Table 2. ACCESSORIESDESCRIPTIONOVERALLDIMENSIONSW x H x Linches (mm)WEIGHTlb (kg)TRAY HEIGHTCLEARANCEinches (mm)LOAD CAPACITYAPPLICATIONTwo-LevelInstrument Rack(MB00-0015)22-3/4 x 12-3/4 x 23-1/4(577 x 323 x 590)20(9.0)9.0(228)3-3/4(95)UPPER LEVEL:2 full size trays10-1/2 x 20-1/2 x 3.0(267 x 521 x 76)or1 oversize tray22-1/2 x 22-1/2 x 4.0(572 x 572 x 102)orMicrosurgery TraysLOWER LEVEL:2 full size trays10-1/2 x 20-1/2 x 3.0(267 x 521 x 76)or1 instrument tray withcover12-1/2 x 20-1/2 x 2.0(318 x 520 x 50)For holding loaded instrumenttrays, or miscellaneooushard goodsindividually or in baskettypetrays.For holding loaded instrumenttrays, or miscellaneoushard goodsindividually or in baskettypetrays.22-3/4x 15-3/4 x 23-1/4(577 x 400 x 590)23(10.5)NOTE: Clearance variesaccording toinstruments. Refer tothe Equipment ManualP920007-826 forcomplete loadinginstructions.3 large instrument holders;12 small instrumentholders;13 flexible tubes for suction/irrigationconnections.2 large spindles;6 medium spindles6 small spindlesFor cleaning, rinsing, drying,and low-level thermaldisinfection of rigidMIS (minimally invasivesurgery) lumened instruments:outer tubes,Verres needles, suctiontips, biopsy channels, andsuction tubes, as well aslumened instruments: trocars,sleeves, bridges,and automatic flap valves.MIS Rack(MB00-0010)3-1/2 x 1-1/2 x 14(88 x 38 x 355)Mesh Basket withCoverSmall miscellaneousinstrument componentsHandles, connections,end caps, compressionsprings, etc.12-1/2 x 2.0 x 20-1/2(318 x 50 x 520)Instrument Tray withCover (MB00-0011)Miscellaneous nonlumenedinstruments orcomponentsFor cleaning, rinsing, drying,and low-level thermaldisinfection of nonlumenedcomponents andinstruments such asclamps, rods, etc.3-3/4 x 1-3/4 x 8-1/2(95 x 45 x 215)InstrumentSupport6 non-lumenedinstruments or insertsFor cleaning, rinsing, drying,and low-level thermaldisinfection trays ofnon-lumened rods,clamps, inserts, etc.Countertop(MB00-0019)37 x 6 x 33(940 x 152 x 838)42(15)N/A N/A Countertop for freestandinginstallation.Remote Printer Kit(MB00-0018)11 x 10 x 17(274 x 254 x 432)14(6.4)N/A N/A Printer records cyclevalues and data.Installation Kit(MB00-0020)(MB00-0036)(MB00-0037)(MB00-0040)14 x 9 x 25(356 x 229 x 635)38(17)N/AN/AUtilities Main Supply CordFlexible HosesService HandlesPressure RegulatorKlenzyme ® EnzymaticPresoak and Cleaner(1.0 U.S. gal [3.78 L])Renu-Klenz Neutral pHCleaner (1.0 U.S. gal[3.78 L])6
Table 3. ENGINEERING DATASHIPPINGWEIGHTlb (kg)OPERATINGWEIGHTlb (kg)A-WEIGHTEDEQUIVALENTSURFACE SOUNDHEAT LOSSBTU/h (W)per CYCLE*COLD WATERU.S. gal (L)per CYCLE*HOT WATERCONSUMPTIONper CYCLE*PURIFIED WATERCONSUMPTIONU.S. gal (L)660 (299) 420 (190) 65.4 dB 2420 (710) 11 (42) 11 (42) 2.75 (10.5)* Based on instrument cycle with drying option.Dynamic PressureHOT WATER(HW)15 to 50 psig(1.03 to 3.45 bar)COLD WATER(CW)30 to 50 psig(2.06 to 3.45 bar)PURIFIED WATER(PW)15 to 50 psig(1.03 to 3.45 bar)DRAINN/ABuilding Supply WaterTemperature110 to 150°F(43 to 66°C)70°F(21°C)70 to 150°F(21 to 66°C)N/AFlow Rate1.3 to 4.2 U.S. gpm(4.92 to 16.28 L/min)1.9 to 4.2 U.S. gpm(7.19 to 16.28 L/min)1.3 to 4.2 U.S. gpm(4.92 to 16.28 L/min)4.0 U.S. gpm(15.0 L/min)Minimum SpecificResistivityN/A N/A 0.1 megohm/cm N/A7