10. Air & Power Tools Ph: 1800 935 378 - Weld-Quip

01. BRASS FITTINGS, HOSE & HOSE CLAMPS01. Brass Fittings, Hose & Hose ClampsStandard Compression Brass Fittings -Universal Sleeves No. 100Part No.Description100-1/8 Universal Sleeve 1/8100-3/16 Universal Sleeve 3/16100-1/4 Universal Sleeve 1/4100-5/16 Universal Sleeve 5/16100-3/8 Universal Sleeve 3/8100-1/2 Universal Sleeve 1/2Brass Caps & Taper PlugsPart No.Description33-1/4 Cap 1/4 BSP. Female #3333-1/8 Cap 1/8 BSP. Female #3333-3/8 Cap 3/8 BSP. Female #3340.152 Taper Plug 1/8 BSP Male # 6440.1521 Taper Plug 1/4 BSP Male # 6440.1522 Taper Plug 3/8 BSP Male # 6440.1523 Taper Plug 1/2 BSP Male # 64Brass Reducing Bushes No.24Part No.Description41.153 Reducing Bush 1/4 x 1/8 BSP #2441.1532 Reducing Bush 3/8 x 1/4 BSP #2441.1531 Reducing Bush 3/8 x 1/8 BSP #2441.1535 Reducing Bush 1/2 x 3/8 BSP #2441.1533 Reducing Bush 1/2 x 1/8 BSP #2441.1534 Reducing Bush 1/2 x 1/4 BSP #24Brass Elbows & Tee PiecesPart No.Description25/1/08 M & F Threaded Elbow 1/8 BSP #2534-1/4 Female Elbow 1/4 BSP. Female #3434-3/8 Female Elbow 3/8 BSP. Female #3435-1/4 Female Tee Piece 1/4 BSP # 34No.72 Brass Male & FemaleAdaptorPart No.72-1/8x1/8DescriptionM & F Adapter 1/8 BSP. Fx1/8 BSP.Male #7242.1541 M & F Adapter 1/4 BSP. Fx1/8 BSP.Male #7272-1/4x1/472-3/8x1/8M & F Adapter 1/4 BSP. Fx1/4 BSP.Male #72M & F Adapter 3/8 BSP. Fx1/8 BSP.Male #7242.1543 M & F Adapter 3/8 BSP. F x 1/4 BSP.Male #7272-3/8x3/872-1/2x1/4M & F Adapter 3/8 BSP. F x 3/8 BSP.Male #72M & F Adapter 1/2 BSP. F x 1/4 BSP.Male #7242.1545 M & F Adapter 1/2 BSP. F x 3/8 BSP.Male #7272-1/2x1/2M & F Adapter 1/2 BSP. F x 1/2 BSP.Male #7235-3/8 Female Tee Piece 3/8 BSP # 3537-1/4 Female Cross Piece 1/4 BSP # 3747.161 M & F Threaded Elbow 1/4 # 2547.1611 M & F Threaded Elbow 3/8 BSP # 25No. 73 Male Brass HexagonReducing NipplePart No.DescriptionNo.27 Male Hexagon NipplePart No.Description39.15 Hex Nipple 1/8 BSP # 2742.1543 Reducing Nipple 1/4 x 1/8 BSP. Male# 7372-3/8x3/872-1/2x1/4Reducing Nipple 3/8 x 1/8 BSP. Male# 73Reducing Nipple 3/8 x 1/4 BSP. Male# 7342.1545 Reducing Nipple 1/2 x 1/4 BSP. Male# 7372-1/2x1/2Reducing Nipple 1/2 x 3/8 BSP. Male# 73 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLSP10 Brass Female TailpieceAir Hose Flex (Continued...)Part No.DescriptionPart No.Description28.1208 Male Tail Piece 3/8t x 1/4 BSP28.1213 Male Tail Piece 3/8t x 3/8 BSP29.1255 Female Tail Piece 3/16t x 1/4 BSPFemale29.1256 Female Tail Piece 1/4t x 1/4 BSPFemaleAH6MM1DP/TB012HLM050P/TB010/1006mm 1d Blue Air Hose12mm True Blue PVC Airline50mm M/O PVC Blue Layflat Hose10mm True Blue PVC Airline29.1258 Female Tail Piece 3/8t x 1/4 BSPFemale29.1262 Female Tail Piece 3/8t x 3/8 BSPFemale29.1267 Female Tail Piece 1/2t x 1/2 BSPFemaleP3-5/16TX1/4Male Tail Piece 5/16t x 1/4 BSP MaleP3O’Clip Pliers & Clamps• Top quality two ear zinc plated steelo’clips• Permanent security fixtureP3-3/8TX1/4P3-1/2TX1/4P3-3/8TX3/8Male Tail Piece 3/8t x 1/4 BSP Male P3Male Tail Piece 1/2t x 1/4 BSP Male P3Male Tail Piece 3/8t x 3/8 BSP Male P3Part No.DescriptionP5 Brass Nut & TailsPart No.Description36.136 Nut & Tail 1/4t x 1/4 BSP Female P5P5-5/16Tx1/4 Nut & Tail 5/16t x 1/4 BSP Female P5P5-5/16Tx3/8 Nut & Tail 5/16t x 3/8 BSP Female P5P5-3/16Tx1/14 Nut & Tail 3/16t x 1/4 BSP Female P521.2571 ‘O’ Clip Plier #1099 Side Top Pincers53.18 ‘O’ Clip Clamp 5-7mm dia Hose53.1801 ‘O’ Clip Clamp 7-9mm dia Hose53.1802 ‘O’ Clip Clamp 9-11mm dia Hose53.1803 ‘O’ Clip Clamp 11-13mm dia Hose53.1804 ‘O’ Clip Clamp 13-15mm dia Hose53.1805 ‘O’ Clip Clamp 15-18mm dia Hose53.1806 ‘O’ Clip Clamp 17-20mm dia HoseP5-3/16Tx1/8Nut & Tail 3/16t x 1/8 BSP Female P536.1375 Nut & Tail 1/4t x 3/8 BSP Female P536.137 Nut & Tail 3/8t x 1/4 BSP Female P5Hose JoinersPart No.DescriptionMini Ball Valves• Ideal for applications such asIndustrial, Pneutic, Domestic andHydraulic• Chrome plated brass27.128 Hose Joiner 3/16 Tube P7-3/1627.1281 Hose Joiner 1/4 Tube P7-1/427.1282 Hose Joiner 5/16 Tube P7-5/1627.1283 Hose Joiner 3/8 Tube P7-3/827.1284 Hose Joiner 1/2 Tube P7-1/2Air Hose Flex• Twin core flex quality air hose• With selected range of coupling andadaptors• UV Stabilised• Suitable for compressed airapplicationsPart No.Description66.035 Female 1/8” 220psi 90oC Air, Fuel, Oil, Water. Chrome PlatedBrass66.0351 Female 1/4” 220psi 90oC Air, Fuel, Oil, Water. Chrome PlatedBrass66.0352 Female 3/8” 220psi 90oC Air, Fuel, Oil, Water. Chrome PlatedBrass66.0353 Female 1/2” 220psi 90oC Air, Fuel, Oil, Water. Chrome PlatedBrass66.0354 Female/Male 1/4” 220psi 90oC Air, Fuel, Oil, Water. ChromePlated Brass

01. BRASS FITTINGS, HOSE & HOSE CLAMPS/ 02. AIR Couplings01. BRASS FITTINGS, HOSE & HOSE CLAMPS (Continued...)Hose Clamps• Zinc plated mild steel hose clamps• Secure fittings ultilised on Air hose• Variety of sizes available for allneeds• Easily removed if changing fitting• ReuseableCejn Style Couplings & Nipples (Continued...)Part No.Description59.3497 Cejn Style Coupling 1/4 BSP Male59.3498 Cejn Style Coupling 3/8 BSP MalePart No.DescriptionPart No.HC2HC2AHC2XHC3HCIHCIAHCIXHCOOHCOOOHCOXDescription40-55 Steel Hose Clamp35-40 Steel Hose Clamp45-60 Steel Hose Clamp55-70 Steel Hose Clamp25-35 Steel Hose Clamp22-30 Steel Hose Clamp30-40 Steel Hose Clamp13-20 Steel Hose Clamp9-12 Steel Hose Clamp18-25 Steel Hose Clamp59.3483 Cejn Style Coupling 1/4 BSP Female59.3484 Cejn Style Coupling 3/8 BSP FemalePart No.Air Couplings (Nitto Style)• High flow capacity• Heavy duty steelDescription59.3483 Cejn Style Nipple 1/4 BSP Female59.3484 Cejn Style Nipple 3/8 BSP Female• Quick release compressed air hose fittings02. Air CouplingsCejn Style Couplings & Nipples• Anti release flange• Interchanges with Cejn equivalent• Used in large air consumption applicationsPart No.Description59.3491 Cejn Style Coupling 8mm Hose Tail59.3492 Cejn Style Coupling 10mm Hose Tail59.3493 Cejn Style Coupling 12mm Hose TailPart No.200-20SH200-30SH200-40SHPart No.200-20SF200-30SF200-40SFDescriptionNitto Hi-Cupla 200 Coupling 6mm(1/4”) ID HoseNitto Hi-Cupla 200 Coupling 10mm(3/8” )ID HoseNitto Hi-Cupla 200 