WALLPACK HID LIGH

HID LIGHTING – WALLPACKS & GARAGE LIGHTERS196 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

HID LightingWALLPACKS &GARAGE LIGHTERSCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com197

WSS Series 11” WallpackHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:HPS 35 - 70WCFL 13 - 32WEconomical and cost-effective to own and operate,the WSS Series Wallpacks are designed forboth residential and commercial applications withmounting heights of 12’ and below.13W & 2-13W: 32°FTemperature Rated*18 - 32W Quad: 20°FTemperature Rated*(*minimum starting temperatures)Lamp IncludedFeaturesHousingThe compact WSS luminaire is weatherproof andrated for outdoor use. Features a cast aluminumbase plate and a polycarbonate injection moldedrefractor. Housing is available in either bronze orwhite. Access to all internal components requires theremoval of only two screws. Tamperproof screws areavailable.Ballast / LampThe high-pressure sodium version of the WSS fixtureis available in 35 - 70 watt utilizing a 120V NPFballast and a medium based lamp. The 13 watt twintube compact fluorescent design comes standard witha bi-pin lamp and a 120V NPF ballast, while the 18- 32 watt version is supplied with a 4-pin lamp and a120 or 277V electronic ballast.Mounting OptionsThe WSS Series can be surface mounted directlyover a 4” recessed outlet box. Convenient conduitaccess on fixture base allows for easy surfacemounting. Optional internal photocell is available.Recommended mounting height is 12’ and below.Photometric Data(Isofootcandle Plots)11” WSS30' 20' 10' 0 10' 20' 30'30201001.5101.5.2203070W HPS Wallpack at 10’ mounting height.AVAILABLECFLDimensionsListed for Wet LocationsConsult Factory for CUL AvailabilityFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WSS Series 11” 6.9” 5.25” 5 lbs.WHPS-70 Watt/ClearMounting Height: 10’Number of Fixtures: 2Lamp Lumens: 6,300The WSS Series photometric data is based on a 70 watt clear HPS lamp rated at 6,300 lamp lumens. Footcandle valuesfor other wattages are obtained by multiplying the chart values by the following factors:Lamp/Wattage Factor70W HPS 150W HPS .6435W HPS .36WSS Wallpack Ordering InformationHMounting Position Wattage Lamp Catalog NumberWall 35W HPS WSS0503-1*(b)50W HPS WSS0505-1*(b)70W HPS WSS0507-1*(b)13W CFL WSS0313-1*(b)18W CFL WSS0318-U*(b)26W CFL WSS0326-U*(b)32W CFL WSS0332-U*(b)(2) 13W CFL WSS0323-1*(b)*See Voltage belowVoltage1 = 120V NPF onlyU = 120-277 CFLOptions (b) (FactoryInstalled)B = Button PhotocellWT = White HousingAccessories: (Field Installed)WSS-TS = Tamperproof ScrewsWSS-TSD = Tamperproof Screwdriver & ScrewsD198 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

FeaturesHousingThis stylish cast aluminum housingincorporates a borosilicate glass refractor, siliconed inplace to provide a watertight assembly. The housingis finished in a polyester powder coat in white orbronze.Ballast / LampHigh-pressure sodium fixtures aresupplied with either a 120V NPF reactor ballast(optional HPF available) or high-reactance multi-tapballast. Metal Halide fixtures are provided with highreactanceor CWA multi-tap ballasts. All fixtures aresupplied with medium-base lamps.Mounting OptionsThe cast aluminum base plate mounts directly over arecessed outlet box or can be surface mounted usingthe convenient conduit access on the fixture base.WPS Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberPhotometric Data(Isofootcandle Plots)Wall 35W HPS WPS0503-1*(b)NPF50W HPSWPS0505-1*(b)NPF50W HPSWPS0505-M*(b)70W HPSWPS0507-1*(b)NPF70W HPSWPS0507-M*(b)100W HPSWPS0510-1*(b)NPF100W HPSWPS0510-M*(b)50W PS/MHWPS0805-M*(b)70W PS/MHWPS0807-M*(b)100W PS/MH WPS0810-M*(b)*See Voltage belowVoltage Options (b) (Factory Installed) Accessories: (Field Installed)1 = 120V (NPF only)M = Multi-tapWT = White HousingHPF = High Power Factor(120V only - change NPF to HPF)B = Button Photocell (Must designate voltage - change“M” to “1” for 120V or “2” for 277V)WPS-WG = Wire Guard25'0'25'50'75'100'13” WPS100'75'50'.125'.5.3WPS Series 13” Die Cast Aluminum Wallpack0' 25' 50' 75' 100'100W Metal Halide Wallpack at 15’ mounting height.153Lamp IncludedDimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WPS Series 13.0” 7.83” 5.5” 10 lbs.WWattage Range:HPS 35 - 100WMH 50 - 100WThis specification grade compact wallpack isdesigned for both commercial and residentialapplications with wall mounting heightrequirements of 15’ and below.Listed for Wet LocationsConsult Factory for CUL AvailabilityHID LIGHTING – WALLPACKS & GARAGE LIGHTERSHExampleWPS 0 4 25 2 WT QSeries Mounting Light Source Wattage Voltage Options AccessoriesWPS = 13” Die Cast 0 = Hard wire 4 = MH 25 = 250W 2 = 277 Volt WT = White Q = Quartz StandbyAluminum WallpackHousingDCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com199

