Fruits and Vegetables Grading and Marking Rules, 2012 - Agmarknet

More documents

Recommendations

Info

Class -IIpercent of the total surface area, providedthat such blemishes have healed and do notaffect the keeping quality.The defect must not affect the pulp.This class includes bottle gourds which do notqualify for inclusion in the higher classes butsatisfy the minimum requirements. Provided thatthe following do not amount to defect, namely:-- deformation other than serious seeddevelopment;- defects in colour up to one-twentieth of thesurface;- considerable discoloration in the affected partare not allowed;- healed cracks not affecting the pulp;- slight damage caused by rubbing andhandling not exceeding 10 percent of the totalsurface area, provided which does notseriously affect the keeping quality andappearance.- Slight pale colour due to ground touchingduring growth.The defects must not affect the flesh.10 % by number orweight of bottlegourd notsatisfying therequirements ofthe grade, butmeeting theminimumrequirements.4. Other requirements:(i)Bottle gourd must have been carefully picked and have reached anappropriate degree of development and display satisfactory maturity inaccordance with criteria proper to the variety and to the area in which they aregrown. The development and condition of the bottle gourd must be such asto enable them;- to withstand transport and handling, and- to arrive in satisfactory condition at the place of destination.(ii)The content of each package must be uniform and contain only bottle gourdsof the same origin, variety, quality, size, same degree of maturity anddevelopment.14
(iii)(iv)(v)Bottle gourds must be packed sufficiently tightly so as to avoid damage duringtransport.In case of short bottle gourd, it shall be marked on the package “Early bottlegourd”.Bottle gourd may be marked as per shape.-- Cylindrical- Club shaped- Globular- Goose-necked- Elongated- Oblong- Flattened- Cervical5. Provision Concerning Sizing:(A) size is determined by the length or weight of the bottle gourd.(i) Length:Size Code Length in cmwithout peduncleAupto20B 21-30C 31- 40D 41-50E51and above(ii) Weight:Size Code Weight in gramsA Below 200B 201-400C 401-600D 601-800E 801-1000F 1001-1200G 1201-1500H Above 1500Size code G&H shall not be applicable for extra class and class-I.(B) Size tolerances:15
Page 4 and 5: 3. Criteria For Grade Designation:G
Page 6 and 7: (v)(vi)(vii)- in regular layers acc
Page 8 and 9: Schedule-XLIVGRADE DESIGNATION AND
Page 10 and 11: Provided that the following do not
Page 12 and 13: Schedule-XLVGRADE DESIGNATION AND Q
Page 16 and 17: For all classes: 10% by number or w
Page 18 and 19: height of the arc: 10 mm per 15 cm
Page 20 and 21: 5. Provisions Concerning Sizing:(A)
Page 22 and 23: 3. Criteria For Grade Designation:G
Page 24 and 25: (iii)(iv)(v)(vi)Cucumbers must be p
Page 26 and 27: 3. Criteria For Grade Designation:
Page 28 and 29: StripedWhiteIt shall be marked on t
Page 30 and 31: Schedule-XLIXGRADE DESIGNATION AND
Page 34 and 35: SCHEDULE-LGRADE DESIGNATION AND QUA
Page 37: (iv)(v)(vi)In case of short “snak

Fruits and Vegetables Grading and Marking Rules, 2012 - Agmarknet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?