01. SPARE PARTS Ph: 1800 935 378 - Weld-Quip

01. SPARE PARTSCONTENTS01. MIG Torch Spares............................................ 2-30• Nozzle Quick Reference .............................. 2-3• Binzel MIG Torch Parts................................ 4-8MB 15, 24, 25, 26, 36 MIG Torch• TWECO TW1 MIG Torch.............................. 9-17TWECO TW1, TW2, 1, 2, 4, 5 MIG Torchs,Tweco Parts, ESAB Guns & Parts• FRONIUS MIG Torch Parts........................... 18-19• KEMPPI MIG Compatible MIGConsumables.............................................. 20-21• CIGWELD MIG Torch Spares....................... 22• BERNARD MIG Torch Spares..................... 23-30MIG Torch Guns, Q200, Q300, Q400 MIG Torch,Elliptical, Front End Parts, Cetrefire Front End Parts,MIG Gun Consumables02. TIG Torch Spares............................................. 31-3403. Plasma Torch Spares....................................... 35-5404. Spot Welding Tip Spares.................................. 55-6905. Gouging Torch Spares..................................... 7006. ROLA-CASE Draw Systems............................ 71Ph: 1800 935 378

MB 24 KD Gas Cooled MIG/MAG Welding TorchPos. DescriptionPart No.30 for wire ø 0.6-0.9for 3.00m 127.0002for 4.00m 127.0003for 5.00m 127.0004Carbon Teflon liner 2.0/4.0with collet ring and o-ringfor wire ø 1.0-1.2for 3.00m 127.0005for 4.00m 127.0007for 5.00m 127.000831 Collet for liner at ø 4.0 131.000132 O-ring 3.5x1.5 165.000833 Guide tube for liners up to ø 4.0 129xxxx34 Spanner 191.0001BINZELPos. DescriptionPart No.1 Swan neck MB 24 KD, 50º bent 012.00012 Swan neck AUT 24 KD, straight 912.00013 Swan neck AUT 24 KD, 45º bent 912.00024 Ergonomic handle, cpl., with trigger 180.0076Handle (New Blue),cpl., with trigger 180.0039Trigger (New Blue Handle) 185.00055 Trigger 2 pol. 185.00316 Handle tube AUT 180.00017 Bicox power cable (35) 3.00m 160.0239Bicox power cable (35) 4.00m 160.0255Bicox power cable (35) 5.00m 160.02678 Hexagon nut M10x1 001.00099 Trigger wire connector 175.002210 Insulating sleeve 400.011911 Trigger wire connector male 175.000412 Cable support spring NW 19 500.022513 Cable support machine side 501.224814 Screw M4x6 000.055215 Adaptor nut 500.021316 Central adaptor block KZ-2 501.000317 Liner Retaining Nut 501.008218 O-ring 4x1 165.000219 Trigger wire connector female 175.000320 Gas diffuser 012.018321 Contact Tip Holder 142.000322 Contact tip M6 E-Cu, ø 0.8 140.0051Contact tip M6 E-Cu, ø 0.9 140.0169Contact tip M6 E-Cu, ø 1.0 140.0242Contact tip M6 E-Cu, ø 1.2 140.0379Contact tip M6 CuCrZr, ø 0.8 140.0054Contact tip M6 CuCrZr, ø 0.9 140.0172Contact tip M6 CuCrZr, ø 1.0 140.0245Contact tip M6 CuCrZr, ø 1.2 140.0382Contact tip M6 E-Cu, ø 0.8 141.0001for Al wireContact tip M6 E-Cu, ø 0.9 141.000for Al wireContact tip M6 E-Cu, ø 1.0 141.0006for Al wireContact tip M6 E-Cu, ø 1.2 141.0072for Al wire23 Gas nozzle, cylindrical ø 17.0 145.004724 Gas nozzle, cyl. H. Duty ø 17.0 145.006225 Gas nozzle, conical ø 12.5 145.008026 Gas nozzle, con. H. Duty ø 12.5 145.010127 Gas nozzle, tapered ø 10.0 145.012828 Spot weld, gas nozzle ø 17.0 145.017429 Insulated 1iner 1.5/4.5 bluewith nipple for wire ø 0.6-0.9for 3.00m 124.0011for 4.00m 124.0031for 5.00m 124.0015insulated liner 2.0/4.5 redwith nipple or wire ø 1.0-1.2for 3.00m 124.0026for 4.00m 124.0012for 5.00m 124.003530 Teflon liner 1.5/4.0 bluewith collet and o-ringfor wire ø 0.6-0.9for 3.00m 126.0005for 4.00m 126.0008for 5.00m 126.0011Teflon liner 2.0/4.0 redwith collet ring and o-ringfor wire ø 1.0-1.2for 3.00m 126.0021for 4.00m 126.0026for 5.00m 126.0028Carbon Teflon liner 1.5/4.0with collet ring and 0-ringMIG TORCH SPARES

MIG TORCH SPARESBINZELPos. DescriptionPart No.1 Swan neck MB 25 AK, 50º bent 004.00122 Swan neck AUT 25 AK, straight 904.00033 Swan neck AUT 25 AK, 45º bent 904.00044 Nozzle Spring 003.00135 Torch body, brass 400.01146 Torch body, plastic 400.00447 Ergonomic handle, cpl., with trigger 180.0076Handle (New Blue),cpl., with trigger 180.0039Trigger (New Blue Handle) 185.00058 Trigger pol. 185.00319 Handle tube AUT 180.000110 Bicox power cable (25) 3.00m 160.0128Bicox power cable (25) 4.00m 160.0142Bicox power cable (25) 5.00m 160.015511 Hexagon nut M10x1 001.000912 Trigger wire connector 175.002213 Insulating sleeve 400.011914 Trigger wire connector male 175.000415 Cable support spring NW 19 500.022516 Cable support machine side 501.224817 Screw M4 x6 000.055218 Adaptor nut 500.021319 Central adaptor block KZ-2 501.000320 Liner Retaining Nut 501.008221 O-ring 4x1 165.000222 Trigger wire connector female 175.000323 Contact Tip Holder M6, 35.0mm 142.000124 Contact tip M6 E-Cu, ø 0.8 140.0051Contact tip M6 E-Cu, ø 0.9 140.0169Contact tip M6 E-Cu, ø 1.0 140.0242Contact tip M6 E-Cu, ø 1.2 140.0379Contact tip M6 CuCrZr, ø 0.8 140.0054Contact tip M6 CuCrZr, ø 0.9 140.0172Contact tip M6 CuCrZr, ø 1.0 140.0245Contact tip M6 CuCrZr, ø 1.2 140.0382Contact tip M6 E-Cu, ø 0.8 141.0001for Al wireContact tip M6 E-Cu, ø 0.9 141.0004for Al wireContact tip M6 E-Cu, ø 1.0 141.0006for Al wireContact tip M6 E-Cu, ø 1.2 141.0072for Al wire25 Gas nozzle, cylindrical ø 18.0 145.004226 Gas nozzle, conical. ø 15.0 145.007627 Gas nozzle, con. ext. ins. ø 15.0 145.010028 Gas nozzle, tapered ø 11.5 145.012429 Spot weld, gas nozzle ø 18.0 145.016930 Insulated liner 1.5/4.5 bluewith nipple for wire ø 0.6-0.9for 3.00m 124.0011for 4.00m 124.0012for 5.00m 124.0015insulated liner 2.0/4.5 redwith nipple or wire ø 1.0-1/2for 3.00m 124.0026for 4.00m 124.0031for 5.00m 124.003531 Teflon liner 1.5/4.0 bluewith collet & o-ringfor wire ø 0.6-0.9for 3.00m 126.0005for 4.00m 126.0008for 5.00m 126.0011Teflon liner 2.0/4.0 redwith collet and o-ringfor wire ø 1.0-1.2for 3.00m 126.0021for 4.00m 126.0026for 5.00m 126.0028MB 25 AK Gas Cooled MIG/MAG Welding TorchPos. DescriptionPart No.Carbon Teflon liner 1.5/4.0with collet ring and o-ringfor wire ø 0.6-0.9for 3.00m 127.0002for 4.00m 127.0003for 5.00m 127.0004Carbon Teflon liner 2.0/4.0with collet ring and o-ringfor wire ø 1.0-1.2for 3.00m 127.0005for 4.00m 127.0007for 5.00m 127.0008Pos. DescriptionPart No.32 Collet for liner at ø 4.0 131.000133 O-ring 3.5 x 1.5 165.000834 Guide tube for liners up to ø 4.0 129xxxx35 Spanner 191.0001 SPARE PARTS CALL 1800 935 378 TO ORDER

TWECOTorch Part BreakdownITEM DESCRIPTION PART No1 Nozzle 13mm OTW21/50/F1 Nozzle 16mm OTW21/62/F2 Contact tip Refer Page 123 Diffuser OTW514 Conductor tube 45º T1161035055 Handle repair kit 7175906 Euro back end kit 7175917 Conduit liner 0.6-0.9 7175247 Conduit liner 1.2 717543TWECO TW1Torch Part BreakdownITEM DESCRIPTIONPART No1 Nozzle Refer Page 122 Insulator OTW323 Contact tip Refer Page 124 Diffuser OTW525 Conductor tube 45º screw tips T1161035065 Conductor tube 45º elim tips T1161035086 Handle repair kit 7175927 Euro back end kit 7175918 Conduit liner9 Tweco® back end kit 717593TWECO TW2MIG TORCH SPARES

TWECOTorch Part BreakdownITEM DESCRIPTION PART No1 Nozzle Refer Page 122 Insulator OTW34A3 Contact tip Refer Page 124 Diffuser OTW54A5 Conductor tube 45º T1161035076 Handle repair kit 7175927 Euro back end kit 7175918 Conduit liner9 Tweco® back end kit 71759310 Insulator CT 717540TWECO 4Torch Part BreakdownITEM DESCRIPTION PART No1 Nozzle Refer Page 122 Contact tip Refer Page 123 Diffuser Refer Page 114 Insulator 7175415 Conductor tube 45º OTW65/455 Conductor tube 60º OTW65/605 Conductor tube45º OTW65J/455 Conductor tube 60º OTW65J/606 Power connector OTW1047 Handle OTW858 Trigger assembly OTW94R9 Gun hanger OTW15410 Front cable support OTW145/1211 Front cable clamp OTW134/1412 Rear case OTWM6RC13 Rear cable clamp OTW134/1414 Conduit liner15 Connector plug 1/2” OTW176S15 Connector plug 5/8” OTW176SH16 Grub screw 8/32UNC OTW44C17 O-ring OTW22518 Power cable adaptor OTWM170/519 Rear power connector OTW10420 Rear support OTW350R23010TWECO 5MIG TORCH SPARES11

TWECOCONTACT TIPSTWECO 1 - SERIES Description Part NoContact Tip 0.6mm 11-23Contact Tip 0.8mm 11-30Contact Tip 0.9mm 11-35Contact Tip 1.0mm 11-40Contact Tip 1.2mm 11-45TWECO 4 - SERIES Description Part NoMIG TORCH SPARESContact Tip 0.6mm 14-23Contact Tip 0.8mm 14-30Contact Tip 0.9mm 14-35Contact Tip 1.0mm 14-40Contact Tip 1.2mm 14-45Contact Tip 1.6mm 14-116Heavy Duty Contact Tip 0.9mm 14H-35Heavy Duty Contact Tip 1.0mm 14H-40Heavy Duty Contact Tip 1.2mm 14H-45Heavy Duty Contact Tip 1.6mm 14H-11Heavy Duty Contact Tip 1.6mm14H-116/78Heavy Duty Contact Tip 2.0mm 14H-56Heavy Duty Contact Tip 1.2mm ALUM 14AH-45Heavy Duty Contact Tip 1.6mm ALUM 14AH-116Contact Tip 0.8mm Tapered 14T-30Contact Tip 0.9mm Tapered 14T-35Contact Tip 1.2mm Tapered 14T-45TWECO 5 - SERIES Description Part NoHeavy Duty Contact Tip 0.9mm 15H-35Heavy Duty Contact Tip 1.2mm 15H-45Heavy Duty Contact Tip 1.6mm 15H-116Heavy Duty Contact Tip 2.0mm 15H-564Heavy Duty Contact Tip 2.4mm 15H-332Heavy Duty Contact Tip 2.8mm 15H-764Heavy Duty Contact Tip 1.2mm ALUM 15AH-364Heavy Duty Contact Tip 1.6mm F/COR 15HFC-116Heavy Duty Contact Tip 1.2mm F/COR 15AHFC-364Heavy Duty Contact Tip 1.6mm F/COR 15AHFC-116Heavy Duty Contact Tip 2.0mm F/COR 15HFC-564TIP HOLDERS/GAS DIFFUSERS Description Part No Applicable TorchesGas Diffuser MIG 135 23005146 MIG135 gun & Portaweld 100 gunGas Diffuser Mini Gun 717522 Mini GunGas Diffuser 51 – 51/R Tweco® No.1;MIG 165 Gun ; MIG 190 GunGas Diffuser 52 – 52/R Tweco® No.2; TWE No.2Gas Diffuser 54A – 54A/R Tweco® No.4; TWE No.4Gas Diffuser 0.9 -1.6mm Conduits 555W Tweco® No.5; Super XTGas Diffuser 0.9 -2.0mm Conduits 55 Tweco® No.5; Super XTGas Diffuser 2.4-2.8mm Conduits 55H Tweco® No.5; Super XTEliminator® 250 amp Gas Diffuser EL52 – EL52/R Eliminator® 250Adjustable Nozzle.12 SPARE PARTS CALL 1800 935 378 TO ORDER

