LoadMaster 80

Turbo Module 2GEPhone: 1-800-554-8466Website: www.linearactuators.comBelt Driven Rodless ActuatorsTurbo Module* Multi-Axis OptionsHigh Speed Multi Axis PositioningThe Turbo Module 2GE system provides the basis for multi-axis motion control.The built-in flexibility of the T-slots in the base and the carriage allow for quickand easy x-y, x-z and x-y-z assembly and positioning capability. The illustrationsbelow provide a sampling of the types of configurations that can be achieved.In many cases a SuperSlide ball screw actuated system can be used to providean additional axis of motion. Adapter plates can be provided for the mountingof each system. For your next multi-axis application contact Danaher Motionapplication engineering.2GE-2X-Y2GE-X-Z2GE-2X-Z2GE-2X-Y-ZC-38©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.** Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.