ACS OnSite Aparato A&E Specifications - Brivo Systems
ACS OnSite Aparato A&E Specifications - Brivo Systems
ACS OnSite Aparato A&E Specifications - Brivo Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Page 19 Architectural and Engineering <strong>Specifications</strong>: <strong>Aparato</strong> ®2.07 BRIVO IPDCSupervised linear power supply with battery backup, input surge protection,and AC Fail and battery low contact outputs. Relays can be configured tosupply power as follows:1) Available Power: The EdgeReader is capable of supplying a total of600 mA to field devices. Unpowered, relay contacts are rated for 30VDC @ 2 A2) Use of a Listed Access Control / Burglary power-limited power supplyis required for all listed installations.11. The EdgeReader is intended for use in indoor environments that comply withthe following specifications:a. Operating Temperature: 32° to 122° F (0° to 50° C)b. Operating Humidity: 5% to 95% relative, non-condensing12. Communication Ports:a. Ethernet – 10 or 100 Mbpsb. RS-232 – port for Modem or connectivity to other systems13. Certifications:a. UL 294 Listed Componentb. CSA 205 for Canadac. FCC Class A Verification (FCC and Industry Canada Certification forReader only)d. ICES-003 Class A Canadae. EU1) (CE Marking), Australia2) (C-Tick Mark), New ZealandA. <strong>Brivo</strong> IPDC Door Controller1. Mounting: Single-gang style electrical box2. Dimensions: 3.3” W x 4.8” H x 1.5” D (83.8 mm W x 121.9 mm H x 36.3 mmD)3. Compliance: UL 294 Listed Component, CSA 205 for Canada (Pending), FCCClass A Verification (Pending), ICES-003 Class A Canada (Pending), EU (CEMarking) (Pending), Australia (C-Tick Mark, New Zealand (Pending)4. Card format: Supports any card data format up to 128bit5. 25,000 cardholder memory6. 6,000 event history (FIFO) offline from host7. Power Supply Requirements: 12 VDC @ 1.5 Aa. Recommended: Power is supplied using the Power over the Ethernettechnology available with PoE (802.3af) enabled network devices.Alternate: Supervised 12 VDC linear power supply with battery backup,input surge protection, and AC Fail and battery low contact outputs. Relayscan be configured to supply power as follow:1) Available Power: The IPDC is capable of supplying a total of 700mAto field devices. Unpowered, relay contacts are rated for 30 VDC @ 2A2) Use of a Listed Access Control / Burglary power-limited power supplyis required for all listed installations.8. The IPDC is intended for use in indoor environment that comply with thefollowing specifications:© 2013 <strong>Brivo</strong> <strong>Systems</strong> LLC. All rights reserved. 3/1/2013
Change language