TWECOELIMINATORS Description Part NoContact Tip 0.6mm TaperedContact Tip 0.8mm TaperedContact Tip 0.9mm TaperedContact Tip 1.0mm TaperedContact Tip 1.2mm TaperedContact Tip 1.6mm TaperedContact Tip 1.2mm ALUMContact Tip 1.6mm ALUMContact Tip 0.8mmContact Tip 0.9mmContact Tip 1.0mmContact Tip 1.2mmContact Tip 1.3mmContact Tip 1.6mmContact Tip 2.0mmContact Tip 2.4mmEL16T23EL16T30EL16T35EL16T40EL16T45EL16T116EL16A364EL16A116EL1630EL1635EL1640EL1645EL1652EL16116EL16564EL16332NOZZLESSTANDARD SERIES Description Part NoNozzle Tramsmig 130 TwinOCE1311Nozzle Tweco® 1 Fixed 13mm Flush Tip21-50-FNozzle Tweco® 1 Fixed 16mm Flush Tip21-62-FTweco® 2 Adjustable 13mm 3mm Recess Tip 22-50Tweco® 2 Adjustable 16mm 3mm Recess Tip 22-62Tweco® No 4 Fixed 16mm Flush Tip23-62-FTweco® No 4 Short Stop Tapered 3mm Recess Tip24AT-37-SSTweco® No 4 Adjustable 13mm 24A-50Tweco® No 4 Adjustable 16mm 24A-62Tweco® No 4 Adjustable Heavy Duty 16mm24AH-62Tweco® No 4 Adjustable Heavy Duty 19mm24AH-75Tweco® No 4 CT Nozzle Tip 16mm Fixed 3mm Recess Tip 24CT-62-STweco® No 4 CT Nozzle Tip 16mm Fixed 13mm Recess Tip 24CT-62-RTweco® No 5 CT Nozzle Tip 16mm Fixed 3mm Recess Tip 25CT-62Tweco® No 5 CT Nozzle Tip 19mm Fixed 3mm Recess Tip 25CT-75Eliminator Description Part NoNozzle Eliminator® 250 amp Adjustable 10mmNozzle Eliminator® 250 amp Adjustable 13mmNozzle Eliminator® 250 amp Adjustable 13mm FlushNozzle Eliminator® 250 amp Adjustable 16mmNozzle Eliminator® 250 amp Adjustable 16mm FlushNozzle Eliminator® 250 amp Adjustable 19mmNozzle Eliminator® 250 amp Adjustable 13mmProtruded tipNozzle Eliminator® 250 amp Adjustable 16mm Protruded tipNozzle Eliminator® 250 amp Fixed 16mm 3mm Recess tipINSULATORSTweco® No.2 and No.4 Description Part NoAdjustable Tweco® No.2 32Adjustable Tweco® No.434ATweco® No.4 & 5 Description Part NoFixed Insulator for CT Nozzle Tweco® No.4Fixed Insulator for CT Nozzle Tweco® No.534CT35CTEL22A37EL22A50EL22A50FEL22A62EL22A62FEL22A75EL22150PEL22162PEL22CT6213MIG TORCH SPARES

ESABPSF 160 Mig Welding Torch Air CooledRating 160 Amps @ 60% Duty Cycle Mixed Gases - Wire Size 0.6mm to 1.0mmMIG TORCH SPARESTorch PackagesNo. LENGTH FITTING SWITCHINGES160-3E 3mt Euro MicroswitchES160-4E 4mt Euro MicroswitchES160-3 3mt A10 MicroswitchES160-4 4mt A10 MicroswitchMain ConsumablesNo. PART NO DESCRIPTION PACK QTY1 366-324-880 Swan Neck PSF160 12 469-249-001 Tip Adaptor 53 192-086-006 Neck Insulation Sleeve 14 366-397-001 Insulation - Diffuser 55 366-396-001 Nozzle Insulator 56 366-854-880 Nozzle 13mm Bore c/w Insulator 5366-946-880 Nozzle 11mm Bore c/w Insulator 57 366-974-880 Locking Nut 1Contact Tips (ECU)No. SIZE WIRE SIZE8 153-500-001 M6x30mm 0.6mm 10153-500-002 M6x30mm 0.8mm 10153-500-003 M6x30mm 0.9mm 10153-500-004 M6x30mm 1.0mm 10Contact Tips (CuCrZr)468-500-001 M6x27mm 0.6mm 10468-500-003 M6x27mm 0.8mm 10468-500-004 M6x27mm 0.9mm 10468-500-005 M6x27mm 1.0mm 10Liners (Steel & PTFE)No. PART No DESCRIPTION PACK QTY9 366-549-882 Steel 0.6-0.8mm x 3mt 1366-549-883 Steel 0.6-0.8mm x 4.5mt 1366-549-884 Steel 0.9-1.0mm x 3mt 1366-549-885 Steel 0.9-1.0mm x 4.5mt 1366-550-882 PTFE 0.8mm x 3mt 1366-550-883 PTFE 0.8mm x 4.5mt 1366-550-884 PTFE 0.9-1.0mm x 3mt 1366-550-885 PTFE 0.9-1.0mm x 4.5mt 1366-550-886 PTFE 1.2mm x 3mt 1366-550-887 PTFE 1.2mm x 4.5mt 1Liners (Steel & PTFE)ALL STEEL & PTFE LINERS ARE SUPPLIED WITH FITTINGS FOR A10 CONNECTION.EURO LINER NIPPLE IS ENCLOSED IN PACKAGINGSecondary ConsumablesNo. PART No DESCRIPTION PACK QTY10 156-436-002 Handle Complete 111 366-980-880 Microswitch 112 ES 1603 Cable Assy 3mt 1ES1604 Cable Assy 4mt 113 ES8000 Complete Euro Connection Kit 1C/w Support14 ES8002 Complete A10 Connection Kit1 1C/w Support14 SPARE PARTS CALL 1800 935 378 TO ORDER

ESABPSF 250 Mig Welding Torch Air CooledRating 225 Amps @ 60% Duty Cycle Mixed Gases - Wire Size 0.6mm to 1.0mmTorch PackagesNo. LENGTH FITTING SWITCHINGES250-3E 3mt Euro MicroswitchES250-4E 4mt Euro MicroswitchES250-3 3mt A10 MicroswitchES250-4 4mt A10 MicroswitchMain ConsumablesNo. PART NO DESCRIPTION PACK QTY1 366-315-880 Swan Neck PSF250 12 336-314-001 Tip Adaptor 53 192-086-006 Neck Insulation Sleeve 14 366-397-001 Insulation - Diffuser 55 366-396-002 Nozzle Insulator 56 366-854-881 Nozzle 14mm Bore c/w Insulator 5366-946-881 Nozzle 12mm Bore c/w Insulator 57 366-974-880 Locking Nut 1Liners (Steel & PTFE)No. PART No DESCRIPTION PACK QTY9 366-549-882 Steel 0.6-0.8mm x 3mt 1366-549-883 Steel 0.6-0.8mm x 4.5mt 1366-549-884 Steel 0.9-1.0mm x 3mt 1366-549-885 Steel 0.9-1.0mm x 4.5mt 1366-550-882 PTFE 0.8mm x 3mt 1366-550-883 PTFE 0.8mm x 4.5mt 1366-550-884 PTFE 0.9-1.0mm x 3mt 1366-550-885 PTFE 0.9-1.0mm x 4.5mt 1366-550-886 PTFE 1.2mm x 3mt 1366-550-887 PTFE 1.2mm x 4.5mt 1Liners (Steel & PTFE)ALL STEEL & PTFE LINERS ARE SUPPLIED WITH FITTINGS FOR A10 CONNECTION.EURO LINER NIPPLE IS ENCLOSED IN PACKAGINGMIG TORCH SPARESContact Tips (ECU)SIZEWIRE SIZE8 153-500-001 M6x30mm 0.6mm 10153-500-002 M6x30mm 0.8mm 10153-500-003 M6x30mm 0.9mm 10153-500-004 M6x30mm 1.0mm 10153-500-005 M6x30mm 1.2mm 10Contact Tips (CuCrZr)468-500-001 M6x27mm 0.6mm 10468-500-003 M6x27mm 0.8mm 10468-500-004 M6x27mm 0.9mm 10468-500-005 M6x27mm 1.0mm 10468-500-007 M6x27mm 1.2mm 10Secondary ConsumablesNo. PART No DESCRIPTION PACK QTY10 156-436-002 Handle Complete 111 366-980-880 Microswitch 112 ES 2503 Cable Assy 3mt 1ES2504 Cable Assy 4mt 113 ES8000 Complete Euro Connection Kit 1C/w Support14 ES8002 Complete A10 Connection Kit1 1C/w Support15

ESABPSF 315 Mig Welding Torch Air CooledRating 285 Amps @ 60% Duty Cycle Mixed Gases - Wire Size 0.6mm to 1.2mmMIG TORCH SPARESTorch PackagesNo. LENGTH FITTING SWITCHINGES315-3E 3mt Euro MicroswitchES315-4E 4mt Euro MicroswitchES315-3 3mt A10 MicroswitchES315-4 4mt A10 MicroswitchMain ConsumablesNo. PART NO DESCRIPTION PACK QTY1 366-388-880 Swan Neck PSF315 12 366-394-001 Tip Adaptor 53 192-086-001 Neck Insulation Sleeve 14 366-397-002 Insulation - Diffuser 55 366-396-003 Nozzle Insulator 56 366-854-882 Nozzle 16mm Bore c/w Insulator 5366-946-882 Nozzle 13mm Bore c/w Insulator 57 156-614-001 Locking Nut 1Contact Tips (ECU)SIZEWIRE SIZE8 153-500-001 M6x30mm 0.6mm 10153-500-002 M6x30mm 0.8mm 10153-500-003 M6x30mm 0.9mm 10153-500-004 M6x30mm 1.0mm 10153-500-005 M6x30mm 1.2mm 10153-500-006 M6x30mm 1.4mm 10Contact Tips (CuCrZr)468-500-001 M6x27mm 0.6mm 10468-500-003 M6x27mm 0.8mm 10468-500-004 M6x27mm 0.9mm 10468-500-005 M6x27mm 1.0mm 10468-500-007 M6x27mm 1.2mm 10468-500-008 M6x27mm 1.4mm 10Liners (Steel & PTFE)No. PART No DESCRIPTION PACK QTY9 366-549-882 Steel 0.6-0.8mm x 3mt 1366-549-883 Steel 0.6-0.8mm x 4.5mt 1366-549-884 Steel 0.9-1.0mm x 3mt 1366-549-885 Steel 0.9-1.0mm x 4.5mt 1366-549-886 Steel 1.2mm x 3mt 1366-549-887 Steel 1.2mm x 4.5mt 1366-549-888 Steel 1.4mm x 3mt 1366-549-889 Steel 1.4mm x 4.5mt 1366-550-882 PTFE 0.8mm x 3mt 1366-550-883 PTFE 0.8mm x 4.5mt 1366-550-884 PTFE 0.9-1.0mm x 3mt 1366-550-885 PTFE 0.9-1.0mm x 4.5mt 1366-550-886 PTFE 1.2mm x 3mt 1366-550-887 PTFE 1.2mm x 4.5mt 1366-550-890 PTFE 1.6mm x 3mt 1366-550-891 PTFE 1.6mm x 4.5mt 1Liners (Steel & PTFE)ALL STEEL & PTFE LINERS ARE SUPPLIED WITH FITTINGS FOR A10 CONNECTION.EURO LINER NIPPLE IS ENCLOSED IN PACKAGINGSecondary ConsumablesNo. PART No DESCRIPTION PACK QTY10 366-853-880 Handle Complete 111 366-840-880 Trigger Comp 111a 341-934-880 Microswitch 112 ES3153 Cable Assy 3mt 1ES3154 Cable Assy 4mt 113 ES8000 Complete Euro Connection Kit 1C/w Support14 ES8002 Complete A10 Connection Kit 1C/w Support16 SPARE PARTS CALL 1800 935 378 TO ORDER

ESABCompatible Esab PSF 400 & 500 Mig ConsumablesSwan NecksNo. PART No DESCRIPTION PACK QTY1 366-389-880 PSF400 1366-390-880 PSF500 1Gas Nozzles & Nozzle Insulator2 366-854-883 PSF400 - 17mm Bore 5366-854-884 PSF500 - 18mm Bore 53 366-396-004 PSF400 - Nozzle Insulator 5366-396-005 PSF500 - Nozzle Insulator 5Gas Diffusers & Insulation4 366-394-002 PSF400 - M8 Diffuser 5366-395-001 PSF500 - M8 Diffuser 55 366-397-002 PSF400 - Diffuser Insulator 5366-397-003 PSF500 - Diffuser Insulator 5Contact Tips (ECU)SIZEWIRE SIZE6 153-502-009 M8x40mm 0.8mm 10153-502-001 M8x40mm 0.9mm 10153-502-002 M8x40mm 1.2mm 10153-502-003 M8x40mm 1.4mm 10153-502-004 M8x40mm 1.6mm 10153-502-006 M8x40mm 2.0mm 10153-502-007 M8x40mm 2.4mm 10Contact Tips (CuCrZr)6 468-502-003 M8x37mm 0.8mm 10468-502-004 M8x37mm 0.9mm 10468-502-005 M8x37mm 1.0mm 10468-502-006 M8x37mm 1.1mm 10468-502-007 M8x37mm 1.2mm 10468-502-008 M8x37mm 1.4mm 10468-502-009 M8x37mm 1.6mm 10Liners (Steel )No. PART No DESCRIPTION PACK QTY7 366-549-882 0.6-0.8mm x 3mt 1366-549-883 0.6-0.8mm x 4.5mt 1366-549-884 0.9-1.0mm x 3mt 1366-549-885 0.9-1.0mm x 4.5mt 1366-549-886 1.2mm x 3mt 1366-549-887 1.2mm x 4.5mt 1366-549-888 1.4mm x 3mt 1366-549-889 1.4mm x 4.5mt 1366-549-890 1.6mm x 3mt 1366-549-891 1.6mm x 4.5mt 1Liners (PTFE)8 366-550-882 0.8mm x 3mt 1366-550-883 0.8mm x 4.5mt 1366-550-884 0.9-1.0mm x 3mt 1366-550-885 0.9-1.0mm x 4.5mt 1366-550-886 1.2mm x 3mt 1366-550-887 1.2mm x 4.5mt 1366-550-890 1.6mm x 3mt 1366-550-891 1.6mm x 4.5mt 1Liners (Steel & PTFE)ALL STEEL & PTFE LINERS ARE SUPPLIED WITH FITTINGS FOR A10 CONNECTION.EURO LINER NIPPLE IS ENCLOSED IN PACKAGINGMIG TORCH SPARES17