Coupling 12mm(1/2”) ID HoseDescriptionNitto Hi-Cupla 200 Coupling 1/4 BSPFemaleNitto Hi-Cupla 200 Coupling 3/8 BSPFemaleNitto Hi-Cupla 200 Coupling 1/2 BSPFemalePart No.Description59.3480 Cejn Style Nipple 1/4 BSP Male59.3481 Cejn Style Nipple 3/8 BSP MalePart No.20PM30PM40PMDescriptionNitto Hi-Cupla Plug 1/4 BSP MaleNitto Hi-Cupla Plug 3/8 BSP MaleNitto Hi-Cupla Plug 1/2 BSP MalePart No.Description59.3486 Cejn Style Nipple 6mm Hose Tail59.3487 Cejn Style Nipple 8mm Hose Tail59.3488 Cejn Style Nipple 10mm Hose Tail59.3489 Cejn Style Nipple 12mm Hose TailPart No.20PH30PH40PHDescriptionNitto Hi-Cupla Plug 6mm (1/4”) IDHoseNitto Hi-Cupla Plug 10mm (3/8”) IDHoseNitto Hi-Cupla Plug 10mm (1/2”) IDHose AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLSAir Couplings (Nitto Style) (Continued...)Air Couplings (JP Series 310 Style)Part No.200-20SM200-30SM200-40SMDescriptionNitto Hi-Cupla 200 Coupling 1/4 BSPMaleNitto Hi-Cupla 200 Coupling 3/8 BSPMaleNitto Hi-Cupla 200 Coupling 1/2 BSPMale• Single button• Heavy duty, industrial strengthPart No.Description13-0980 JP Series 310 1/4 BSP FemaleCouplingPart No.20PF30PF40PFDescriptionNitto Hi-Cupla Plug 1/4 BSP FemaleNitto Hi-Cupla Plug 3/8 BSP FemaleNitto Hi-Cupla Plug 1/2 BSP FemalePart No.Description31-1107 JP Series 310 1/4 BSP Male AdapterAir Couplings (JP Series 900 Style)• Stainless steel balls• Knurled sleeve for extra grip• Interchanges with Ryco equivalentPart No.Description31-1117 JP Series 310 1/4 Barb Hose Tail31-1118 JP Series 310 5/16 Barb Hose Tail31-1119 JP Series 310 3/8 Barb Hose TailPart No.Description09-0800 JP Series 900 1/4 BSP FemaleCouplingPart No.Description13-0965 JP Series 310 Coupling 1/4 BSP MalePart No.Description19-0870 JP Series 900 1/4 BSP Male AdapterPart No.Description31-1111 JP Series 310 1/4 BSP Female AdapterPart No.Description19-0875 JP Series 900 1/4 Barb Adapter HoseTail19-0876 JP Series 900 5/16 Barb AdapterHose Tail19-0877 JP Series 900 3/8 Barb Adapter HoseTail19-0879 JP Series 900 3/8 Barb Adapter HoseTailPart No.Description09-0815 JP Series 900 1/4 BSP Male CouplingPart No.Description19-0872 JP Series 900 1/4 BSP Female AdapterCheck out ourSafety EquipmentCataloguefor our wide range ofEye Protection.1800 935 3781800 WELD QUIP

03. Air FILTERS & REGULATORS/ 04. Manifolds & Swivel Connectors/05. Spray Guns & Accessories03. Air FILTERS & REGULATORS1/4” Mini Filter Regulator• Maximum working pressure 150 psig• Semi auto water drain• Mounting bracket• Pressure gauge• Poly carbonate bowlPart No.1/4” Filter Regulator• Maximum working pressure 150 psig• Automatic water drain• Mounting bracket• Pressure gauge• Poly carbonate bowl with metal bowlguard• Robust metal constructionPart No.1/2” Filter Regulator• Maximum working pressure 150 psig• Automatic water drain• Mounting bracket• Pressure gauge• Poly carbonate bowl with metal bowlguard• Robust metal constructionPart No.Description6.2432 1/2” Filter Regulator1/4” Filter Regulator and Lubricator• High visibility for lubricant drop• Maximum working pressure 150 psig• Automatic water drain• Wall mounting bracket• Pressure gaugeDescription6.241 1/4” Mini Filter RegulatorDescription6.2426 1/4” Filter Regulator• Poly carbonate bowl with metal bowlguard• Robust metal construction1/4” Filter Regulator and Lubricator (Continued...)Part No.1/4” Regulator• Provides a constant outlet pressure• Maximum working pressure 150 psig• Locking pressure adjustment knob• Mounting bracket• Pressure gauge• Robust metal construction• Compact and lightweightPart No.Description6.2461 1/4” Regulator1/4” Filter• General purpose filter for water andparticle• Maximum working pressure 150 psig• Automatic water drain• Mounting bracket• Pressure gauge• Bowl can be attached and detachedwith one hand• Robust metal constructionPart No.Description6.2454 1/4” Filter1/4” Lubricator• Oil needle for easy oil level adjustment• Accurate lubrication of downstreamequipment• Maximum working pressure 150 psig• Automatic water drain• Mounting bracket• Pressure gauge• Poly carbonate bowl with metal bowl guard• Robust metal constructionPart No.Description6.2445 1/4” Filter Regulator and LubricatorDescription6.2473 1/4” Lubricator AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS05. Spray Guns & AccessoriesSub Micronic Air Filter• 1/2” side entry points• Used for drying compressed air• Great for extending the life of your plasma partsSpray Guns GeneralPurpose• Suitable for a wide range of sprayableproducts including paint and industrialcoatings.Part No.M26DescriptionSub Micronic Air FilterCellulose Fibre Element• Polyethylene Core• To suit M26Part No. Type FluidTip(mm)AirConsump(l/min)Compressor(cfm)SuitableforSG1000-13S Gravity 1.3 170 6-8 2 Pak Topcoat, Enamel& PolyurethaneSG1000-15G Gravity 1.5 181 6-12 2 Pak Basecoat,Enamel & AcrylicLacquerPart No.M723DescriptionCellulose Fibre ElementSG1000-18G Gravity 1.8 201 6-12 Acrylic Lacquer,Furniture Lacquer,Industrial enamel &PrimerSG1000-13S Suction 1.3 170 6-8 2 Pak Topcoat, Enamel& Polyurethane04. Manifolds & Swivel ConnectorsManifolds• High flow design• Ideal for running more than oneoutlet• Alloy constructionSG1000-15S Suction 1.5 181 6-10 2 Pak Basecoat,Enamel & AcrylicLacquerSG1000-18S Suction 1.8 201 6-12 Acrylic Lacquer,Furniture Lacquer,industrial Enamel &PrimerSpray Guns Pro Series• Provides a fine finish ideal for qualitytop coat applications.• These guns are the best choice forconventional spraying for qualityfinishes.Part No.Description66.1654 5 Way Manifold Straight In 1/4” Out 1/4” Anodised Aluminium66.1655 3 Way Manifold Round In 1/4” Out 1/4” Anodised AluminiumPart No. Type FluidTip(mm)AirConsump(l/min)Compressor(cfm)SuitableforSwivel Connectors• For direct connection to all air tools• Prevents hose kink• Steel connectorSP1000-13S Suction 1.3 229 6-8 2 Pak Topcoat, Enamel& PolyurethaneSP1000-18S Suction 1.8 252 6-12 Acrylic Lacquer,Furniture Lacquer,Industrial Enamel &PrimerSP2000-15S Suction 1.5 306 8-12 2 Pak Basecoat,Fine Finish Top Coat,Enamel & PolyurethaneSP2000-18S Suction 1.8 314 12-15 Enamel & AcrylicLacquerSP4000-14G Gravity 1.4 300 8-12 2 Pak Basecoat, FineFinish Top Coat &PolyurethanePart No.Description24.0743 Female to Male 1/4” x 1/4” SteelSP4000-20G Gravity 2.0 323 10-15 Acrylic lacquer, PrimerFiller, Metallic &Industrial Enamel

