SPECIFICATION<strong>PPA5<strong>500</strong></strong>PPA<strong>1<strong>500</strong></strong>/PPA<strong>500</strong>Frequency RangeDC,10mHz ~ 2MHz - <strong>PPA5<strong>500</strong></strong>-LC(10Arms), <strong>PPA5<strong>500</strong></strong>(30Arms)Normal PPA<strong>1<strong>500</strong></strong> DC,10mHz ~ 1MHz/ PPA<strong>500</strong> DC, 10mHz ~ <strong>500</strong>kHzDC,10mHz ~ 1MHz - <strong>PPA5<strong>500</strong></strong>-HC(50Arms)x10DC,10mHz ~ 100kHzVoltage Input300mVpk ~ 3000Vpk(1000Vrms) in 9 rangesNormal 1Vpk ~ 2<strong>500</strong>Vpk(1000Vrms) in 8 rangesRange(240Vrms within 300Vpk range, using 20% overange)x10100mVpk ~ 300Vpk in 8 rangesInternalNormal 0.05% Rdg+0.1% Rng+(0.005%×kHz)+5mVAccuracy0.01% Rdg+0.038% Rng+(0.004%×kHz)+1mVx100.05% Rdg+0.1% Rng+(0.01%×kHz)+1mVRange 300µVpk ~ 3Vpk in 9 ranges 【BNC connector 3Vpk max input】 1mVpk ~ 3Vpk in 8 ranges【BNC connector 3Vpk max input】ExternalAccuracy 0.01%Rdg+0.038%Rng+(0.004%×kHz)+1µV 0.05%Rdg+0.1%Rng+(0.005%×kHz)+5µVCurrent Input10Arms Low Current Ranges 3mApk ~ 30Apk(10Arms) in 9 ranges 20ArmsNormal 100mApk ~ 300Apk(20Arms) in 8 rangesRanges(<strong>PPA5<strong>500</strong></strong>-LC)(PPA<strong>1<strong>500</strong></strong>)0.01% Rdg+0.038% Rng+(0.004%×kHz)+x10 10mApk ~ 30Apk in 8 rangesShunt 4mm4mm safety connectors Accuracy10µASafetyNormal 0.05% Rdg+0.1% Rng+(0.005%×kHz)+<strong>500</strong>µAConnectorsAccuracy30Arms Current Ranges 30mApk ~ 300Apk(30Arms) in 9 ranges x10 0.05% Rdg+0.1% Rng+(0.01%×kHz)+100µAInternal(<strong>PPA5<strong>500</strong></strong>)0.01% Rdg+0.038% Rng+(0.004%×kHz)+ 30ArmsNormal 300mApk ~ 1000Apk(30Arms) in 8 rangesAccuracy Ranges4mm safety connectors100µA(PPA<strong>1<strong>500</strong></strong>-HC)x10 30mApk ~ 100Apk in 8 rangesShunt 4mm50Arms High Current Ranges 100mApk ~ 1000Apk(50Arms) in 9 ranges SafetyNormal 0.05% Rdg+0.1% Rng+(0.005%×kHz)+1mAAccuracy(<strong>PPA5<strong>500</strong></strong>-HC) **0.01% Rdg+0.038% Rng+(0.004%×kHz)+ Connectorsx10 0.05% Rdg+0.1% Rng+(0.01%×kHz)+300µAAccuracyTouch proof screw terminal300µABNC connector Ranges 1mVpk ~ 3Vpk in 8 rangesExternal inputRanges 300µVpk ~ 3Vpk in 9 rangesBNC Connector (Max(Max input(External shuntinput 3Vpk)0.01% Rdg+0.038% Rng+(0.004%×kHz)+ 3Vpk)Current sensor)Accuracy Accuracy 0.05% Rdg+0.1% Rng+(0.005%×kHz)+5µV1µVPhase Accuracy0.005deg+(0.01deg×kHz)【<strong>PPA5<strong>500</strong></strong>-LC(10Arms), <strong>PPA5<strong>500</strong></strong>(30Arms)】 Normal 0.01deg+(0.01deg×kHz)0.01deg+(0.02deg×kHz)【<strong>PPA5<strong>500</strong></strong>-HC(50Arms)】x100.01deg+(0.02deg×kHz)Power AccuracyNormal [0.1%+0.1%/pf+(0.01%×kHz)/pf] Rdg+0.1%VA Rng[0.03%+0.03%/pf+(0.01%×kHz)/pf] Rdg+0.03%VA Rngx10[0.1%+0.1%/pf+(0.02%×kHz)/pf] Rdg+0.1%VA Rng40-400Hz [0.03%+0.03%/pf+(0.01%×kHz)/pf] Rdg+0.02%VA Rng 40-400HzAs above with range error reduced from +0.1%V,A,VA Rdg to+0.05%V,A,VA RngGeneralCrest Factor20(Voltage and Current)Sample Rate 2.2Ms/s on all channels, No-Gap 1Ms/s on all channels, No-GapIEC ModesIEC61000 Harmonics and Flicker (<strong>PPA5<strong>500</strong></strong>), IEC62301 Standby PowerApplication ModesPWM Motor Drive, Ballast, Inrush, Power Transformer, Standby