FroniusCompatible Fronius Mig Consumables AL & AW SeriesMIG TORCHESAL225 / AW252No. PART NO DESCRIPTION PACK QTY1 42.0100.0225 Insulator 52 42.0001.1718 Tip Adaptor M6 53 42.0001.0052 Contact Tip 0.6mm-M6 x 33mm 1042.0001.0053 Contact Tip 0.8mm-M6 x 33mm 1042.0001.0054 Contact Tip 1.0mm-M6 x 33mm 1042.0001.0055 Contact Tip 1.2mm-M6 x 33mm 104 44.0350.0610 Nozzle 12mm c/w Insulator 5AL262 / AW 3521 42.0100.0167 Insulator 52 42.0100.0233 Gas diffuser 53 42.0001.1748 Tip Adaptor M6 54 42.0001.0052 Contact Tip 0.6mm-M6 x 33mm 1042.0001.0053 Contact Tip 0.8mm-M6 x 33mm 1042.0001.0054 Contact Tip 1.0mm-M6 x 33mm 1042.0001.0055 Contact Tip1.2mm- M6 x 33mm 105 44.0350.0624 Nozzle 14mm 5AL372 / AW 5021 42.0100.0230 Insulator 52 42.0100.0134 Gas diffuser 53 42.0001.2696 Tip Adaptor M10 54 42.0001.1576 Contact Tip 0.8mm-M10 x 40mm 1042.0001.1577 Contact Tip1.0mm-M10 x 40mm 1042.0001.1578 Contact Tip 1.2mm-M10 x 40mm 1042.0001.1930 Contact Tip1.4mm-M10 x 40mm 1042.0001.1579 Contact Tip 1.6mm-M10 x 40mm 1042.0001.2314 Contact Tip 2.0mm-M10 x 40mm 105 44.0350.0632 Nozzle 17mm 544.0350.0634 Nozzle 17mm Heavy Duty 5AL2300 / AW 2500No. PART No DESCRIPTION PACK QTY1 42.0100.0167 Insulator 52 42.0001.5171 Nozzle Holder 13 42.0001.1718 Tip Adaptor M6 54 42.0001.0052 Contact Tip 0.6mm-M6 x 33mm 1042.0001.0053 Contact Tip 0.8mm-M6 x 33mm 1042.0001.0054 Contact Tip 1.0mm-M6 x 33mm 1042.0001.0055 Contact Tip 1.2mm-M6 x 33mm 105 42.0001.5173 Nozzle 12mm c/w Insulator 5AL3000 / AW 40001 42.0100.1010 Insulator 52 42.0001.2930 Nozzle Holder 13 42.0001.5084 Tip Adaptor M8 54 42.0001.2911 Tip 0.8mm-M8 x 35mm CuCrZr 1042.0001.2912 Tip 1.0mm-M8 x 35mm CuCrZr 1042.0001.2913 Tip 1.0mm-M8 x 35mm CuCrZr 105 42.0001.5096 Nozzle 13mm c/w Insulator 542.0001.5269 Nozzle 15.2mm c/w Insulator 542.0001.5151 Nozzle 11mm c/w Insulator 5AL4000 / AW 50001 42.0100.1018 Insulator - AL4000 542.0100.1016 Insulator - AW5000 52 42.0001.2970 Nozzle Holder 13 42.0001.5122 Tip Adaptor M10 54 42.0100.1007 Gas diffuser 55 42.0001.1576 Contact Tip 0.8mm-M10 x 40mm 1042.0001.1577 Contact Tip 1.0mm-M10 x 40mm 1042.0001.1578 Contact Tip 1.2mm-M10 x 40mm 1042.0001.1930 Contact Tip 1.4mm-M10 x 40mm 1042.0001.1579 Contact Tip 1.6mm-M10 x 40mm 1042.0001.2314 Contact Tip 2.0mm-M10 x 40mm 106 42.0001.5128 Nozzle 17mm 542.0001.5129 Nozzle 15mm 518 SPARE PARTS CALL 1800 935 378 TO ORDER

Compatible Fronius Mig Consumables ROBACTA 300, 500 & 5000FroniusROBACTA 300No. PART NO DESCRIPTION PACK QTY1 42.0001.2930 Nozzle Holder 12 42.0100.0425 Insulator 53 42.0001.2931 Nozzle 13mm 542.0001.2933 Nozzle 15.2mm 54 42.0001.2911 Tip 0.8mm- M8 x 35mm CuCrZr 1042.0001.2912 Tip 1.0mm-M8 x 35mm CuCrZr 1042.0001.2913 Tip 1.2mm- M8 x 35mm CuCrZr 10ROBACTA 5001 42.0001.2970 Nozzle Holder 12 42.0100.0432 Insulator 53 42.0001.2968 Nozzle 17mm 54 42.0001.1576 Contact Tip 0.8mm- M10 x 40mm 1042.0001.1577 Contact Tip 1.0mm- M10 x 40mm 1042.0001.1578 Contact Tip 1.2mm- M10 x 40mm 1042.0001.1930 Contact Tip 1.4mm- M10 x 40mm 1042.0001.1579 Contact Tip 1.6mm- M10 x 40mm 1042.0001.2314 Contact Tip 2.0mm- M10 x 40mm 10ROBACTA 50001 42.0100.1016 Insulator 52 42.0001.2970 Nozzle Holder 13 42.0001.5122 Tip Adaptor M10 54 42.0100.1007 Gas Diffuser 55 42.0001.5128 Nozzle 17mm 542.0001.5129 Nozzle 15mm 56 42.0001.1576 Contact Tip 0.8mm-M10 x 40mm 1042.0001.1577 Contact Tip 1.0mm-M10 x 40mm 1042.0001.1578 Contact Tip 1.2mm-M10 x 40mm 1042.0001.1930 Contact Tip 1.4mm-M10 x 40mm 1042.0001.1579 Contact Tip 1.6mm-M10 x 40mm 1042.0001.2314 Contact Tip 2.0mm-M10 x 40mm 10On-SiteTrade Sales…For your convenience,our on-site salespeople will come toyou to demonstratethe machines.Bookings are required,so call us todayPh 1800 935 378MIG TORCHES19

KemppiCompatible Kemppi Mig Consumables MT/PMT25 - MT/PMT35 & MT38MIG TORCHESNo. PART NO DESCRIPTION PACK QTY1 4153040 Swan Neck Spiral Spring 12 4153040F Swan Neck Flat Spring 13 4275240 Spiral Spring 54 9510540 Flat Spring 55 9591079 Locking ring 56 9580173 Contact Tip Adaptor M6 5No. PART No DESCRIPTION PACK QTY7 9876634 Contact tip M6 - 0.6mm Wire 109876635 Contact Tip M6 - 0.8mm Wire 109876636 Contact Tip M6 - 1.0mm Wire 109876637 Contact Tip M6 - 1.2mm Wire 108 9591010 Nozzle Insulator 59 9580101 Gas Nozzle Conical 13.5mm 5No. PART NO DESCRIPTION PACK QTY1 3103500 Swan Neck Only 12 9591052 Shroud Spring 53 9484008 Locking Ring 54 9591080 Insulation Ring 55 9580132 Contact Tip Adaptor M6 56 9591011 Nozzle Insulator 5No. PART NO DESCRIPTION PACK QTY7 9580102 Gas Nozzle Conical 16mm 58 9876634 Contact Tip M6 - 0.6mm Wire 259876635 Contact Tip M6 - 0.8mm Wire 259876636 Contact Tip M6 - 1.0mm Wire 259876637 Contact Tip M6 - 1.2mm Wire 25No. PART NO DESCRIPTION PACK QTY1 4254670 Insulator 52 4255420 Contact Tip Adaptor M8 53 4248710 Nozzle Insulator 54 4255530 Gas Nozzle Conical 16.5mm 5No. PART NO DESCRIPTION PACK QTY5 9580122 Contact Tip M8 - 0.8mm Wire 109580123 Contact Tip M8 - 1.0mm Wire 109580124 Contact Tip M8 - 1.2mm Wire 109580125 Contact Tip M8 - 1.4mm Wire 109580126 Contact Tip M8 - 1.6mm Wire 1020 SPARE PARTS CALL 1800 935 378 TO ORDER

Compatible Kemppi Mig ConsumablesPMT30/40/50 - PMT27/30/32W - PMT42W - MT51W - PMT52WKemppiNo. PART NO DESCRIPTION PACK QTY1 4270290 Insulator 52 4269640 Contact Tip Adaptor M8 53 4248710 Nozzle Insulator 54 4255530 Gas Nozzle Conical 16.5mm 5No. PART No DESCRIPTION PACK QTY5 9580122 Contact tip M8 - 0.8mm Wire 109580123 Contact Tip M8 - 1.0mm Wire 109580124 Contact Tip M8 - 1.2mm Wire 109580125 Contact Tip M8 - 1.4mm Wire 109580126 Contact Tip M8 - 1.6mm Wire 10No. PART NO DESCRIPTION PACK QTY1 4294880 Diffuser 52 4295740 Contact Tip Adaptor M8 53 4295760 Gas Nozzle Conical 14mm 5No. PART NO DESCRIPTION PACK QTY1 4298290 Diffuser 52 4295740 Contact Tip Adaptor M8 53 4300260 Gas Nozzle Conical 16mm 54300260C Gas Nozzle Tapered 13mm 5No. PART NO DESCRIPTION PACK QTY4 9580122 Contact tip M8 - 0.8mm Wire 109580123 Contact Tip M8 - 1.0mm Wire 109580124 Contact Tip M8 - 1.2mm Wire 109580125 Contact Tip M8 - 1.4mm Wire 109580126 Contact Tip M8 - 1.6mm Wire 10No. PART NO DESCRIPTION PACK QTY4 9580122 Contact tip M8 - 0.8mm Wire 109580123 Contact Tip M8 - 1.0mm Wire 109580124 Contact Tip M8 - 1.2mm Wire 109580125 Contact Tip M8 - 1.4mm Wire 109580126 Contact Tip M8 - 1.6mm Wire 10MIG TORCHESNo. PART NO DESCRIPTION PACK QTY1 9580265 PTFE Ring 52 9580261 Contact Tip Adaptor M8 53 9591049 Nozzle Insulator 54 4247200 Gas Nozzle Conical 17.5mm 5No. PART NO DESCRIPTION PACK QTY5 9580122 Contact Tip M8 - 0.8mm Wire 109580123 Contact Tip M8 - 1.0mm Wire 109580124 Contact Tip M8 - 1.2mm Wire 109580125 Contact Tip M8 - 1.4mm Wire 109580126 Contact Tip M8 - 1.6mm Wire 10No. PART NO DESCRIPTION PACK QTY1 4298300 Diffuser 52 4300390 Contact Tip Adaptor M8 53 4300380 Gas Nozzle Conical 18mm 5No. PART NO DESCRIPTION PACK QTY4 9580122 Contact Tip M8 - 0.8mm Wire 109580123 Contact Tip M8 - 1.0mm Wire 109580124 Contact Tip M8 - 1.2mm Wire 109580125 Contact Tip M8 - 1.4mm Wire 109580126 Contact Tip M8 - 1.6mm Wire 1021

CIGWELDTransmig 130 Twin Gun SparesITEM DESCRIPTION PART No1 Nozzle OCE1311/R2 Contact tip0.6MMOTW11/230.8MMOTW11/300.9MMOTW11/353 Complete push button assy OCE57505174 R/H Handle OCE30556125 Conduit liner OCE55800179 L/H Handle OCE305561310 Torch trigger lever OCE3120018MIG TORCH SPARESBRUMBY Transmig 180se Gun SparesITEM DESCRIPTION PART No1 Nozzle EL2215OP2 Contact tip EL16T35*3 Gas Diffuser EL52*7 Trigger Assembly 71752311 Set Screw OTW44C12 Conduit Assembly 717524Transmig 210-330 Gun SparesITEM DESCRIPTION1 NozzlePART NoRefer Page 122 Contact tip Refer Page 123 Gas Diffuser EL524 Conductor tube MS63455 O-ring, Gun Handle OTW45B*7 Trigger Lever ELC948 Trigger Blades ELC94B*10 Conduit liner OTW42/303511 O-ring, Connector Plug OTW22412 Set Screw 8/32 UNC OTW44C13 Connector Plug OTW350174Eliminator SparesITEM DESCRIPTION1 NozzlePART NoRefer Page 11 & 122 Contact tip Refer Page 123 Gas Diffuser4 Insulator Assembly ELC450 & EL450 64ELJ-34 Insulator Assembly EL600 66ELJ-35 Conductor tubes8 Hanger - ELC250 & ELC450 OTW15210 Binder Post & Screw ELC250 & ELC450 ELC124FM11 Handle with screws ELC250 & ELC450 ELC84H11 Handle with screws EL450 & EL600 EL86H12 Trigger Blade Assembly - All Models EL96B13 Trigger ELC250 & ELC450 EL9413 Trigger EL600 EL9617 Conduit liner18 Tweco® connector plug ELC250, ELC 450 OTW35017418 Tweco® connector plug EL600 OTW176S19 O-ring ELC250 & ELC450 OTW22419 O-ring EL600 OTW22521 Set Screw OTW44C22 SPARE PARTS CALL 1800 935 378 TO ORDER