05. Spray Guns & Accessories/ 06. spot weld mills/ 07. air grinders/08. air bevelers/ 09. AIR DRILLS/ 10. HOSE REELS/05. Spray Guns & Accessories (Continued...)07. AIR GRINDERSPressure Pots• Ideal in large applications.• Ideal on structural steel.Air Angle Grinders• Sizes from 100mm• Industrial qualloty grinder with leverthrottle (further information availableon request)Part No.Description02007-T 5M Pro Pressure Pot Hose02102 2 Ltr Star Pro Pot No.202105-B 10Ltr Propot & Hose02210-M 10Ltr pro Pressure PotPart No.SI-2500LSI-2501LSI-2505LSI-2515L-14SI-2600LDescription100mm Angle Grinder, Heavy Duty, Lever Throttle, Governed100mm Compact Angle Grinder, Lever Throttle, Governed125mm Angle Grinder, Heavy Duty, Lever Throttle, Governed125mm Angle Grinder Heavy Duty, Lever Throttle, Governed180mm Angle Grinder Heavy Duty, Safety Lever Throttle,Governed06. spot weld millsSpot Weld Mills• Air operatedAir Die Grinders• Safety lever throttle• Variable speed• Designed for use withburrs/files and mounted pointsPart No.SI-5800SI-5850ADescriptionStraight Spot Mill 8mm Collect CapacityPistol Spot Mill 8mm Collect CapacityPart No. Description SpecificationsSI-2001S 1/4” Compact Die Grinder 1/4” Collet, 25000rpm,151mm Length, 0.37kgSI-2002SI-20051/4” Compact Die Grinder- Polymer Body Cover1/4” Right Angle Die Grinder- Polymer Body Cover,1/4” Collet, 25000rpm,151mm Length, 0.38kg1/4” Collet, 20000rpm,157mm Length, 0.50kgSI-2006S 1/4” Right Angle Die Grinder 1/4” Collet, 20000rpm,157mm Length, 0.50kgSI-2011S 1/4” Medium Die Grinder 1/4” Collet, 22000rpm,170mm Length, 0.60kgCheck out ourAbrasives Cataloguefor our wide range ofPreparation products.1800 935 3781800 WELD QUIPSI-20121/4” Medium Die Grinder- Polymer Body Cover1/4” Collet, 22000rpm,170mm Length, 0.60kgSI-2022S 1/4” Extended Die Grinder 1/4” Collet, 22000rpm,326mm Length, 1.34kg AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS09. AIR DRILLSFan Grinders (Continued...)Air Drills• Key or keyless chuck• Many models availablePart No. Description SpecificationsPart No. Description SpecificationsSI-2015A1/4” Fan Grinder - PolymerBody Cover, Variable Speed1/4” Collet, 5500rpm, 217mmLength, 0.91kgSI-2023 1/4” Extended Fan Grinder 1/4” Collet, 6000rpm, 344mmLength, 1.70kgMini Grinders• Lightweight• Roll throttleSI-2015AD 10mm Straight Drill 6mm Drilling Capacity, 10mmChuck, Capacity 6000rpm,Polymer Body Cover, 231mmLength, 1.06kgSI-5100A 6mm Pistol Drill 10mm Keyed Chuck,5000rpm, 150mm Length0.90kgSI-5200A 13mm Heavy Duty Pistol Drill 13mm Keyed Chuck, 600rpm,185mm Length 1.42kgSI-5300A 10mm Heavy Duty Pistol Drill 10mm Keyed Chuck,2000rpm, 150mm Length0.91kgSI-5300AMK 10mm Heavy Duty Pistol Drill 10mm Metal Keyless Chuck,2000rpm, 190mm Length1.26 kgSI-5305A 10mm Reversible Pistol Drill 10mm Keyed Chuck,2000rpm, 150mm Length1.02kgSI-5305-8A 13mm Reversible Pistol Drill 13mm Chuck, 800rpm,185mm Length 1.45kgPart No. Description SpecificationsSI-2050AG Mini Angle Grinder 30mm Wheel, 20000rpm,115mm Length, 0.24kgSI-2051SG Pencil Grinder 1/8” Collet, 50000rpm,150mm Length, 0.194kgSI-5355 10mm Reversible Angle Drill 10mm Keyed Chuck,1200rpm, 202mm Length0.94kgSI-5500 10mm Pistol Drill 10mm Keyed Chuck,2600rpm, 160mm Length0.79kgSI-5500K 10mm Pistol Drill 10mm Plastic Keyless Chuck,2600rpm, 160mm Length0.85kgSI-5505 10mm Reversible Pistol Drill Light Weight Polymer Body,10mm Keyed Chuck08. air bevelersAir Bevelers• Stainless & mild steel beveling• Bevels upto 2mm in mild steel& 3mm in stainless• Adjustable beveling angle 15º-45º10. HOSE REELSHose Reels• The perfect solution for generalworkshop applicationsPart No.DescriptionAMB0307 Nitto Speed 14000rpm Angle 15º- 45ºPart No.AW815AW820AW1218AW1015AW1020AW1215DescriptionAir/Water 8mm x 15mtr hose 3/8 BSP FittingAir/Water 8mm x 20mtr hose 3/8 BSP FittngAir/Water Reel 12mm x 18mtr 1/2 BSP FittingAir/Reel 10mm x 15mtr 3/8 BSP FittingAir/Water 10mm x 20mtr 3/8 BSP FittingAir/Water 12mm x 15mtr 3/8 BSP Fitting

11. Impact DRIVERS/ 12. SCREWDRIVERS/ 13. Tyre inflators/14. blow guns & equipment/ 15. air riveters/16. air engraving pen & caulking gun/ 17. air TOOL LUBRICANT11. Impact DRIVERS13. Tyre inflatorsImpact Drivers• Top quality suitable for many jobs inthe workshopPart No. Description SpecificationsTyre Inflators• Straight clip on chuck• 50mm Dial gauge with rubberimpact protector• UV stabilised hose• Inflate/deflate controlSI-10511/4” Hex Dr Impact Driver- Straight Grip, Side Exhaust5mm Capacity, 162mmLength, 0.55kgSI-1060SI-1065SI-1356DSI-1365D1/4” Hex Dr Impact Driver- Straight Grip, Rear Exhaust1/4” Hex Dr Impact Driver- Pistol Grip, Handle Exhaust1/4” Hex Dr Impact Driver- Pistol Grip, Front Exhaust1/4” Hex Dr Impact Driver- Pistol Grip, Double HammerClutch, Muffled ExhaustSI-1370D 1/4” Hex Dr Impact Driver -Straight Grip, Double HammerClutch, Muffled Exhaust6mm Capacity, 208mmLength, 0.87kg6mm Capacity, 165mmLength, 0.98kg8mm Capacity, 142mmLength, 1.22kg8mm Capacity, 143mmLength, 1.32kg8mm Capacity, 227mmLength, 1.21kgPart No.Description02.0135 Dial Tyre Inflator 1/4” BSP, 50mm Dial, Clip On Chuck, SingleStraight, Length 350mm Light Trade02.0137 Dial Tyre Inflator 1/4” BSP, 50mm Dial, Clip On Chuck, SingleStraight, Length 1000mm Light Trade10.2000 1/4”BSP Sight Glass, Hold On Chuck, Dual Angle, Length500mm Industrial02.0100 1/4”BSP Reader Bar, Hold On Chuck, Dual Angle Length450mm Industrial / Tractor02.0150 1/4”BSP 50mm Dial, Clip On Chuck, single Straight Length400mm Industrial12. SCREWDRIVERS14. blow guns & equipmentScrewdrivers• Adjustable slip clutch• Reversible• Further information available on requestBlow Guns & Equipment• Brass insert in air inlet, brass valve• Stainless steel spring• Hanging facility• Controlled air flowPart No. Description SpecificationsSI-1130A 1/4” Hex Dr Screwdriver -Adjustable ClutchSI-1140 1/4” Hex Dr Screwdriver -Adjustable ClutchSI-1161 1/4” Hex Dr Screwdriver -Adjustable ClutchSI-1166A 1/4” Hex Dr Screwdriver -Adjustable ClutchSI-1166-8A 1/4” Hex Dr Screwdriver -Adjustable ClutchSI-5305AQC1/4” Hex Dr Screwdriver- Quick Change Chuck ForDriver Bits3mm Capacity, Push Start,2000rpm, 177mm Length,0.30kg4mm Capacity, Level Start,1700rpm, 203mm Length,0.62kg6mm Capacity, Level Start,1600rpm, 247mm Length,1.12kg6mm Capacity, 2000rpm,207mm Length, 1.12kg6mm Capacity, 800rpm,229mm Length, 1.35kg160mm Length, 1.07kgPart No.Description07.0770 Angled Tipped Extension Nozzle Blow Gun, Pistol Grip, 85mmStd Nozzle 1/4”BSP interchangeable07.0774 450mm Extended Nozzle Blow Gun, Pistol Grip, 1/4”BSP(f)interchangeable07.0766 900mm Extended Nozzle Blow Gun, Pistol Grip, 1/4”BSP(f)interchangeable04.0515 Palm Grip, Dart Nozzle 1/4” BSP(F)07.0600 Tipped Extension Nozzle Blow Gun, Palm Grip 150mm Std Nozzle1/4”BSP(f) interchangeable Nozzle07.0602 Angled Extension Nozzle Blow Gun, Palm Grip, AdjustableContour 1/4”BSP(f) Interchangeable Nozzle07.0609 450mm Extended Nozzle, Interchangeable Nozzle, Industrial07.0619 900mm Extended Nozzle, Interchangeable Nozzle, Industrial10 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS15. air rivetersAir Riveters• Air/hydraulicHire or buyoptionsavailablePart No.AL-3101Al-3102DescriptionStandard 3/16” Capacity Riveter – Air / Hydraulic, 4.8mm Cap.Trac. Pwr 720kg Inlet 1/4”NPT Weight 1.3kgHeavy Duty 1/4” Capacity Riveter – Air / Hydraulic, 3 piece Jaw,Universal Cylinder Joint Swivel, Forged Aluminium Alloy WearResistant Body, 6mm Cap. Trac Pwr 1100kg, Inlet 1/4”NTP,Length 287mm Weight 1.8kg16. air engraving pen & caulking gunAir Engraving Pen & Caulking Gun• Hardened stylus tipAsk us aboutour flexible leaseoptions.›For more information call1800 935 3781800 WELD QUIPPart No.AL-2480AL-2354DescriptionPrecision Engraving Pen, Hardened Stylus TipStandard Caulking Gun 50mm x 210mm Tube Inlet 1/4”NTPWeight 1.12kg, Length 275mm, 30-60psi17. air Tool Lubricant Check out ourAir Tool Lubricant• Reduces wear• Maintains performancePart No.ATL-250ATL-500ATL-1000ATL-5000Description250ml500ml1 Litre5 LitresWelding AccessoriesCataloguefor our wide range ofWelding tools.1800 935 3781800 WELD QUIP11

18. air compressor oil/ 19. Air Tool Cleaner/20. Pneumatic Name Plate Tacker/ 21. Wrenches/ 22. Panel Cutters/23. Trimmers/Routers/ 24. Sanders18. air Compressor Oil21. WrenchesAir Compressor Oil• For Small Piston CompressorsRatchet Wrenches• A versatile tool with manyautomotive and industrial usesPart No.ACO - 1000ACO - 5000Description1 Litre5 LitresPart No. Description SpecificationsSI-1107A1/4” Sq. Dr. Micro MiniRatchet Wrench - PolymerBody Cover6mm Capacity, 300rpm,125mm Long, 0.39kg19. air Tool CleanerSI-1108A3/8” Sq. Dr. Micro MiniRatchet Wrench - PolymerBody Cover10mm Capacity, 300rpm,125mm Long, 0.40kgAir Tool Cleaner• Flushes, Cleans, Lubricates• Restores PerformancePart No.ATC - 1000Description1 LitreSI-1200BSI-1205BSI-1207SI-1208SI-12511/4” Sq. Dr. Mini RatchetWrench3/8” Sq. Dr. Mini RatchetWrench1/4” Sq. Dr. Mini RatchetWrench - Polymer Body Cover3/8” Sq. Dr. Mini RatchetWrench - Polymer Body Cover1/4” Sq. Dr. Mini RatchetWrench - Polymer Body Cover6mm Capacity, 200rpm,168mm Long, 0.51kg10mm Capacity, 220rpm,167mm Long, 0.51kg6mm Capacity, 200rpm,170mm Long, 0.54kg10mm Capacity, 200rpm,170mm Long, 0.54kg6mm Capacity, 200rpm,158mm Long, 0.56kgATC - 50005 LitresSI-12523/8” Sq. Dr. Mini RatchetWrench - Polymer Body Cover10mm Capacity, 260rpm,168mm Long, 0.56kgSI-12611/4” Sq. Dr. Standard RatchetWrench - Polymer Body Cover10mm Capacity, 170rpm,259mm Long, 1.15kg20. pneumatic name plate tackerSI-12621/2” Sq. Dr. Standard RatchetWrench - Polymer Body Cover16mm Capacity, 170rpm,265mm Long, 1.16kgPneumatic Name Plate Tacker• Permanent fastening of metal platesto metal tackers• Fastens quickly• No drilling or surface preparationSI-1320SI-1325SI-1340BSI-1345BSI-14353/8” Sq. Dr. Standard RatchetWrench - Front Exhaust1/2” Sq. Dr. Standard RatchetWrench - Front Exhaust3/8” Sq. Dr. Standard RatchetWrench - Polymer Body Cover1/2” Sq. Dr. Standard RatchetWrench - Polymer Body Cover1/2” Sq. Dr. Large RatchetWrench - Front Exhaust,Heavy Duty12mm Capacity, 160rpm,265mm Long, 1.16kg16mm Capacity, 160rpm,265mm Long, 1.17kg12mm Capacity, 160rpm,265mm Long, 1.14kg16mm Capacity, 160rpm,263mm Long, 1.15kg14mm Capacity, 140rpm,367mm Long, 1.95kgPart No.Description221 AMTAK Pneumatic Name Plate TackerThrough Ratchet Wrench• Further information available onrequestPart No. Description SpecificationsSI-1288S17mm Hex. Dr. ThroughRatchet Wrench8-17mm Capacity, 180rpm,211mm Long, 0.54kgAlso available with 13-15mmHex. Dr. and with 1/2” Hex. Dr.SI-1288SK Through Ratchet Wrench Kit -inc. Metal Box with 4 Sockets8-14mm Socket Capacity,11mm 13mm 3/8” Sq. Dr.12 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS22. Panel cuttersImpact Wrenches• Straight and pistol grip• 3/8 to 1 inch drive• Top quality toolPanel Cutters• Safety lever throttle• Variable speed• Ideal for small cut off jobsPart No. Description SpecificationsPart No. Description SpecificationsSI-13053/8” Sq. Dr. Impact Wrench- Butterfly Throttle, Single DogClutch, Front ExhaustSI-1355 3/8” Sq. Dr. Impact Wrench -Pistol Grip, Single Dog Clutch,Front Exhaust10mm Capacity, 158mmLong, 0.94kg10mm Capacity, 142mmLong, 1.12kgSI-2033SI-475075mm Disc Cutter - uses ThinCutting DisksOscillating Cutter - fitted withDepth-of-Cut Gauge75 x 1.6 x 9.5CH Disc Size,1.2mm Capacity, 17000rpm,1/4”NPT, 196mm Length,1.00kg63mm ø Blade, 2, 4 or 6mmCutting Depths, 20,000spm,204mm Length, 0.94kgSI-13653/8” Sq. Dr. Impact Wrench- Pistol Grip, Twin Dog Clutch,Muffled Exhaust10mm Capacity, 134mmLong, 1.31kg23. TRIMMERs / ROUTERsSI-13703/8” Sq. Dr. Impact Wrench- Straight Grip, Twin DogClutch, Muffled Exhaust10mm Capacity, 219mmLong, 1.18kg, OptionalProtectorTrimmer / RouterSI-1420B 1/2” Sq. Dr. Impact Wrench -Pistol Grip, Single Dog Clutch,Front Exhaust16mm Capacity, 191mmLong, 2.60kg• Further information available onrequestSI-1422B1/2” Sq. Dr. Impact Wrench- 50mm Ext. Anvil, Single DogClutch, Front Exhaust16mm Capacity, 225mmLong, 