installation

® ®Bandpassing the Midrange• The Fanatic Component Systems are optimized for full range music reproduction.In cases where a subwoofer is used, the midrange can be bandpassed inorder to prevent overlapping frequencies from the midrange into the subwoofer.1.Determine the frequency range that the subwoofer will play (i.e.: 20Hz-80Hz)2.Use the low-pass crossover frequency of the subwoofer system (i.e.: 80Hz) asthe high-pass crossover frequency for the midrange3.Select the appropriate capacitor value (i.e.: 500µF) to properly bandpass themidrange4.Place the capacitor in series with the “+” terminal of the speakerINSTALLATION- + - + - +INPUT MIDRANGE TWEETERC1+–0dB–3dBSubwoofer Midrange Tweeter80Hz6dB/octave HPFrequency Speaker(Hertz) (4 ohms)C180Hz 500µF100Hz 400µF130Hz 300µF200Hz 200µF260Hz 150µF400Hz 100µF– 10 –