LoadMaster 80

Rapidtrak * ApplicationsPhone: 1-800-554-8466Website: www.linearactuators.comThe width of an assembly fixture is adjusted by the touchof a button. When combined with a programmable indexerseveral positions can be preset and recalled in any order.The Rapidtrak units are mechanically synchronized tomaintain the parallel sides of the fixture.Rapidtrak units can also be used as parts feeders. Thisillustration shows a unit feeding round bars into a weldingprocess. The advantage of the Rapidtrak is the easilycontrollable rate of feed that may beachieved with feedback and a variablespeed control on the motor.A Rapidtrak is used for slicing products precisely with themotion controlled by a servo motor and control. This easilyallows changes in the operation for a variety of materialsto be processed.For this welding fixturethe Rapidtrak unit ismounted upside down andthe fixture plate is fastened tothe bottom of the profile. The armthat supports the welding head is attached tothe sleigh and bends around the profile. The metalplates to be welded are placed over the positioning pinsand the welding head is moved along the length.C-12©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.** Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.