2.69kgSI-1440TSI-1442T1/2” Sq. Dr. Impact Wrench- Pistol Grip, Twin HammerClutch, Handle Exhaust1/2” Sq. Dr. Impact Wrench- 50mm Ext. Anvil, TwinHammer Clutch, HandleExhaust18mm Capacity, 188mmLong, 2.12kg18mm Capacity, 240mmLong, 2.22kgPart No. Description SpecificationsSI-2018ALaminate Trimmer / Router- Fully Adjustable Guides1/4” Collet, 22000rpm,177mm Length, 0.916kgSI-1480 1/2” Sq. Dr. Impact Wrench -Pistol Grip, Pin Clutch, HandleExhaustSI-1482SI-1540TSI-1546TSI-1760TSI-1766T1/2” Sq. Dr. Impact Wrench- 50mm Ext. Anvil, Pin Clutch,Handle Exhaust3/4” Sq. Dr. Impact Wrench- Pistol Grip, Twin HammerClutch, Handle Exhaust3/4” Sq. Dr. Impact Wrench- 50mm Ext. Anvil, TwinHammer Clutch, HandleExhaust1” Sq. Dr. Impact Wrench- Pistol Grip, Twin HammerClutch, Handle Exhaust1” Sq. Dr. Impact Wrench- 50mm Ext. Anvil, TwinHammer Clutch, HandleExhaustSI-1770T 1” Sq. Dr. Impact Wrench -D-Handle, Twin HammerClutchSI-1776T 1” Sq. Dr. Impact Wrench -50mm Ext. Anvil, D-Handle,Twin Hammer Clutch18mm Capacity, 208mmLong, 2.37kg18mm Capacity, 236mmLong, 2.41kg20mm Capacity, 240mmLong, 3.40kg20mm Capacity, 388mmLong, 4.10kg38mm Capacity, 268mmLong, 8.13kg38mm Capacity, 430mmLong, 8.13kg38mm Capacity, 355mmLong, 8.44kg38mm Capacity, 530mmLong, 8.87kg24. SANDERSDisc Sanders• Further information available onrequestPart No. Description SpecificationsSI-2026SI-2201-RSI-2210SI-2210R125mm Angle Sander- 125mm Plastic BackingPad for Fibre Discs, VariableSpeed50mm Quick Change Sander- 50mm Rubber Backing Padfor EZ-LOK Discs, VariableSpeed100mm Pistol Sander- 100mm Fibre Discs, VariableSpeed75mm Quick Change Sander- 75mm Rubber Backing Padfor EZ-LOK Discs, VariableSpeed125 x 22CH, 5/8”-11 SpindleThread, 5000rpm, 285 x100mm Length x Height,1.50kg50mm ø Disc Size, 1/4”-20Spindle Thread, 17000rpm,144 x 96mm Length x Height,0.05kg100 x 22CH Disk Size, 7/16”-20 Spindle Thread, 18000rpm,123 x 167mm Length xHeight, 0.99kg75mm ø Disc Size, 18000rpm,1/4”NPT, 123 x 167mm Lengthx Height, 1.01kgSI-2300SI-2351180mm Verticle Sander- 178mm Plastic BackingPad for Fibre Discs, VariableSpeed180mm Angle Sander- 178mm Plastic Backing Padfor Fibre Discs178 x 22CH Disc Size, 5/8”-11Spindle Thread, 4000rpm, 187x 258mm Length x Height,2.27kg178 x 22CH Disc Size, 5/8”-11Spindle Thread, 4500rpm, 358x 100mm Length x Height,2.12kg13

24. Sanders (CONTINUED...)/ 25. Polishers/ 26. Air Hammers24. SANDERS (Continued...)Wet Sanders• Hollow spindle• Centre water feedGeared Sander• Powerful gear driven action• Very efficientPart No. Description SpecificationsSI-2322 WR-ESI- 2351WAngle Wet Sanders - HollowSpindle, Centre Water FeedAngle Wet Sanders - HollowSpindle, Centre Water FeedM14 x 2.0 Spindle Thread,5000rpm, 230 x 93mm Lengthx Height, 1.3kg5/8”-11 Spindle Thread,4500rpm, 358 x 100mmLength x Height, 2.47kgPart No. Description SpecificationsSI-3115-6M150mm Palm Grip GearedSander - Dust Free150mm ø Pad, Velcro PaperMount, 4500rpm, 4.4mm Orbitø, 1.2kgSI-2451WAngle Wet Sanders - HollowSpindle, Centre Water Feed5/8”-11 Spindle Thread,2300rpm, 358 x 100mmLength x Height, 2.48kgOrbital SandersRandom Orbital Sanders• Top quality tool designed formany automotive and industrialuses• Further information available onrequestPart No. Description SpecificationsSI-2107ASI-3100SI-3100VSI-3101-650mm Bar Handle Sander- Aluminium / Foam / VelcroPad, Variable Speed150mm Bar Handle Sander- Foam / Plastic Backing Pad,Variable Speed150mm Vacuum Sander- SI-31000 Fitted with VacuumTake Off Accessories150mm Palm Grip Sander- Light Weight Plastic Skirt,Variable Speed50mm ø Pad, 8500rpm, 3mmOrbital ø, 0.55kg150mm ø Pad, Velcro or PSAPaper Mount, 8000rpm, 7mmOrbital ø, 1.82kg150mm ø Pad, Velcro or PSAPaper Mount, 8000rpm, 7mmOrbital ø, 2.04kg150mm ø Pad, Velcro or PSAPaper Mount, 10 000rpm,5mm Orbit ø, 0.92kgSI-3102 75mm Mini Palm Grip Sander 75mm ø Pad, 5/16”-24Spindle Thread, Velcro PaperMount, 12 000rpm, 3mm Orbitø, 0.54kgSI-3103-6SI-3105-6150mm Palm Grip Sander- Heavy Duty Metal Skirt,Variable Speed150mm Bar Handle Sander- Heavy Duty Model, VariableSpeed150mm ø Pad, Velcro or PSAPaper Mount, 8200rpm, 5mmOrbit ø, 1.20kg150mm ø Pad, Velcro or PSAPaper Mount, 9000rpm, 6mmOrbit ø, 1.67kgPart No. Description SpecificationsSI-3001SI-3003SI-3005SI-3007SI-3011SI-3013SI-3018Mini Orbital Palm Grip Sander- Light Weight Plastic Skirt,Variable SpeedMini Orbital Palm Grip Sander- Heavy Duty Metal Skirt,Variable Speed1/3 Sheet Orbital Sander - BarHandle, Variable Speed1/3 Sheet Orbital Sander- Palm Grip, Variable SpeedSelf Vac Mini Sander - PalmGrip, Light Weight PlasticSkirt, Self Vacuum System,Variable SpeedOscillating SandersSelf Vac Mini Sander - PalmGrip, Heavy Duty Metal Skirt,Self Vacuum System, VariableSpeed1/3 Sheet Self Vac Sander- Bar Handle, Variable Speed,Heavy Duty75 x 100mm Pad, Velcro orPSA Paper Mount, 7000rpm,4mm Orbit ø, 1.15kg75 x 100mm Pad, Velcro orPSA Paper Mount, 8000rpm,4mm Orbit ø, 1.049kg90 x 165mm Pad, PaperClips Paper Mount, 8000rpm,4.8mm Orbit ø, 1.872kg95 x 175mm Pad, PaperClips Paper Mount, 7500rpm,4.8mm Orbit ø, 1.2kg75 x 100mm Pad, Velcro orPSA Paper Mount, 9000rpm,4mm Orbit ø, 1.15kg75 x 100mm Pad, Velcro orPSA Paper Mount, 7000rpm,4mm Orbit ø, 1.46kg95 x 175mm Pad, Velcro orPSA paper Mount, 7000rpm,4.8mm Orbit ø, 2.31kgSI-3111-6Self Vac Palm Grip Sander- Light Weight Plastic Skirt,Self Vacuum System, VariableSpeed150mm ø Pad, Velcro or PSAPaper Mount, 9500rpm, 5mmOrbit ø, 1.27kgSI-3113-6SI-3118-6Self Vac Palm Grip Sander- Heavy Duty Metal Skirt, SelfVacuum System, VariableSpeedSelf Vac Bar Handle Sander- Heavy Duty, Self VacuumSystem, Variable Speed150mm ø Pad, Velcro or PSAPaper Mount, 8000rpm, 5mmOrbit ø, 1.59kg150mm ø Pad, Velcro or PSAPaper Mount, 9500rpm, 6mmOrbit ø, 2.15kgPart No. Description SpecificationsSI-3200AS Triangle Pad Sander -Oscillating Pad Sander,Variable Speed70 x 75 x 75mm Pad, VelcroPaper Mount, 19 000spm,182mm Length, 0.65kgSI-3300 30mm Oscillating Sander 30mm ø Pad, M6 x 1 SpindleThread, 600rpm, 1/4” NPT,169 x 38mm Length x Height,0.57kg14 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS25. PolishersBelt SandersPolishers• Further