WPC Series 9” Polycarbonate WallpackHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:HPS 35 - 100WMH 50 - 70WCFL 26-42WLamp IncludedThis specification grade compact wallpack isdesigned for both commercial and residentialapplications with wall mounting heightrequirements of 12’ and below.AVAILABLECFLFeaturesHousingThe stylish cast aluminum housing incorporatesa polycarbonate refractor, which is sealed to thehousing using a silicon gasket and stainless steelscrews that provide a watertight lens assembly. Thehousing is finished in a bronze polyester powdercoat.Ballast / LampHigh-pressure sodium fixtures are supplied witheither a 120V NPF reactor ballast (optional HPFavailable) or high-reactance multi-tap ballast. MetalHalide fixtures are provided with high-reactance orCWA multi-tap ballasts. All fixtures are supplied withmedium-based lamps. CFL fixtures include 120/277Velectronic ballasts.LensImpact-resistant polycarbonate lens comes standardwith a UV inhibitor.OptionsThe WPC Series is available with a factory-installedbutton photocell for 120V or 277V.Photometric Data(Isofootcandle Plots)9” WPC-25' -20' -15' -10' -5' 0 5' 10' 15' 20' 25'0-5'2-10'1-15'.5-20'-25'.3-30'70W Metal Halide Wall Pack at 12’ mounting height.Mounting OptionsListed for Wet LocationsConsult Factory for CUL AvailabilityThe cast aluminum base plate mounts directly over arecessed outlet box or can be surface mounted usingthe convenient conduit access on the fixture base.DimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WPC Series 9.5” 9.0” 7.5” 10 lbs.HWWPC Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberWall 35W HPS WPC0503-1*(b)NPF50W HPSWPC0505-1(b)NPF50W HPSWPC0505-M(b)70W HPSWPC0507-1(b)NPF70W HPSWPC0507-M(b)100W HPSWPC0510-1(b)NPF100W HPSWPC0510-M(b)50W PS/MHWPC0805-M(b)70W PS/MHWPC0807-M(b)26W CFLWPC0326-D32W CFLWPC0332-D42W CFLWPC0342-D*See Voltage belowVoltage1 = 120V2 = 277VM = Multi-tapD = Dual-tap 120/277V (CFL only)Options (b) (Factory Installed)HPF = High Power Factor(120V only - change NPF to HPF)B = Button Photocell (Must designate voltage - change“M” to “1” for 120V or “2” for 277V)D200 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

FeaturesHousingThe stylish cast aluminum housing incorporates aborosilicate glass refractor, which is siliconed in placeto provide a watertight lens assembly. The housing isfinished in a bronze polyester powder coat.Ballast / LampHigh-pressure sodium fixtures aresupplied with either a 120V NPF reactor ballast(optional HPF available) or high-reactance multi-tapballast. Metal Halide fixtures are provided with highreactanceor CWA multi-tap ballasts. All fixtures aresupplied with medium-based lamps.OptionsThe WPG fixture is available with a factory-installedbutton photocell for 120V or 277V.Mounting OptionsThe cast aluminum base plate mounts directly over arecessed outlet box or can be surface mounted usingthe convenient conduit access on the fixture base.Photometric Data(Isofootcandle Plots)-5'0-10'-15'-20'-25'-30'-35'-30'9” WPG-25'-20' -15' -10' -5' 0 5' 10' 15' 20' 25' 30'.3.51100W Metal Halide Wall Pack at 14’ mounting height.3WPG Series 9” Compact Glass Prismatic WallpackLamp IncludedWattage Range:HPS 35 - 100WMH 50 - 100WThis specification-grade compact wallpack isdesigned for both commercial and residentialapplications with wall mounting heightrequirements of 14’ and above.HID LIGHTING – WALLPACKS & GARAGE LIGHTERSWPG Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberWall 35W HPS WPG0503-1*(b)NPF50W HPSWPG0505-1*(b)NPF50W HPSWPG0505-M*(b)70W HPSWPG0507-1*(b)NPF70W HPSWPG0507-M*(b)100W HPSWPG0510-1*(b)NPF100W HPSWPG0510-M*(b)50W PS/MHWPG0805-M*(b)70W PS/MHWPG0807-M*(b)100W PS/MH WPG0810-M*(b)DimensionsListed for Wet LocationsConsult Factory for CUL AvailabilityFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WPG Series 9.5” 9.0” 7.5” 10 lbs.*See Voltage belowVoltage (a)1 = 120V2 = 277VM = Multi-tapOptions (b) (Factory Installed)HPF = High Power Factor(120V only - change NPF to HPF)B = Button Photocell (Must designate voltage - change“M” to “1” for 120V or “2” for 277V)HWExampleWPG 0 5 05 M BSeries Mounting Light Source Wattage Voltage OptionsWPG = 9” CompactGlass PrismaticWallpack0 = Hard wire 5 = HPS 05 = 50W M = Multi-tap B = Button photocellDCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com201

HID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:150 - 400WLamp IncludedThis all-weather fixture provides maximumwattage in a small package. In addition to beingan effective security or accent light, the slim-linedesign of the WPL Series makes it aestheticallypleasing. Specially-designed optics providemaximum light spread, making the WPL Seriesan extremely efficient and powerful wallpack.FeaturesHousingCompact cast aluminum housing is designed toprovide maximum wattage in a small package.BallastAll fixtures come standard with a CWA high-powerfactor multi-tap or a 480V metal halide ballast. Pulsestart metal halide and high-pressure sodium ballastsare available.LampsA compact, heat-dissipating design allows up to 400Wmetal halide, pulse start metal halide and highpressuresodium lamps.Photometric Data(Isofootcandle Plots)15” WPLWPL Series 15” Square WallpackMounting OptionsThe WPL Series has convenient conduit access on allsides for easy surface wiring. Rear 1/2” knockoutsallow for mounting over a 3” or 4” recessed outletbox. Units wall mount or surface mount to concrete,brick, or steel using additional knockouts.100' 75' 50' 25' 0 25' 50' 75' 100'0525'Listed for Wet LocationsConsult Factory for CUL Availability50'31DimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WPL Series 15.75” 15.75” 7.25” 25 lbs.HW.575'.3.1100'400W Metal Halide Wallpack at 20’ mounting height.WPL Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberWall 150W PS/MH WPL0815-(a)(b)175W MHWPL0417-(a)(b)200W PS/MH WPL0820-(a)(b)250W MHWPL0425-(a)(b)250W PS/MH WPL0825-(a)(b)320W PS/MH WPL0832-(a)(b)350W PS/MH WPL0835-(a)(b)400W MHWPL0440-(a)(b)400W PS/MH WPL0840-(a)(b)150W HPSWPL0515-(a)(b)250W HPSWPL0525-(a)(b)400W HPSWPL0540-(a)(b)DVoltage (a) Options (b) (Factory Installed) Accessories (Field Installed)1 = 120V2 = 277V3 = 208V4 = 240V5 = 480VBK = Black HousingWT = White Housing(Custom Colors Available: Consult factory for pricingand delivery)PT-20 = Photocell202 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