Power,Fluctuating Harmonics, Flicker MeterBallast, Inrush, Standby PowerCMRR - Common Mode Rejection Ratio250V @ 50Hz - Typical 1mA (150dB)100V @ 100kHz - Typical 3mA (130dB)Measurement ParametersW ,VA ,Var ,pf ,V & A - rms ,rectified mean ,AC ,DC ,Peak ,Surge ,Crest Factor ,Form Factor ,Star to Delta VoltageFrequency (Hz), Phase (deg), Fundamentals, ImpedanceHarmonics, THD, TIF, THF, TRD, TDDIntegrated Values, Datalog, Sum and Neutral valuesDatalog - Up to 4 user selectable measurement functions (30 with optional PC software)Datalog WindowNo-Gap analysis, Minimum window 10msMemory 10M records into flash RAM (Non-Volatile) RAM up to 16,000 recordsCommunication PortsRS232 Baud rate up to 38.4kbps,RTS/CTS flow controlLAN(Option L)10/100 Base-T Ethernet auto sensingGPIB(Option G) IEEE488.2 Compatible —USBUSB 2.0 and 1.1 compatibleAnalogue Output Bipolar ±10V(BNC) —Speed Input BNC Bipolar±10V or Pulse count 1Hz to 1MHz 0.01% Rdg —Torque BNC Bipolar±10V or Pulse count 1Hz to 1MHz 0.01% Rdg —Sync 4 〜 6 Phase measurement (Master/Slave) —Extension 4 〜 6 Phase (Master/Slave) + Auxilary Auxilary PortStandard AccessoriesLeadsPower, RS232, USBConnection Cables36A 1.5m long 4mm stackable terminals20A (Std version) or 30A (HC version) 1.5m long 4mm stackable terminals1x red, 1x yellow and 2x black per phase (1x red, 1x black with HC version)1x red, 1x yellow and 2x black per phaseConnection Clips4mm terminated aligator clips - 1x red, 1x yellow and 2x black per phase (1x red and 1x black per phase with <strong>PPA5<strong>500</strong></strong>-HC version)CD-ROMCommView2 (RS232/USB/LAN), Command line, Script based communication softwareDocumentsUser manual, Communications manual, Calibration certificate, Quick start guideMechanical/EnvironmentalDisplay 320×240 dot full colour TFT, White LED Backlit 480×272 dot full colour TFT, White LED BacklitDimensions 130H×400W×315D mm excluding feet 92H×215W×312D mm excluding feetWeight 5.4kg(1 Phase), 6kg(3 Phase) 3.3kg(1 Phase), 4kg(3 Phase)Safety Isolation1000Vrms or DC(CATII), 600Vrms or DC(CATIII)Power supply90 〜 265Vrms, 50 〜 60Hz, 40VAmaxOperatingConditions5˚C to 40˚C Ambient Temperature (or air intake temperature when rack mounted), 20-90% Non-Condensing Relative Humidity.Temperature coefficient ±0.01% per ˚C of reading at 5-8˚C and 28-40˚C14
MODELS<strong>PPA5<strong>500</strong></strong> <strong>Series</strong>Phases Model Specification1 Ph PPA5510-LC2 Ph PPA5520-LC3 Ph PPA5530-LC4 Ph PPA5540-LC5 Ph PPA5550-LC6 Ph PPA5560-LCDC,10mHz ~ 2MHz3mApk ~ 30Apk(10Arms)Phases Model Specification1 Ph PPA55102 Ph PPA55203 Ph PPA55304 Ph PPA55405 Ph PPA55506 Ph PPA5560DC,10mHz ~ 2MHz30mApk ~ 300Apk(30Arms)<strong>PPA5<strong>500</strong></strong> 3 Phase modelPhases Model Specification1 Ph PPA5510-HC2 Ph PPA5520-HC3 Ph PPA5530-HC4 Ph PPA5540-HC5 Ph PPA5550-HC6 Ph PPA5560-HCDC,10mHz ~ 1MHz100mApk ~ 1000Apk(50Arms)<strong>PPA5<strong>500</strong></strong> units in Master/Slave mode, synchronised for 4-6 Phase measurementsTouchproof 50Ascrew connectorsused on<strong>PPA5<strong>500</strong></strong>-HC andPPA2600-HCversionsPPA<strong>1<strong>500</strong></strong>/PPA<strong>500</strong> <strong>Series</strong>Phases Model