BERNARDBERNARD MIG WELDING GUNSMODELQ150CURRENT & DUTY CYCLE RATING180 Amps @ 35% Duty CycleCABLE LENGTH END FITTING PART NO3m (10ft) Euro BEQ1510A07CE*MODELQ200CURRENT & DUTY CYCLE RATING240 Amps @ 35% Duty CycleCABLE LENGTH END FITTING PART NO3m (10ft) Euro BEQ2010AB7CE3m (12ft) Euro BEQ2012AO7CE*MODELQ300CURRENT & DUTY CYCLE RATING390 Amps @ 35% Duty CycleCABLE LENGTH END FITTING PART NO3m (10ft) Bernard BEQ3010AB7CB3m (10ft) Euro BEQ3010AB7CE3.6m (12ft) Euro BEQ3012AR7CE*4.6m (15ft) Bernard BEQ3015AB7CB4.6m (15ft) Euro BEQ3015AB7CEMODELQ400CURRENT & DUTY CYCLE RATING440 Amps @ 35% Duty CycleCABLE LENGTH END FITTING PART NO3.6m (12ft) Miller BEQ4012AR7EM*3.6m (12ft) Euro BEQ4012AR7EE*4.6m (15ft) Bernard BEQ4015AH7EBMODELQ500CURRENT & DUTY CYCLE RATING500 Amps @ 35% Duty CycleCABLE LENGTH END FITTING PART NO3.6m (12ft) Miller BEQ5012AH7IMMODELQ600CURRENT & DUTY CYCLE RATING550 Amps @ 35% Duty CycleCABLE LENGTH END FITTING PART NO4m (13ft) Miller BEQ6012OH7IMBERNARD Q GUN AND CABLE RATINGCE rating 100% DUTY CYCLE 60% DUTY CYCLE 35% DUTY CYCLEShielding Gas CO2 Ar/CO2 CO2 Ar/CO2 CO2 Ar/CO2Q150 150 140 180 150 225 180Q200 200 175 240 200 325 240Q300 320 270 370 310 470 390Q400 350 285 425 350 520 440Q500 420 370 480 420 575 500Q600 440 420 540 500 650 55023MIG TORCH SPARES

BERNARDMIG TORCH SPARESItem Q200 Q300 Q400# PART# PART# PART# DESCRIPTION1 See Tip/Diffusers/Nozzles/Chart Nozzle Assy.2 See Tip/Diffusers/Nozzles/Chart Contact Tip.3 See Tip/Diffusers/Nozzles/Chart Gas Diffuser4 See Tip/Diffussers/Nozzles/Chart Cap5 See Body Tube Chart Body Tube6 See Liner Chart Jump Liner7 4213B 4313B End Fitting8 4305 1540003 Cone NutNS 4991 1520017 Conduit Clamp (2 Req’d)NS 4823 4939 Jacket Clamp (2 Req’d)9 1880155 1880198 Handle Kit, Standard Trigger•Handle Kit, Locking Trigger•Handle Kit, Dual Pull Trigger•N/A DSA-1 Handle DS Standard Trigger•Handle Kit, DS Locking Trigger•10 5662 Trigger, Standard5662L••Trigger, Locking2690001 Trigger, dual Pull, 3 wireWith Insulated Terminals)11 4207 Post Fastener (1 Req’d -Q200& Q300 (5 Req’d - Q400)2030004 N/A Post Fastener, Short (4 Req’d)12 4209 Handle Screw (5 Req’d)13 2660001 Terminal, Quick Disconnect(2 Req’d)14 N/A 2520042 Handle Spring15 Replacement Cable with Fittings1060120 1060108 1060114 8’ (2.44m)1060121 1060109 1060115 10’ (3.05m)1060122 1060110 1060116 12’ (3.66m)1060123 1060111 1060117 15’ (4.57m)1060124 1060112 1060118 20’ (6.10m)1060125 1060113 1060119 25’ (7.62m)16 2520033 2520041 Strain Relief17 Rigid Strain Relief Kit(includes Top & bottom Halves)2520073 Strain Relief with Installed GasPin (Bernard Direct Plug)2520069 Strain Relief (Euro Direct Plug)2520066 Strain Relief (All other DP’s)18 4932 Butt Connector (2, Req’d)19 See Direct Plug Chart Direct Plug Components20 See Liner Chart Liner21 1880012 Heat Shield Kit (IncludesHeat Sheild Screws, Posts & Spacers)22 1790002 Hang Up Hook Kit (IncludesHook, Screw & Post)23 1982 1983Q 1984Q Rear Cone Nut Repair Kit †24 1010027 Adaptor Block (Not Req’d onBernard or Euro Direct Plug)25 W11127-002 Screw, Strain Relief (Not Req’d onBernard Direct Plug)26 GN2021 Electrical Plug - Non D/S (Not Req’d onBernard or Euro DP)20006AElectrical Plug - D/S (Not Req’d onBernard or Euro Direct Plug)24 SPARE PARTS CALL 1800 935 378 TO ORDER

BERNARDItem Q400 Q500 Q600# PART# PART# PART# DESCRIPTION1 See Tip/Diffusers/Nozzles/Chart Nozzle Assy.2 See Tip/Diffusers/Nozzles/Chart Contact Tip.3 See Tip/Diffusers/Nozzles/Chart Gas Diffuser4 See Tip/Diffussers/Nozzles/Chart Cap5 See Body Tube Chart Body Tube6 See Liner Chart Jump Liner7 1680033 1680034 End Fitting8 4416 1540004 Cone Nut9 1880202 Handle Kit- (Includes: (2) Halves,(1) # 10, (4) #13, (4) #14, (1)#16NS 1520017 4993 Conduit Clamp (2 Req’d)NS 4939 4944 Jacket Clamp (2 Req’d)10 1620001 Cover Plate (1 Req’d)for Non-Dual Schedule11 1880212 Dual Schedule Slide Switch**12 1880203 Standard Trigger †1880204 Locking Trigger †1880205 Dual Pull Trigger †13 2030027 Post Fastener (4 Req’d)14 4209 Handle Screw (4 Req’d)16 2520007 Cap17 Replacement Cable w/fittings1060132 1060138 1060144 8’ (2.44m)1060133 1060139 1060145 10’ (3.05m)1060134 1060140 1060146 12’ (3.66m)1060135 1060141 1060147 15’ (4.57m)1060136 1060142 1060148 20’ (6.10m)1060137 1060143 1060149 25’ (7.62m)18 2520041 Spring Strain Relief19 Rigid Strain Relief Kit(Includes top & Bottom Halves.)2520073 Strain Relief with Installed Gas Pin(Bernard Direct Plug)2520069 Strain Relief (Euro Direct Plug)2520066 Strain Relief (All Other DP’s)20 4932 Butt Connector (4 Req’d -Non-D/S, 8 Req’d - D/S)21 See Direct Plug Chart Direct Plug Components22 See Liner Chart Liner23 1984Q 1985 1986 Rear Cone NutRepair Kit. ( Includes: JacketClamp,Conduit Clamp, Cone Nut,End fitting, Nipple,Spacer & Butt Connectors.)24 1880199B Trigger Extension25 177289 2520053 Strain Relief26 1010027 Adaptor Block (Not Req’d on Bernardor Euro direct Plug)27 W11127-002 Screw, Strain Relief (Not Req’d onBernard Direct Plug)28 GN2021 Electrical Plug - NonD/S (Not Req’d onBernard or Euro DP)20006AElectrical Plug - D/S (Not Req’d onBernard or Euro DP)Range…Weld-Quip stock a widerange of premium productsto suit your requirements.We are constantly developingand expanding our rangeto meet the ever changingneeds.MIG TORCH SPARES25

BERNARDTIPS, DIFFUSERS, NOZZLES.ELLIPTICALMIG TORCH SPARESCENTERFIRE26 SPARE PARTS CALL 1800 935 378 TO ORDER

BERNARDMIG GUN CONSUMABLESCONTACT TIPS (PK10)NOZZLESTO SUIT 200 & 300 AMP GUNSTYPEPART NONozzle Brass & Insulator BE 4391Nozzle Brass Tapered & Insulator BE 4392Nozzle Copper & Insulator BE 4393Nozzle Copper Tapered & Insulator BE 4394TO SUIT 400 AMP GUNSTYPEPART NONozzle Brass & Insulator BE 4491Nozzle Brass Tapered & Insulator BE 4492SHORT TIPS (PK10)TO SUIT 200, 300, 350 & 400 AMP GUNSSIZE (mm)PART NO.0.6 BE 74970.8 BE 74880.9 BE 74891.0 BE 74961.2 BE 74901.4 BE 74981.6 BE 74912..0 BE 74922.4 BE 74932.8 BE 74943.2 BE 7495LONG TIPS (PK10)TO SUIT 200, 300, 350 & 400 AMP GUNSSIZE (mm)PART NO.0.9 BE 15891.2 BE 15901.3 BE 1598TO SUIT 400 & 500 AMP GUNSTYPEPART NONozzle Copper & Insulator 400/500A BE 4591Nozzle Copper Tapered & Insulator BE 4592Nozzle Copper watercooledBE 1101QDCAP & HEAD ASSEMBLIESTYPEPART NOCap 300A BE 4323Cap 400A BE 4423Head 200/300A Short Tip BE 4335Head 350/400/500A Short Tip BE 4435Head 200/300A Long Tip BE 4235Head 200/300ALong Tip Liner Guide BE 4235-116Head 350/400/500A Long Tip Liner Guide BE 4635Head 350/400/500A Long Tip Liner Guide BE 4635-116O Ring 4235/4335 Head BE 7126O Ring 4435/4635 Head BE 7127PIPELINE TIPS (PK10)TO SUIT BE 4335 HEADSIZE (mm)PART NO.0.9 BE 42811.2 BE 4282Pipeline Nozzle & Insulator BE 429527MIG TORCH SPARES

BERNARDMIG GUN CONSUMABLESBERNARD BODY TUBESSIZE (mm)PART NO.50mm 30” BEQT2 -3050mm 45” BEQT2 -4550mm 60” BEQT2 -6075mm 30” BEQT3 -3075mm 45” BEQT3 -4575mm 60” BEQT3 -60125mm 45” BEQT5 -45125mm straight BEQT5 -180175mm straight BEQT7 -180MIG TORCH SPARESTWECO TO BERNARD ADAPTORSPART NO.300 Amp Bernard head to suit Tweco torch BE 4335T400 Amp Bernard head to suit Tweco torch BE 4435TBERNARD MIG GUN PARTSLINERSTO SUIT 200, 300, 350 AMP GUNSSIZE (mm)PART NO.0.9-1.2 3.0M Steel BE 431100.8 4.6M Steel BE 430150.9-1.2 4.6M Steel BE 431150.9-1.2 4.6M Nylon BE 43115X0.9-1.2 4.6M Composite BE 19202180.9-1.2 4.6M Tweco BE 43115TTO SUIT 400 & 500 AMP GUNSSIZE (mm)PART NO.0.9-1.2 4.6M Steel BE 441151.2-1.6 4.6M Steel BE 442151.2-1.6 4.6M Nylon BE 44215N2.0 4.6M Steel BE 443152.4 4.6M Steel BE 454152.8 4.6M Steel BE 456151.6 Jumper Line Steel BEQJL- 116ALUMINIUM LINERS GUIDESTO SUIT W19SIZE (mm)PART NO.0.9-1.2 BE 27600021.2-1.6 BE 276000328 SPARE PARTS CALL 1800 935 378 TO ORDER

BERNARDBERNARD MIG GUN PARTSWIREFEEDERS ADAPTERSTO SUIT BERNARD WELDING GUNSPART NO.Bernard EZ fitting BE 1199O Ring BE 4929TO SUIT BERNARD WELDING GUNSPART NO.Euro FittingBE 1199EO Ring (small) BE 9165O Ring (large) BE 4421PART NO.Miller fittingBE 1199MO Ring (Pkt 10) MR 079974Tweco fitting to suit T4PART NO.BE 1199T4TO SUIT ALL BERNARD WELDING GUNSHANDLE KITSPART NO.Suit 200/300/350A guns BE 1780006Suit 400/500A guns BE 4408REPLACEMENT PARTSTRIGGERPART NO.Suit 180A Guns BE 2620054Suit 200/300/350A gun microswitch BE 5662Suit 200/300/350A guns (brass contacts) BE 5662YSuit 400/500A guns BE 4422RIGID STRAIN RELIEF KIT(includes Handle Kit& Strain Relief Spring) PART NO.Suits all models BE 1880074MIG TORCH SPARESSTRAIN RELIEF SPRINGPART NO.Suits Q 200/300 BE 2520033Suits Q 400 BE 2520041CONE NUT KITS PART NO. RIGID STRAINSuits 300/350A BE 1983RELIEF HANDLE KITPART NO.Suits 400A BE 1984 BE 252006929

BERNARDCONTACT TIPS CONTACT TIPS TAPERED(DISPLAY PACKETS OF 10)SIZE PART NO. PART NO.(mm) (DISPLAY PKTS ) (SOLD IN PKTS 10)0.8 BET-030DP BET-0300.9 BET-035DP BET-0351.0 BET-039DP BET-0391.2 BET-045DP BET-0451.4 BET-052DP BET-0521.6 BET-062DP BET-062(DISPLAY PACKETS OF 10)SIZE PART NO. PART NO.(mm) (DISPLAY PKTS ) (SOLD IN PKTS 10)0.8 BETT-030DP BETT-0300.9 BETT-035DP BETT-0351.2 BETT-045DP BETT-0451.4 BETT-052DP BETT-0521.6 BETT-062DP BETT-062MIG TORCH SPARESNOZZLES(DISPLAY PACKETS OF 2)TYPE PART NO. PART NO.(DISPLAY PKTS)EA.Copper Nozzle 3/4” FLUSH BEN-3400CDP BEN-3400CBrass Nozzle 3/4” 1/4 RECESSED BEN-3414BDP BEN-3414BCopper Nozzle 3/4” 1/4 RECESSED BEN-3414CDP BEN-3414CBrass Nozzle 3/4” 1/8 RECESSED BEN-3418BDP BEN-3418BCopper Nozzle 5/8” FLUSH BEN-5800CDP BEN-5800CBrass Nozzle 5/8” 1/4 RECESSED BEN-5814BDP BEN-5814BCopper Nozzle 5/8” 1/4 RECESSED BEN-5814CDP BEN-5814CBrass Nozzle 5/8” 1/8 RECESSED BEN-5818BDP BEN-5818BBrass Nozzle 1/2” SMALL FLUSH BENS-1200BDP BENS-1200BBrass Nozzle 1/2” 1/8 RECESS SMALL BENS-1218BDP BENS-1218BCopper Nozzle 1/2” DIA,1/8 RECESSED BENS-1218CDP BENS-1218CBrass Nozzle 5/8 “SMALL FLUSH BENS-5800BDP BENS-5800BBrass Nozzle 5/8” 1/8 RECESSED SMALL BENS-5818BDP BENS-5818BCopper Nozzle5/8” DIA,1/8 RECESSED BENS-5818CDP BENS-5818CBrass Nozzle3/8 “FLUSH SMALL TAPERED BENST-3800BDP BENST-3800BBrass Nozzle3/8 1/8“RECESSED SMALL TAPERED BENST-3818BDP BENST-3818BHEAD DIFFUSER ASSEMBLIES(DISPLAY PACKETS OF 2)TYPELarge DiffuserSmall DiffuserSmall Conv.Diffuser, Tweco 4 TregaskissLarge Conv.Diffuser, Tweco 4 TregaskissLarge Conv.Diffuser, Tweco 5PART NO.BED-1DPBEDS-1DPBEDS-1TDPBED-ITBED-IT5HEAD ADAPTORSTYPE (DISPLAY PACKETS OF 2)Adaptor Tweco 180/200 Amp, Magnum 250 AmpAdaptor Tweco Eliminator 250 /350Adaptor Tweco Eliminator 450 /600Adaptor Miller EdgePART NO.BE 1380005DPBE 1380012DPBE 1380017DPBE 1380018DP30 SPARE PARTS CALL 1800 935 378 TO ORDER

