BouMatic

BouMaticTMSwing OverThe one-for-twomilking installationHigh-line milklineOne cluster for two milking unitsDetachers or milk metersStainless steel armEase of use

BouMaticTMThe Swing-Over design combinesperformance and reduced cost. It requires only half the number of clusters,detachers and pulsators.The Swing-Over set-up suits any type of milkingparlour and is available :- without detachers- with detachers (Isolator XP)- with milk meters MR 2000The pivoting arm at the pit centreline supports the detacher cylinder and the cluster assembly.With this design, the equipment can be used on both cow platforms in alternation, reducing thecycle time between two milking strings when cows leave and enter.The Swing-Over arm does not need any additional masonry work anddoes not disturb the milker, since it is located overhead.The equipment is kept out of water spray and shocks, flushing theplatforms and the milker pit is much easier for the operator.High-line assembly :- Milkline- Pulsators- Pulsation line- Detachers- Milk meters- etcYour dealer:D 160025BouMatic Gascoigne MelotteRue Jules Melotte 31 4350 Remicourt Belgium T +32 (0) 19 54 42 66 F +32 (0) 19 54 55 44 E info@boumatic.com www.boumatic.com