Specification1 Ph PPA1510/510* DC,2 Ph PPA1520/520*10mHz ~ 1MHz100mApk ~ 300Apk3 Ph PPA1530/530*(20Arms)1 Ph PPA1510/510-HC* DC,2 Ph PPA1520/520-HC*10mHz ~ 1MHz300mApk ~ 1000Apk3 Ph PPA1530/530-HC*(30Arms)AccessoriesLeads and InterfacingType36A Connection lead set36A 4mm to spade (option)RS232 cableUSB cableUSB to 9-pin RS232 (Option)Master-Slave cable (Option)*PPA<strong>500</strong> DC, 10mHz ~ <strong>500</strong>kHzSpecification1.5 Meter - 36A lead set with 4mm stackable safety terminals1x Red, 1x Yellow and 2x Black per phase plus alligator clips1.5 Meter - 36A lead set with 4mm to spade for HC terminalsRS232 9pin serial CableUSB 2 Meter A male to B maleUSB ~ 9-pin RS232 Serial ConverterLeads for connecting 2x <strong>PPA5<strong>500</strong></strong> in master/slave modePPA<strong>1<strong>500</strong></strong> 3 Phase modelConnection and extension port accessories (Optional)TypeSpecificationBreakout boxSimple analyzer connection between source and DUTPCIS10Arms 300Apk rated Phase Controlled Inrush SwitchRack Mount Kit (Optional)TypeSpecificationRack Mount brackets PPA26/5<strong>500</strong> 19in rack mount brackets (model specific)Rack Mount panelPPA2<strong>500</strong> 19in rack facia panelInterface (Optional)TypePPA-LAN interfacePPA-GPIB interfaceSpecificationOption L - LAN InterfaceOption G - GPIB(IEEE488)Interface - PPA25/26 and 55 seriesCarry cases (Optional)TypeSoft carrying caseHard flight caseSpecificationBlack nylon with shoulder strapHard case with moulded lining suitable for shippingPC Software (Optional)TypePPA Dual Data LoggerPPAcommPPA Standby PowerPPAsoft PC softwareSpecificationPC control and data acquisition of 1 to 6 phases with selectableReal Time data, Graphing, Datalog and versatile export optionsBasic PC Control, Data storage, Print featuresStandby power measurements and reporting to IEC62301LabView based software, PC Control, Data storage and PrintDocuments (Standard)TypeCalibration/Test &Inspection certificateSpare set of manualsSpecificationPPA Certificate of calibrationUser manualComms manualPRODUCT COMPARISONPPA<strong>1<strong>500</strong></strong>/PPA<strong>500</strong> PPA2<strong>500</strong>/PPA2600 <strong>PPA5<strong>500</strong></strong>Basic AccuracyV, A rdg error 0.05% 0.04% 0.02%Power rdg error 0.10% 0.05% 0.03%PhaseInternal 1 〜 3Master/Slaveoperation— 4 〜 6Voltage InputMax input voltage 2<strong>500</strong>Vpk 3000VpkNo. of ranges 8 8 9Direct Current Input10Arms model — ○ ○20Arms model ○ — —30Arms model ○ ○ ○50Arms model — only PPA2600 ○No. of ranges 8 8 9PPA<strong>1<strong>500</strong></strong>/PPA<strong>500</strong> PPA2<strong>500</strong>/PPA2600 <strong>PPA5<strong>500</strong></strong>Frequency Band20A & 30A Shunt DC 〜 1MHz/<strong>500</strong>kHz — —10A & 30A Shunt — DC 〜 2MHz DC 〜 2MHz50A Shunt — DC 〜 1MHz DC 〜 1MHzFeaturesUSB Memory port ○ — ○Real time clock ○ — ○19in Rack mount option — only PPA2600 ○Other featuresSpeed-Harmonics/sec 300 300 1,800Non-volatile memory 192kB 192kB 1GBInternal data logging 4 4 16(4 X 4)Torque and speed Input — ○ ○Dimensions - Excl. FeetH x W x D (mm)92 x 215 x 312125 x 355 x 250125 x 430 x 250130 x 400 x 315Weight 3.3 - 4kg 5 - 6kg 5.4 - 6kg15