& SAVE $100 OR MORE! - Deep Offshore Technology International

WEDNESDAY OCTOBER 23, 2013TRACK 1 – FIELD ARCHITECTURE & DEVELOPMENT CONCEPTS, FLOATING PRODUCTION SYSTEMS, TECHNOLOGY DEVELOPMENT INITIATIVES,ADVANCED MATERIALS, DEEPWATER TRENDS & CHALLENGES, CONSTRUCTION & INSTALLATION2:30 PM - 4:00 PM Session 4: Advanced MaterialsChair – Dr. Jane Zhang, Shell International E&PCo-chair – Mr. Jan van der Graaf, Heerema Marine Contractors2:30 PM – 3:00 PM: HISC Susceptibility of Super and Hyper Duplex Stainless Steel Umbilical Tubes; Engr. Filipe Salvio, Subsea 7 / COPPE-UFRJ3:00 PM – 3:30 PM: Lightweight Riser Experience – Opportunities to Overcome Ultra-Deep Water Challenges; Dr. Mikhail Gelfgat, Weatherford3:30 PM – 4:00 PM: Pushing the Limit of Subsea Insulation; Mr. Doug Marti, Trelleborg Offshore NorwayAlternate: Application of High Energy Density Fusion Cladding Processing for High-Pressure Rigid Pipe; Mr. Andrew Sherman, MesoCoat Inc.TRACK 2 - FLOWLINES & PIPELINES, RISERS & RISER TECHNOLOGY, SUBSEA TECHNOLOGY, SUBSEA BOOSTING & PROCESSING, FLOWASSURANCE2:30 PM – 4:00 PM Session 4: Subsea Boosting & ProcessingChair – Mr. Frederic Garnaud, TOTALCo-chair – Mr. David Morgan, Cameron2:30 PM – 3:00 PM: An Evolving Subsea Boosting Environment - Review of Current and Future Development; Mr. Phillip Luce, Framo Engineering3:00 PM – 3:30 PM: Subsea Separation – Enabling Deepwater Deployments with Compact Technology; Mr. Mika Tienhaara, ASCOM Separation3:30 PM – 4:00 PM: Condition Monitoring and Intervention Prediction for Subsea Rotating Equipment; Mr. Klas Eriksson, Aker SolutionsAlternate: SPRINGS - Subsea Seawater Treatment - Tool for Membrane Fouling Deepwater Tests; Mr. Stephane Anres, SaipemTRACK 3 - WELL CONSTRUCTION & DRILLING OPERATIONS, ASSET INTEGRITY, MOORING & STATION-KEEPING, RISK & RELIABILITY, SAFETY &ENVIRONMENTAL MANAGEMENT SYSTEMS2:30 PM – 4:00 PM Session 4: Risk & ReliabilityChair – Mr. Josh Billings, Repsol E&P USACo-chair – Dr. Ian Frazer, GL Noble Denton2:30 PM – 3:00 PM: Pull or No-pull; Risk-based Decision Support for Sub-sea Blow-Out Preventers (BOP); Mr. Scotty Roper, Lloyd’s Register Energy - Drilling3:00 PM – 3:30 PM: Simulations (Wet SITs) - Risk Reduction for Sea Trials: When There is One Chance to Safely do it Right; Mr. Trey Hall, Rothe3:30 PM – 4:00 PM: Gulf of Mexico Ultra Deepwater Drilling Risk Management; Dr. Venkat Dasari, Los Alamos National LaboratoryAlternate: Risk Mitigation Through Virtual Simulation: Take the Training to the Crew - Not the Crew to Training; Mr. Troy Kehoe, Check-612 DEEP OFFSHORE TECHNOLOGY 2013 | PRELIMINARY EVENT GUIDE