LINDE STYLENo 9 & 20 TIG Torch PartsNo 17,18 & 26 TIG Torch PartsTIG TORCHES31

LINDE STYLETIG TORCHESN0.9 & 20 Parts ListBuild Group Pos. Description Part. no.Torch body 1.1 Torch body SRT 9w/o fig. Torch body SRT 9 (flexible)1.2 Torch body SRT 91.11 Insulating ring 598882w/o fig. Shrink hoseWear Parts 1.21 Back cap (long) 41V241.22 Back cap (short) 41V331.23 Back cap (medium) 41V351.24 O-ring 4.6x21.3 Collet for electrode ø 0.5mm 13N20Collet for electrode ø 1.0mm13N21Collet for electrode ø 1.2mmCollet for electrode ø 1.6mm13N22Collet for electrode ø 2.0mmCollet for electrode ø 2.4mm13N23Collet for electrode ø 3.2mm13N241.4 Collet body for electrode ø 0.5-1.0mm 13N26Collet body for electrode ø 1.2mmCollet body for electrode 1.6mm13N27Collet body for electrode ø 2.0mmCollet body for electrode ø 2.4mm 13N28Collet body for electrode ø 3.2mm 13N291.51 Ceramic gas nozzle, no 4, ø 6.5mm 13N08Ceramic gas nozzle, no 5, ø 8.0mm 13N09Ceramic gas nozzle, no 6, ø 9.5mm 13N10Ceramic gas nozzle, no 7, ø 11.0mm 13N11Ceramic gas nozzle, no 8, ø 12.5mm 13N12Ceramic gas nozzle, no 10, ø 16.0mm 13N131.52 Ceramic gas nozzle, no 4, ø 6.5mm 796F71Ceramic gas nozzle, no 5, ø 8.0mm 796F72Ceramic gas nozzle, no 6, ø 9.5mm 796F73N0.17, 18 & 26 Parts ListBuild Group Pos. Description Part. no.Torch body 1.1 Torch body SRT 171.2 Torch body SRT 181.3 Torch body SRT 261.11 Insulating ring 18CGw/o fig. Shrink hoseWear Parts 1.21 Back cap (long) 57Y021.22 Back cap (short) 57Y041.23 O-ring 10 x 1.51.31 Collet 50.0mm long for electrode ø 0.5mm 10N21Collet 50.0mm long for electrode ø 1.0mm10N22Collet 50.0mm long for electrode ø 1.2mmCollet 50.0mm long for electrode ø 1.6mm10N23Collet 50.0mm long for electrode ø 2.0mmCollet 50.0mm long for electrode ø 2.4mm10N24Collet 50.0mm long for electrode ø 3.2mm10N25Collet 50.0mm long for electrode ø 4.0mm54N201.32 Collet 52.0mm long for electrode ø 0.5mm 10N21DCollet 52.0mm long for electrode ø 1.0mm10N22DCollet 52.0mm long for electrode ø 1.2mmCollet 52.0mm long for electrode 1.6mm10N23DCollet 52.0mm long for electrode ø 2.0mmCollet 52.0mm long for electrode ø 2.4mm10N24DCollet 52.0mm long for electrode ø 3.2mm10N25DCollet 52.0mm long for electrode ø 4.0mm54N20D1.4 Collet body for electrode ø 0.5-1.2mm 10N30Collet body for electrode 1.6mm10N31Collet body for electrode ø 2.0-2.4mm10N32Collet body for electrode ø 3.2mm10N28Collet body for electrode ø 4.0mm 4064881.51 Ceramic gas nozzle, no 4, ø 6.5mm 10N50Ceramic gas nozzle, no 5, ø 8.0mm10N49Ceramic gas nozzle, no 6, ø 9.5mm10N48Ceramic gas nozzle, no 7, ø 11.0mm10N47Ceramic gas nozzle, no 8, ø 9.5mm10N46Ceramic gas nozzle, no 10, ø 16.0mm10N45w/o fig. Ceramic gas nozzle, no 12, ø 19.5mm 10N441.52 Ceramic gas nozzle, no 5, ø 8.0mm 10N49LCeramic gas nozzle, no 6, ø 9.5mm10N48LCeramic gas nozzle, no 7, ø 11.0mm10N47L1.53 Ceramic gas nozzle, no 5, ø 8.0mm 10N55with metal shield.N0.9 & 20 Parts ListBuild Group Pos. Description Part. no.1.53 Ceramic gas nozzle, no 4, ø 6.5mm 796F75Ceramic gas nozzle, no 5, ø 8.0mm796F761.54 Ceramic gas nozzle, no 6, ø 9.5mm 796F79For using gas lenses1.61 Collet body with gas lens for electrode ø 0.5-1.0mm 45V42Collet body with gas lens for electrode ø 1.2mCollet body with gas lens for electrode ø 1.6mm 45V43Collet body with gas lens for electrode ø 2.0mmCollet body with gas lens for electrode ø 2.4mm 45V44Collet body with gas lens for electrode ø 3.2mm 45V451.62 Ceramic gas nozzle, no 4, ø 6.5mm 53N58Ceramic gas nozzle, no 5, ø 8.0mm53N59Ceramic gas nozzle, no 6, ø 9.5mm53N60Ceramic gas nozzle, no 7, ø 11.0mm53N611.71 Collet for electrode ø 0.5mm 13N20LCollet for electrode ø 1.0mm13N21LCollet for electrode ø 1.6mm13N22LCollet for electrode ø 2.4mm13N23LCollet for electrode ø 3.2mm13N24L1.72 Isulator 54N63-201.73 Collet body with gas lens for electrode ø 0.5-1.0mm 45VO204SCollet body with gas lens for electrode ø 1.6mm 45V1165Collet body with gas lens for electrode ø 2.4mm 45V64Collet body with gas lens for electrode ø 3.2mm 99579551.74 Ceramic gas nozzle, no 6, ø 9.5mm 57N751.75 Ceramic gas nozzle, no 8, ø 12.5mm 57N741.76 Ceramic gas nozzle, no 10, ø 16.0mm 53N881.77 Ceramic gas nozzle, no 12, ø 19.5mm 53N871.78 Ceramic gas nozzle, no 12, ø 24.0mm 53N89N0.17,18 & 26 Parts List CONT,Build Group Pos. Description Part. no.Wear Parts Ceramic gas nozzle, no 6, ø 9.5mm 10N54with metal shieldCeramic gas nozzle, no 7, ø 11.0mm10N53with metal shieldCeramic gas nozzle, no 8, ø 12.5mm10N52with metal shieldCeramic gas nozzle, no 10, ø 16.0mm10N51with metal shieldw/0 fig. Ceramic spot wqeld nozzle, no8, ø 12.5mm 10N52Pwith metal shieldGas lens accessories1.61 Insulator ( alternative for pos. 1.71) 54N011.62 Insulator ( alternative for pos. 1.72) 54N631.71 Collet body with gas lens for electrode ø 0.5-1.0mm 45V24Collet body with gas lens for electrode ø 1.6mm 45V25Collet body with gas lens for electrode ø2.0- 2.4mm 45V26Collet body with gas lens for electrode ø 3.2mm 45V27Collet body with gas lens for electrode ø 4.0mm 45V281.72 Collet body with gas lens for electrode ø 1.6mm 45V116Collet body with gas lens for electrode ø 2.4mm 45V64Collet body with gas lens for electrode ø 3.2mm 995795Collet body with gas lens for electrode ø 4.0mm 45V631.81 Ceramic gas nozzle, no4, ø 6.5mm 54N18Ceramic gas nozzle, no5 ø 8.0mm54N17Ceramic gas nozzle, no 6, ø 9.5mm54N16Ceramic gas nozzle, no7, ø 11.0mm54N15Ceramic gas nozzle, no 8, ø 12.5mm54N14Ceramic gas nozzle, no 12, ø 19.5mm54N191.82 Ceramic gas nozzle, no 5, ø 8.0mm 54N17LCeramic gas nozzle, no 6, ø 9.5mm54N16LCeramic gas nozzle, no7, ø 11.0mm54N15L1.83 Ceramic gas nozzle, no 6, ø 9.5mm 57N75Ceramic gas nozzle, no 8, ø 12.5mm57N74Ceramic gas nozzle, no 10, ø 16.0mm53N88Ceramic gas nozzle, no 12, ø 19.5mm53N871.84 Ceramic gas nozzle, ø 24.0mm 53N89(not recommended by using high flex)32 SPARE PARTS CALL 1800 935 378 TO ORDER

TIGMASTERCOLLETGAS LENS2310GLGGASKETGAS LENS NOZZLEAIRCO® STYLETIGMASTERGAS LENSINSULATORFOR YOURAIRCO® TORCHInstead if the hard to getexpensive Airco® Nozzles,you can now adapt yourTM16 and TM35 Airco® Torchto run stock Linde® Nozzles.TIG TORCHESELECTRODE 1.6MM 2.4MM 3.2MM 4.0MMDIA (1/16) (3/32) (1/8) (5/32)COLLETS 2304-0088 2304-0089 2304-0090 2304-0091GAS LENS 2304GL-116 2304GL-332 2304GL-18 2304GL-532NOZZLES 6MM 8MM 10MM 11MM 12.5MM 16MM 17MMSTANDARD 54N18 54N17 54N16 54N15 54N14 54N19SHORT 54N16SW 54N15SW 54N14SW 54N12SWLONG 54N17L 54N16L 54N15L 54N14L33

TIGMASTERTIGMASTER REPLACEMENT PARTSNOZZLESPART NO DESCRIPTION I.D SIZE TORCH2304-0069 Alumina 6mm 1/4” 42304-0070 8mm 5/16” 52304-0073 10mm 3/8” 62304-0074 11mm 7/16” 7102304-0071 Short 6mm 1/4” 42304-0072 Alumina 8mm 5/16” 510TIG TORCHES2304-0079 Alumina 6mm 1/4” 42304-0080 8mm 5/16” 52304-0081 10mm 3/8” 62304-0082 12.5mm 1/2” 82304-0083 16mm 5/8” 102304-0084 Short 6mm 1/4” 42304-0085 Alumina 12.5mm 1/2” 8GAS LENSPART NO ORRIFICE ORRIFICE2304GL-116 1.6mm 1/16”2304GL-332 2.4mm 3/32”2304GL-18 3.2mm 1/8”2304GL-532 4.0mm 5/32”GAS LENS NOZZLESORRIFICE STD LONG SHORT6mm54N188mm 54N17 54N17L10mm 54N16 54N16L 54N16SW11mm 54N15 54N15L 54N15SW12.5mm 54N14 54N14L 545N14SW16mm17mm54N1954N12SW163516351635163534 SPARE PARTS CALL 1800 935 378 TO ORDER

Innovative Cutting & Welding SolutionsCP 40Part Description Per/For Part Fig1359 Body (head) for hand torches 1208 11347 Body (head) for torches for profile mach. 1207 21290 ø0.7mm nozzles (5 pcs) 1207-1208 31516 Electrodes (5 pcs). 1207-1208 41507 Swirl-Rings (2 pcs) 1207-1208 51906 Nozzle holder 1207-1208 6CP 70Part Description Per/For Part Fig1402 Electrodes (5 pcs). 1563-1564 1Can be used btw. 15& 70 Amp 1573-15661368 Long electrodes (5 pcs). 1563-1564 1aCan be used btw. 20 & 90 Amp 1573-15661510 Swirl rings (2 pcs) Idem. 21309 ø 0.9mm nozzles (5 pcs) 1563-1564 3Can be used btw. 0 & 35 Amp. 1573-15661396 ø1mm “long life” nozzles (5 pcs) 1563-1564 3Can be used btw. 30 & 50 Amp 1573-15661308 ø1.2mm nozzles (5 pcs) 1563-1564 3Can be used btw. 45 & 70 Amp 1573-15661366 ø 0.9 long nozzle for gouging (5pcs). 1563-1564 3aCan be used btw. 0 &35 Amp 1573-15661395 ø1mm “long life” long nozzles (5 pcs) 1563-1564 3aCan be used btw. 30 & 50 Amp 1573-15665.710.171 Nozzle holder. Idem 41394 Spacing springs (5 pcs) 1564-1573 51405 Spacing bushes with 2 points (3 pcs) 1564-1573 61405 Spacing bushes with 2 points (3 pcs) 1564-1573 61351 Body for hand torches 1564-1573 71349 Body for torches for profile mach. 1573-1566 8P70-3065204 Diffuser 91356 Handgrip with push button 1564-1573PLASMA TORCH SPARES35

