ACTi KCM-5211 Manual (PDF) - VoIPon Solutions

More documents

Recommendations

Info

KCM-5211 Hardware User’s ManualPower OnRestore to DefaultCompleteOn (3s)Off (about 15s)On1sOff (10~15s)Stay OnAbout 20 Seconds5) Audio Input / OutputThe IP device supports audio input and output with earphone jack6) Micro SD / Micro SDHC Card Slot*Insert your Micro SD card here for local recording on camera7) Power LEDThis LED light will indicate current camera status.8) Power InputIf you use Power Adaptor to run the device, please connect the power adaptor to the terminalblock in the way shown below.10www.acti.comVoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
KCM-5211 Hardware User’s ManualBasic ConnectionsFollow the procedures below to connect the IP device to the respective apparatuses.If you have a PoE(Power over Ethernet) supported switch or injector:1) Connect your IP Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45connector.2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.If your switch does not support PoE, and you are powering the camera with poweradaptor:1) Connect the power adaptor to IP Box Camera2) Connect IP device’s Ethernet port to Network switch (via RJ45 connectors).Connect a PC to the Ethernet switch (via RJ45 connectors)Please refer to our PoE Guide for more details on Power over Ethernet related concepts.11www.acti.comVoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Page 2 and 3: KCM-5211 Hardware User’s ManualTa
Page 8 and 9: KCM-5211 Hardware User’s ManualPh
Page 12 and 13: KCM-5211 Hardware User’s ManualPr
Page 14 and 15: KCM-5211 Hardware User’s Manual2.
Page 16 and 17: KCM-5211 Hardware User’s ManualIf
Page 18: KCM-5211 Hardware User’s Manual18

ACTi KCM-5211 Manual (PDF) - VoIPon Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?