Genie Supreme Model 123 Datasheet - A1 Cbiss

Genie 123Supreme Membrane SeparatorThe Model 123 is ideal for applications requiringhigher flow rates or larger quantities of liquidthan the Genie Supreme Model 120 canwithstandKEYBENEFITS• Protection against liquids• On-line and portable analysers• GC’s, Mass Specs, O2, H2S, Moisture,and others• Superior analyser protection• Economical• Quick and easy membrane inspection• Spot, composite, or continuous gassampling in any process industryincluding natural gas, petrochemical,and oil refiningRemove Liquid Flow from SamplesThe Genie 123 offers a 2” diameter membrane, the same membranecross sectional area as the original Genie Model 130 or Genie Model130M, and it is ideal for removing unintermitted liquid flow from gassamples.Component ProtectionThe high flow rate capabilities of the Genie 123 allow it to be crosssuited for different purposes. It is also perfect for protecting componentssuch as “on-line” analysers, gas chromatographs, or mass spectrometers.This model is not available with the Liquid Block feature. If Liquid Blockfeature is desired, the Model 123HP should be selected.Additional information such as FAQs are available“The original brand known forsample conditioning andanalyser protection“

TECHNICALSPECIFICATIONPRESSURE RATINGS• Maximum pressure rating: 2,000 psig• Maximum recommended supply pressure:Lowest possible pressure consistent with applicationMAXIMUM TEMPERATURE• 185 ºF (85 °C) for Type 6/BTU membrane• 302 ºF (150 ºC) for Hi-Flow Backed membraneDIMENSIONS• Inlet, Outlet, & Bypass: 1/8” female NPTPARTBUILDERFLOW RATES• Maximum recommended membrane flow rate:5,130 cc/min for Type 6/BTU13,000 cc/min for Hi-Flow Backed membrane• Bypass flow rates: Requirement varies with applicationINTERNAL VOLUME• Total: 10.33 cc• Upstream of membrane: 5.4 cc• Downstream of membrane: 4.9 ccWETTED MATERIALS• Machined parts: 316 stainless steel / NACE compliant• All other metal parts: stainless steel / NACE compliant• Sealing material: Fluoroelastomer standard• Membrane: InertMODEL NUMBERING & ADDITIONAL PART NUMBERS• Sealing material 0 =fluoroelastomer 1 = perfluoroelastomer (other materials available upon request)• Membrane type 6 = Type 6/BTU 7 = Hi-Flow Backed• Mounting bracket accessory• O-ring replacementPart # 123-509-SS (sold separately)Part # 123-500 (sold separately)How to build the model number:How to build the membrane replacement kit:11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.comW: www.a1-cbiss.com Buy Online: shop.a1-cbiss.comCert No. 996ISO 9001