General illumination guidelines in footcandlesBuilding ExteriorsArea Horizontal Illuminance Vertical IlluminanceActive entrances (pedestrian and/or conveyance) 5 3Inactive entrances (normally locked, infrequently used) 3 3Prominent Structures 5 3Parking GaragesAreaHorizontal IlluminanceHorizontal Uniformity RatioVertical Illuminance (min)(min)(max/min)Basic 1 0.5 10/1RampsDay 2 1 10/1Night 1 0.5 10/1Entrance AreasDay 50 25Night 1 .5 10/1Pedestrian WalkwaysClassificationMinimum AverageHorizontal IlluminanceMinimum Average Vertical Levelsfor Special Pedestrian SecuritySidewalks and Type A bikewaysCommercial Areas 1 2.2Intermediate Areas 0.6 1.1Residential Areas 0.2 0.5Walkways distant from roadwaysand Type B bikewaysWalkways, bikeways, and stairways 0.5 0.5Pedestrian Tunnels 4.3 5.4HID LIGHTING – WALLPACKS & GARAGE LIGHTERSService StationsArea Horizontal Illuminance Vertical IlluminanceLight SurroundingApproach 2 0.5Driveway 2 0.5Pump Island area 5 3Building Faces (exclusive of glass) 3 3Service Areas 3 3Landscape Highlights 2 0.5Dark SurroundingApproach 1.5 0.5Driveway 1.5 0.5Pump Island area 3 3Building Faces (exclusive of glass) 2.0 0.5Service Areas 2.0 0.5Landscape Highlights 1.0 0.3The above guidelines are based on IES recommendations only.Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com203

WSM Series 13” WallpackHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:MH 50 - 175WCFL 26-84WDesigned for 12 to 18 foot mounting heights,the WSM Wallpack efficiently lights walkways,building exteriors, loading docks, bridges andmost security areas with a wide light distribution.40°C Ambient RatedAVAILABLECFLLamp IncludedListed for Wet LocationsConsult Factory for CUL AvailabilityFeaturesHousingThe bronze die-cast aluminum housing, thickprismatic glass refractor and stainless steel hardwaretogether make the WSM Series resistant to weatherand vandalism.BallastThe 50-150W pulse start metal halide fixtures utilizea multi-tap high reactance ballast. The 175W metalhalide fixture is provided with either a constantwattage multi-tap or 480V ballast. HPS fixtures canbe ordered with a 120V NPF reactor ballast or amulti-tap high reactance HPF ballast. 120V reactorballasts can be ordered with optional HPF. 150Whigh pressure sodium fixtures are also available with480V ballasts.LampsThe WSM Series comes standard with a medium baselamp. The 175 watt metal halide can be orderedwith an optional mogul base lamp.LensBoth the door and prismatic glass lens utilizeweatherproof silicone gasketing to seal outcontaminants.Access / WiringThe side-hinged door opens easily using twocaptive stainless steel screws to provide easy accessto internal components. Wiring options includemounting over a 4” recessed junction box or surfacemounting using convenient conduit entries located onside and bottom of fixture. Additional knockouts areprovided for optional photocell.Mounting OptionsThe recommended wall mounting height is 12’ to 18’.Photometric Data(Isofootcandle Plots)13” WSM604020020406060' 40' 20' 0 20' 40' 60'107175W MH Wallpack at 15’ mounting height.31.5.3.1DimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WSM Series 9” 13” 7.5” 15 lbs.HWMH-175 Watt/ClearMounting Height: 15’Number of Fixtures: 2Lamp Lumens: 12,800The WSM Series photometric data is based on a 175 watt clear MH lamp rated at 12,800 lamp lumens.Footcandle values for other wattages are obtained by multiplying the chart values by the following factors:Lamp/Wattage Factor Lamp/Wattage Factor150W PS/MH .90 100W HPS .71100W PS/MH .58 70W HPS .4770W PS/MH .31 50W HPS .3050W PS/MH .2565'60'55'50'45'40'35'30'25' 20' 15' 10' 5' 0' 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60' 65'15'MinimumFootcandleValues2 fc1 fc.5 fc.3 fc.2 fc0510152025303540455055606570D204 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

WSM Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberWall 50W PS/MH WSM0805-M*(b)70W PS/MHWSM0807-M*(b)100W PS/MH WSM0810-D*(b)150W PS/MH WSM0815-M*(b)175W MHWSM0417-M*(b)175W MH (MOGUL) WSM9417-M*(b)50W HPS 120V (NPF) WSM0505-1*(b) NPF50W HPSWSM0505-M*(b)70W HPS 120V (NPF) WSM0507-1*(b) NPF70W HPSWSM0507-M*(b)100W HPS 120V (NPF) WSM0510-1*(b) NPF100W HPSWSM0510-M*(b)150W HPS 120V (NPF) WSM0515-1*(b) NPF150W HPSWSM0515-M*(b)26W CFLWSM0326-D*32W CFLWSM0332-D*42W CFLWSM0342-D*(2) 26W CFL WSM0352-D*(2) 32W CFL WSM0364-D*(2) 42W CFL WSM0384-D**See Voltage belowVoltage Options (b) (Factory Installed) Accessories (Field Installed)1NPF = 120V (HPS only)5 = 480V (available only in 175W MH &150W HPS)D = Dual Voltage 120/277Vs (CFL only)M = Multi-tap, tapped @ 277VHPF = High Power Factor(HPS 120V only - change NPF to HPF)WT = White HousingBK = Black Housing(x)B = Button PhotocellDesignate voltage (x):1 = 120V2 = 277V3 = 208V4 = 240VWGM = Wire GuardPGM = Polycarbonate Guard (Vandal Shield)WSM-TS = Tamperproof Screws (not shown)WSM-TSD = Tamperproof Screws &Screwdriver (not shown)Glare ShieldsWSM-GS = Side CutoffWSM-GSF = Full CutoffWSM Series 13” WallpackAccessoriesWire GuardOrdering CodeWGMVandal ShieldOrdering CodePGMGlare Shield SideCutoffOrdering CodeWSM-GSFull Cutoff ShieldHID LIGHTING – WALLPACKS & GARAGE LIGHTERSExampleWSM 0 5 05 M WTOrdering CodeWSM-GSFSeries Mounting Light Source Wattage Voltage OptionsWSM = 13” Wallpack 0 = Hard wire 5 = HPS 05 = 50W M = Multi-tap WT = White housingCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com205