PLASMA TORCH SPARES* These parts can also be used toreplace the Cebora P70 torch parts.Innovative Cutting & Welding SolutionsP90/91Part Description Per/For Part Fig1368 Long Electrodes (5 pcs). 1214-1214.20Can be used btw.20 & 90 Amp. 1215-1218.501218.90 11510 Swirl-Ring (2 pcs). 1214-1214.20Can be used btw.20 & 90 Amp. 1215-1218.501218.90 21847 ø1.1mm nozzles (10 pcs). For contact cutting 1214-1214.20Can be used btw. 20 & 50 Amp. 1215 31848 ø1.2mm nozzles (10 pcs) 1214-1214.20Can be used btw. 45 & 70 Amp. 1215-1218.501218.90 31849 ø1.3mm nozzles (10 pcs) 1214-1214.20Can be used btw. 45 & 90 Amp. 1215-1218.501218.90 31907 Nozzle holder with protection 1214-1214.201215-1218.501218.90 41404 Spacing brushes with 2 points (3pcs). 1214-1214.201215 51358* Body (head)for hand torches 1214-1214.20 1215 61348* Body (head) for torches for profile mach. 1218.50-1218.90 7P90-3065212 Diffuser 8P160Part DescriptionPer/For Part Fig1376 Electrodes (5 pcs).Can be used btw. 20 & 150 Amp 11377 Swirl-Ring 21509 Extractor for Swirl-Ring 1337 31371 ø1.1mm nozzles (5 pcs) 1226-1228 4Can be used btw. 20 & 50 Amp.1372 ø1.3mm nozzles (5 pcs) 1226-1228 4Can be used btw. 40 & 90 Amp.1373 ø1.6mm nozzles (5 pcs)Can be used btw. 80 & 120 Amp. 41374 ø1.8mm nozzles (5 pcs)Can be used btw. 110 & 150 Amp 41375 ø 3 nozzle for gouging (5pcs). 1226 41398 “O-Rings” (5 pcs) 1353-1354 51378 Brass diffusers (5pcs). 1226-1228 61902 Nozzle holder suitable for gouging too. 1226-1228 71386 Spacing springs (5pcs). 1226 81408 Spacing brushes with 2 points (3pcs). 1226 91353 Body for hand torches 1226 101354 Body for torches for profile mach. 1228 1136 SPARE PARTS CALL 1800 935 378 TO ORDER

PCH-25 STYLE TORCH HEAD COMPONENTS (PAKMASTER® 25/ECONO-PAK 25)Replacement Parts Suitable for:Thermal DynamicsNoPartNo. Description NoPartNo. Description1 9-5807 Hand torch 70º 4 9-4476 Tip9-5808 Hand torch 90º 5 9-6003 Shield cup2 9-6006 Electrode 6 9-6004 Shield cup, crown w/9-60033 9-6007 Gas distributorPCH-26 STYLE TORCH HEAD COMPONENTS (ECONO-PAK 50)PartPartNo No. Description No No. Description1 9-5807 Hand torch 70º 3 9-6507 Gas distributor9-5808 Hand torch 90º 4 9-6501 Tip drag2 9-6506 Electrode 5 9-6003 Shield cupPCH/M-28 STYLE TORCH HEAD COMPONENTS (PAKMASTER® 50XL)PartPartNo No. Description No No. Description1 9-5809 Machine torch 5 9-6500 Tip, standoff2 9-5807 Hand torch 70º 9-6501 Tip, drag9-5808 Hand torch 90º 6 9-6003 Shield cup3 9-6506 Electrode, long life 7 9-6503 Shield cup, long life w/9-60034 9-6507 Gas, distributor long life 8 9-6004 Shield cup, crown w/9-6003PCH/M30 STYLE TORCH HEAD COMPONENTS (PAK®3)PLASMA TORCH SPARESPartPartNo No. Description No No. Description1 9-5522 Switch 9-6120 Tip, H.D.2 8-0530 O-ring 6 9-5500 Shield cup3 9-5503 Electrode * 8-7035 O-ring9-5582 Electrode, long * 9-5504 Continuity pin4 8-3233 Gas distributor * 9-5505 Spring5 9-5501 Tip .040 * 9-5509 Machine torch9-5581 Tip, long * 9-5512 Hand torch37

Replacement Parts Suitable for:Thermal DynamicsPCH/M-35 STYLE TORCH HEAD COMPONENTS (STAKPAK® PAKMASTER® 50)PLASMA TORCH SPARESPartPartNo No. Description No No. Description1 9-5809 Machine torch 9-6002 Tip, gouging2 9-5807 Hand torch 70º 9-6500 Tip, stand off, long life9-5808 Hand torch 90º 9-6501 Tip, drag, long life3 9-6006 Electrode 9-6502 Tip, gouging, long life9-6506 Electrode, long life 6 9-6003 Shield cup4 9-6007 Gas distributor 7 9-6503 Shield cup, long life w/9-60039-6507 Gas distributor, long life 8 9-6004 Shield cup, crown, long life5 9-6000 Tip w/9-60039-6001 Tip dragPCH/M-40 STYLE TORCH HEADCOMPONENTS (PAKMASTER® 50 XL PLUS)PartPartNo No. Description No No. Description1 9-6506 Electrode, long life 4 9-6003 Shield cup2 9-6507 Gas distributor, long life 5 9-6503 Shield cup, long life w/9-60033 9-6500 Tip, stand off, long life 6 9-6004 Shield cup, crown, long life9-6501 Tip, drag, long life w/9-60039-6502 Tip, gouging, long lifePCH 50 STYLE TORCH HEAD COMPONENTS (PAK® 5)PartPartNo No. Description No No. Description1 8-5514 O-ring 8-3321 Tip 1.2,.0472 8-5502 Collet release button w/8-5514 O-ring 12 8-5505 Shield cup3 8-5503 Spring 13 8-5519 Crown shield cup4 8-5504 O-ring * 8-1780 Switch5 8-5506 Collet * 8-1322 Switch retaining sheath6 8-5508 Electrode * 8-0533 O-ring (handle)7 8-5510 Sleeve * 8-4007 Liner wrench8 8-5515 O-ring * 8-4025 Lubricant9 8-5520 Liner w/8-5515 & 8-5521 * 8-5501 Torch body 70º10 8-5521 O-ring * 8-5512 Tip wrench11 8-5507 Tip .046 * 8-5513 O-ring tool38 SPARE PARTS CALL 1800 935 378 TO ORDER

Replacement Parts Suitable for:Thermal DynamicsPCH/M-51 STYLE TORCH HEAD COMPONENTS(4X1, 6X1, PAK® 5XR, PAK® 7XR, PAK® 5XT, PAK® 625XR AND PAK® 750XR)PartPartNo No. Description No No. Description2-2985 PCH-51 70º torch w/25’ leads 8 8-1164 Switch2-2986 PCH-51 70º torch w/50’ leads 9 9-5630 Shield cup-ceramic2-2991 PCM-51 M. torch w/25’ leads 8-2152 Shield cup Vespel®2-2992 PCM-51 M. torch w/50’ leads 8-2151 Shield cup long Vespel®1 9-5634 PCM-51 machine torch body 8-2159 Shield cup phenolic2 9-5636 Handle 10 8-5526 Crown cup3 9-5635 PCH-51 70º torch body 11 9-5779 Shield cup-metal fits over 8-21594 8-1322 Switch retaining sheath 12 4-5030 PCH-51 leads 25’5 8-5525 O-ring 4-5031 PCH-51 leads 50’6 9-5633 Electrode 4-5032 PCM-51 leads 25’9-5720 Electrode (4x1) 4-5033 PCM-51 leads 50’7 8-3321 Tip 1.2 -. 047 * 8-4053 Tip wrench9-5631 Tip 1.1 - .043 * 8-4220 Electrode wrench9-5718 Tip 1.0 - .038 * 8-4025 Lubricant9-5724 Tip 2.0 - .079 gougingPLASMA TORCH SPARES39

Replacement Parts Suitable for:Thermal DynamicsPCH/M-52 STYLE TORCH HEAD COMPONENTS (PAK® 5XR DUAL GAS, PAK® 6XR DUAL GAS, PAK® 7XR,PAK® 8XR, PAK® 10XR, PAK® 625XR DUAL GAS, PAK® 750XR, PAK® 1000XR, AND PAK® 1250XR)PLASMA TORCH SPARESPartPartNo No. Description No No. Description2-2936 PCH-52 70º torch w/25’ leads 9-5710 Gouging tip 2.4 - .093, 105 amp2-2937 PCH-52 70º torch w/50’ leads 9-5713 Gouging tip 2.75 -.113,105 amp2-2938 PCM-52 machine torch w/25’ leads 8-5129 Gouging tip .093, 80 amp2-2939 PCM-52 machine torch w/50’ leads 9 9-5522 Switch1 9-5643 PCM-52 machine torch body 10 9-5617 Shield cup-ceramic2 9-5644 Handle 9-5781 Shield cup phenolic3 9-5642 PCH-52 70º torch body 9-5712 Shield cup drag4 8-4216 Switch retaining sheath 8-5128 Shield cup gouging5 8-5525 O-ring 11 9-5694 Crown shield cup6 9-5619 Electrode - Hf. 12 9-5780 Shield cup metal fits over 9-57819-5711 Electrode dual gas 13 4-5034 PCH-52 leads 25’7 9-5618 Tip 1.1 - .043 4-5035 PCH-52 leads 50’9-5702 Tip 0.8 - .031, 35 amp, cut 4-5036 PCM-52 leads 25’9-5706 Tip .042 4-5037 PCM-52 leads 50’9-5707 Tip1.2 -. 047, 70 amp, cut * 8-5130 Heat shield9-5708 Tip1.5 - .059, 105 amp * 8-4007 Tip wrench9-5782 Tip .052, 80 amp * 9-5620 Electrode wrench8 9-5709 Gouging tip 2.0 - .078, 70 amp * 8-4025 Lubricant40 SPARE PARTS CALL 1800 935 378 TO ORDER

Replacement Parts Suitable for:Thermal DynamicsPCH/M-53 STYLE TORCH HEAD COMPONENTS (PAKMASTER®100)PartPartNo No. Description No No. Description1 9-6180 PCM-53 machine torch body 8 8-4216 Switch retaining sheath2 9-6170 PCH-53 70º torch body 9 9-5617 Shield cup ceramic3 8-5525 O-ring 9-5781 Shield cup phenolic4 9-5898 Electrode, air 9-5712 Shield cup drag5 9-5897 Tip, air, 70 amp 10 9-5694 Crown shield cup6 9-5709 Tip, gouging .078, 70 amp 11 9-5780 Shield cup metal fits over 9-57817 9-5522 Switch * 8-5130 Heat shieldPCH/M-60 STYLE TORCH HEAD COMPONENTS (PAKMASTER®75XL PLUS)PartPartNo No. Description No No. Description1 8-0532 O-ring 8-7503 Tip, cutting, 35 amp, .0392 8-7502 Electrode - Hf. 9-7726 Tip, cutting, 55 amp, .0473 8-7501 Gas distributor, cutting 6 8-7500 Shield cup8-7508 Gas distributor, gouging 7 8-7507 Shield cup, crown4 8-7506 Tip, gouging .073PCH/M-62 STYLE TORCH HEAD COMPONENTS (PAKMASTER®50XL PLUS AND CUT MASTER 50)PLASMA TORCH SPARESPartPartNo No. Description No No. Description1 8-0532 O-ring 9-8412 Tip, stand off2 9-8402 Electrode 9-8416 Tip, gouging9-8407 Electrode 5 9-8400 Shield cup3 9-8401 Gas distributor 6 9-8415 Standoff4 9-8411 Tip, drag41

Replacement Parts Suitable for:Thermal DynamicsPCH/M-70 STYLE TORCH HEAD COMPONENTS (STAK PAK®)PLASMA TORCH SPARESPartPartNo No. Description No No. Description9-5810 Hand torch 70º C 9-6012 Tip, multi gas, 35 amp9-5812 Machine torch 9-6013 Tip, multi gas, 70 amp1 9-6021 Electrode, multi gas 9-6014 Tip, gouging .0892 9-6019 Electrode, air 9-6015 Tip, gouging .1049-6020 Electrode, oxygen 9-6109 Tip, gouging .1253 9-6022 Gas distributor 5 9-6017 Crown shield cup4 9-6008 Tip, air, 35 amp 6 9-6024 Long shield cup9-6009 Tip, air, 70 amp 7 9-6016 Shield cup9-6010 Tip, oxygen, 35 amp 9-6018 Shield cup, gouging9-6011 Tip, oxygen, 70 ampPCH-75 STYLE TORCH HEAD COMPONENTS (PAKMASTER®75,PAKMASTER®75XL, PAKMASTER®100XL PLUS, ECONO PAK 100)PartPartNo No. Description No No. Description1 2-7501 PCH-75 hand torch complete w/25’ cable 6 8-7503 Tip cutting 35 amp - .0392-7502 PCH-75 hand torch complete w/50’ cable 8-7504 Tip cutting 55amp - .0462 8-7510 Hand torch head 70º 8-7505 Tip cutting 70 amp - .0523 8-0532 O-ring 8-7506 Tip gouging -.0734 8-7502 Electrode - Hf. 7 8-7500 Shield cup5 8-7501 Gas distributor, cutting 8 8-7507 Shield cup, crown8-7508 Gas distributor, gouging42 SPARE PARTS CALL 1800 935 378 TO ORDER