information available onrequestPart No. Description SpecificationsSI-270010mm Belt Sander - SpeedController Optional10 x 330mm Belt, 1100m/minBelt Speed, 1/4”NPT, 282mmLength, 0.822kgSI-2760 60mm Belt / Drum Sander 60 x 260mm Belt Size, 800m/min Belt Speed, 1/4”NPT,218mm Length, 1.200kgSI-2800SI-3200AS20mm Belt Sander - SpeedController Optional30mm Belt Sander - SpeedController Optional20 x 520mm Belt Size, 2500m/min Belt Speed, 1/4”NPT,357mm Length, 1.43kg30 x 540mm Belt Size, 1900m/min Belt Speed, 1/4”NPT,368mm Length, 2.015kgPart No. Description SpecificationsSI-2221SI-2400SI-2405SI-245170mm Vertical Polisher - takes70mm Velcro LambswoolBuff, Variable Speed180mm Vetical Polisher- takes 180mm LambswoolBuff, Variable Speed150mm Vertical Polisher- takes 150mm VelcroLambswool Buff180mm Angle Polisher - takes180mm Lambswool Buff70mm ø Pad, 4500rpm,147mm Height, 0.64kg180mm ø Pad, 5/8”-11Spindle Thread, 2000rpm,1/4”NPT, 260 x 187mm Lengthx Height, 2.246kg150mm ø Pad, 5/8”-11Spindle Thread, 1800rpm,1/4”NPT, 190 x 147mm Lengthx Height, 1.17kg180mm ø Pad, 5/8”-11Spindle Thread, 2300rpm,1/4”NPT, 358 x 100mm Lengthx Height, 2.13kgSI-2451LP100mm Linear Polisher - takes100 x 100 x 19mm CHAbrasive Wheels100 x 100 x 19CH WheelSize, 2300rpm, 1/4”NPT, 340x 195mm Length x Width,4.78kgDo you havethe rightsafety gear?SI-3100P26. AIR HAMMERSAir Hammer• Medium stroke150mm Random OrbitalApplicatior / Polisher - 40mmThick Velcro Sponge Pad,Variable Speed150mm ø Pad, 165mm Buff,8000rpm, 6mm Orbit ø,1.81kgPlease be sure tofollow individualmanufacturerssafety instructions.For more information call1800 935 378 ?1800 WELD QUIP• Variable powerPart No. Description SpecificationsSI-4120A Medium Stroke Hammer -20mm Stroke, Variable Power10.2mm ø Shank, 2600Blows/min, 1/4”NPT, 208mmLength, 1.60kg15

27. Shears/ 28. Nibblers/ 29. Needle scalers/30. Punch/Flange tools/ 31. SAWS/ 32. Sealer Cutters/ 33. Accessories/27. SHEARS29. Needle ScalersShears• Straight and gentle curve cutting ofsheet metalNeedle Scaler• Heavy duty sealer• Inline configuration for use inawkward locations• Ideal for removal of paint and rustPart No. Description SpecificationsSI-45Double Cut Shear Head Only- Fits SI-5500 Drill1.6mm Mild Steel Capacity,200mm Min. RadiusSI-4500 Double Cut Sheet Metal Shear 1.6mm Mild Steel Capacity2600spm Blade Speed,200mm Min,Radius, 1/4”NPT,1.26kgPart No. Description SpecificationsSI-4150 Heavy Duty Needle Scaler 12 x 3mm ø Needle Capacity,3500 Blows/Min, 1/4”NPT,333mm Length, 2.06kgSI-5300FCSI-5300SSHeavy Duty Fibre CementShear - Forged BladeHousingHeavy Duty Scissors Shear- Fixed Bottom Blade to RunAlong Bench, Forged BladeHousing1/2” Fibre Cement SheetCapacity, 2000spm BladeSpeed, 40mm Min. Radius,1/4” NPT, 1.46kgFoil, Plastic, Netting, 2000spmBlade Speed, 40mm Min.Radius, 1/4”NPT, 1.46kg30. Punch / Flange ToolsPunch / Flange ToolSI-5300PSHeavy Duty Double Cut Shear- Forged Blade1.9mm Mild Steel Capacity,2000spm Blade Speed,200mm Min. Radius, 1/4”NPT,1.82kgSI-5500ESingle Blade Sheet MetalShear1.6mm Mild Steel Capacity,2600spm Blade Speed,40mm Min. Radius, 1/4”NPT,1.38kgPart No. Description SpecificationsSI-4800Air / Hydraulic SheetmetalPunch / Flange Tool5 ø x 1.2mm PunchingCapacity, 22 x 12 x 1.2mmFlanging Capacity, 1/4”NPT,228mm Length, 1.01kg28. NibblerSNibbler31. Saws• For use with sheet metal to 1.6mmcapacitySawPart No. Description SpecificationsSI-4600 Sheet Metal Nibbler 1.6mm Mild Steel Capacity,2500spm Stroke Speed,4.5mm Min. Radius, 1/4”NPT,1.0kgPart No. Description SpecificationsSI-4700BReciprocating Saw - SawsAvailable with 14, 18, 24 or 32Teeth Per Inch1.6mm Mild Steel CuttingCapacity, 10 000spm, 10mmStroke, 1/4”NPT, 0.58kgSI-4710SI-4730Reciprocating Saw/File- Takes Minature Flat, Roundor Triangular Files As Well AsSaw BladesReciprocating Saw/File - AirMotor Driven for SmoothOperation1.6mm Mild Steel Capacity, 10000spm, 10mm Stroke, 5mmø File Opening, 0.80kg1.6mm Mild Steel CuttingCapacity, 5mm ø File ShankOpening, 6 000spm, 8mmStroke, 256mm Length,0.92kg16 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS32. Sealer CuttersSealant CutterBacking Pads Etc• Oscillating action• Variable speedPart No. Description SpecificationsSI-3200AKSealant Knife - OscillatingAction, Variable Speed57mm Offset Std. Blade,19 000spm, 1/4” NPT, 250mmInc. Blade Length, 0.670kgPart No. Description Specifications33. ACCESSORIESDrill Chucks60726 150mm Sanding Pads - VinylFace60796 150mm Sanding Pads - VelcroFaceL205, L305, EM4,D42EZ-LOC Back-up Pads &AdaptorsSurface Conditioning Discs• Suits Roloc Tyre Backing PadFibre Glass Backing, RivitedShaft PlateFibre Glass Backing, RivitedShaft PlateAvailable in 1”, 2”, 3”, 4” øPart No.DescriptionPart No. Description SpecificationsRC3838L Light Duty Metal Keyed Chuck 1-10mm Capacity , 3/8”,24 MountRC3838HHeavy Duty Metal KeyedChuck1-10mm Capacity , 3/8”,24 MountRC1238 Light Duty Metal Keyed Chuck 1-13mm Capacity, 3/8”,24 Mount2” Blue Fine2” Maroon Medium2” Brown Course3” Blue Fine3” Maroon Medium3” Brown CoarseKL3838 Plastic Keyless Chuck 1-10mm Capacity, 3/8”,24 MountKL1238 Plastic Keyless Chuck 1-12mm Capacity, 3/8”,24 MountAbrasive Discs• Suits Roloc Tyre Backing PadPorta - All Metal Keyless ChucksPart No.Description2” 24, 36, 60, 80 & 120 Grit3” 24, 36, 60, 80 & 120 GritPart No. Description SpecificationsSurface Conditioning KitsKP1438MKP3838MKP1238MHeavy Duty Metal KeylessChuckHeavy Duty Metal KeylessChuckHeavy Duty Metal KeylessChuck0-6mm Capacity, 3/8”, 24Mount0-10mm Capacity, 3/8”, 24Mount0-12mm Capacity, 3/8”, 24MountPart No. Description SpecificationsAL205DK 2” Surface Conditioning Kit Suits Roloc Tyre BackingPad, 1 x Rubber Roloc TypeBacking Pad, 1 x 1/4” ShankMandril, 2 x 2” Blue Fine Disc,1 x 2” Brown Coarse DiscAL305DK3” kit Also Available17

