FS 150 - Elektro-Trading sp. z oo

• Change setting to i.e. 500 msec like shown:• Key B decrements digit highlighted by cursor0 0 0 0• Key C shifts cursor right0 0 0 0• Key A increments highlighted digit. Press A 5 times.0 5 0 0• Press P to store the new valueAccel 2When you slide the switch back to “RUN“, you read again “FS15013“ and the unit is ready tooperate.When you press “C“ instead, you come back to “DATA IN“ etc.Please note:The unit is unable to operate or to make serial communication while the slide switch is in the“PRG“ position!10. The LED DisplayThe 8 LED`s mounted on front of the module indicate the instantaneous positional errorbetween the real carriage position and the position where it should be in respect to the line. Thedisplay provides information for commissioning and fault monitoring, in a very simple form.redorangeyellowgreengreenyelloworangered256 +++128 - 25564 - 12732 - 6316 - 318 - 151 - 7+ / - 01 - 78 - 1516 - 3132 - 6364 - 127128 - 255256 ++++-Fig. 33When both green LED`s in the center are lit, the positional error is absolutely zero, this meansthe carriage is exactly where is should be at that time.When either of the green LED`s is lit alone, the error lies between 1 to 7 encoder bits. Whenone green and one yellow LED is lit, the position error lies between 8 to 15 bits, etc.28