Replacement Parts Suitable for:Thermal DynamicsPCH/M-80 STYLE TORCH HEAD COMPONENTS ( PAKMASTER®100XL PLUS)PartPartNo No. Description No No. Description1 8-0532 O-ring 8-7503 Tip, cutting, 35 amp, drag2 8-7502 Electrode, Air/N 28-7504 Tip, cutting, 55 amp, Air/N 23 8-7501 Gas distributor, cutting 9-7728 Tip, cutting, 80 amp, Air/N 28-7508 Gas distributor, gouging 5 8-7500 Shield cup4 8-7506 Tip, gouging 8-7507 Shield cup, crownPCM-25/38 STYLE TORCH HEAD COMPONENTS (DRAG GUN 38 AND PAKMASTER ® 38XL)PartPartNo No. Description No No. Description1 9-6506 Electrode, long life 3 9-6501 Tip, drag, long life2 9-6507 Gas distributor long life 4 9-6003 Shield cupPCH/M-100 STYLE TORCH HEAD COMPONENTS (PAK®10XR)PartPartNo No. Description No No. Description1 9-5522 Switch 9-4342 Tip 1.2 - .047, 70 amp2 8-1152 O-ring 9-4341 Tip 1.5 - .059, 105 amp3 8-1108 Electrode holder w/8-1133, 8-1152 11 8-1101 Crown shield cup4 8-1133 O-ring 12 9-4345 Shield cup (machine torch)5 9-4339 Gas distributor w/8-1134 13 8-1100 Shield cup (hand torch)6 8-1134 O-ring * 8-0556 O-ring (cup)7 8-1135 O-ring * 8-0538 O-ring (handle)8 8-1106 Liner w/8-1135 * 8-1110 Electrode wrench9 9-4340 Electrode - Hf. * 8-1111 Electrode holder wrench10 9-4343 Tip 1.0 - .039, 35 amp * 8-4025 LubricantPLASMA TORCH SPARES43

Replacement Parts Suitable for:Thermal DynamicsPCH/M-100XL STYLE TORCH HEAD COMPONENTS (PAKMASTER®100XL)PLASMA TORCH SPARESPartPartNo No. Description No No. Description1 2-0001 PCH100XL hand torch comp. w/25’ cable 6 8-7503 Tip cutting 35 amp - .0392-0002 PCH100XL hand torch comp. w/50’ cable 8-7504 Tip cutting 55 amp - .0462 8-7510 Hand torch head 70º 8-7505 Tip cutting 70 amp - .0523 8-0532 O-ring 8-7506 Tip gouging - .0734 8-7502 Electrode - Hf. 7 8-7500 Shield cup5 8-7501 Gas distributor, cutting 8 8-7507 Shield cup, crown8-7508 Gas distributor, gougingPCH/M-102 STYLE TORCH HEAD COMPONENTS(75XL PLUS 60 AMP, 100XL PLUS 80 AMP AND CUTMASTER 75)PCH-120 STYLE TORCH HEAD COMPONENTS (PAKMASTER®150XL)PartPartNo No. Description No No. Description1 8-5032 O-ring 1 20-1210 Electrode2 9-8402 Electrode 2 20-1215 Gas distributor9-8407 Electrode, extended life 3 20-1220 Tip, 35 amp3 8-7501 Gas distributor, cutting 20-1221 Tip, 70 amp8-7508 Gas distributor, gouging 20-1222 Tip, 120 amp4 8-7503 Tip, cutting, 40 amp 4 20-1225 Shield cup8-7506 Tip, gouging8-7514 Tip, 60 amp8-7515 Tip, 80 amp9-7726 Tip, cutting, 60 amp9-7728 Tip, cutting, 80 amp (100 XL PLUS only)9-8406 Tip, 100 amp5 8-7500 Shield cup, cutting ’8-7507 Shield cup, crown6 8-7575 Stand-off cutting guide44 SPARE PARTS CALL 1800 935 378 TO ORDER

Replacement Parts Suitable for:Thermal Dynamics4B STYLE TORCH HEAD COMPONENTS (PAK®10)PLASMA TORCH SPARESPartPartNo No. Description No No. Description1 8-4158 Back cap (PCH-4B) 8-4211 Tip .0462 8-4050 Spring 8-4212 Tip .046 reverse swirl3 8-4156 Collet w/8-0525 (PCH-4B) 8-4170 Tip .070, 100 amp, argon/hydrogen3a 8-4197 Collet w/8-0525 (PCM-4BT) 8-4173 Tip .070, 100 amp rev. swirl argon/hydrogen4 8-0525 O-ring 8-4171 Tip .030 reverse swirl5 8-0530 O-ring 8-4189 Tip .0306 8-4069 Gasket 14 8-4088 Shield cup w/8-0554 (2)7 8-0554 O-ring 15 8-4213 Crown shield cup w/8-05548 8-4073 Electrode * 8-5513 O-ring tool9 8-4182 Sleeve * 8-4091 Tip wrench10 9-2960 O-ring * 8-4157 Liner wrench11 8-4154 Liner w/9-2960 * 8-4198 Collet wrench (PCM - 4B)12 9-2421 Gas distributor * 8-4025 Lubricant13 8-4153 Tip .059 lo-amp * 8-0532 O-ring (for backcap: PCM-4B)8-4172 Tip .059 lo-amp reverse swirl6B STYLE TORCH HEAD COMPONENTS (PAK®44 & PAK®45)PartPartNo No. Description No No. Description1 8-0531 O-ring 8-6582 Tip .113, 300 amp2 8-0527 O-ring 8-6572 Tip .125, 400 amp3 8-6615 Electrode holder w/9-2960, 8-0527 (Included with each tip 9-2863 & 9-2956 O-rings)4 9-2960 O-ring 12 8-6512 Gasket5 8-6569 Gas distributor w/8-3146 13 8-6581 Outer insulator6 8-3146 O-ring 14 8-6514 End piece7 8-6571 Liner w/8-0531 & 9-2956 15 8-6515 End cap8 9-2956 O-ring * 8-4002 O-ring removal tool9 8-6578 Electrode, general purpose * 8-4025 Lubricant9a 8-6586 Electrode lo-amp * 8-6517 Tip wrench10 9-2863 O-ring * 8-6573 Electrode wrench11 8-6580 Tip .067, 100 amp * 8-6574 Electrode holder wrench8-6648 Tip .076, 150 amp * 8-6587 Reverse swirl gas distributor w/8-31468-6575 Tip .093, 200 amp * 8-6629 Tip46 SPARE PARTS CALL 1800 935 378 TO ORDER

PCH-10 for Drag-GunPLASMA TORCHES & CONSUMABLE PARTSPCH-25/38 for PakMaster 25, Drag-Gun 38PCH/M-28 for PakMaster 50, Stak Pak IIAP30 for Transplasma AP30PCH-10 Consumables:ITEM DESCRIPTION PART No.A Tip Air OTD9/6099B Shield Cup OTD9/6003C Electrode OTD9/6006D Gas Distributor OTD9/6007E Shield Cup-Crown OTD9/0016Plasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/0016Torch Head halvesOTD9/6259PCH-10 Torch, 70º (6M) OTD2/1020PCH-25 Consumables:ITEM DESCRIPTION PART No.A Tip Air OTD9/6099B Shield Cup OTD9/6003C Electrode OTD9/6006D Gas Distributor OTD9/6007E Shield Cup-Crown OTD9/0016Plasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/5807Torch Head halvesOTD9/6259PCH-25/38 Torch, 70º (7.6M) OTD2/0251PCH/M-28 & PCH/M-35 Consumables:ITEM DESCRIPTION PART No.A Tip Air OTD9/6099B Shield Cup OTD9/6003C Electrode OTD9/6006D Gas Distributor OTD9/6007E Shield Cup-Crown OTD9/0016Plasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/5807Torch Head halvesOTD9/6259PCH-28 Torch, 70º (7.6M) OTD2/5001AP 30 Consumables:ITEM DESCRIPTION PART No.1 Gas Diffuser 6765032 Drag Tip 6765013 Electrode 67650247

PLASMA TORCH SPARESPLASMA TORCHES& CONSUMABLESPCH/M-51 Pak 5XR, Pak 625XRPCH/M-52 for Pak 625XR,Pak 1250XR, Pak 10XRPCH/M-60 for PakMaster75XL Plus (Pre January 2001)PCH/M-51 Consumables:ITEM DESCRIPTION PART No.A Tip-gouging OTD9/5724A Tip 10-40 amp Air OTD9/5718*A Tip 10-60 amp Air OTD9/5631A Tip 65 amp Air OTD8/3321*B Electrode OTD9/5633B Electrode OTD9/5720*C Shield Cup Ceramic OTD9/5630C Shield Cup-Vespel-Long OTD8/2151*C Shield Cup-Vespel Std OTD8/2152*C Shield Cup-Phenolic-Std OTD8/2159D Shield Cup-Crown(fits over OTD8/2159 OTD9/5779*D Shield Cup-Crown Ceramic OTD8/5526Plasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/5635Torch Head 180ºOTD9/5634PCH-51 Torch, 70º (7.6M)OTD2/2860PCH/M-52 Consumables:ITEM DESCRIPTION PART No.A Tip35 amp Air OTD9/5702A Tip 45-55 amp Air OTD9/5618*A Tip 60-70 amp Air OTD9/5707A Tip 80 amp Air OTD9/5782*A Tip 105 amp Air OTD9/5708A Tip Gouging OTD8/5129*A Tip Gouging 70 amp.078 OTD9/5709*A Tip Gouging 105 amp.093 OTD9/5710A Tip Gouging 105 amp.113 OTD9/5713B Electrode-Air OTD8/3331*B Electrode-Air (Plated) OTD9/5619B Electrode-Multi Gas OTD9/5711C Shield Cup - Crown Ceramic OTD9/5694C Shield Cup-Drag-Vespel OTD8/5712*C Shield Cup-Gouging Ceramic OTD9/5128*C Shield Cup-Phenolic-Std OTD9/5781C Shield Cup-Std Ceramic OTD9/5617D Shield Cup-Crown(fits over OTD9/5781) OTD9/5780** Represents Part Numbers no longer available from CIGWELD and represents reference data onlyPlasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/5642Torch Head 180ºOTD9/5643PCH-52 Torch, 70º (7.6M)OTD2/2936PCH/M-60 Consumables:ITEM DESCRIPTION PART No.1 Shield Cup OTD8/75001 Shield Cup-Crown OTD8/75072 Coil Spring OTD9/75013 Tip , Cutting 60 amp Air/N2 OTD9/77263 Tip , Cutting 35 amp, Drag OTD8/75033 Tip Gouging OTD8/75064 Gas Distributor, Cutting OTD8/75014 Gas Distributor, Gouging OTD8/75085 Electrode, Air/N2 OTD8/75026 O-Ring OTD8/0532Plasma Torch Spare PartsITEM DESCRIPTION PART No.7 Torch Head 70º OTD9/8075*PCH-60 Torch, 70º (7.6M)OTD2/6660** Represents Part Numbers no longer available from CIGWELD and represents reference data only48 SPARE PARTS CALL 1800 935 378 TO ORDER

PLASMA TORCHES& CONSUMABLESPCH/M-62 for PakMaster 50XL Plus (Early 2001)PCH/M-62 Consumables:ITEM DESCRIPTION PART No.1 Stand-off Cutting Guide OTD9/84152 Shield Cup 40 amp OTD9/84003 Coil Spring OTD9/75014 Tip, 40 amp, Drag OTD9/84114 Tip, 40 amp, Stand-off OTD9/84124 Tip, 40 amp, Gouging OTD9/84165 Gas Distributor 40 amp OTD9/84016 Electrode OTD9/84027 O-Ring OTD8/0532PCH/M-80 for PakMaster 100XL Plus (Pre January 2001)PCH/M-100XL for PakMaster 100XLPlasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/8410*PCH-62 Torch, 70º (6M)OTD7/6220* Represents Part Numbers no longer available from CIGWELD and represents reference data onlyPCH/M-80 Consumables:ITEM DESCRIPTION PART No.1 Shield Cup OTD8/75001 Crown Shield Cup OTD8/75072 Coil Spring OTD9/75013 Tip, Cutting, 80 amp, Air/N2 OTD9/77283 Tip, Cutting, 55 amp, Air/N2 OTD8/75043 Tip, Cutting, 35 amp, Drag OTD8/75033 Tip, Gouging OTD8/75064 Gas Distributor, Cutting OTD8/75014 Gas Distributor, Gouging OTD8/75085 Electrode, Air N2 OTD8/75026 O-Ring OTD8/0532Plasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD9/8705*PCH-80 Torch, 70º (7.6M)OTD2/0080** Represents Part Numbers no longer available from CIGWELD and represents reference data onlyPCH/M-100XL Consumables:ITEM DESCRIPTION PART No.1 Shield Cup - Standard OTD8/75001 Shield Cup-Crown OTD8/75072 Shield Cup-Maximum Life OTD8/74963 Canted Coil Spring OTD9/75013 Tip, Drag, 35 amp OTD8/75033 Tip, Stand-off, 55 amp OTD8/75043 Tip, Stand-off, 70 amp OTD8/75053 Tip, Gouging OTD8/75064 Gas Distributor, Cutting OTD8/75014 Gas Distributor, Gouging OTD8/75085 Electrode OTD8/7502PLASMA TORCH SPARESPlasma Torch Spare PartsITEM DESCRIPTION PART No.Torch Head 70ºOTD8/7510Torch Head 180ºOTD8/7512PCH-100XL Torch, 70º (7.6M)OTD2/000149