WSL Series 18” WallpackHID LIGHTING – WALLPACKS & GARAGE LIGHTERSDesigned for 18 to 24 foot mounting heights,the WSL Wallpack delivers high light levels overa very large area for offices, schools, shoppingcomplexes, garages and walkways.40°C Ambient RatedAVAILABLECFLLamp IncludedFeaturesHousingThe bronze die-cast aluminum housing, thickprismatic glass refractor and stainless steel hardwaretogether make the WSL Series Wallpacks resistant toboth weather and vandalism.BallastAll HID fixtures come standard with a CWA highpowerfactor, multi-tap or 480V ballast. CFL fixturesinclude 120/277V electronic ballasts.LampsThe WSL luminaire uses mogul base, metal halidelamps (175 - 400W) and HPS (250-400W) lamps.(Note: To increase light levels by 20%, specify a pinorientedsocket using a MS400/HOR.) CFL Fixturesinclude 4-pin quad lamps.Access / WiringThe side-hinged door opens easily using twocaptive stainless steel screws to provide easy accessto internal components. Wiring options includemounting over a 4” recessed junction box or surfacemounting using convenient conduit entries located onside and bottom of fixture. Additional knockouts areprovided for optional photocell.Mounting OptionsThe recommended wall mounting height is 18’ to 24’.Units include rear 1/2” conduit points access with drillpoints for mounting.Photometric Data(Isofootcandle Plots)18” WSL60402002060'40' 20' 0 20' 40' 60'40400W MH Wall Pack at 20’ mounting height. 1.560.31073Listed for Wet LocationsConsult Factory for CUL AvailabilityDimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WSL Series 9” 18” 13” 26 lbs.HWMH-400 Watt/ClearMounting Height: 20’Number of Fixtures: 2Lamp Lumens: 32,000The WSL Series photometric data is based on a 400 watt clear MH lamp rated at 32,000 lamp lumens.Footcandle values for other wattages are obtained by multiplying the chart values by the following factors:Lamp/Wattage Factor Lamp/Wattage Factor400W MH/HOR 1.20400W MH 1.00 400W HPS 1.56250W MH .63 250W HPS .91D65'60'55'50'45'40'051015202530354045505560657035'30'25' 20' 15' 10' 5' 0' 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60' 65'20'MinimumFootcandleValues10 fc5 fc2 fc1 fc.5 fc206 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

WSL Wallpack Ordering InformationMounting Position Wattage Lamp Catalog NumberWall 175W MH WSL0417-(a)(b)200W PS/MH WSL0820-(a)(b)250W MHWSL0425-(a)(b)250W PS/MH WSL0825-(a)(b)320W PS/MH WSL0832-(a)(b)350W PS/MH WSL0835-(a)(b)400W MHWSL0440-(a)(b)400W PS/MH WSL0840-(a)(b)400W MS/HORWSL0740-(a)(b)Position-oriented socket250W HPSWSL0525-(a)(b)400W HPSWSL0540-(a)(b)(2) 26W CFL WSL0352-D*(2) 32W CFL WSL0364-D*(2) 42W CFL WSL0384-D**Dual-tap 120/277V (CFL only)Voltage (a) Options (b) (Factory Installed) Accessories (Field Installed)5 = 480VM = Multi-tap tapped @ 277VM5 = 120 - 480V400 W MH OnlyD = Dual-tap 120/277V (CFL only)(x)B = Button Photocell -designate voltage (x):1 = 120V2 = 277V3 = 208V4 = 240VWT = White HousingBK = Black HousingWGL = Wire GuardPGL = Polycarbonate Guard (Vandal Shield)PT-20 = External PhotocellWSL-TS = Tamperproof Screws (not shown)WSL-TSD = Tamperproof Screws &Screwdriver (not shown)Glare ShieldsWSL-GS = Side CutoffWSL-GSF = Full CutoffWSL Series 18” WallpackAccessoriesWire GuardOrdering CodeWGLVandal ShieldOrdering CodePGLGlare Shield SideCutoffOrdering CodeWSL-GSHID LIGHTING – WALLPACKS & GARAGE LIGHTERSFull Cutoff ShieldExampleWSL 0 4 17 M WTOrdering CodeWSL-GSFSeries Mounting Light Source Wattage Voltage OptionsWSL = 18” Wallpack 0 = Hard wire 4 = MH 17 = 175W M = Multi-tap WT = White HousingCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com207

HID LIGHTING – WALLPACKS & GARAGE LIGHTERSDimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WFM Series 9” 13” 11.5” 15 lbs.WFL Series 9” 18” 17.2” 26 lbs.WFM SeriesHLamp IncludedThe WFM/WFL Series Wallpacks offer a widelight distribution with controlled light spillage.These versatile fixtures can be mounted up ordown to direct lighting to specific areas. TheWFM model is designed for 12’ to 18’ mountingheights while the WFL can be mounted atheights of 18’ - 24’.40°C Ambient RatedAVAILABLECFLListed for Wet LocationsConsult Factory for CUL AvailabilityFeaturesHousingThe bronze die-cast aluminum housing, thickprismatic glass refractor and stainless steel hardwaretogether make the WFM & WFL Series Full CutoffWallpacks resistant to both weather and vandalism.Dark sky compliant.BallastThe 50-150W pulse start metal halide fixtures utilizea multi-tap high reactance ballast. The 175W metalhalide fixture is provided with either a constantwattage multi-tap or 480V ballst. HPS fixtures canbe ordered with a 120V NPF reactor ballast or amulti-tap high reactance HPF ballast. 120V reactorballasts can be ordered with optional HPF. 150W highpressure sodium fixtures are also available with 480Vballasts. All sizes of the WFL Wallpacks are suppliedwith a constant wattage HPF multi-tap or 480Vballast. CFL fixtures include 120/277V electronicballasts.LampsThe WFM luminaire uses a medium base metal halidelamp (50 - 175W) or a medium base HPS lamp (50- 150W). The WFL luminaire uses mogul base, metalhalide lamps (175 - 400W) and HPS (250-400W)lamps. CFL Fixtures include 4-pin quad lamps.LensBoth the door and prismatic glass lens utilizeweatherproof silicone gasketing to sealout contaminants.Access / WiringThe side-hinged door opens easily using two captivestainless steel screws to provide easy access tointernal components. Wiring options include mountingover a 4” recessed junction box or surface mountingusing convenient conduit entries located on side andW Series 13” & 18” Full Cutoff Wallpackbottom of fixture. Additional knockouts are providedfor optional photocell.Mounting OptionsThe recommended wall mounting height of theWFM Wallpack is 12’ to 18’. The recommended wallmounting height of the WFL Series is 18’ to 24’.Units include rear 1/2” conduit holes access withdrill points for mounting.DARK SKYDark Sky compliant whenmounted in down positionWWFL SeriesDHWBoth the WFM and WFL Series fixtures can be pointed up or down toprovide directed lighting in specific areas.D208 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

