.Sensorsupper sensor storeCollector 2Heating circuitCollector 1ValvePumpsValveSensorAdditional symbol foroperation of the burnerStore heat-exchangerStoreStore 2 or afterheating (withan additional symbol)Collectorswith collector sensorStores 1 and 2 with heatexchangerThe flow direction or thecurrent breaking capacityis always shown.Temperature sensor PumpAfterheatingwith burner symbol© NEHS_07333_deltasol_bs_plus.mon.indd 2.3.1 System screen blinking codes2.3.2 LED blinking codes Pumps are blinking during starting phase Sensors are blinking if the respective sensor-indicationchannel is selected. Sensors are quickly blinking in case of sensor defect. Burner symbol is blinking if after-heating is activatedConstantly green: everything all rightRed/green blinking: initialisation phasemanual operationRed blinking: sensor defect(sensor symbol is quickly blinking)11 |
Page 1 and 2: *48000500*48000500DeltaSol ® BS Pl
Page 3 and 4: DeltaSol ® BS Plus Pt1000
Page 5 and 6: DeltaSol ® BS Plus The controll
Page 7 and 8: DeltaSol ® BS Plus1.2.5 Allocation
Page 9: DeltaSol ® BS Plus1.2.8 Connection
Page 13 and 14: DeltaSol ® BS Plus4. Control param
Page 15 and 16: DeltaSol ® BS Plus4.1.1 Indicataio
Page 17 and 18: DeltaSol ® BS Plus4.1.8 DT E / DT1
Page 20 and 21: DeltaSol ® BS Plus4.1.18 Thermosta
Page 22 and 23: DeltaSol ® BS Plus5.1 VariousPump
Page 24: DeltaSol ® BS Plus6. AccessorySens

DeltaSol BS Plus - Ika

Create successful ePaper yourself

Delete template?

Save as template?