33. Accessories (CONTINUED...)/ 34. Air Compressors/01. Power tools – angle grinders/ 02. Power Tools – METAL CUT OFF SAWS/03. Power tools – DRILLS – POWER / 04. Power Tools – DRILLS – Cordless33. ACCESSORIES (Continued...)KK Chisels• Air Hammer Chisels• 10.2mm Round Shank75mm Cut-Off Discs• Used with panel cutterPart No.Description801 Tie Rod Tool802 Tail Pipe Cutter803JFork804 Bushing RemoverPart No. Description Specifications760908 To Suit SI-2033 0.75 x 1.2 x 9.35CH805 Bent Scraper806 Bushing Splitter807 Sheet Metal Cutter808 Muffler Cutter809 Panel Cutter810 Flat811 Long Flat812 Taper Punch34. air compressorsAir Compressors• Full range fo Compressors available• Please refer to the New Machines Catalogue813 Rivet Cutter814 Blank815 Spot Weld Breaker816 Sheet Metal Cutter817 Bushing Driver818 Flat Bend819 Sheet Metal Punch820 Panel Crimper821 Smoothing Hammer822 Straight Punch823 Paint Scraper824 Shock Absorber825 Moil PointPC-1Pittsburge AttachmentAbrasive Belts• 10mm, 20mm & 30mm WideBeltsPart No.10mm x 330mm20mm x 520mm30mm x 540mmDescription40, 60, 80 & 120 Grit40, 60, 80 & 120 Grit40, 60, 80 & 120 GritCall us for moreinformation on our widerange ofUsed Machines1800 935 3781800 WELD QUIP18 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLS01. power tools – angle grinders03. power tools – Drills – PowerBosch/Hitachi/Makita• Full range of industrial grindersavailable• Further information available onrequestBosch/Hitachi/Makita• Designed to suit many drillingapplications• Further information availableon requestPart No.BoschPart No.BoschGWS6-100Angle Grinder 100mmGSB13REKLCImpact Drill 13mm 600 wattGWS8-115Angle Grinder 115mmGSB16REKLCImpact Drill 16mm 701 wattGWS10-125Angle Grinder 125mmGSB20-2RETImpact Drill 20mm 1010 wattGWS26-180BGWS20-230Angle Grinder 180mmAngle Grinder 230mmPart No.D13VFHitachiVariable Speed 13mm 710 wattPart No.HitachiDV16VImpact Drill 16mm 590 wattG10SR3Angle Grinder 100mm 730 wattG12SR3G13SB3G18SB3Angle Grinder 115mmAngle Grinder 125mmAngle Grinder 180mmPart No.Makita6413 Variable Speed 13mm 650 wattHP1621KSP Hammer Drill 13mm 650 wattHR1830Hammer Drill Rotary 18mm 440 wattPart No.Makita9556NBKAngle Grinder 100mm 840 watt9557NBAngle Grinder 115mm 840 watt9555NBKGA7040501GA9020Angle Grinder 125mm 710 wattAngle Grinder 180mmAngle Grinder 230mm04. power tools – Drills – CordlessBosch/Hitachi/Makita02. power tools – METAL CUT OFF SAWSBosch/Hitachi/Makita• Extremely compact & light weight• Lithium Ion battery• More power & longer life than NIMH• Further information available on request• Superior performance with metal• Complete with enclosed wheel guard• easy transportation• Further information available on requestPart No.GSR14.4VLIGSR18V.LIDescription - BoschCordless Driver Drill 14.4V Lithium IonCordless Driver Drill 18V Lithium IonPart No.DS12DVB2Description - HitachiCordless Driver Drill 13mm 12VPart No.BoschGCO2000Cut Off Saw 355mm 2000 wattPart No.Description - MakitaPart No.HitachiBDF441RFECordless Driver Drill 14.4V Lithium IonCC16SACut Off Saw 406mm 2400 wattBDF452SHECordless Driver Drill 18V Lithium IonPart No.MakitaBHP452SHECordless Hammer Drill 18V Lithium Ion2414NB-2Cut Off Saw 355mm 2400 watt24165 Cut Off Saw 406mm 1430 watt19

05. Power tools – GRINDERS – straight/die/ 06. Power Tools – siastar ® kit05. power tools – Grinders – Straight / DieBosch/Hitachi/Makita• Straight grinder, ideal forgrinding, sanding & metalpolishing applications• Further information availableon requestSiastar ® Kit (Continued...)ProductDescriptionBelt Siastar® Grit range coarse, medium, fine Dia 25 x 660mm (1 x 26”)Quantity 1 off eachBeltwheel Siastar®Cut Siastar®Quantity 1 offDia 125mm (5”) Quantity 1 offFibre Siastar® Grit range K40, 60, 80, 120 Dia 125mm (5”)Quantity 1 off eachFibrepad Siastar®Dia 125mm (5”) Quantity 1 offDia 115mm (4 1/2”) Quantity 1 offPart No.GGS27GGS27CGGS65BoschDie Grinder 500 watt 27000 rpmDie Grinder Variable Speed 12000, 27000 600 wattStraight Grinder 125mm 6800rpmSiastar® SafetyGogglesSiastar® AngleGrinderQuantity 1 offOptionalPart No.HitachiGP2Die Grinder 25mm 520 watt 25000rpmGP13Straight Grinder 125mm 700 watt 4800rpmPart No.Siastar® KitPart No.GD0600MakitaDie Grinder 400 watt 25000rpmT6314Can be supplied with orwithout angle grinderGD0800CDie Grinder High Speed Variable 750 watt 7000-28000rpm9105 Straight Grinder 125mm 750 watt 4800rpm06. power tools – SIASTAR ® KITSiastar ® Kit• The entire siasta® system in a boxalways at your finger tips• Can be enhansed for specificrequirements• Handy and practical when you’re onthe move• Optimum protection of machine andtoolsFlap Siastar ®• Faster tool change• Robot compatible• Very high removal rate• Very long lifetime• Cool cut for use on INOXPart No.DescriptionT6317.0040.2 Grit range K040, Dia 115mm (4 1/2”)T6317.0060.2 Grit range K060, Dia 115mm (4 1/2”)T6317.0080.2 Grit range K080, Dia 115mm (4 1/2”)T6318.0040.2 Grit range K040, Dia 125mm (5”)T6318.0060.2 Grit range K060, Dia 125mm (5”)ProductDescriptionT6318.0080.2 Grit range K080, Dia 125mm (5”)Siastar® modelFlap Siastar®Form Siastar®Dim M14 or 5/8” Quantity 1 offGrit range K40, 60, 80 Dia 125mm (5”) Quantity 1 off eachGrit range K50, 80, 180, 400 Dia 75mm (5” R 5/32”) R4Quantity 1 off eachVlies Siastar® Grit range medium S, fine A Dia 115mm R4 (4 1/2”)Quantity 1 off eachStrip Siastar®Dia 115mm R4 (4 1/2”) Quantity 1 offWing Siastar® Grit range K80, coarse, medium Dia 30mm (1 3/16”)Quantity 3 off eachGrit range K80, coarse, medium Dia 50mm (2”)Quantity 3 off eachGrit range K80, coarse, medium Dia 70mm (2 3/4”)Quantity 3 off eachForm Siastar ®• Faster tool change• Robot compatible• High removal rate• Universal use• Cool cut with highly active additivesfor use on INOX• Design based on radiiShaft Siastar®Quantity 1 off20 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

