Avaya-G450 PBX Solution Communication Manager - Sonus Networks

4 Phase II – Configuring Sonus SBC 5100This section provides a “snapshot” of Sonus SBC 5100 configuration used during compliance testing.Sonus SBC 5100 is typically configured for customers by Sonus Networks. The screenshots andpartial configuration supplied by Sonus Networks, is provided only for reference. Other configurationsare possible.This is the basic configuration that is required to invoke the Logical Interfaces for signaling andmedia.1. Configure Address Context and Logical Interface.set addressContext a1 ipInterfaceGroup LIF2 ipInterface pkt1_v4 ceNameNBS51K1 portName pkt1 ipAddress 172.16.104.160 prefix 24set addressContext a1 ipInterfaceGroup LIF2 ipInterface pkt0_v4 modeinService state enabledcommit2. Configure the Zone and SIP Signaling port.set addressContext a1 zone Z1 id 2 sipSigPort 1 ipInterfaceGroupNameLIF1 ipAddressV4 172.16.103.160set addressContext a1 zone Z1 sipSigPort 1 transportProtocolsAllowedsip-tcp portNumber 5060set addressContext a1 zone Z1 sipSigPort 1 mode inService state enabledcommit3. Verify Configuration using the show command.[edit]admin@NBS51K1% show addressContext a1 zone Z2 sipSigPortsipSigPort 2 {ipInterfaceGroupName LIF2;ipAddressV4 172.16.104.160;portNumber 5060;modeinService;stateenabled;transportProtocolsAllowed sip-udp;}[ok][2012-03-07 03:33:12][edit]admin@NBS51K1%Sonus Networks Interoperability Test Lab 39 of 52