EC/ECS

6Analysentechnik mit System1 INTRODUCTIONThe patented M&C EC/ECS gas cooler unit is always to be installed in situations where there isinterference from moisture in the gas to be measured.Reduction of the gas temperature inside the cooler to a stable and very low dew point effects acondensing-out of the sample gas.2 APPLICATIONFigure 1 shows a typical example of an application for installation of an EC/ECS gas cooler unit."Sample gasin%EC+5°C!# $*CheckgasinCollecting vessel&)' (# Filter sample probe SP... * 3-way ball valve ' Super-fine filter FP...$ Heated sample line & Peristaltic pump ( Aerosol filter CLF% EC/ECS cooler ) Membrane pump ! Flow meter FM 10" AnalyserFigure 1 Example of application of EC/ECSThe gas to be measured is taken from the EC/ECS gas cooler % by a gas sample probe # andcooled down to a dew point of +5°C. The super-fine filter ' located afterwards removes solidparticles. For increased operating safety of the entire system we recommend installing a super-finefilter ' with a liquid alarm sensor. If required an aerosol filter ( can be installed in front of the flowmeter !. The gas thus treated can now be passed into the analyser ".Operating Instructions 3-4.1-ME 9501 - Electric Gas Cooler EC/ECSSubject to technical modifications.© M&C May 2002 Reproduction of this document or its content is not allowed without permission from M&C.