W Series 13” & 18” Full Cutoff WallpackW Series Wallpack Ordering InformationSeries Wattage Lamp Catalog NumberWFM Series 13” WallpackWall 50W PS/MH WFM0805-M*(b)70W PS/MHWFM0807-M*(b)100W PS/MH WFM0810-M*(b)150W PS/MH WFM0815-M*(b)175W MHWFM0417-M*(b)175W MH (MOGUL) WFM9417-M*(b)50W HPS 120V (NPF) WFM0505-1*(b) NPF50W HPSWFM0505-(a)(b)70W HPS 120V (NPF) WFM0507-1*(b) NPF70W HPSWFM0507-(a)(b)100W HPS 120V (NPF) WFM0510-1*(b) NPF100W HPSWFM0510-(a)(b)150W HPS 120V (NPF) WFM0515-1*(b) NPF150W HPSWFM0515-M*(b)(2) 26W CFL WFM0352-D*(2) 32W CFL WFM0364-D*(2) 42W CFL WFM0384-D*WFL Series 18” WallpackWall 175W MH WFL0417-(a)(b)200W PS/MH WFL0820-(a)(b)250W MHWFL0425-(a)(b)250W PS/MH WFL0825-(a)(b)320W PS/MH WFL0832-(a)(b)350W PS/MH WFL0835-(a)(b)400W MHWFL0440-(a)(b)400W PS/MH WFL0840-(a)(b)250W HPSWFL0525-(a)(b)400W HPSWFL0540-(a)(b)(2) 32W CFL WFL0364-D*(2) 42W CFL WFL0384-D*HID LIGHTING – WALLPACKS & GARAGE LIGHTERS*See Voltage belowVoltage (a)1 = 120V2 = 277V3 = 208V4 = 240V5 = 480V (150W and above only)M = Multi-tap; tapped @ 277VD = Dual-tap 120/277V (CFL only)Options (b) (Factory Installed)HPF = High Power Factor (HPS 120V only - change NPF to HPF)WT = White HousingBK = Black HousingB = Button Photocell (Must designate voltage - change M to “1”for 120 V or “2” for 277 V)ExampleWFL 0 4 17 M WTSeries Mounting Light Source Wattage Voltage OptionsWFL = 18” Full Cutoff 0 = Hard wire 4 = MH 17 = 175W M = Multi-tap WT = White HousingWallpackCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com209

HID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:100W and 175 MH150W HPS and PS/MHThis crescent-shaped, surface mount wallpack isideal for parking areas, entrances, walkways,underpasses, loading docks, recreation areas andtunnels.DARK SKYLamp IncludedDark Sky compliant whenmounted in down positionFeaturesHousingHeavy-duty die cast aluminum housing is powdercoatedin a dark architectural bronze color. Siliconerubber prevents any leakage due to outside elements.BallastThe 175W MH version is furnished with a high powerfactor, constant wattage multi-tap ballast. The 100WMH and 150W HPS versions are furnished with a highpower factor, high reactance multi-tap ballast.LampsFixtures are supplied with medium base lamps.ReflectorOne-piece anodized aluminum designed reflector forbest light efficiency.Mounting OptionsThe WCM series wallpack is easy to install directlyto a 4” recessed outlet box or 1/2” surface conduitinto a 1/2” threaded bushing. Built-in level for easy,accurate installation.Photometric Data(Isofootcandle Plots)WCM Series 18” Stargazer WallpackListed for Wet LocationsConsult Factory for CUL AvailabilityDimensionsFixture Fixture Fixture Approx.Height Width Depth Ship Wt.WCM Series 7.1” 18” 9.25” 12.87 lbs.18” WCM32.1.57.1”1025102019.25”213.2450 1 2 3 4 5 6 718”Distance in Units of Mounting HeightValues Based On 10 Foot Mounting Height1/2 Maximum Candela Trace Shown as Dashed Curve(+) = Maximum Candela PointCat. # WCM0417-M210 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.comPage 6

WCM Series 18” Stargazer WallpackWCM Series Ordering InformationWCM Mounting ProcedureAMounting Position Wattage Lamp Catalog Number100 watt PS/MH WCM0810-M*Wall 175 watt MH WCM0417-M *150 watt HPS WCM0515-M**Multi-tap tapped @277Remove mounting screwsfrom fixture150 watt PS/MH WCM0815-M*BGently pull the mounting plate andgasket from the housingHID LIGHTING – WALLPACKS & GARAGE LIGHTERSCInstall plate to the mounting surfaceutilizing the integrated levelINTEGRATED LEVELDEConnect wires and mount fixture tothe plateReinstall mounting screwsCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com211