AIR & POWER TOOLSForm Siastar ® (Continued...)Part No.DescriptionT6319.0050.3 Grit range K050, Radius R4 mm (R 5/32”) Dia 75mm (3”)T6319.0080.3 Grit range K080, Radius R4 mm (R 5/32”) Dia 75mm (3”)T6319.0180.3 Grit range K180, Radius R4 mm (R 5/32”) Dia 75mm (3”)T6319.0400.3 Grit range K400, Radius R4 mm (R 5/32”) Dia 75mm (3”)T6320.0050.2 Grit range K050, Radius R2 mm (R 5/64”) Dia 115mm (4 1/2”)T6320.0080.2 Grit range K080, Radius R2 mm (R 5/64”) Dia 115mm (4 1/2”)T6320.0180.2 Grit range K180, Radius R2 mm (R 5/64”) Dia 115mm (4 1/2”)T6320.0400.2 Grit range K400, Radius R2 mm (R 5/64”) Dia 115mm (4 1/2”)T6321.0050.2 Grit range K050, Radius R4 mm (R 5/32”) Dia 115mm (4 1/2”)T6321.0080.2 Grit range K080, Radius R4 mm (R 5/32”) Dia 115mm (4 1/2”)T6321.0180.2 Grit range K180, Radius R4 mm (R 5/32”) Dia 115mm (4 1/2”)T6321.0400.2 Grit range K400, Radius R4 mm (R 5/32”) Dia 115mm (4 1/2”)T6322.0050.2 Grit range K050, Radius R2 mm (R 5/64”) Dia 125mm (5”)T6322.0080.2 Grit range K080, Radius R2 mm (R 5/64”) Dia 125mm (5”)Check out ourNew Machines Cataloguefor our newTIG Brush.1800 935 3781800 WELD QUIP“If you can weld it,TIG Brush® canclean it!”T6322.0180.2 Grit range K180, Radius R2 mm (R 5/64”) Dia 125mm (5”)T6322.0400.2 Grit range K400, Radius R2 mm (R 5/64”) Dia 125mm (5”)T6323.0050.2 Grit range K050, Radius R4 mm (R 5/32”) Dia 125mm (5”)T6323.0080.2 Grit range K080, Radius R4 mm (R 5/32”) Dia 125mm (5”)T6323.0180.2 Grit range K180, Radius R4 mm (R 5/32”) Dia 125mm (5”)T6323.0400.2 Grit range K400, Radius R4 mm (R 5/32”) Dia 125mm (5”)Call us for allyour serviceand repairs✓✓✓✓ServiceDepartmentOn-siteServiceTest & Tag24hr ResponseTimeVlies Siastar ®• Faster tool change• Robot-compatible• Low clogging• No lubrication on INOX• No change to work piece geometry• Very flexiblePart No.DescriptionT6324.4721.8 Grit range Medium S, Dia 115mm (4 1/2”)T6330.5911.8 Grit range SD fine A, Dia 115mm (4 1/2”)Strip Siastar ®• Faster tool change• Robot-compatible• Very long lifetime• Low clogging• No lubrication on INOX• No change to work piece geometryFor moreinformation call1800 935 3781800 WELD QUIPPart No.DescriptionT6325.1924.8 Dia 115mm (4 1/2”)Part No.Fibrepad Siastar® accessoriesT6366.0000.1 Dia 115mm (4 1/2”)T6366.0001.1 Dia 125mm (5”)21

06. Power tools – SIASTAR ® KIT (Continued...)06. power tools – SIASTAR ® KIT (Continued...)Cut Siastar ®• Faster tool change• Robot-compatible• Cool cut for use on INOX• High lateral stability• Clean cutting with little burrformation• Minimum material wastagePart No.Fibre Siastar ®• Faster tool change• Robot-compatible• Very high removal rate• Very long lifetimeDescriptionT6359.0000.2 Thickness 1.0mm (3/64”) Dia 115mm (4 1/2”)T6361.0000.2 Thickness 1.6mm (1/16”) Dia 115mm (4 1/2”)T6360.0000.2 Thickness 1.0mm (3/64”) Dia 125mm (5”)T6362.0000.2 Thickness 1.6mm (1/16”) Dia 125mm (5”)• Cool cut with highly active additivesfor use on INOXPart No.T6358.2921.2T6358.4921.2T6358.5921.2Part No.DescriptionGrit range coarse Dim 25 x 660mm (1 x 26”) Series 6230 scmHyperflexGrit range medium Dim 25 x 660mm (1 x 26”) Series 6230 scmHyperflexGrit range fine Dim 25 x 660mm (1 x 26”) Series 6230 scmHyperflexBeltwheel Siastar®accessoriesT6365.0000.1 Dia 65mm (2 3/5”)width 25mm (1”)Wing Siastar ®• Faster tool change• Simple handling• Robot-compatible• Low clogging• Universal use• Cool cut for use on INOXPart No.T6346.0080.6DescriptionGrit range K080 Dia 30mm (1 3/16”) Series 2813 siacutPart No.DescriptionT6363.0040.6 Grit range K40 Dia 115mm (4 1/2”)T6363.0060.6 Grit range K60 Dia 115mm (4 1/2”)T6363.0080.6 Grit range K80 Dia 115mm (4 1/2”)T6363.0120.6 Grit range K120 Dia 115mm (4 1/2”)T6364.0040.6 Grit range K40 Dia 125mm (5”)T6364.0060.6 Grit range K60 Dia 125mm (5”)T6364.0080.6 Grit range K80 Dia 125mm (5”)T6364.0120.6 Grit range K120 Dia 125mm (5”)T6349.2922.6T6349.4922.6T6347.0080.5T6350.2922.5T6350.4922.5T6348.0080.5T6351.2922.5T6351.4922.5Grit range coarse Dia 30mm (1 3/16”) Series 6250 scmGrit range medium Dia 30mm (1 3/16”) Series 6250 scmGrit range K080 Dia 50mm (2”) Series 2813 siacutGrit range coarse Dia 50mm (2”) Series 6250 scmGrit range medium Dia 50mm (2”) Series 6250 scmGrit range K080 Dia 70mm (2 3/4”) Series 2813 siacutGrit range coarse Dia 70mm (2 3/4”) Series 6250 siacutGrit range medium Dia 70mm (2 3/4”) Series 6250 siacutPart No.Fibrepad Siastar® accessoriesT6366.0000.1 Dia 115mm (4 1/2”)Part No.Shaft Siastar® accessoriesT6355.0000.1 Length 150mm (6”)T6366.0001.1 Dia 125mm (5”)Belt Siastar ®• Faster tool change• Simple handling• Low clogging• Cool cut for use on INOX• Reclosable belt joint• Optimum adaption to work piece• The centrepiece of Siastar® is the quick release adapter whichfits any conventional angle and straight grinders.• The wide range of abrasives turns your grinder into amultifunctional all-rounder. Tool changes are a breeze and can becarried out in a matter of seconds without additional keys.• Siastar® is indispensable to all users!Most power tools and brandsavailable upon request22 AIR & POWER TOOLS CALL 1800 935 378 TO ORDER

Ask us about our complete range ofengineering supply cataloguesCall 1800 935 378 to order©Weld-Quip Supply Co. 2009. All rights reserved.The entire contents of this catalogue are copyright. Photocopying, scanning, duplications, or copying of the pictures or information (except as permitted under the Copyright Act) is a breachof copyright and may result in legal action. No part of this catalogue may be stored electronically in any form without specific written permission from Weld-Quip Supply Co. Weld-QuipSupply Co. acknowledge the permission given by their suppliers and others in the use of trademarks and images. Non-genuine parts may be advertised with reference to the originalmanufacturer’s trade name and/or part number for identification purposes only. All trademarks and trade names are the property of their respective owners.All work practice recommendations, test results, suitability for use and productivity claims made in this catalogue are indicative only. All products are supplied subject to Weld-Quipsterms and conditions of sale which are available on request. Dimensions are subject to verification. General information E&OE. Weld-Quip Supply Co. reserve the right to modify designs,specifications, colours, models and part numbers or withdraw products without notice. All prospective purchases and users should conduct their own tests to determine the suitability ofproducts to actual job conditions. Whilst every effort will be made to ensure supply, some goods may not be available in all areas.

WELD QUIP SUPPLY CO.Engineering Supply Specialists2 Hollylea Road Leumeah,NSW 25601800 935 378