PLASMA TORCH SPARESPLASMA TORCHES& CONSUMABLESPCH/M-102 for PakMaster 75XL, Plus(Early 2001), PakMaster 100XL Plus (Early 2001)PCH/M-102EC for PakMaster 7e, PakMaster 9ePCH/M-150 for Pak 15XCDelivery…Ordering is easy.Simply phone, fax oremail your order and wewill deliver the productsright to your office,warehouse or job site.PCH/M-102 Consumables:ITEM DESCRIPTION PART No.1 Stand-off Cutting Guide OTD8/75751 Crown Shield Cup OTD8/75072 Shield Cup, Cutting OTD8/75003 Coil Spring OTD9/75014 Tip, 40 amp, Cutting OTD8/75034 Tip, 60 amp, Cutting OTD9/77264 Tip, 80 amp, Cutting, OTD9/77284 Tip, Gouging OTD8/75065 Gas Distributor, Cutting OTD8/75015 Gas Distributor, Gouging OTD8/75086 Electrode OTD9/84027 O-Ring OTD8/0532Plasma Torch Spare PartsTorch Head 70ºPCH-102 Torch, 70º (6M)PCH/M-102EC Consumables:ITEM DESCRIPTION PART No.1 Stand-off Cutting Guide OTD8/75751 Shield Cup, Crown OTD8/75072 Shield Cup, Cutting OTD8/75003 Coil Spring OTD9/7501E4 Tip, 40 amp, Cutting OTD8/75034 Tip, 60 amp, Cutting OTD9/77264 Tip, 80 amp, Cutting, OTD9/77284 Tip, Gouging OTD8/75065 Gas Distributor, Cutting OTD8/75016 Electrode OTD9/84027 O-Ring OTD8/0532Plasma Torch Spare PartsOTD9/8405OTD7/7530SLITEM DESCRIPTION PART No.Torch Head 70ºOTD9/8405PCH-102EC Torch, 70º (6M)OTD0/7062ECPCH/M-150 Consumables:ITEM DESCRIPTION PART No.C Shield Cup - Std - Ceramic Front OTD9/5750C Shield Cup - Std - Metal Front OTD9/5790C Shield Cup - Copper (Tip Exp) OTD9/5801*C Shield Cup - Ceramic (Tip Exp) OTD9/5758N/S Shield Cup - Gouging OTD9/5774A Tip, 50 amp, Air OTD9/5748A Tip, 100 amp, Air OTD9/5747A Tip, 150 amp, Air OTD9/5746A Tip, 50 amp, O2 OTD9/5753*A Tip, 100 amp, O2 OTD9/5752*A Tip, 150 amp, 02 OTD9/5751*A Tip,50 amp, N2 OTD9/5765*A Tip, 100 amp, N2 OTD9/5766*A Tip, 150 amp, N2 OTD9/5767A Tip, 150 amp, Ar/H2 OTD9/5775*A Tip, Gouging 85 amp .078 OTD9/5756*A Tip, Gouging 150 amp .120 OTD9/5755B Electrode-Air OTD9/5749B Electrode-O2 OTD9/5760*B Electrode-N2, Ar-H2 OTD9/5754*Plasma Torch Spare PartsITEM DESCRIPTION PART No.PCH-150 70 deg Torch HeadOTD9/5743PCH-150 90 deg Torch HeadOTD9/5744*PCM-150 180 deg Torch HeadOTD9/5745*PCM-145 180 deg Torch HeadOTD9/6410*50 SPARE PARTS CALL 1800 935 378 TO ORDER

PLASMA TORCHES& CONSUMABLESSL60 Torch for AP40i, AP70. CUTMASTER 38, CUTMASTER 81SL100 Torch for AP90, CUTMASTER 101SL60 Consumables:DESCRIPTIONElectrode Maximum LifeTip, 20A, DragTip,30A, DragTip, 40A, DragTip, 40A, CuttingTip, 50/55A, CuttingTip, 60A, Cutting,Tip, 40A, Gouging, shallowTip, 40-100A, Gouging, deepShield Cup OTD9/8218Shield Cup BodyShield Cap, Drag, 50-60AShield Cap, DeflectorShield Cap, GougingPlasma Torch Spare PartsDESCRIPTIONTorch Head with O-ringsO-ring torch head (large)O-ring torch head (small)Starter CartridgeSL100 Consumables:DESCRIPTIONElectrode Maximum LifeTip, 20A, DragTip,30A, DragTip, 40A, DragTip, 40A, CuttingTip, 50/55A, CuttingTip, 60A, Cutting,Tip, 70A, CuttingTip, 80A, CuttingTip, 90/100A, CuttingTip, 40A, Gouging, shallowTip, 40-100A, Gouging, deepTip, 40-100A, Gouging, moderateTip, 40-100A, Gouging, shallowShield CupShield Cup BodyShield Cap, Drag, 50-60AShield Cap, Drag, 70-100AShield Cap, DeflectorShield Cap, GougingPART No.OTD9/8215OTD9/8205OTD9/8206OTD9/8207OTD9/8208OTD9/8209OTD9/8210OTD9/8225OTD9/8226OTD9/8237OTD9/8235OTD9/8243OTD9/8241PART No.OTD9/8219OTD8./3487OTD8./3486OTD9/8213PART No.OTD9/8215OTD9/8205OTD9/8206OTD9/8207OTD9/8208OTD9/8209OTD9/8210OTD9/8231OTD9/8211OTD9/8212OTD9/8225OTD9/8226OTD9/8227OTD9/8228OTD9/8218OTD9/8237OTD9/8235OTD9/8236OTD9/8243OTD9/8241PLASMA TORCH SPARESPlasma Torch Spare PartsDESCRIPTIONTorch Head with O-ringsO-ring torch head (large)O-ring torch head (small)Starter CartridgePART No.OTD9/8219OTD8/3487OTD8/3486OTD9/821351

Compatible Hypertherm ConsumablesPLASMA TORCH SPARES40-80AmpNo. PART NO DESCRIPTION PACK QTY1 120925 Swirl Ring 12 120926 Electrode 53 120932 Tip 40 Amp 10120931 Tip 60 Amp 10120927 Tip 80 Amp 104 120928 Retaining Cap 15 120929 Shield-Hand Torch 16 120930 Shield-Machine Torch 1100 AmpNo. PART NO DESCRIPTION PACK QTY7 220051 Swirl Ring 18 220037 Electrode 59 220011 Tip 100 Amp 1010 220048 Retaining Cap 111 220065 Shield-Hand Torch 112 220047 Shield-Machine Torch 1No. PART NO DESCRIPTION PACK QTY1 120547 Electrode 02/Air c/w O Ring 100 Amp 1120667 Electrode 02/Air c/w O Ring 200 Amp 1020415 Electrode Ar/H c/w O Ring 200 Amp 12 020689 Nozzle .038 Air 40 Amp 13 020616 Nozzle .055 02 100 Amp (Max 200) 1020611 Nozzle .059 Air, N2, Ar/H 100 Amp 1No. PART NO DESCRIPTION PACK QTY2 020608 Nozzle .086 Air, N2, Ar/H 200 Amp 1020605 Nozzle .082 02 200 Amp 1020690 Nozzle .055 02 100 Amp (HT2000) 1020690 Nozzle Gouging Air 200 Amp 15 020423 Retaining Cap 16 020448 Shield Cap Air, N2, Ar/H 100 Amp 1020424 Shield Cap 02 Air, N2, Ar/H 200 Amp 152 SPARE PARTS CALL 1800 935 378 TO ORDER

Compatible Hypertherm ConsumablesNo. PART NO DESCRIPTION PACK QTY1 020239 Swirl Ring 12 020220 Electrode 53 020299 Tip 0.73 - .029 10No. PART NO DESCRIPTION PACK QTY1 020361/N Swirl Ring 12 120573 Electrode 53 020350 Tip 0.96 - .038 10020395 Tip 1.06 - .042 10No. PART NO DESCRIPTION PACK QTY1 020382 Extended Electrode 52 220013 Swirl Ring 1No. PART No DESCRIPTION PACK QTY4 020382 Extended Electrode 55 020381 Extended Tip 0.73 - .029 106 020218 Nozzle Retaining Cap 1No. PART NO DESCRIPTION PACK QTY4 020542 Pipe Saddle Tip 105 120574 Extended Electrode 56 020546 Extended Tip .096 - .038 107 020930 Nozzle Retaining Cap 1No. PART NO DESCRIPTION PACK QTY3 120504 Extended Tip 0.81 - .032 104 220016 Nozzle Retaining Cap 1PLASMA TORCH SPARESNo. PART NO DESCRIPTION PACK QTY1 120576 Swirl Ring 12 120573 Electrode 53 120826 Tip 40 Amp 104 120574 Extended Electrode 55 120606 Extended Tip 35 Amp 10No. PART NO DESCRIPTION PACK QTY6 120600 Nozzle Retaining Cap 17 120303 Deflector 18 120828 Shield - Hand Torch 19 120827 Shield - Machine Torch 153

Compatible Hypertherm ConsumablesPLASMA TORCH SPARESNo. PART NO DESCRIPTION PACK QTY1 020361/N Swirl Ring 12 120573 Electrode 53 120438 Tip 40 Amp 10120282 Tip 50 Amp 104 020395 Tip 50 Amp - Hand 105 120574 Extended Electrode 56 120304 Extended Tip 107 120305 Tip Pipe Saddle 10No. PART No DESCRIPTION PACK QTY8 120301SP Retaining Cap 19 120283SP Shield - Hand Torch 110 120326SP Shield - Machine Torch 111 051987 Spring Holder Protection Nut 112 051907 Spacer Spring 513 020930 Nozzle Retaining Cap 1No. PART NO DESCRIPTION PACK QTY1 120576 SwirlRing 12 120573 Electrode 53 120577 Tip 55 Amp - Shielded 104 120574 Extended Electrode 55 120606 Extended Tip 35 Amp 10120578 Extended Pipe Saddle Tip 55 Amp 10No. PART NO DESCRIPTION PACK QTY6 120600 Retaining Cap 17 120601 Shield - Hand Torch 18 120602 Shield - Machine Torch 19 120303 Deflector154 SPARE PARTS CALL 1800 935 378 TO ORDER

SPOTWELDING TIP SPARESWeld-quip supplies a complete range of resistancewelding tips, adaptors and accessories to suit allmachines including ARO, Aston, CIG, ECE, EMF,Murex, Norman Relion,CEA and TECNA.All standard parts are listed in this catalogue withequivalent part numbers where applicable.Chromium-copper alloysThese parts are produced to the highest standards, using the finest available materials. Standard tips aremachined from a work hardening chromium-copper alloy developed exclusively for spot welding tips. Typicalcomposition is 99.5% Cu/O. 0.5%Cr conforming to RWMA Class 2 specifications, two stage heat treated.Beryllium-copper alloysStandard 5/8 inch diameter tips are available in beryllium copper are available in beryllium-copper alloy at 150%surcharge on listed prices.Tungsten Copper - ElkoniteThese tips are available to special order with brazed tungsten copper inserts.Copper Bar StockWeld-Quip can supply chromium-copper bar in all standard sizes from stock, as detailed in page 15.Tungsten Copper - ElkoniteFrom 1/4 inch to 1 inch diameter in 8 inch lengths from stock.MolybdenumFrom 1/4 inch to 1 inch diameter in 8 inch lengths from stock.SPOT WELDING TIP SPARES55

STANDARD TIPS 5/8 inch diameter, 5 degree taperPart NoSPOT WELDING TIP SPARESSTANDARD TIPS 1/2 inch diameter, 5 degree taper56 SPARE PARTS CALL 1800 935 378 TO ORDER

Part NoSPOT WELDING TIP SPARES57

Part NoSPOT WELDING TIP SPARES58 SPARE PARTS CALL 1800 935 378 TO ORDER












ARC AIRGOUGING TORCHESGOUGING TORCH SPARESAEC 4000-1Part No.Part No.No AEC 4000-1 Description No AEC 4000-1 Description1 AEC-302-1 Swivel cable assembly 7’ 12 AEC-311 Cable insulating boot*2 AEC-312-1 Swivel cable assembly 12’ 13 AEC-316R Spool assembly3 AEC-403 Insular assembly with screws 14 AEC-316-1R O-ring (package of 2)4 AEC-404 Long tong and valve body 15 AEC-321 Swivel joint assembly5 AEC-410 Pin 16 AEC-322 Swivel joint stem6 AEC-305 Swivel head with screw 17 AEC-323 Swivel joint male nut*7 AEC-305F Flat swivel head with screw 18 AEC-326 Swivel joint spring8 AEC-407 Upper arm 19 AEC-327 Swivel joint bushing9 AEC-408 Lever assembly with screw 20 AEC-3-029 Female cable connector10 AEC-409 Spring *21 AEC-3-040 Air hose connector11 AEC-450 Handle *22 AEC-3-041-TW Power cable extension* Items are optional70 SPARE PARTS CALL 1800 935 378 TO ORDER

MULTIPLE STORAGE SYSTEMS KITSCASE SOLVEDROLA-CASE offers an easy selection of kits to suit your storage needs and are suitable for individual use, or can be addedvertically or horizontally at any time as your storage requirements demand.RCSK2RCDK3RCSK5RCSK3RCSKMRCDK4RCDK2ROLA-CASEDRAW SYSTEMSRCSK4MULTIPLE STORAGE SYSTEMS KITSRCDK5RCDKM/EN71

NOTESHire or buyoptionsavailableAsk us aboutour flexible leaseoptions.›For more information call1800 935 3781800 WELD QUIP72 SPARE PARTS CALL 1800 935 378 TO ORDER

Call us for allyour serviceand repairs✓✓✓✓ServiceDepartmentOn-siteServiceTest & Tag24hr ResponseTimeFor moreinformation call1800 935 3781800 WELD QUIPNOTES73

NOTESDo you havethe rightsafety gear?Please be sure tofollow individualmanufacturerssafety instructions.For more information call1800 935 378 ?1800 WELD QUIP74 SPARE PARTS CALL 1800 935 378 TO ORDER

Ask us about our complete range ofengineering supply cataloguesCall 1800 935 378 to order©Weld-Quip Supply Co. 2009. All rights reserved.The entire contents of this catalogue are copyright. Photocopying, scanning, duplications, or copying of the pictures or information (except as permitted under the Copyright Act) is a breachof copyright and may result in legal action. No part of this catalogue may be stored electronically in any form without specific written permission from Weld-Quip Supply Co. Weld-QuipSupply Co. acknowledge the permission given by their suppliers and others in the use of trademarks and images. Non-genuine parts may be advertised with reference to the originalmanufacturer’s trade name and/or part number for identification purposes only. All trademarks and trade names are the property of their respective owners.All work practice recommendations, test results, suitability for use and productivity claims made in this catalogue are indicative only. All products are supplied subject to Weld-Quipsterms and conditions of sale which are available on request. Dimensions are subject to verification. General information E&OE. Weld-Quip Supply Co. reserve the right to modify designs,specifications, colours, models and part numbers or withdraw products without notice. All prospective purchases and users should conduct their own tests to determine the suitability ofproducts to actual job conditions. Whilst every effort will be made to ensure supply, some goods may not be available in all areas.

WELD QUIP SUPPLY CO.Engineering Supply Specialists2 Hollylea Road Leumeah,NSW 25601800 935 378

01. SPARE PARTS Ph: 1800 935 378 - Weld-Quip

Create successful ePaper yourself

Delete template?

Save as template?