GCS/GVV Series 8” & 12” Square Canopy LightersHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:GCS 35 - 70WGCS 18-24W CFLGVV 50 - 175WGVV 26-84W CFLThe rugged and tamperproof design of the GCSand GVV Series Canopy Lighters make themideal for schools, recreation areas, garages,hotels/motels and institutions.AVAILABLELamp IncludedFeaturesHousingHousings are made of a die-cast heavy aluminum,coated with a polyester powder coat. Available witheither standard or tamperproof screws.BallastHigh-pressure sodium fixtures are supplied witheither a 120V NPF reactor ballast (optional HPFavailable) or high-power factor multi-tap ballast.Metal halide fixtures are provided with highreactanceor CWA multi-tap ballasts. A 480V ballastis available in 175 wall metal halide only. Thefluorescent utilizes a 120V normal power factorballast for the 13W version. All other CFL fixuturesare supplied with a 120/277V electronic Ballast.Photometric Data(Isofootcandle Plots)8” GCSLampsThe GCS Series utilizes twin 9W fluorescent ormedium base HPS or metal halide lamps. The GVVSeries uses twin 13W fluorescent, 4-pin quad CFL,medium base HPS or metal halide lamps.OpticsThe clear prismatic polycarbonate refractor, with UVinhibitors, minimizes discoloration.Mounting OptionsThe GCS and GVV fixtures are designed for ceilingmounting to concrete and steel only and are ULlisted for wet locations.12” GVVCFLListed for Wet LocationsConsult Factory for CUL AvailabilityDimensionsApprox.A B C D E Ship Wt.GCS Series 8.6” 8.6” 8” 9” 7.4” 15 lbs.GVV Series 12” 12” 12” 12.5” 8.5” 17 lbs.A70W HPS GCS Series at 10’ mounting height.8” Square PrismaticPhotometric Data150W HPS GVV Series at 15’ mounting height.12” Square PrismaticPhotometric DataBCurve #: GCS507.IESLamp: High Pressure SodiumWattage: 70WLumens: 6,300Lens: PolycarbonateCurve #: GVV515.IESLamp: High Pressure SodiumWattage: 150WLumens: 16,000Lens: Polycarbonate0900908080D25060070705001200E75060180060505010002400C125040300040010 2030010 2030212 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

GCS/GVV Series 8” & 12” Square Canopy LightersGCS Series Ordering InformationHousing Size (sq.) Wattage Lamp Catalog Number8” 50W PS/MH GCS3805-M*70W PS/MHGCS3807-M*35W HPS (NPF)GCS3503-1*(b) NPF50W HPSGCS3505-(a)(b)70W HPSGCS3507-(a)(b)(2) 9W CFL GCS3329-1*26W CFLGCS3326-D*32W CFLGCS3332-D*42W CFLGCS3342-D**See Voltage belowVoltage (a) Options (b) (Factory Installed) Accessories: (Field-Installed)1 = 120V HPS Only (NPF)M = Multi-tap tapped @ 277VD = Dual-tap 120/277V (CFL only)HPF = High Power Factor (120V HPS only)GVV Series Ordering InformationHousing Size (sq.) Wattage Lamp Catalog Number12” 50W PS/MH GVV3805-M*(b)70W PS/MHGVV3807-M*(b)100W PS/MH GVV3810-M*(b)150W PS/MH GVV3815-M*(b)175W MHGVV3417-M*(b)50W HPSGVV3505-(a)(b)70W HPSGVV3507-(a)(b)100W HPSGVV3510-(a)(b)150W HPSGVV3515-(a)(b)(2) 13W CFL (120V only) GVV3323-1*(2) 26W CFL GVV3352-D*(2) 32W CFL GVV3364-D*(2) 42W CFL GVV3384-D*GCS-TS = Tamperproof Screws (not shown)GCS-TSD = Tamperproof Screwdriver & Screws(not shown)HID LIGHTING – WALLPACKS & GARAGE LIGHTERS*See Voltage belowVoltage (a) Options (b) (Factory Installed) Accessories: (Field-Installed)1 = 120V (HPS, NPF only)5 = 480V (175W MH only)M = Multi-tap; tapped @ 277VD = Dual-tap 120/277V (CFL only)HPF = High Power Factor (120V HPS only)Q = Quartz Standby - Hot/Cold Type(50W - 150W only)WT = WhiteGVV-TS = Tamperproof Screws (not shown)GVV-TSD = Tamperproof Screwdriver & Screws(not shown)ExampleGCS 3 3 26 DSeries Mounting Light Source Wattage VoltageGCS = 8” Square 3 = Ceiling 3 = CFL 26 = 26W D = Dual tapCanopy LighterCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com213

GR Series 11” & 15” Round Canopy LightersHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:GRS 35 - 70WGRM 35 - 150WLamp IncludedSpreading illumination efficiently at low tomedium mounting heights (8 to 15’), the GRSand GRM Series Canopy Lighters’ round designblends easily into most architectural elements.FeaturesHousingHousings are constructed of heavy gauge steel andfinished with a five-stage powder coat finish inbronze. A neoprene gasket seals out moisture, dust,and insects.BallastHigh-pressure sodium fixtures are supplied witheither a 120V NPF reactor ballast (optinal HPFavailable) or high-power factor multi-tap ballast.Metal halide fixtures are provided with highreactanceor CWA multi-tap ballasts. The fluorescentutilizes a 120V normal power factor ballast.Photometric Data(Isofootcandle Plots)11” GRSLampsMedium base lamps are provided on all highpressuresodium and metal halide fixtures. The lampis mounted horizontally. Twin fluorescent lamps arealso available: 9W for the GRS and 13W for theGRM.OpticsThe multi-patterned injection molded polycarbonaterefractor contains ultra violet inhibitors thatminimize discoloration. Tamperproof screwsavailable.Mounting OptionsPrimarily utilized in ceiling mounted applicationsrequiring a UL wet label certification.The GRS andGRM Series fixtures can also be wall mounted withUL damp label certification. A 1/2” knock out nearthe center of the housing back, as well as four 1/2”knock outs evenly spaced around sidewalls, provideconduit access for wiring.15” GRM30'20' 10' 0 10' 20' 3030'20' 10' 0 10' 20' 3030'30'.5120'20'DimensionsListed for Wet LocationsApprox.A B C D E Ship Wt.GRS Series 11” 11” 9.5” 11” 7.375” 14 LBS.GRM Series 15” 15” 13.06” 15” 8” 16 LBS.A10'0'10'20'30'.1.3.5150W HPS GRS Series at 8’ mounting height.11” Round PrismaticPhotometric Data310'0'10'20'30'.3150W HPS GRM Series at 15’ mounting height.15” Round PrismaticPhotometric Data73BCurve #: GRS505.IESLamp: High Pressure SodiumWattage: 50WLumens: 4,000Lens: PolycarbonateCurve #: GRM515.IESLamp: High Pressure SodiumWattage: 150WLumens: 16,000Lens: Polycarbonate0 900908080600600707012001200CD180060180060505024002400E3000010 2030403000010 203040214 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

