EC/ECS

Analysentechnik mit System72.1 ELECTRICAL CONNECTIONSNOTE!Attention must be paid to the requirements of VDE 0100 when setting UP highpowerelectrical units with nominal voltages of up to 1000V together with theassociated standards and stipulations.Check the details on the type plate to ensure that the cooler is connected up to thecorrect mains voltage!The electrical connection of the digital temperature display happens on the EC/ECS control board(see operation manual EC/ECS).The temperature display is already equipped with all necessary cables.The following steps must be done:• loosen up the fixing screws of the cover of the plastic housing and remove the cover;The cables of the digital temperature display have to be connected as follows:digital temperature displaycable [colour]Meaning8-channel connectorclamp pointyellow + 10V 11brown 0V 12green 1mV/°C 10white 0V 9Mounting instruction 3-4.1-EE95 - Digital Temperature DisplaySubject to technical modifications.© M&C Jun. 02 Reproduction of this document or its content is not allowed without permission from M&C.