12.07.2015 Views

WALLPACK HID LIGH

WALLPACK HID LIGH

WALLPACK HID LIGH

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FeaturesHousingThe stylish cast aluminum housing incorporates aborosilicate glass refractor, which is siliconed in placeto provide a watertight lens assembly. The housing isfinished in a bronze polyester powder coat.Ballast / LampHigh-pressure sodium fixtures aresupplied with either a 120V NPF reactor ballast(optional HPF available) or high-reactance multi-tapballast. Metal Halide fixtures are provided with highreactanceor CWA multi-tap ballasts. All fixtures aresupplied with medium-based lamps.OptionsThe WPG fixture is available with a factory-installedbutton photocell for 120V or 277V.Mounting OptionsThe cast aluminum base plate mounts directly over arecessed outlet box or can be surface mounted usingthe convenient conduit access on the fixture base.Photometric Data(Isofootcandle Plots)-5'0-10'-15'-20'-25'-30'-35'-30'9” WPG-25'-20' -15' -10' -5' 0 5' 10' 15' 20' 25' 30'.3.51100W Metal Halide Wall Pack at 14’ mounting height.3WPG Series 9” Compact Glass Prismatic WallpackLamp IncludedWattage Range:HPS 35 - 100WMH 50 - 100WThis specification-grade compact wallpack isdesigned for both commercial and residentialapplications with wall mounting heightrequirements of 14’ and above.<strong>HID</strong> <strong>LIGH</strong>TING – <strong>WALLPACK</strong>S & GARAGE <strong>LIGH</strong>TERSWPG Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberWall 35W HPS WPG0503-1*(b)NPF50W HPSWPG0505-1*(b)NPF50W HPSWPG0505-M*(b)70W HPSWPG0507-1*(b)NPF70W HPSWPG0507-M*(b)100W HPSWPG0510-1*(b)NPF100W HPSWPG0510-M*(b)50W PS/MHWPG0805-M*(b)70W PS/MHWPG0807-M*(b)100W PS/MH WPG0810-M*(b)DimensionsListed for Wet LocationsConsult Factory for CUL AvailabilityFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WPG Series 9.5” 9.0” 7.5” 10 lbs.*See Voltage belowVoltage (a)1 = 120V2 = 277VM = Multi-tapOptions (b) (Factory Installed)HPF = High Power Factor(120V only - change NPF to HPF)B = Button Photocell (Must designate voltage - change“M” to “1” for 120V or “2” for 277V)HWExampleWPG 0 5 05 M BSeries Mounting Light Source Wattage Voltage OptionsWPG = 9” CompactGlass PrismaticWallpack0 = Hard wire 5 = HPS 05 = 50W M = Multi-tap B = Button photocellDCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com201

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!