GLX Series 12” Garage LighterHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:50 - 175W55°C Ambient RatedLamp IncludedWhile only 12” high, the GLX Series GarageLighter delivers maximum light distributionfrom its acrylic refractor. Designed for the lowprofile needs of parking garages, it is the perfectsecurity fixture.Listed for Wet LocationsConsult Factory for CUL AvailabilityFeaturesHousingThe bronze die-cast aluminum housing has apolyester powder coat finish that resists corrosion aswell as the dirt and oil compounds normally found inparking garages.BallastAll fixtures are supplied with a high-power factor,high-reactance or CWA ballast.LampsThe GLX Series is available in 175W metal halide,50 - 175W pulse start metal halide and 50W - 150WHPS lamp types. All lamps are supplied in a mediumbase.OpticsThe strong acrylic prismatic refractor delivers lightconsistently in a 360° pattern and its vertical burnlamp provides maximum light output. The extrathick non-yellowing acrylic lens resists the abusetypical of parking facilities. The 175W metal halidelens is high-temperature acrylic.Mounting OptionsThe exclusive adjustable slide box mounts directlyto a 3/4” threaded conduit or a standard 4”round box. This allows the GLX series fixture to besafely disconnected from the junction box, makingmaintenance and/or replacement both quickand easy.Photometric Data(Isofootcandle Plots)12” GLX60'40'20'0'20'40'60'60'.1.340' 20' 0 20' 40' 60.51150W HPS GLX Series at 15’ mounting height.12” Prismatic Photometric DataCurve #: 36-123-01Lamp: High Pressure SodiumWattage: 150WLumens: 16,000Lens: AcrylicIES DistributionType II (narrow)180º 170º 160º 150º 140º 130º3120ºDimensionsLens Fixture Fixture Approx.Width Width Height Ship Wt.GLX Series 8” 12.7” 12” 15 LBS.0110º100º90º80º12”2,00070º60º8”4,00050ºTop View6,00040º0º 10º 20º 30º12.7”216 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

GLX Series 12” Garage LighterGLX Series Ordering InformationHousing Size (sq.) Wattage Lamp Catalog NumberSlide BoxCatalog NumberHook, Cord & Plug12” 175W MH GLX0417-(a)(b) GLX2417-(a)(b)50W PS/MH GLX0805-(a)(b) GLX2805-(a)(b)70W PS/MH GLX0807-(a)(b) GLX2807-(a)(b)100W PS/MH GLX0810-(a)(b) GLX2810-(a)(b)150W PS/MH GLX0815-(a)(b) GLX2815-(a)(b)175W PS/MH GLX0817-(a)(b) GLX2817-(a)(b)50W HPS GLX0505-(a)(b) GLX2505-(a)(b)70W HPS GLX0507-(a)(b) GLX2507-(a)(b)100W HPS GLX0510-(a)(b) GLX2510-(a)(b)150W HPS GLX0515-(a)(b) GLX2515-(a)(b)Voltage (a) Options (b) (Factory Installed) Accessories: (Field-Installed)For hook, cord & plug, specify voltage:1 = 120V*2 = 277V*3 = 208V*4 = 240V*5 = 480V5 = 480V (175W only)M = Multi-tap (tapped @ 277V)*Contact factory for other lengthsQ = Quartz Standby (100-175W only)WT = White HousingGLX-PM06 = Pendant Mount 6”*A HK SC = HookMountingsAccessoriesSlide Box onFixture TopOrderingCode 0Hook, Cord& PlugOrderingCode 2Pendant MountHID LIGHTING – WALLPACKS & GARAGE LIGHTERSExampleGLX 0 8 05 M WTOrdering CodeGLX-PM06Series Mounting Light Source Wattage Voltage OptionsGLX = 11” RoundCanopy Lighter0 = Hard wire 8 = PS/MH 05 = 50W M = Multi-tap WT = White HousingCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com217

GBX Series 12” Garage LighterHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:50 - 175WWhile only 12” high, the GBX Series GarageLighter delivers maximum light distributionfrom its acrylic refractor. Designed for the lowprofile needs of parking garages, it is the perfectsecurity fixture.55°C Ambient RatedLamp IncludedFeaturesHousingThe bronze die-cast aluminum housing has apolyester powder coat finish that resists corrosion aswell as the dirt and oil compounds normally found inparking garages.BallastAll fixtures are supplied with a high-power factor,high-reactance or CWA ballast.LampsThe GBX Series is available in 175W metal halide,50 - 175W pulse start metal halide and 50W - 150WHPS lamp types. All lamps are supplied in a mediumbase.OpticsThe prismatic glass lens, in conjunction with thevertical burn lamp, provides maximum lightdistribution and output. The extra thick prismaticglass lens is tempered.Photometric DataMounting OptionsThe exclusive adjustable slide box mounts directlyto a 3/4” threaded conduit or a standard 4”round box. This allows the GBX series fixture to besafely disconnected from the junction box, makingmaintenance and/or replacement both quick andeasy. The 6” wall mount arm option incorporates a5” x 5” flange for surface mounting. A 105°C leadwire is provided to connect inside a junction box.(Isofootcandle Plots)Listed for Wet LocationsConsult Factory for CUL Availability12” GBXSL FIXTURESGBX0417-MDimensionsLens Fixture Fixture Approx.Width Width Height Ship Wt.GBX Series 11.2” 12.7” 12.37” 15 lbs.CAST ALUMINUM HOUSING,FORMED WHITE ENAMELSTEEL REFLECTORCLEAR PRISMATIC C73 GLASS LENSONE CLEAR VENTUREMH175/U/MED 175 WATT ED17METAL HALIDE RATEDAT 14,000 LUMENS12.37”Top View11.20”Horizontal footcandlesScale1 square = 10 feetLight Loss Factor 1.00Total Lumens per Luminaire 14,000Mounting Height12 feetMaximum Calculated Value13.72 FcArrangementSingle12.7”218 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

