Profibus Class 2 - TR Electronic

Absolute-Encoder CE-58-M PROFIBUS (PNO)VIA BUSiELECTRONIC GmbHEglishalde 6D-78647 TrossingenTel. +49 - (0) 74 25 / 228 - 0Fax +49 - (0) 74 25 / 228 - 33http://www.tr-electronic.deGermanySmall and CompactType: Multi-Turn, Solid ShaftPROFIBUS-DP Interface.Fast Signal ProcessingParametrizable via PROFIBUS,.according to PNO-Profile CLASS2Standard Interchangeable Mounting Flanges5Electrical DataEncoder Capacity......................................................max. 28 Bit* Steps / Revolution ..................................................8192 Steps / Revolution* Number of Revolutions ...........................................max. 32768 RevolutionsSupply Voltage..........................................................11-27 V DC* Output Code ...........................................................Binary, Gray, shifted GrayData Transmission ....................................................PROFIBUS-DP Protocol according to DIN E 19 245 Part 3Standard Baud Rate..................................................9.6 kbps to 12 MbpsStation Address.........................................................3 - 99 adjustable via BCD switchesConfigurations* PNO Class 1...........................................16 or 32 Bit Position Data with Switchover of the Counting Direction* PNO Class 2...........................................16 or 32 Bit Position Data with Scaling Function etc.* TR-Mode Position...................................32 Bit Position Data with Gear Function etc.* TR-Mode Position + Velocity ..................32 Bit Position Data with Gear Function and Velocity Output* Parameterizable ParameterEnvironmental DataElectromagnetic compatibility (EMC) ........................EN 61000-4-2 (IEC-801-2) / EN 61000-4-4 (IEC-801-4)Operating Temperature.............................................0 to 60°CStorage Temperature ................................................-30 to +80°CRelative Humidity ......................................................98 % (non condensing)* Protection Class .....................................................IP 67 (DIN 40 050)* Valid for the encoder with screwed-together cable glands.10/03 Revision 00 CE-58-M PROFIBUS Solid Shaft.DOC5 - 1Changes reserved

ELECTRONIC GmbHEglishalde 6D-78647 TrossingenTel. +49 - (0) 74 25 / 228 - 0Fax +49 - (0) 74 25 / 228 - 33http://www.tr-electronic.deGermanyAbsolute-Encoder CE-58-M PROFIBUS (PNO)Mechanical DataMaximum Rotational Speed ............................................................... 12.000 min -1Maximum Load on Shaft .................................................................... 10 N axial, 20 N radial (at end of shaft)Lifetime on Bearings........................................................................... min. 3,9 x 10 10 revolutions at:- Operational Speed ........................................................... 6.000 min -1- Operating Temperature .................................................... 60°CWeight ................................................................................................ approx. 0,5 kgMaximum Angular Acceleration.......................................................... ≤ 10 4 rad/s 2Momentum of Inertia .......................................................................... approx. 2,5 x 10 -6 kg m 2Startup Momentum at 20°C (68°F)..................................................... approx. 2 NcmVibration (Sine, 59-2000 Hz) according to DIN IEC 68-2-6................ ≤ 100 m/s 2 (10g)Shock (Half-Sine, 11ms) according to DIN IEC 68-2-27 .................... ≤ 1000 m/s 2 (100g)Connection ......................................................................................... Screw terminals, 3 x cable glands radialDimensional Drawing∼93xM3, 3tief /DeepTK∅ 48 ± 0.2, (3x120°)Kabelverschraubung, 2xSW 20, 1xSW14Cable Gland, 2xSW 20, 1xSW145 - 2CE-58-M PROFIBUS Solid Shaft.DOC 10/03 Revision 00Changes reserved