12.07.2015 Views

ERP 120/A - Balogh technical center

ERP 120/A - Balogh technical center

ERP 120/A - Balogh technical center

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Transceiver189, Rue d'Aubervilliers C.P. 97 75886 PARIS Cedex 18 FRANCETél : 33 (0)1.44.65.65.00 Fax : 33 (0)1.44.65.65.10http://www.balogh-group.comIDENTIFICATION SYSTEMS<strong>ERP</strong> <strong>120</strong>/ALOGIC .ID RANGEDESCRIPTION _____________________________________________________________________________The <strong>ERP</strong> <strong>120</strong>/A transceiver has a built-in air antenna (i.e. omnidirectional field).Connected with a BALOGH control board, it enables at a 125-kHz carrier frequency to:- read / write the E#/116 electronic tags (116-byte read/write code)- read the F#/32 electronic tags (32-bit random read-only code).LAYOUT _______________________________________________________________________________________________________<strong>ERP</strong> <strong>120</strong>/A - control board connection by a shielded cable (maximum cable length: 100 m).Warning : multiplexing the signals would produce damages.If the <strong>ERP</strong> <strong>120</strong>/A is mounted outdoors, the plug must face downwards.4 mm35 mmpin assignment1 + 24 V2 TR output3 TR input4 0 V5 shield142 mm128 mm<strong>120</strong> mm55 mm60 mm68 mm80 mm95 mm


TRANSMITTING CHARACTERISTICSNote: the data pertaining to the ∅50tags have been logged while a metalplane was located 20 mm behind.TAGSEE/116 ø50x1x5 EE/116 ø30x1 FE/32 FE/32read write read write ø50x1x5 ø30x1Recommended range Sr mm 75 45 60 35 75 60ZoneNominal range H mm 150 90 110 65 150 110static Typical length at Sr L mm 140 95 110 80 140 110Typical width at Sr l mm 90 65 70 50 90 70GENERAL CHARACTERISTICSELECTRICAL CHARACTERISTICSOperating temperature -25°C to +70°CWeight400 gProtection rating IP 65CaseABSPower supply voltageRange of voltageCurrent consumption24 VDC21 to 29 VDC(including ripple)400 mAASSEMBLY RECOMMENDATIONS50 mmThe transceiver <strong>ERP</strong><strong>120</strong>/A is not to bemounted directly in a recessed metal cavity.A minimum metal-free clearance is requiredround the transceiver:50 mm50 mm50 mmTo avoid interference between 2 transceivers, there must be a minimum space between them:about 2 m.BALOGH SA, 189 rue d'Aubervilliers CP97 75886 PARIS Cedex 18 FRANCE Tél : 33 (0)1 44 65 65 00 Fax : 33 (0)1 44 65 65 10S.A à Directoire au Capital de 800 000 € - R.C.B. PARIS 582 061 073Subject to modifications F-01-36-02-GB <strong>ERP</strong> <strong>120</strong>/A

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!