GBX Series 12” Garage LighterGBX Series Ordering InformationHousing Size (sq.) Wattage Lamp Catalog NumberSlide BoxCatalog NumberHook, Cord & PlugCatalog Number 6”Wall Mount Arm12” 175W MH GBX0417-(a)(b) GBX2417-(a)(b) GBX4417-(a)(b)50W PS/MH GBX0805-(a)(b) GBX2805-(a)(b) GBX4805-(a)(b)70W PS/MH GBX0807-(a)(b) GBX2807-(a)(b) GBX4807-(a)(b)100W PS/MH GBX0810-(a)(b) GBX2810-(a)(b) GBX4810-(a)(b)150W PS/MH GBX0815-(a)(b) GBX2815-(a)(b) GBX4815-(a)(b)175W PS/MH GBX0817-(a)(b) GBX2817-(a)(b) GBX4817-(a)(b)50W HPS GBX0505-(a)(b) GBX2505-(a)(b) GBX4505-(a)(b)70W HPS GBX0507-(a)(b) GBX2507-(a)(b) GBX4507-(a)(b)100W HPS GBX0510-(a)(b) GBX2510-(a)(b) GBX4510-(a)(b)150W HPS GBX0515-(a)(b) GBX2515-(a)(b) GBX4515-(a)(b)Voltage (a) Options (b) (Factory Installed) Accessories: (Field-Installed)For hook, cord & plug, specify voltage:1 = 120V*2 = 277V*3 = 208V*4 = 240V**Supplied with Multi-tap ballasts5 = 480V175W onlyM = Multi-taptapped @ 277VQ = Quartz Standby (100-175W only)WT = White HousingGBX-PM = Pendant Mount 6”A HK SC = HookMountingsSlide Box onFixture TopOrderingCode 0Hook, Cord& PlugOrderingCode 26” WallMount ArmHID LIGHTING – WALLPACKS & GARAGE LIGHTERSAccessoriesExamplePendant MountGBX 0 5 07 M WTSeries Mounting Light Source Wattage Voltage OptionsOrdering CodeGBX-PMGB X = 12” GarageLighter0 = Hard wire 5 = HPS 07 = 70W M = Multi-tap WT = White HousingCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com219

CF Series 12” & 16” Canopy FixtureHID LIGHTING – WALLPACKS & GARAGE LIGHTERSWattage Range:50 - 400WIdeally suited for indoor parking areas, canopiesor walkways with a mounting height above 15’.Also ideal for building-mounted security lighting.DARK SKYLamp IncludedDark Sky compliant whenmounted in down positionListed for Wet LocationsConsult Factory for CUL AvailabilityFeaturesHousingThe seamless, die cast aluminum housing is standardwith a weather-resistant bronze polyester powdertopcoat. The doorframe fits flush with the housing.Complete silicon gasketing between door andhousing provides a watertight seal. Removablehinged door supports easy maintenance.BallastAll fixtures are standard with high-power factormulti-tap or 480V ballasts.LampsThe M Series utilizes mogul base lamps. To increaselight levels by 20%, specify a position-orientedsocket using an MS400/HOR lamp. The CFS utilizesmedium base lamps.LensAll CF Series fixtures are supplied with C73 prismaticglass for ideal performance and light distribution.OpticsThe CF Series reflector comes standard withhammertone aluminum optics.WiringA knockout is located in the ballast compartment ofthe CFM housing. Additional knockouts are locatedon the sidewalls of the CFM housing. The CFS housinghas multiple knockouts for mounting to junctionboxes.Mounting OptionsThree knockouts located in the base of the castaluminum housing are provided to mount the fixtureto steel, concrete ceiling or canopy. Not suitable formounting to ceilings with combustible material.Photometric Data(Isofootcandle Plots)CF30'20'10'0'10'20'30'30'20' 10' 0 10' 20' 30.510320400W MH CF Series at 15’ mounting height.71DimensionsFixture Fixture Fixture Approx.Length Width Depth Ship Wt.CFS Series 12.4” 12.4” 5.25” 18 lbs.CFM Series 16.4” 16.4” 7.0” 32 lbs.LSpecial Gasket and Knockoutfeatures on the Canopy Fixturesmake for easy adaptability andfixture placement.WD220 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

CF Series Canopy Fixture Ordering InformationHousing Size (sq.) Wattage Lamp Catalog Number12” 50W PS/MH CFS0805-(a)(b)70W PS/MHCFS0807-(a)(b)100W PS/MHCFS0810-(a)(b)150W PS/MHCFS0815-(a)(b)175W MHCFS0417-(a)(b)50W HPSCFS0505-(a)(b)70W HPSCFS0507-(a)(b)100W HPSCFS0510-(a)(b)150W HPSCFS0515-(a)(b)16” 175W MH CFM0417-(a)(b)200W PS/MHCFM0820-(a)(b)250W MHCFM0425-(a)(b)250W PS/MHCFM0825-(a)(b)320W PS/MHCFM0832-(a)(b)350W PS/MHCFM0835-(a)(b)400W MHCFM0440-(a)(b)400W PS/MHCFM0840-(a)(b)400W MS/HORCFM0740-(a)(b)70W HPSCFM0507-(a)(b)100W HPSCFM0510-(a)(b)150W HPSCFM0515-(a)(b)250W HPSCFM0525-(a)(b)400W HPSCFM0540-(a)(b)Note: Not suitable for mounting to ceilings with combustible material.Voltage (a) Options (b) (Factory Installed) Accessories: (Field-Installed)5 = 480VM = Multi-tap tapped @ 277VFusing(x)F = Single - Specify voltage (x):1 = 120V; 2 = 277V(x)J = Dual - Specify voltage (x):3 = 208V; 4 = 240V; 5 = 480VQ = Quartz Standby (Includes Q lamp) Nondelay-relay typeWT = White Housing (Custom Colors Available:Consult factory for pricing and delivery.)Note: HID wattage must be higher than quartzstandby wattage.WG-12 = 12” Wire GuardVS-12 = 12” Vandal ShieldWG-16 = 16” Wire GuardVS-16 = 16” Vandal ShieldCF Series 12” & 16” Canopy FixtureMountingsAccessoriesCeiling MountWire GuardOrdering Code 12”:WG-1216”: WG-16Vandal ShieldOrdering Code12”: VS-1216”: VS-16HID LIGHTING – WALLPACKS & GARAGE LIGHTERSExampleCFS 0 5 07 M WTSeries Mounting Light Source Wattage Voltage OptionsCFS = 12” Canopy 0 = Hard wire 5 = HPS 07 = 70W M = Multi-tap WT = White HousingFixtureCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com221